Reasons for the fatigue of ball attachments and their O-rings: A systematic review.

The ball attachments and their O-rings used for the retention and stabilization of overdentures showed a decrease in retention as the number of cycles increased. This fact resulted in a decrease in the retention of the prosthesis. The purpose of this study was to evaluate the fatigue resistance of ball attachments through a systematic review. An electronic search was performed using the Cochrane Library, LILACS, PubMed, ScienceDirect, and Web of Science databases. The search was conducted based on the PICOS framework. The inclusion criteria involved in the search comprised research articles written in English and published between the years 2000 and 2020. In the final selection, 18 articles were included in the review. Most of these studies performed the fatigue retention tests using parallel implants without angles. However, some studies used different angles to analyze the fatigue retention values. With the passage of time, the wear results in deformation and, as a consequence, a decrease in the retention of most attachments, leading to treatment failure. The main factor to be considered is the loss of retention of these components and their low durability. The loss of retention is due to large extent to the materials used to manufacture the attachments and O-rings, the size and angulation of the implants, and the length of the prosthesis. Future research is needed to further elucidate the reasons for the failure of the attachments.

Association between depression and temporomandibular dysfunction in adults - a systematic review.

OBJECTIVE: To critically evaluate the literature and answer the question: "Is there an association between depression and temporomandibular disorder (TMD) in adults?" METHODS: The personalized search strategy was applied to PubMed, Embase, Web of Science, and Scopus databases. Articles were selected in two stages according to the eligibility criteria. The Joanna Briggs Institute (JBI) tool was used to analyze the risk of bias according to the type of study. RESULTS: The included articles presented a moderate risk of bias. Based on the studies, individuals with TMD have higher levels of depression compared to the control group. There is also a direct association in that individuals with depression are more susceptible to developing TMD. CONCLUSION: There is a probable association between depression and TMD in adults. However, more studies with high methodological quality are needed to confirm this finding.

Influence of Er:YAG laser irradiation on surface properties of Ti-6Al-4V machined and hydroxyapatite coated.

Surface treatment by laser irradiation can change the topography of titanium; however, little is known about the changes it causes when applied to other coatings. This study aimed to evaluate the influence of Er:YAG laser irradiation on the surface properties of titanium-aluminum-vanadium (Ti-6Al-4V) discs. Four Ti-6Al-4V surfaces were evaluated (n = 10): CON-control, machined without surface treatment; LT-machined + laser treatment; HA-hydroxyapatite coating; and LT-HA-hydroxyapatite coating + laser treatment. For the laser treatment, an Er:YAG laser with a wavelength of 2940 nm, a frequency of 10 Hz, and an energy density of 12.8 J/cm2 was used. The morphology of the coating was investigated by scanning electron microscopy and the surface composition by energy-dispersive X-ray spectroscopy. The influence of laser irradiation treatment on roughness and wettability was also evaluated. The Er:YAG laser promoted a significant reduction in the roughness Sa (p < 0.05) and in the contact angle (p = 0.002) of the LT surface compared to the CON surface. On the LT-HA surface, a significant decrease in roughness was observed only for the Rz parameter (p = 0.015) and an increase in the contact angle (p < 0.001) compared to the HA surface. The use of the Er:YAG laser with the evaluated parameters decreased the surface roughness and improved the wetting capacity of machined without surface treatment. In the group with hydroxyapatite coating, the laser influenced the surface roughness only for the parameter Rz and reduced their wetting capacity.

Mechanical performance of 3-dimensionally printed resins compared with conventional and milled resins for the manufacture of occlusal devices: A systematic review.

STATEMENT OF PROBLEM: Digital methods for manufacturing occlusal devices provide advantages over conventional techniques, but information about the mechanical properties of 3-dimensionally (3D) printed resins is scarce. PURPOSE: The purpose of this systematic review was to evaluate the literature to determine whether 3D-printed resins for occlusal devices present satisfactory mechanical performance when compared with milled and conventional heat polymerized and autopolymerized resins. MATERIAL AND METHODS: This systematic review followed the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol and was registered in the Open Science Framework. The search strategy was applied without restriction of time and language to Embase, PubMed, Scopus, Science Direct, and Web of Science databases, and to the nonpeer-reviewed literature in ProQuest and Google Scholar. The selection process was conducted independently in 2 stages by 2 reviewers according to the eligibility criteria. The risk of bias was analyzed by using a checklist of important parameters to be considered. The systematic review considered the population, intervention, comparison, outcome, studies (PICOS) format, where population was resins for 3D printing of occlusal devices, intervention was inherent characteristics of the resin, comparison was conventional heat polymerized, autopolymerized, and milled resins, outcome was mechanical performance, and studies were in vitro experimental studies. RESULTS: A total of 1430 articles were found with the search strategy. After removing 182 duplicates found in Rayyan, the title and abstract of 1248 articles were evaluated, of which 37 articles were screened from the databases, 23 were selected for full reading, and 6 met the eligibility criteria and were included in this review; 1 had a low risk of bias and 5 had a moderate risk. An additional search of the reference list of included articles did not result in the inclusion of any articles. A quantitative meta-analysis could not be performed because of the heterogeneity of the included studies regarding the type of resin used and the method for evaluating mechanical performance. CONCLUSIONS: Resins for 3D printing had satisfactory mechanical performance for interocclusal devices when compared with conventional heat polymerized and autopolymerized resins, except for hardness. Milled resins were better than 3D-printed resins in hardness, wear resistance, flexural strength, flexural modulus, and fracture resistance when printing angle and thickness were not considered. Further development is needed in terms of printing techniques and chemical composition, as they are important for optimal mechanical properties and clinical performance.

Effects of photobiomodulation on auriculotherapy points for sleep disorders, anxiety, and temporomandibular dysfunctions.

OBJECTIVE: The purpose of this study was to evaluatephotobiomodulation applied at auriculotherapy points forsleep disorder (SD) and anxiety related to temporomandibulardysfunction (TMD). METHODS: The study consisted of two groups of 20 participants: Auriculotherapy group (A) and Control Group(C). The participants responded to the RDC/TMD, Fletcher & Luckett questionnaires, and the Beck Anxiety Inventory to analyze TMD, SD, and anxiety before and after the treatment. RESULTS: The participants presented scores corresponding to mild to moderateanxiety (MDN = 17; CI = [13.16;22.31]) and after treatment, normalor non-existent anxiety (MDN = 9; CI = [8.76; 17.12]) (p = 0.005). There was no significant difference (p > 0.05) between the controland 20 auriculotherapy groups for TMD and SD. DISCUSSION: The results suggest that auriculotherapy was effective in the treatment of anxiety. However, it did not prove effective with the results of the SD and symptoms of TMD.

Is there any association between sleep disorder and temporomandibular joint dysfunction in adults? - A systematic review.

OBJECTIVE: To answer the question, "Is there any association between sleep disorder and temporomandibular joint dysfunction (TMD) in adults?" METHODS: This study followed PRISMA guidelines and was registered in PROSPERO. As eligibility criteria, observational studies that evaluated the association between sleep disorder and TMD were included. Exclusion criteria included a) studies that evaluated sleep quality and not the association of sleep disorders with TMD, b) experimental studies, book chapters, conference proceedings, and systematic reviews. The Joanna Briggs Institute tool was used to assess the risk of bias. RESULTS: In the literature search, 3425 articles were found. After the exclusion of duplicates, 2752 were selected for reading the title and abstract, of which 26 were read in full, and 18 met eligibility criteria. CONCLUSION: The association of sleep bruxism with TMD is controversial. While, for obstructive sleep apnea, insomnia, snoring, and gastroesophageal reflux, the analyzed studies showed a positive association.

Effect of photobiomodulation treatment on pain control in patients with temporomandibular dysfunction disorder: systematic review.

OBJECTIVE: To critically evaluate the literature and answer the question, "How effective is photobiomodulation treatment on pain control in patients with TMJ disorder?". METHODS: PRISMA, PubMed, Web of Science, Scopus, and Embase databases were used for the personalized search strategy. For risk of bias, Rob 2.0 for randomized clinical trials and ROBINS-I for non-randomized clinical trials were used. RESULTS: Eighty-four articles were found and, after removing duplicates, seventy one studies were included for titles and abstracts. For a full reading, 30 articles were selected and, according to the eligibility criteria, 24 remained for qualitative analysis. The studies showed a low risk of bias. Due to the heterogeneity of the studies, it was not possible to perform a meta-analysis. CONCLUSION: Photobiomodulation is an effective adjunct for the treatment of temporomandibular disorders, being a less invasive approach, safe, low-cost, and without side effects.

Influence of ß-AgVO3 nanomaterial incorporation on mechanical and microbiological properties of dental porcelain.

OBJECTIVE: To explore the effect of adding different percentages of nanostructured silver vanadate decorated with silver nanoparticles (ß-AgVO3) to dental porcelains, evaluating the antimicrobial activity and the influence on the mechanical properties. METHODS: Thirty-six specimens were made, for each concentration, control group, 0.5%, 1%, 2.5% and 5%, using two commercial brands: IPS InLine and Noritake Cerabien ZR. For the analysis of mechanical properties, the Vickers microhardness test and the roughness test were performed. For the antimicrobial analysis, the XTT and CFU assays were performed. RESULTS: There was a statistically significant difference between groups for mechanical and microbiological analyses. SIGNIFICANCE: The modification of dental porcelains, with the incorporation of ß-AgVO3, influenced the mechanical properties of the material and demonstrated antimicrobial activity at certain concentrations.

Assessment of neuromuscular fatigue through frequency analysis of the electromyographic signal of control participants and those with temporomandibular dysfunction treated with resilient or hard occlusal devices.

STATEMENT OF PROBLEM: Muscle hyperactivity that leads to neuromuscular fatigue can be evaluated by electromyography. Whether treatment with occlusal devices can restore neuromuscular balance to patients with temporomandibular disorders (TMDs) is unclear. PURPOSE: The purpose of this clinical study was to evaluate neuromuscular fatigue by analyzing the frequency of the electromyographic signal of the masseter and anterior temporalis muscles on both sides in healthy participants and those with TMD treated with a resilient or hard occlusal device. MATERIAL AND METHODS: One hundred asymptomatic participants and 30 with TMD were divided into 2 groups: treated with a hard device or treated with a resilient device. All underwent electromyographic examination before and after treatment with the occlusal devices. RESULTS: In both groups, the results showed statistically significant differences (P<.01) when the fatigue rate before and after treatment with an occlusal device was compared. CONCLUSIONS: Treatment with both types of occlusal device was efficient in reducing the rate of neuromuscular fatigue in patients with TMDs.

Incorporation of a ß-AgVO3 Semiconductor in Resin Cement: Evaluation of Mechanical Properties and Antibacterial Efficacy.

PURPOSE: This in vitro study aimed to investigate the effect of incorporating the semiconductor nanostructured silver vanadate decorated with silver nanoparticles (ß-AgVO3) in a dual-cure resin cement on the degree of conversion (DC), microhardness, roughness, color, adhesion properties before and after artificial aging, and antimicrobial efficacy. MATERIAL AND METHODS: Three test groups were established: control (without ß-AgVO3), with the incorporation of 2.5% and 5% (by weight) of ß-AgVO3 in dual-cure resin cement (Allcem, FGM). The degree of conversion was measured using Fourier transform infrared spectroscopy (FTIR). To evaluate roughness (n = 10), microhardness (n = 10), color (n = 10), and to perform agar disk diffusion (n = 8), disks of 6-mm diameter and 2-mm height were manufactured using the same concentrations. For the color and shear bond strength test (n = 6), orthodontic brackets (Morelli) were used, which were cemented to natural human enamel and evaluated before and after artificial aging via thermocycling at 5°C and 55°C for 1000 cycles. For color measurements, a portable spectrocolorimeter and the CIE-Lab method were used. Data were analyzed using Student's t-test, ANOVA, and Tukey's multiple comparisons with significance set at α = 0.05. RESULTS: Semiconductor incorporation did not influence the cements's DC. The incorporation of 2.5% and 5% of ß-AgVO3 resulted in a significant increase in Knoop microhardness and surface roughness. Significant changes were observed in the color of the specimens when the semiconductor was incorporated. Adhesion after aging remained within the clinically recommended values in all groups, and antimicrobial activity was observed against Staphylococcus aureus, Streptococcus mutans, and Enterococcus faecalis at both concentrations tested. CONCLUSION: It is suggested to incorporate the semiconductor ß-AgVO3 in the dual-cure resin cement at both concentrations. Moreover, the physical-mechanical properties remained satisfactory for the proposed application.

Relationship between temporomandibular dysfunctions, sleep disorders, and anxiety among dentistry students.

Introduction: This study aimed to evaluate the relationship between temporomandibular dysfunction (TMD), anxiety, and sleep disorder (DS) among dentistry students, relating the periods in which they are enrolled.Methods: The study consisted of 90 students: Group 1: 30 first-period students; Group 2: 30 fifth-period students; Group 3: 30 students from the ninth period. The participants responded to the RDC/TMD, Fletcher & Luckett questionnaires, and the Beck Anxiety Inventory to analyze symptoms of TMD, DS, and anxiety.Results: There was an association between TMD, DS, and the period studied. When related to moderate and severe anxiety, the group that had the highest incidence was Group 1 (first period students).Conclusion: The apprehension for what is new can influence the TMD and DS indices, while the greater concern for academic/professional performance can generate higher levels of anxiety.

Neuroscience contributes to the understanding of the neurobiology of temporomandibular disorders associated with stress and anxiety.

OBJECTIVE: This review proposes a neurobiological model for temporomandibular disorders (TMD) associated with stress and anxiety. METHODS: An electronic search was performed in the PubMed, Embase, and Web of Science databases. Articles published up to 2020 were selected. The search terms were the following: temporomandibular disorders, anxiety, stress, neurobiology of stress and anxiety, and orofacial pain. RESULTS: In total, there were 100 studies, which presented a total of 10 different analyses. The results were described, demonstrating the type of analysis that was performed on each item analyzed for a better understanding of the context. CONCLUSION: The conclusion is that the interactions between the masticatory system, temporomandibular joints (TMJs), and stomatognathic apparatus with "stress neuromatrix," "pain neuromatrix," "limbic system," and "neuroimmunoendocrine system" would produce the range of changes observed in neural connectivity and the diversity of symptoms presented in TMD.

Nanostructured silver vanadate decorated with silver particles and their applicability in dental materials: A scope review.

OBJECTIVES: The present study aims to evaluate which studies evaluated the effectiveness of incorporating silver vanadate into dental materials and to analyze the influence of this incorporation on antimicrobial activity and material properties. DATA: This review was led by the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) Checklist and the JBI Briggs Reviewers Manual to answer the following question:Does the nanostructured silver vanadate decorate with silver particles present anti-microbial activity when incorporated into dental materials without altering its mechanical properties? SOURCE: An electronic search without restriction on the dates or languages was performed in PubMed/MEDLINE, Web of Science, Lilacs, Scopus, and Embase up until 2020. The search was specified and limited to the use of the words "nanostructured silver vanadate" in double quotation marks. STUDY SELECTION: The initial search resulted in 55 articles. After an initial assessment and careful reading, 15 studies published between 2014 and 2020 were included in this review. CONCLUSIONS: With the present scope review, it was possible to observe the good interaction between AgVO3 and dental materials and have a clarity that it is possible to use them in different types of materials in order to reduce the probability of infections resulting from the biofilm that is installed in them.

Small Mammals as Carriers/Hosts of Leptospira spp. in the Western Amazon Forest.

Leptospira is a bacteria that causes leptospirosis and is transmitted through water, soil, or mud that is contaminated by the urine of infected animals. Although it is mainly associated with the urban environment, Leptospires also circulate in rural and wild environments. This study aimed to investigate the role of small mammals in leptospirosis epidemiology in the western Amazon, Brazil. In total, 103 animals from 23 species belonging to the orders Didelphimorphia and Rodentia were captured. Blood, kidney, and urine samples were collected and Microscopic Agglutination Test (MAT), lipL32 PCR, secY sequencing, and culturing were conducted. MAT was reactive on 1/15 sera, and no bacterial isolate was obtained. PCR yielded 44.7% positive samples from 16 species. Twenty samples were genetically characterized and identified as L. interrogans (n = 12), L. noguchii (n = 4), and L. santarosai (n = 4). No statistical association was found between the prevalence of infection by Leptospira spp. in small mammals within carrier/hosts species, orders, study area, and forest strata. Our results indicate a high prevalence of pathogenic Leptospira spp. in several rodent and marsupial species and report the first evidence of Leptospira spp. carrier/hosts in the Brazilian Western Amazon.

Effect of nanomaterial incorporation on the mechanical and microbiological properties of dental porcelain.

STATEMENT OF PROBLEM: Dental porcelain restorations are subject to biological failures related to secondary caries and periodontal disease leading to prosthesis replacement. PURPOSE: The purpose of this in vitro study was to explore the microbiological and mechanical properties of dental porcelain incorporated with different percentages of silver vanadate (ß-AgVO3) through microbiological analysis, roughness tests, and the Vickers microhardness test. MATERIAL AND METHODS: IPS InLine porcelain specimens were made by using a cylindrical Teflon matrix in the dimensions of 8×2 mm. For the control group, the porcelain was manipulated according to the manufacturer's instructions. The groups incorporating the nanomaterial were prepared with 2.5%, 5%, and 10% of ß-AgVO3, which was added proportionally by mass to the porcelain powder. In vitro microbiologic analysis, roughness tests, and the Vickers microhardness test were performed. RESULTS: Against Streptococcus mutans, the control group showed no inhibition halo (0 mm). All groups with AgVO3 showed a zone of inhibition, the highest for the group with 10% (30 mm) and then the groups with 2.5% (9 mm) and 5% (17 mm). For Vickers microhardness, no statistically significant difference (P<.05) was observed between the evaluated groups. The group with 10% of AgVO3 had the highest mean roughness and was statistically different (P<.001) from the other groups. CONCLUSIONS: Adding ß-AgVO3 to dental porcelain demonstrated antimicrobial effectiveness at all concentrations (2.5%, 5%, and 10%), with no effect on Vickers microhardness. The 10% group had higher roughness than the other groups.

NEOTROPICAL XENARTHRANS: a data set of occurrence of xenarthran species in the Neotropics.

Xenarthrans-anteaters, sloths, and armadillos-have essential functions for ecosystem maintenance, such as insect control and nutrient cycling, playing key roles as ecosystem engineers. Because of habitat loss and fragmentation, hunting pressure, and conflicts with domestic dogs, these species have been threatened locally, regionally, or even across their full distribution ranges. The Neotropics harbor 21 species of armadillos, 10 anteaters, and 6 sloths. Our data set includes the families Chlamyphoridae (13), Dasypodidae (7), Myrmecophagidae (3), Bradypodidae (4), and Megalonychidae (2). We have no occurrence data on Dasypus pilosus (Dasypodidae). Regarding Cyclopedidae, until recently, only one species was recognized, but new genetic studies have revealed that the group is represented by seven species. In this data paper, we compiled a total of 42,528 records of 31 species, represented by occurrence and quantitative data, totaling 24,847 unique georeferenced records. The geographic range is from the southern United States, Mexico, and Caribbean countries at the northern portion of the Neotropics, to the austral distribution in Argentina, Paraguay, Chile, and Uruguay. Regarding anteaters, Myrmecophaga tridactyla has the most records (n = 5,941), and Cyclopes sp. have the fewest (n = 240). The armadillo species with the most data is Dasypus novemcinctus (n = 11,588), and the fewest data are recorded for Calyptophractus retusus (n = 33). With regard to sloth species, Bradypus variegatus has the most records (n = 962), and Bradypus pygmaeus has the fewest (n = 12). Our main objective with Neotropical Xenarthrans is to make occurrence and quantitative data available to facilitate more ecological research, particularly if we integrate the xenarthran data with other data sets of Neotropical Series that will become available very soon (i.e., Neotropical Carnivores, Neotropical Invasive Mammals, and Neotropical Hunters and Dogs). Therefore, studies on trophic cascades, hunting pressure, habitat loss, fragmentation effects, species invasion, and climate change effects will be possible with the Neotropical Xenarthrans data set. Please cite this data paper when using its data in publications. We also request that researchers and teachers inform us of how they are using these data.

Abundance and composition of the medium to large-sized mammals in a private area of a REDD+ project in Acre, Brazil / Abundância e composição de mamíferos de médio e grande porte em uma área privada de projeto REDD+ no Acre, Brasil

Abstract: The implementation of private areas focused on conservation of species and habitats, combined with REDD+ policies, has become an important ally for biodiversity conservation, expanding the conservation areas of the most varied habitats, covering key groups such as large mammals, which are extremely important for the maintenance of ecosystem services. In the upper region of the Purus River in Acre, Brazil, an inventory was carried out using camera-traps, of medium and large mammals community in a private REDD+ area, known as the Purus Project. A total of 19 species of mammals were recorded with an effort of 1859 trap-nigths, including rare, endangered and key species. It is estimated that the richness for the area is of 22 species. Endangered and rare species such as the tapir (Tapirus terrestris) and the short-eared dog (Atelocynus microtis) presented high rates of relative abundance compared to other Conservation Units (UCs). The richness of medium to large-sized mammals recorded in the Purus Project underscores the importance of REDD+ in private areas for the conservation of this group, given the challenges for inclusion and creation of new protected areas. REDD+ projects in privates' areas become an important component for conservation of species and the connection between public conservation units favoring the spread of species and populations between areas, and consequently the gene flow.

Resumo: A implementação de áreas privadas voltadas para conservação de espécies e habitats, aliadas a políticas de REDD+, tem se tornado importante aliada para conservação da biodiversidade, ampliando as regiões de conservação dos mais variados habitats, abrangendo grupos chaves como grandes mamíferos, extremamente importantes para manutenção dos serviços ecossistêmicos. Na região do alto rio Purus, Acre, Brasil, foi realizado um inventário utilizando armadilhas fotográficas, da comunidade de mamíferos de médio e grande porte de uma área privada de REDD+, o Projeto Purus. Foram registradas 19 espécies de mamíferos, com um esforço de 1.859 armadilhas-noite, incluindo chaves, raras e ameaçadas de extinção. Estima-se que a riqueza esperada para a área seja de 22 espécies. Espécies ameaçadas e raras como a Anta (Tapirus terrestris) e o Cachorro-do-mato (Atelocynus microtis) apresentaram taxas de abundância relativa elevadas, comparadas com outras UCs. A riqueza de médios e grandes mamíferos registrados na região do Projeto Purus ressalta a importância de REDD+ em áreas privadas para conservação deste grupo, dado os desafios para inclusão e criação de novas áreas protegidas públicas. Assim projetos de REDD+ em áreas privadas se tornam um importante componente para conservação de espécies e para a conexão entre Unidades de Conservação públicas favorecendo a dispersão de espécies e populações entre áreas, e consequentemente o fluxo gênico.

Low level laser therapy as an adjunctive technique in the management of temporomandibular disorders.

The purpose of this study was to assess the effect of low level laser therapy on subjects with intra-articular temporomandibular disorders (IA-TMD), and to quantify and compare severity of signs and symptoms before, during, and after the laser applications. The sample consisted of 45 subjects randomly divided into three groups (G) of 15 subjects each: G-I: 15 individuals with IA-TMD submitted to an energy dose of 52.5 J/cm2; G-II: dose of 105.0 J/cm2; and G-III: placebo group (0 J/cm2). In all groups, the applications were performed on condylar points on the masseter and anterior temporalis muscles. Two weekly sessions were held for five weeks, totaling 10 applications. The assessed variables were: mandibular movements and painful symptoms evoked by muscle palpation. These variables were measured before starting the study, then immediately after the first, fifth, and tenth laser application, and finally, 32 days after completing the applications. The results showed that there were statistically significant differences for G-I and G-II at the level of 1% between the doses, as well as between assessments. Therefore, it was concluded that the use of low level laser increased the mean mandibular range of motion and reduced painful symptoms in the groups that received effective treatment, which did not occur in the placebo group.

Evaluation of Vickers hardness of different types of acrylic denture base resins with and without glass fibre reinforcement.

OBJECTIVE: To evaluate the Vickers hardness of different acrylic resins for denture bases with and without the addition of glass fibres. BACKGROUND: It has been suggested that different polymerisation methods, as well as the addition of glass fibre (FV) might improve the hardness of acrylic. MATERIALS AND METHODS: Five types of acrylic resin were tested: Vipi Wave (VW), microwave polymerisation; Vipi Flash (VF), auto-polymerisation; Lucitone (LT), QC20 (QC) and Vipi Cril (VC), conventional heat-polymerisation, all with or without glass fibre reinforcement (GFR) and distributed into 10 groups (n = 12). Specimens were then submitted to Vickers hardness testing with a 25-g load for 30 s. All data were submitted to anova and Tukey's HSD test. RESULTS: A significant statistical difference was observed with regard to the polymerisation method and the GFR (p < 0.05). Without the GFR, the acrylic resin VC presented the highest hardness values, and VF and LT presented the lowest. In the presence of GFR, VC resin still presented the highest Vickers hardness values, and VF and QC presented the lowest. CONCLUSIONS: The acrylic resin VC and VW presented higher hardness values than VF and QC resins. Moreover, GFR increased the Vickers hardness of resins VW, VC and LT.

Standardization of the electromyographic signal through the maximum isometric voluntary contraction.

The objective of this study was to analyze the electromyographic (EMG) data, before and after normalization. One hundred (100) normal subjects (with no signs and symptoms of temporomandibular disorders) participated in this study. A surface EMG of the masticatory muscles was performed. Two different tests were performed: maximum voluntary clench (MVC) on cotton rolls and MVC in intercuspal position. The normalization was done using the mean value of the EMG signal of the first examination. The coefficient of variation CV showed lower values for the standardized data. The standardization was effective in reducing the differences between records from the same subject and in different subjects.