Comparing methanol and glycerol as carbon sources for mainstream partial denitrification/anammox in an IFAS process.

This study explored the implementation of mainstream partial denitrification with anammox (PdNA) in the second anoxic zone of a wastewater treatment process in an integrated fixed film activated sludge (IFAS) configuration. A pilot study was conducted to compare the use of methanol and glycerol as external carbon sources for an IFAS PdNA startup, with a goal to optimize nitrogen removal while minimizing carbon usage. The study also investigated the establishment of anammox bacteria on virgin carriers in IFAS reactors without the use of seeding, and it is the first IFAS PdNA startup to use methanol as an external carbon source. The establishment of anammox bacteria was confirmed in both reactors 102 days after startup. Although the glycerol-fed reactor achieved a higher steady-state maximum ammonia removal rate because of anammox bacteria (1.6 ± 0.3 g/m2/day) in comparison with the methanol-fed reactor (1.2 ± 0.2 g/m2/day), both the glycerol- and methanol-fed reactors achieved similar average in situ ammonia removal rates of 0.39 ± 0.2 g/m2/day and 0.40 ± 0.2 g/m2/day, respectively. Additionally, when the upstream ammonia versus NOx (AvN) control system maintained an ideal ratio of 0.40-0.50 g/g, the methanol-fed reactor attained a lower average effluent TIN concentration (3.50 ± 1.2 mg/L) than the glycerol-fed reactor (4.43 ± 1.6 mg/L), which was prone to elevated nitrite concentrations in the effluent. Overall, this research highlights the potential for PdNA in IFAS configurations as an efficient and cost-saving method for wastewater treatment, with methanol as a viable carbon source for the establishment of anammox bacteria. PRACTITIONER POINTS: Methanol is an effective external carbon source for an anammox startup that avoids the need for costly alternative carbon sources. The methanol-fed reactor demonstrated higher TIN removal compared with the glycerol-fed reactor because of less overproduction of nitrite. Anammox bacteria was established in an IFAS reactor without seeding and used internally stored carbon to reduce external carbon addition. Controlling the influent ammonia versus NOx (AvN) ratio between 0.40 and 0.50 g/g allowed for low and stable TIN effluent conditions.

Virus inactivation in low ozone exposure water reuse applications.

In drinking water applications, an ozone exposure (Ct) based framework has been historically used to validate ozone disinfection. However, significant viral inactivation can be achieved with little to no measurable ozone exposure. Additionally, ozone exposure depends on multiple water quality variables as well as the calculation/ozone measurement method used. In this study, we evaluated alternative ozone monitoring frameworks as well as the impact of water quality variables on ozone decay kinetics and virus/coliform inactivation. Here we show that both change in UV254 absorbance and applied O3:TOC were well correlated with viral inactivation and these frameworks were resilient to changes in water quality. Both increasing temperature (12-30 °C) and pH (5.5-8.4) was shown to significantly increase the ozone decay rate and decreased the resulting ozone exposure by as much as ∼90% in the case of pH. However, due to the increased reaction rate of ozone with viruses at elevated temperature and pH, there was only a minor impact (∼20% in the case of pH) in overall disinfection performance for a given O3:TOC. These frameworks were also considered for variable source water with TOC (5-11 mg/L) and TSS (1.2-5.8 mg/L). Change in UV254 absorbance or applied ozone dose (mg/L) were the strongest indicators of disinfection performance for source waters of variable TOC, however site-specific testing may be needed to apply this framework. Challenge testing with influent nitrite indicated that ozone disinfection performance is significantly impacted (>50% reduction in inactivation) in the presence of nitrite thus enforcing the importance of accounting for this value in the applied ozone dose. Multi-point ozone dissolution was investigated as an alternative ozone application method that may present a benefit with respect to overall disinfection performance especially if nitrite was present. Developing and validating these alternative monitoring frameworks and ozone application methods is imperative in water reuse applications where unnecessary elevated ozone exposure may lead to harmful byproduct formation.

To what extent do water reuse treatments reduce antibiotic resistance indicators? A comparison of two full-scale systems.

Water reuse is an essential strategy for reducing water demand from conventional sources, alleviating water stress, and promoting sustainability, but understanding the effectiveness of associated treatment processes as barriers to the spread of antibiotic resistance is an important consideration to protecting human health. We comprehensively evaluated the reduction of antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARB) in two field-operational water reuse systems with distinct treatment trains, one producing water for indirect potable reuse (ozone/biologically-active carbon/granular activated carbon) and the other for non-potable reuse (denitrification-filtration/chlorination) using metagenomic sequencing and culture. Relative abundances of total ARGs/clinically-relevant ARGs and cultured ARB were reduced by several logs during primary and secondary stages of wastewater treatment, but to a lesser extent during the tertiary water reuse treatments. In particular, ozonation tended to enrich multi-drug ARGs. The effect of chlorination was facility-dependent, increasing the relative abundance of ARGs when following biologically-active carbon filters, but generally providing a benefit in reduced bacterial numbers and ecological and human health resistome risk scores. Relative abundances of total ARGs and resistome risk scores were lowest in aquifer samples, although resistant Escherichia coli and Klebsiella pneumoniae were occasionally detected in the monitoring well 3-days downgradient from injection, but not 6-months downgradient. Resistant E. coli and Pseudomonas aeruginosa were occasionally detected in the nonpotable reuse distribution system, along with increased levels of multidrug, sulfonamide, phenicol, and aminoglycoside ARGs. This study illuminates specific vulnerabilities of water reuse systems to persistence, selection, and growth of ARGs and ARB and emphasizes the role of multiple treatment barriers, including aquifers and distribution systems.

Comammox and unknown ammonia oxidizers contribute to nitrite accumulation in an integrated A-B stage process that incorporates side-stream EBPR (S2EBPR).

A novel integrated pilot-scale A-stage high rate activated sludge, B-stage short-cut biological nitrogen removal and side-stream enhanced biological phosphorus removal (A/B-shortcut N-S2EBPR) process for treating municipal wastewater was demonstrated with the aim to achieve simultaneous and carbon- and energy-efficient N and P removal. In this studied period, an average of 7.62 ± 2.17 mg-N/L nitrite accumulation was achieved through atypical partial nitrification without canonical known NOB out-selection. Network analysis confirms the central hub of microbial community as Nitrospira, which was one to two orders of magnitude higher than canonical aerobic oxidizing bacteria (AOB) in a B-stage nitrification tank. The contribution of comammox Nitrospira as AOB was evidenced by the increased amoB/nxr ratio and higher ammonia oxidation activity. Furthermore, oligotyping analysis of Nitrospira revealed two dominant sub-clusters (microdiveristy) within the Nitrospira. The relative abundance of oligotype II, which is phylogenetically close to Nitrospira_midas_s_31566, exhibited a positive correlation with nitrite accumulation in the same operational period, suggesting its role as comammox Nitrospira. Additionally, the phylogenetic investigation suggested that heterotrophic organisms from the family Comamonadacea and the order Rhodocyclaceae embedding ammonia monooxygenase and hydroxylamine oxidase may function as heterotrophic nitrifiers. This is the first study that elucidated the impact of integrating the S2EBPR on nitrifying populations with implications on short-cut N removal. The unique conditions in the side-stream reactor, such as low ORP, favorable VFA concentrations and composition, seemed to exert different selective forces on nitrifying populations from those in conventional biological nutrient removal processes. The results provide new insights for integrating EBPR with short-cut N removal process for mainstream wastewater treatment.

Side-Stream Enhanced Biological Phosphorus Removal (S2EBPR) enables effective phosphorus removal in a pilot-scale A-B stage shortcut nitrogen removal system for mainstream municipal wastewater treatment.

While the adsorption/bio-oxidation (A/B) process has been widely studied for carbon capture and shortcut nitrogen (N) removal, its integration with enhanced biological phosphorus (P) removal (EBPR) has been considered challenging and thus unexplored. Here, full-scale pilot testing with an integrated system combining A-stage high-rate activated sludge with B-stage partial (de)nitrification/anammox and side-stream EBPR (HRAS-P(D)N/A-S2EBPR) was conducted treating real municipal wastewater. The results demonstrated that, despite the relatively low influent carbon load, the B-stage P(D)N-S2EBPR system could achieve effective P removal performance, with the carbon supplement and redirection of the A-stage sludge fermentate to the S2EBPR. The novel process configuration design enabled a system shift in carbon flux and distribution for efficient EBPR, and provided unique selective factors for ecological niche partitioning among different key functionally relevant microorganisms including polyphosphate accumulating organisms (PAOs) and glycogen-accumulating organisms (GAOs). The combined nitrite from B-stage to S2EBPR and aerobic-anoxic conditions in our HRAS-P(D)N/A-S2EBPR system promoted DPAOs for simultaneous internal carbon-driven denitrification via nitrite and P removal. 16S rRNA gene-based oligotyping analysis revealed high phylogenetic microdiversity within the Accumulibacter population and discovered coexistence of certain oligotypes of Accumulibacter and Competibacter correlated with efficient P removal. Single-cell Raman micro-spectroscopy-based phenotypic profiling showed high phenotypic microdiversity in the active PAO community and the involvement of unidentified PAOs and internal carbon-accumulating organisms that potentially played an important role in system performance. This is the first pilot study to demonstrate that the P(D)N-S2EBPR system could achieve shortcut N removal and influent carbon-independent EBPR simultaneously, and the results provided insights into the effects of incorporating S2EBPR into A/B process on metabolic activities, microbial ecology, and resulted system performance.

Revisiting the role of Acinetobacter spp. in side-stream enhanced biological phosphorus removal (S2EBPR) systems.

We piloted the incorporation of side-stream enhanced biological phosphorus removal (S2EBPR) with A/B stage short-cut nitrogen removal processes to enable simultaneous carbon-energy-efficient nutrients removal. This unique configuration and system conditions exerted selective force on microbial populations distinct from those in conventional EBPR. Interestingly, effective P removal was achieved with the predominance of Acinetobacter (21.5 ± 0.1 %) with nearly negligible level of known conical PAOs (Ca. Accumulibacter and Tetrasphaera were 0.04 ± 0.10 % and 0.47 ± 0.32 %, respectively). Using a combination of techniques, such as fluorescence in situ hybridization (FISH) coupled with single cell Raman spectroscopy (SCRS), the metabolic tracing of Acinetobacter-like cells exerted PAO-like phenotypic profiling. In addition, comparative metagenomics analysis of the closely related Acinetobacter spp. revealed the EBPR relevant metabolic pathways. Further oligotyping analysis of 16s rRNA V4 region revealed sub-clusters (microdiversity) of the Acinetobacter and revealed that the sub-group (oligo type 1, identical (100 % alignment identity) hits from Acinetobacter_midas_s_49494, and Acinetobacter_midas_s_55652) correlated with EBPR activities parameters, provided strong evidence that the identified Acinetobacter most likely contributed to the overall P removal in our A/B-shortcut N-S2EBPR system. To the best of our knowledge, this is the first study to confirm the in situ EBPR activity of Acinetobacter using combined genomics and SCRS Raman techniques. Further research is needed to identify the specific taxon, and phenotype of the Acinetobacter that are responsible for the P-removal.

Modeling versatile and dynamic anaerobic metabolism for PAOs/GAOs competition using agent-based model and verification via single cell Raman Micro-spectroscopy.

Side-stream enhanced biological phosphorus removal process (S2EBPR) has been demonstrated to improve performance stability and offers a suite of advantages compared to conventional EBPR design. Design and optimization of S2EBPR require modification of the current EBPR models that were not able to fully reflect the metabolic functions of and competition between the polyphosphate-accumulating organisms (PAOs) and glycogen-accumulating organisms (GAOs) under extended anaerobic conditions as in the S2EBPR conditions. In this study, we proposed and validated an improved model (iEBPR) for simulating PAO and GAO competition that incorporated heterogeneity and versatility in PAO sequential polymer usage, staged maintenance-decay, and glycolysis-TCA pathway shifts. The iEBPR model was first calibrated against bulk batch testing experiment data and proved to perform better than the previous EBPR model for predicting the soluble orthoP, ammonia, biomass glycogen, and PHA temporal profiles in a starvation batch testing under prolonged anaerobic conditions. We further validated the model with another independent set of anaerobic testing data that included high-resolution single-cell and specific population level intracellular polymer measurements acquired with single-cell Raman micro-spectroscopy technique. The model accurately predicted the temporal changes in the intracellular polymers at cellular and population levels within PAOs and GAOs, and further confirmed the proposed mechanism of sequential polymer utilization, and polymer availability-dependent and staged maintenance-decay in PAOs. These results indicate that under extended anaerobic phases as in S2EBPR, the PAOs may gain competitive advantages over GAOs due to the possession of multiple intracellular polymers and the adaptive switching of the anaerobic metabolic pathways that consequently lead to the later and slower decay in PAOs than GAOs. The iEBPR model can be applied to facilitate and optimize the design and operations of S2EBPR for more reliable nutrient removal and recovery from wastewater.

Sidestream bio-P and mainstream anammox in a BNR process with upstream carbon capture.

The integration of biological phosphorus removal (bio-P) and shortcut nitrogen removal (SNR) processes is challenging because of the conflicting demands on influent carbon: SNR allows for upstream carbon diversion, but this reduction of influent carbon (especially volatile fatty acids [VFAs]) prevents or limits bio-P. The objective of this study was to achieve SNR, either via partial nitritation/anammox (PNA) or partial denitrification/anammox (PdNA), simultaneously with biological phosphorus removal in a process with upstream carbon capture. This study took place in a pilot scale A/B process with a sidestream bio-P reactor and tertiary anammox polishing. Despite low influent rbCOD concentrations from the A-stage effluent, bio-P occurred in the B-stage thanks to the addition of A-stage WAS fermentate to the sidestream reactor. Nitrite accumulation occurred in the B-stage via partial denitrification and partial nitritation (NOB out-selection), depending on operational conditions, and was removed along with ammonia by the tertiary anammox MBBR, with the ability to achieve effluent TIN less than 2 mg/L. PRACTITIONER POINTS: A sidestream reactor with sufficient fermentate addition enables biological phosphorus removal in a B-stage system with little-to-no influent VFA. Enhanced biological phosphorus removal is not inhibited by intermittent aeration and is stable at a wide range of process SRTs. Partial nitritation and partial denitrification are viable routes to produce nitrite within an A/B process with sidestream bio-P, for downstream anammox in a polishing MBBR.

Optimizing Ozone Disinfection in Water Reuse: Controlling Bromate Formation and Enhancing Trace Organic Contaminant Oxidation.

The use of ozone/biofiltration advanced treatment has become more prevalent in recent years, with many utilities seeking an alternative to membrane/RO based treatment for water reuse. Ensuring efficient pathogen reduction while controlling disinfection byproducts and maximizing oxidation of trace organic contaminants remains a major barrier to implementing ozone in reuse applications. Navigating these challenges is imperative in order to allow for the more widespread application of ozonation. Here, we demonstrate the effectiveness of ozone for virus, coliform bacteria, and spore forming bacteria inactivation in unfiltered secondary effluent, all the while controlling the disinfection byproduct bromate. A greater than 6-log reduction of both male specific and somatic coliphages was seen at specific ozone doses as low as 0.75 O3:TOC. This study compared monochloramine and hydrogen peroxide as chemical bromate control measures in high bromide water (Br- = 0.35 ± 0.07 mg/L). On average, monochloramine and hydrogen peroxide resulted in an 80% and 36% decrease of bromate formation, respectively. Neither bromate control method had any appreciable impact on virus or coliform bacteria disinfection by ozone; however, the use of hydrogen peroxide would require a non-Ct disinfection framework. Maintaining ozone residual was shown to be critical for achieving disinfection of more resilient microorganisms, such as spore forming bacteria. While extremely effective at controlling bromate, monochloramine was shown to inhibit TrOC oxidation, whereas hydrogen peroxide enhanced TrOC oxidation.

In vitro bioassays to monitor complex chemical mixtures at a carbon-based indirect potable reuse plant.

Potable water reuse technologies are used to treat wastewater to drinking water quality to help sustain a community's water resources. California has long led the adoption of potable water reuse technologies in the United States and more states are exploring these technologies as water resources decline. Reuse technologies also need to achieve adequate reductions in microbial and chemical contaminant risks to meet public health goals and secure public acceptance. In vitro bioassays are a useful tool for screening if reuse treatment processes adequately reduce toxicity associated with a range of chemical classes that are contaminants of concern. In this study, we used an aryl hydrocarbon receptor (AhR) and an estrogen receptor luciferase bioassay to detect the presence of dioxin-like and estrogenic compounds across a 3800 m3/d carbon-based indirect potable reuse plant that uses carbon-based treatment (SWIFT-RC). Our results demonstrate significant removal of dioxin-like compounds across the SWIFT-RC treatment train. Estrogenicity declined across the treatment train for some months but was extremely variable and low with many samples falling below the method quantification level; consequently, we were not able to reliably determine estrogenicity trends for SWIFT-RC. Comparing the bioanalytical equivalent concentrations detected in the SWIFT-RC water with established monitoring trigger levels from the state of California suggests that SWIFT-RC produced water that met the bioassay guidelines. The log total organic carbon concentration and AhR assay equivalent concentrations are weakly correlated when data across all SWIFT-RC processes are included. Overall, this research demonstrates the performance of in vitro bioassays at a demonstration-scale carbon-based IPR system and highlights both the potential utility and challenges associated with these methods for assessing system performance.

Coupling physical selection with biological selection for the startup of a pilot-scale, continuous flow, aerobic granular sludge reactor without treatment interruption.

This study removes two technical constraints for transitioning full-scale activated sludge infrastructure to continuous flow, aerobic granular sludge (AGS) facilities. The first of these is the loss of treatment capacity as a result of the rapid washout of flocculent sludge inventory and in turn the potential loss of nitrification during initial AGS reactor startup. The second is the physical selector design which currently is limited to either the complex sequencing batch reactor selection or sidestream hydrocyclones. Briefly, real wastewater data collected from this study suggested that by increasing the surface overflow rate (SOR) of an upflow clarifier to 10 m h - 1, the clarifier can be taken advantage of as a physical selector to separate flocculant sludge from AGS. Redirecting the physical selector underflow and overflow sludge to the feast and famine zones of a treatment train, respectively, can create a biological selection that not only promotes AGS formation but also safeguards the effluent quality throughout the AGS reactor startup period. This study provides a novel concept for economically implementing continuous flow AGS within existing full-scale, continuous flow treatment trains.

An advanced synergy of partial denitrification-anammox for optimizing nitrogen removal from wastewater: A review.

Anammox is a widely adopted process for energy-efficient removal of nitrogen from wastewater, but challenges with NOB suppression and NO3- accumulation have led to a deeper investigation of this process. To address these issues, the synergy of partial denitrification and anammox (PD-anammox) has emerged as a promising solution for sustainable nitrogen removal in wastewater. This paper presents a comprehensive review of recent developments in the PD-anammox system, including stable performance outcomes, operational parameters, and mathematical models. The review categorizes start-up and recovery strategies for PD-anammox and examines its contributions to sustainable development goals, such as reducing N2O emissions and saving energy. Furthermore, it suggests future trends and perspectives for improving the efficiency and integration of PD-anammox into full-scale wastewater treatment system. Overall, this review provides valuable insights into optimizing PD-anammox in wastewater treatment, highlighting the potential of simultaneous processes and the importance of improving efficiency and integration into full-scale systems.

Impact of instrumentation reliability on mainstream suspended partial denitrification-anammox (PdNA).

This study successfully revealed the importance of probe reliability and sensitivity with ion sensitive electrode (ISE) probes on achieving high partial denitrification (PdN) efficiency; and decreasing carbon overdosing events that cause the decline of microbial populations and performance of PdNA. In a mainstream integrated hybrid granule-floc system, an average PdN efficiency of 76% was achieved with acetate as the carbon source. Thauera was identified as the dominant PdN species; its presence in the system was analogous to instrumentation reliability and PdN selection and was not a consequence of bioaugmentation. Up to 27-121 mg total inorganic nitrogen/L/d, an equivalent of 18-48% of the overall total inorganic nitrogen removed, was achieved through the PdNA pathway. Candidatus Brocadia was the main anoxic ammonium oxidizing bacteria species that was seeded from sidestream and enriched and retained in the mainstream system with observed growth rates of 0.04-0.13 day-1 . Moreover, there was no direct negative impact of methanol's use for post-polishing on anoxic ammonium oxidizing bacteria activity and growth. PRACTITIONER POINTS: Stress testing with ISE sensors revealed the importance of probe reliability and sensitivity on PdN selection and PdNA performance. Up to 121 mg TIN/L/d was achieved via PdNA in a mainstream suspended hybrid granule-floc partial denitrification-anammox (PdNA) system. Candidatus Brocadia was the dominant AnAOB species with observed growth rates of 0.04-0.13 day-1. There was no direct negative impact of methanol's use for post-polishing on AnAOB activity and growth.

Co-Occurrence and Cooperation between Comammox and Anammox Bacteria in a Full-Scale Attached Growth Municipal Wastewater Treatment Process.

Cooperation between comammox and anammox bacteria for nitrogen removal has been recently reported in laboratory-scale systems, including synthetic community constructs; however, there are no reports of full-scale municipal wastewater treatment systems with such cooperation. Here, we report intrinsic and extant kinetics as well as genome-resolved community characterization of a full-scale integrated fixed film activated sludge (IFAS) system where comammox and anammox bacteria co-occur and appear to drive nitrogen loss. Intrinsic batch kinetic assays indicated that majority of the aerobic ammonia oxidation was driven by comammox bacteria (1.75 ± 0.08 mg-N/g TS-h) in the attached growth phase, with minimal contribution by ammonia-oxidizing bacteria. Interestingly, a portion of total inorganic nitrogen (∼8%) was consistently lost during these aerobic assays. Aerobic nitrite oxidation assays eliminated the possibility of denitrification as a cause of nitrogen loss, while anaerobic ammonia oxidation assays resulted in rates consistent with anammox stoichiometry. Full-scale experiments at different dissolved oxygen (DO = 2 - 6 mg/L) setpoints indicated persistent nitrogen loss that was partly sensitive to DO concentrations. Genome-resolved metagenomics confirmed the high abundance (relative abundance 6.53 ± 0.34%) of two Brocadia-like anammox populations, while comammox bacteria within the Ca. Nitrospira nitrosa cluster were lower in abundance (0.37 ± 0.03%) and Nitrosomonas-like ammonia oxidizers were even lower (0.12 ± 0.02%). Collectively, our study reports for the first time the co-occurrence and cooperation of comammox and anammox bacteria in a full-scale municipal wastewater treatment system.

Electron beam treatment for the removal of 1,4-dioxane in water and wastewater.

Electron beam (e-beam) treatment uses accelerated electrons to form oxidizing and reducing radicals when applied to water without the use of external chemicals. In this study, electron beam treatment was used to degrade 1,4-dioxane in several water matrices. Removal improved in the progressively cleaner water matrices and removals as high as 94% to 99% were observed at a dose of 2.3 kGy in secondary effluent. 1,4-dioxane removal was confirmed to be primarily through hydroxyl radical oxidation. The calculated electrical energy per order was found to be 0.53, 0.26, and 0.08 kWh/m3/order for secondary effluent (Avg. total organic carbon (TOC) 9.25 mg/L), granular activated carbon effluent (TOC 3.46 mg/L), and ultrapure water, respectively, with a 70% generation and transfer efficiency applied.

Enhancing bioflocculation in high-rate activated sludge improves effluent quality yet increases sensitivity to surface overflow rate.

High-rate activated sludge (HRAS) relies on good bioflocculation and subsequent solid-liquid separation to maximize the capture of organics. However, full-scale applications often suffer from poor and unpredictable effluent suspended solids (ESS). While the biological aspects of bioflocculation are thoroughly investigated, the effects of fines (settling velocity < 0.6 m3/m2/h), shear and surface overflow rate (SOR) are unclear. This work tackled the impact of fines, shear, and SOR on the ESS in absence of settleable influent solids. This was assessed on a full-scale HRAS step-feed (SF) and pilot-scale HRAS contact-stabilization (CS) configuration using batch settling tests, controlled clarifier experiments, and continuous operation of reactors. Fines contributed up to 25% of the ESS in the full-scale SF configuration. ESS decreased up to 30 mg TSS/L when bioflocculation was enhanced with the CS configuration. The feast-famine regime applied in CS promoted the production of high-quality extracellular polymeric substances (EPS). However, this resulted in a narrow and unfavorable settling velocity distribution, with 50% ± 5% of the sludge mass settling between 0.6 and 1.5 m3/m2/h, thus increasing sensitivity towards SOR changes. A low shear environment (20 s-1) before the clarifier for at least one min was enough to ensure the best possible settling velocity distribution, regardless of prior shear conditions. Overall, this paper provides a more complete view on the drivers of ESS in HRAS systems, creating the foundation for the design of effective HRAS clarifiers. Tangible recommendations are given on how to manage fines and establish the optimal settling velocity of the sludge.

Introducing bioflocculation boundaries in process control to enhance effluent quality of high-rate contact-stabilization systems.

High-rate activated sludge (HRAS) systems suffer from high variability of effluent quality, clarifier performance, and carbon capture. This study proposed a novel control approach using bioflocculation boundaries for wasting control strategy to enhance effluent quality and stability while still meeting carbon capture goals. The bioflocculation boundaries were developed based on the oxygen uptake rate (OUR) ratio between contactor and stabilizer (feast/famine) in a high-rate contact stabilization (CS) system and this OUR ratio was used to manipulate the wasting setpoint. Increased oxidation of carbon or decreased wasting was applied when OUR ratio was <0.52 or >0.95 to overcome bioflocculation limitation and maintain effluent quality. When no bioflocculation limitations (OUR ratio within 0.52-0.95) were detected, carbon capture was maximized. The proposed control concept was shown for a fully automated OUR-based control system as well as for a simplified version based on direct waste flow control. For both cases, significant improvements in effluent suspended solids level and stability (<50-mg TSS/L), solids capture over the clarifier (>90%), and COD capture (median of 32%) were achieved. This study shows how one can overcome the process instability of current HRAS systems and provide a path to achieve more reliable outcomes. PRACTITIONER POINTS: Online bioflocculation boundaries (upper and lower limit) were defined by the OUR ratio between contactor and stabilizer (feast/famine). To maintain effluent quality, carbon oxidation was minimized when bioflocculation was not limited (0.52-0.95 OUR ratio) and increased otherwise. A fully automated control concept was piloted, also a more simplified semiautomated option was proposed. Wasting control strategies with bioflocculation boundaries improved effluent quality while meeting carbon capture goals. Bioflocculation boundaries are easily applied to current wasting control schemes applied to HRAS systems (i.e., MLSS, SRT, and OUR controls).

Nitrogen removal capacity and carbon demand requirements of partial denitrification/anammox MBBR and IFAS processes.

A pilot study was conducted to investigate the carbon demand requirements and nitrogen removal capabilities of two mainstream partial denitrification/anammox (PdNA) processes: a two-zone, moving bed biofilm reactor (MBBR) process and an integrated fixed-film activated sludge (IFAS) process. The first MBBR zone conducted PdNA, while the second operated as an anammox zone. Operation of the IFAS process was conducted in two phases. The first phase of the operation involved minor external carbon addition, while the second phase of the operation involved controlled external carbon addition. The MBBR process produced an average effluent TIN concentration and chemical oxygen demand (COD)/TIN ratio of 2.81 ± 1.21 mg/L and 2.42 ± 0.77 g/g. The average effluent TIN concentrations and COD/TIN ratios for the IFAS process were 4.07 ± 1.66 mg/L and 1.08 ± 0.38 g/g during phase 1 and 3.30 ± 0.96 mg/L and 2.18 ± 0.99 g/g during phase 2. Despite having relatively low and unstable partial denitrification (PdN) efficiencies, both mainstream PdNA processes exhibited low effluent TIN concentrations and carbon requirements compared to nitrification/denitrification. Successful operation of the PdNA IFAS process indicates that mainstream PdNA can be implemented with minimal capital costs in a water resource recovery facility's second anoxic zone. PRACTITIONER POINTS: Low effluent TIN concentrations can be maintained in mainstream PdNA MBBR and IFAS processes with low external carbon demand. MBBR and IFAS PdNA processes do not require consistent or high PdN efficiencies to maintain low effluent TIN concentrations. IFAS and MBBR PdNA processes exhibit similar TIN and NH3 removal efficiencies. PdNA can be implemented in a second anoxic zone, using IFAS technology for anammox retention, with minimal capital costs.

Startup strategies for mainstream anammox polishing in moving bed biofilm reactors.

This study evaluated startup strategies for mainstream polishing anammox moving bed biofilm reactors (MBBRs) without anammox bacterial (AMX) biomass inoculation. Two types of startups were tested: anammox only (no external carbon addition) and partial denitrification/anammox (PdNA) with glycerol addition. Reactors were started with either virgin carriers or carriers with a preliminary biofilm from a mainstream aerobic integrated fixed-film activated sludge (IFAS) process. Three pilot-scale startups were completed under the following conditions: anammox-only with preliminary biofilm carriers, PdNA with preliminary biofilm carriers, and PdNA with virgin carriers. AMX presence was confirmed via quantitative polymerase chain reaction (qPCR) after 57, 57, and 77 days, respectively. Prior to AMX detection, average influent concentrations of ammonia and nitrite ranged from 1.7-2.7 mg/L and 0.98-1.8 mg/L, respectively. This study demonstrated that AMX can be grown on carriers without AMX seeding under mainstream conditions (temperature 17-29°C, low ammonia and nitrite), regardless of whether nitrite came from upstream or partial denitrification within the reactor. This study also showed that using preliminary biofilm carriers can decrease startup time by approximately 1 month. These results address critical questions for moving mainstream anammox processes to full-scale implementation, and suggest that PdNA MBBRs are feasible and sustainable for full-scale ammonia, nitrate, and nitrite polishing to meet stringent total nitrogen requirements. PRACTITIONER POINTS: This research will help utilities develop methods for starting up mainstream anammox MBBRs without the barrier of anammox biomass seeding. Preliminary biofilm carriers accelerated startup time in a PdNA MBBR, but a virgin carrier reactor started up in a similar timeframe, contrary to expectations. Also, contrary to expectations, high concentrations of ammonia and nitrite are not necessary for startup of an anammox or PdNA MBBR.

Investigating the use of anaerobically stored carbon in post-anoxic denitrification.

Significant methanol savings are hypothesized to result from anaerobic storage of internal carbon that is used for post-anoxic denitrification. An investigation into this internal carbon-driven denitrification was performed via a series of batch tests using biomass from Hampton Roads Sanitation District's (HRSD's) water resource recovery facilities (WRRFs): the Virginia Initiative Plant (VIP), Nansemond Plant (NP), and Army Base (AB) Treatment Plant. Internal carbon specific denitrification rates (SDNRs) increased during winter, by as much as 1 mg N/g MLVSS/h for VIP. Increasing the aeration time by 2-4 h lowered the SDNR by an average of 0.21-0.35 mg N/g MLVSS/h. No internal carbon denitrification was observed for biomass from non-nitrifying/denitrifying, biological phosphorus removal (bio-P) WRRFs. The increase in internal carbon SDNRs when the anaerobic acetate dose increased from 20 to 100 mg COD/L ranged from 0.06 to 0.28 mg N/g MLVSS/h. Higher phosphorus uptake rates were found to correlate to higher internal carbon SDNRs, but no significant post-anoxic P uptake was observed. The first steps are taken towards developing a strategy for full-scale implementation of this relatively novel type of denitrification by evaluating how some factors affect its occurrence. PRACTITIONER POINTS: Significant methanol savings at a full-scale facility may result from use of internally stored carbon for post-anoxic denitrification. Short aerobic HRTs and high anaerobic zone VFA loading increase the post-anoxic internal carbon-driven denitrification. Non-nitrifying, bio-P biomass is not capable of internal carbon-driven denitrification. Internal carbon-driven denitrification is correlated with the activity of polyphosphate accumulating organisms.