Ultrasound-Guided Injection Treatments Versus Surgical Neurectomy for Morton Neuroma: A Cost-Effectiveness Analysis.

BACKGROUND. Morton neuroma is a common, painful disorder of the foot with multiple treatment options of varying cost and effectiveness. OBJECTIVE. The aim of this study was to determine the most cost-effective treatment pathway for symptomatic Morton neuromas when conservative management has failed. METHODS. An incremental cost-utility analysis was performed comparing a direct to surgical neurectomy strategy with three selective injection strategies in which one or more ultrasound-guided injection therapies was tried first before surgery for patients who did not respond to treatment. The three selective injection strategies were selective steroid injection, selective alcohol injection, and selective steroid/alcohol injection in which both steroid injections and alcohol sclerosing injections were trialed successively before surgical neurectomy. The direct-to-surgery approach was compared with the three different selective injection strategies and with a no-treatment strategy in a decision-analytic model for a hypothetical group of patients with symptomatic Morton neuroma in whom conservative management had failed. Model parameters, including treatment costs, effectiveness, complication rates, and health utility states, were estimated from the literature, reimbursement databases, and expert opinion. The outcome was cost per quality-adjusted life year (QALY) with a time horizon of 3 years. A societal cost perspective was adopted with a willingness-to-pay threshold of $100,000/QALY. Sensitivity analyses for key model parameters were performed. RESULTS. For the base input values, the steroid/alcohol selective injection strategy was dominant and yielded an incremental cost-effectiveness ratio of $4401.61/QALY compared with no treatment. The probabilistic sensitivity analysis supported this strategy in 74% of 10,000 simulated trials. Results were robust with low sensitivity to most input parameters. However, when the probability of successful alcohol injection treatment dropped below 40%, the steroid selective injection strategy became most cost-effective. CONCLUSION. A trial of ultrasound-guided injection therapies for Morton neuroma is a cost-effective strategy compared with proceeding directly to surgical neurectomy. CLINICAL IMPACT. Ultrasound-guided injection therapies are indicated as first-line treatment of patients with symptomatic Morton neuromas when conservative management fails.

Applying a New CT Quality Metric in Radiology: How CT Pulmonary Angiography Repeat Rates Compare Across Institutions.

OBJECTIVES: To quantify overall CT repeat and reject rates at five institutions and investigate repeat and reject rates for CT pulmonary angiography (CTPA). METHODS: In this retrospective study, we apply an automated repeat rate analysis algorithm to 103,752 patient examinations performed at five institutions from July 2017 to August 2019. The algorithm identifies repeated scans for specific scanner and protocol combinations. For each institution, we compared repeat rates for CTPA to all other CT protocols. We used logistic regression and analysis of deviance to compare CTPA repeat rates across institutions and size-based protocols. RESULTS: Of 103,752 examinations, 1,447 contained repeated helical scans (1.4%). Overall repeat rates differed across institutions (P < .001) ranging from 0.8% to 1.8%. Large-patient CTPA repeat rates ranged from 3.0% to 11.2% with the odds (95% confidence intervals) of a repeat being 4.8 (3.5-6.6) times higher for large- relative to medium-patient CTPA protocols. CTPA repeat rates were elevated relative to all other CT protocols at four of five institutions, with strong evidence of an effect at two institutions (P < .001 for each; odds ratios: 2.0 [1.6-2.6] and 6.2 [4.4-8.9]) and somewhat weaker evidence at the others (P = .005 and P = 0.011; odds ratios: 2.2 [1.3-3.8] and 3.7 [1.5-9.1], respectively). Accounting for size-based protocols, CTPA repeat rates differed across institutions (P < .001). DISCUSSION: The results indicate low overall repeat rates (<2%) with CTPA rates elevated relative to other protocols. Large-patient CTPA rates were highest (eg, 11.2% at one institution). Differences in repeat rates across institutions suggest the potential for quality improvement.

A Multiinstitutional Study on Wasted CT Scans for Over 60,000 Patients.

OBJECTIVE. Repeated imaging is an unnecessary source of patient radiation exposure, a detriment to patient satisfaction, and a waste of time and money. Although analysis of rates of repeated and rejected images is mandated in mammography and recommended in radiography, the available data on these rates for CT are limited. MATERIALS AND METHODS. In this retrospective study, an automated repeat-reject rate analysis algorithm was used to quantify repeat rates from 61,102 patient examinations obtained between 2015 and 2018. The algorithm used DICOM metadata to identify repeat acquisitions. We quantified rates for one academic site and one rural site. The method allows scanner-, technologist-, protocol-, and indication-specific rates to be determined. Positive predictive values and sensitivity were estimated for correctly identifying and classifying repeat acquisitions. Repeat rates were compared between sites to identify areas for targeted technologist training. RESULTS. Of 61,102 examinations, 4676 instances of repeat scanning contributed excess radiation dose to patients. Estimated helical overlap repeat rates were 1.4% (95% CI, 1.2-1.6%) for the rural site and 1.1% (95% CI, 1.0-1.2%) for the academic site. Significant differences in rates of repeat imaging required because of bolus tracking (11.6% vs 4.3%; p < 0.001) and helical extension (3.3% vs 1.8%; p < 0.001) were observed between sites. Positive predictive values ranged from 91% to 99% depending on the reason for repeat imaging and site location. Sensitivity of the algorithm was 92% (95% CI, 87-96%). Rates tended to be highest for emergent imaging procedures and exceeded 9% for certain protocols. CONCLUSION. Our multiinstitutional automated quantification of repeat rates for CT provided a useful metric for unnecessary radiation exposure and identification of technologists in need of training.

The Current State of CT Dose Management Across Radiology: Well Intentioned but Not Universally Well Executed.

OBJECTIVE: Recent well-publicized sentinel events have resulted in an appropriately heightened awareness of CT dose. Concern also exists regarding the potential of CT dose increasing the risk of cancer. Several professional societies, governmental and accreditation agencies, and CT vendors have responded to these concerns with campaigns, mandatory standards, and software enhancements. The objective of this article is to review such CT dose management efforts. CONCLUSION: Although CT dose awareness campaigns, mandatory standards, and software enhancements are well intentioned, their implementation is often suboptimal.

CT protocol management: simplifying the process by using a master protocol concept.

This article explains a method for creating CT protocols for a wide range of patient body sizes and clinical indications, using detailed tube current information from a small set of commonly used protocols. Analytical expressions were created relating CT technical acquisition parameters which can be used to create new CT protocols on a given scanner or customize protocols from one scanner to another. Plots of mA as a function of patient size for specific anatomical regions were generated and used to identify the tube output needs for patients as a function of size for a single master protocol. Tube output data were obtained from the DICOM header of clinical images from our PACS and patient size was measured from CT localizer radiographs under IRB approval. This master protocol was then used to create 11 additional master protocols. The 12 master protocols were further combined to create 39 single and multiphase clinical protocols. Radiologist acceptance rate of exams scanned using the clinical protocols was monitored for 12,857 patients to analyze the effectiveness of the presented protocol management methods using a two-tailed Fisher's exact test. A single routine adult abdominal protocol was used as the master protocol to create 11 additional master abdominal protocols of varying dose and beam energy. Situations in which the maximum tube current would have been exceeded are presented, and the trade-offs between increasing the effective tube output via 1) decreasing pitch, 2) increasing the scan time, or 3) increasing the kV are discussed. Out of 12 master protocols customized across three different scanners, only one had a statistically significant acceptance rate that differed from the scanner it was customized from. The difference, however, was only 1% and was judged to be negligible. All other master protocols differed in acceptance rate insignificantly between scanners. The methodology described in this paper allows a small set of master protocols to be adapted among different clinical indications on a single scanner and among different CT scanners.

Compliance with AAPM Practice Guideline 1.a: CT Protocol Management and Review - from the perspective of a university hospital.

The purpose of this paper is to describe our experience with the AAPM Medical Physics Practice Guideline 1.a: "CT Protocol Management and Review Practice Guideline". Specifically, we will share how our institution's quality management system addresses the suggestions within the AAPM practice report. We feel this paper is needed as it was beyond the scope of the AAPM practice guideline to provide specific details on fulfilling individual guidelines. Our hope is that other institutions will be able to emulate some of our practices and that this article would encourage other types of centers (e.g., community hospitals) to share their methodology for approaching CT protocol optimization and quality control. Our institution had a functioning CT protocol optimization process, albeit informal, since we began using CT. Recently, we made our protocol development and validation process compliant with a number of the ISO 9001:2008 clauses and this required us to formalize the roles of the members of our CT protocol optimization team. We rely heavily on PACS-based IT solutions for acquiring radiologist feedback on the performance of our CT protocols and the performance of our CT scanners in terms of dose (scanner output) and the function of the automatic tube current modulation. Specific details on our quality management system covering both quality control and ongoing optimization have been provided. The roles of each CT protocol team member have been defined, and the critical role that IT solutions provides for the management of files and the monitoring of CT protocols has been reviewed. In addition, the invaluable role management provides by being a champion for the project has been explained; lack of a project champion will mitigate the efforts of a CT protocol optimization team. Meeting the guidelines set forth in the AAPM practice guideline was not inherently difficult, but did, in our case, require the cooperation of radiologists, technologists, physicists, IT, administrative staff, and hospital management. Some of the IT solutions presented in this paper are novel and currently unique to our institution.