A novel self-gripping long-term resorbable mesh providing temporary support for open primary ventral and incisional hernia.

A novel synthetic fully long-term resorbable self-gripping mesh has been recently developed to reinforce soft tissue where weakness exists during ventral hernia repair open procedures. This resorbable mesh is a macroporous, knitted, poly-L-lactide, poly-trimethylene carbonate copolymer monofilament mesh with the ProGrip™ technology, providing grips on one side of the mesh. A new poly-L-lactide, poly-trimethylene copolymer was developed to provide the required features for mechanical support during at least 20 weeks covering the critical healing period, including resistance to fatigue under cyclic loading conditions, as it occurs in patients. The yarns and mesh initial physical and biomechanical properties were characterized. Then, the mesh mechanical strength was evaluated over time. The mechanical properties of the proposed mesh were found to be above the generally recognized threshold value to mechanically support the repair site of a hernia over a 20-week period during in-vitro cyclic loading test. The mesh performance was evaluated in vivo using a published preclinical porcine model of hernia repair at 4-, 12- and 20-weeks post implantation. The burst strength of the hernia repair sites reinforced with the new mesh were higher at 4 & 12 weeks and comparable at 20 weeks to the one of the native abdominal walls. At all time points, the mesh was well tolerated with moderate inflammation and was fast integrated in the abdominal wall at 4 weeks. Particularly, the grips were nicely engulfed in the newly formed connective tissue. They must facilitate the anchoring of the mesh by their extension from the mesh and their mushroom shape. The preclinical data of the self-gripping resorbable mesh suggests that it has all the favorable characteristics for future clinical use during ventral hernia repair open procedures.

Standing laparoscopic abdominal lavage using a suction-irrigation device in 2 horses with primary suppurative peritonitis.

The use of a laparoscopic suction-irrigation device in 2 standing horses for lavage of the abdomen for the treatment of primary suppurative peritonitis is reported. Two horses were presented with a 1- to 2-week history of weight loss. Abdominocentesis revealed highly elevated total nucleated cell count. Peritoneal lavage systems were placed in both horses, but complications prevented adequate lavage. Both horses underwent standing laparoscopy; the dorsal abdomen was explored and the abdomen was profusely lavaged, using a suction-irrigation device. The procedure was efficient and allowed adequate visualization of the dorsal abdomen and lavage. A successful outcome was achieved in both cases. Key clinical message: Lavage of the abdomen of horses with peritonitis can be achieved under standing sedation, using a laparoscopic technique. In appropriately selected cases, this allows for adequate visualization of the dorsal abdomen and efficacious abdominal lavage.

Lavage abdominal laparoscopique debout à l'aide d'un dispositif d'irrigation par aspiration chez deux chevaux atteints de péritonite suppurée primaire. L'utilisation d'un dispositif laparoscopique d'irrigation par aspiration pour le lavage de l'abdomen pour le traitement d'une péritonite suppurée primaire chez deux chevaux debout est rapportée. Deux chevaux ont été présentés avec une histoire de 1 à 2 semaines de perte de poids. L'abdominocentèse a révélé un nombre total de cellules nucléées très élevé. Des systèmes de lavage péritonéal ont été placés chez les deux chevaux, mais des complications ont empêché un lavage adéquat. Les deux chevaux ont subi une laparoscopie debout; l'abdomen dorsal a été exploré, et l'abdomen a été abondamment lavé à l'aide d'un dispositif d'irrigation par aspiration. La procédure était efficace et permettait une visualisation adéquate de l'abdomen dorsal et un lavage. Une résolution positive a été obtenue dans les deux cas.Message clinique clé:Le lavage de l'abdomen de chevaux atteints de péritonite peut être réalisé sous sédation debout, en utilisant une technique laparoscopique. Dans des cas bien choisis, cela permet une visualisation adéquate de l'abdomen dorsal et un lavage abdominal efficace.(Traduit par Dr Serge Messier).

Characterization of an ovine bilateral critical sized bone defect iliac wing model to examine treatment modalities based on bone tissue engineering.

Critical sized bone defect (CSBD) animal models are used to evaluate and confirm efficacy and potency of new treatment modalities based on bone tissue engineering before the latter can be applied in clinical practice. In this study, a bilateral CSBD model in the iliac wings of sheep is described in detail. To demonstrate that this is a large animal CSBD model in sheep, bone healing within the defect left empty (negative control) or filled with autologous corticocancellous bone graft (clinical gold standard, positive control) was assessed using micro-CT, histology, histomorphometric, and fluorochrome analysis. After three months, new bone into the defect site was formed across the whole defect in the positive controls but limited to the edge of the defects in the negative controls. Bone volume in the positive controls was statistically higher than in the negative controls, with the latter having less than 10% new bone growth. There were no intraoperative or postoperative complications. The model described here represents a reliable and reproducible bilateral CSBD in sheep with low morbidity that can be used for in vivo evaluation of new treatment modalities based on bone tissue engineering.

Calcium phosphate based three-dimensional cold plotted bone scaffolds for critical size bone defects.

Bone substitutes, like calcium phosphate, are implemented more frequently in orthopaedic surgery to reconstruct critical size defects, since autograft often results in donor site morbidity and allograft can transmit diseases. A novel bone cement, based on ß-tricalcium phosphate, polyethylene glycol, and trisodium citrate, was developed to allow the rapid manufacturing of scaffolds, by extrusion freeform fabrication, at room temperature. The cement composition exhibits good resorption properties and serves as a basis for customised (e.g., drug or growth factor loaded) scaffolds for critical size bone defects. In vitro toxicity tests confirmed proliferation and differentiation of ATDC5 cells in scaffold-conditioned culture medium. Implantation of scaffolds in the iliac wing of sheep showed bone remodelling throughout the defects, outperforming the empty defects on both mineral volume and density present in the defect after 12 weeks. Both scaffolds outperformed the autograft filled defects on mineral density, while the mineral volume present in the scaffold treated defects was at least equal to the mineral volume present in the autograft treated defects. We conclude that the formulated bone cement composition is suitable for scaffold production at room temperature and that the established scaffold material can serve as a basis for future bone substitutes to enhance de novo bone formation in critical size defects.

The use of Reamer Irrigator Aspirator (RIA) autograft harvest in the treatment of critical-sized iliac wing defects in sheep: investigation of dexamethasone and beta-tricalcium phosphate augmentation.

Bone grafts are commonly used for the treatment of segmental bone defects and fracture non-unions. Recently, osseous particles obtained during intermedullary canal reaming (using a Reamer-Irrigator-Aspirator (RIA) device) have been evaluated as graft material during in vitro and clinical studies. The aim of this study was to evaluate and quantify new bone formation after implantation of bone graft material obtained after reaming of the tibia in a bilateral critical-sized iliac wing defect in sheep and to investigate the effect of the augmentation of this graft. A reamer bone graft alone, or after short term incubation in a dexamethasone enriched solution, and a reamer graft collected using beta-tricalcium phosphate (ß-TCP) granules in the filter of the RIA collection device were compared to autologous iliac wing graft. In addition, reamer graft was combined with the cellular fraction collected from the irrigation fluid with and without short-term incubation in a dexamethasone enriched solution. It was hypothesized that the amount of physical bone in the reamer bone graft groups would be higher than the amount in the autologous iliac wing graft group and that augmentation of a reamer bone graft would increase bone formation. Three months after implantation, the amount of new bone formation (as percentage of the total defect volume) in the defects was evaluated ex-vivo by means of micro-CT and histomorphometry. The mean amount of bone in the autologous iliac wing graft group was 17.7% and 16.8% for micro-CT and histomorphometry, respectively. The mean amount of bone in all reamer graft groups ranged between 20.4-29.2% (micro-CT) and 17.0-25.4% (histomorphometry). Reamer graft collected using ß-TCP granules (29.2±1.7%) in the filter produced a significantly higher amount of bone in comparison to an autologous iliac wing graft evaluated by micro-CT. RIA bone grafts added a small increase in bone volume to the 3month graft volume in this preclinical sheep model. The current model does not support the use of short-term high concentration dexamethasone for augmentation of a graft volume. If avoidance of an iliac wing graft is desirable, or a reaming procedure is required, then a RIA graft or RIA graft plus ß-TCP granules are as good as the current gold standard for this model.

In vitro evaluation of the torsional strength reduction of neonate calf metatarsal bones with Bicortical defects resulting from the removal of external fixation implants.

OBJECTIVE: To compare the torsional strength of calf metatarsal bones with defects produced by removal of 2 different implants. STUDY DESIGN: In vitro mechanical comparison of paired bones with bicortical defects resulting from the implantation of 2 different external fixation systems: the transfixation pin (TP) and the pin sleeve system (PS). SAMPLE POPULATION: Neonatal calf metatarsal bones (n = 6 pairs). METHODS: From each pair, 1 bone was surgically instrumented with 2 PS implants and the contralateral bone with 2 TP implants. Implants were removed immediately leaving bicortical defects at identical locations between paired metatarsi. Each bone was tested in torque until failure. The mechanical variables statistically compared were the torsional stiffness, the torque and angle at failure, and work to failure. RESULTS: For TP and PS constructs, respectively, there were no significant differences between construct types for any of the variables tested. Mean ± SD torsional stiffness: 5.50 ± 2.68 and 5.35 ± 1.79 (Nm/°), P = .75; torque: 57.42 ± 14.84 and 53.43 ± 10.16 (Nm); P = .34; angle at failure: 14.76 ± 4.33 and 15.45 ± 4.84 (°), P = .69; and work to failure 7.45 ± 3.19 and 8.89 ± 3.79 (J), P = .17). CONCLUSIONS: Bicortical defects resulting from the removal of PS and TP implants equally affect the investigated mechanical properties of neonate calf metatarsal bones.

Comparative biomechanical evaluation of a pin-sleeve transfixation system in cadaveric calf metacarpal bones.

OBJECTIVE: To compare proximal fragment displacement and the peri-implant strain using a pin-sleeve cast (PSC) system and a transfixation pin cast (TPC) system on a cadaveric calf metacarpal bone fracture model. STUDY DESIGN: Experimental. SAMPLE POPULATION: Cadaveric calf metacarpal bones (n = 6 pairs). METHODS: Paired samples were instrumented with either the TPC or the PSC systems. Strain gauges were applied proximal to the transfixation implants and the bones encased in cast material. The distal part of the construct was removed to mimic an unstable distal comminuted fracture. Constructs were fixed to the material testing machine and initially loaded in axial compression in their elastic range to determine construct stiffness. Constructs were loaded cyclically with a sinusoidal curve that increased until failure. Variables compared statistically between constructs were the initial construct stiffness and, at given load points, the mean metacarpal axial displacement in loading and unloading condition and mean axial strain. RESULTS: Initial construct mean ± SD axial stiffness was not significantly different between constructs (PSC: 689 ± 258; TPC: 879 ± 306 N/mm). There was no significant difference between either investigated displacements of metacarpal bones transfixed with PSC and those transfixed with TPC at all load points. The PSC constructs had a significant decrease in the recorded mean strain (502 ± 340 µstrain) compared to the TPC construct (1738 ± 2218 µstrain). CONCLUSIONS: The PSC significantly reduced peri-implant strain with comparable axial displacement to the TPC in cadaveric calf metacarpal bones.

Biomechanical and computational evaluation of two loading transfer concepts for pancarpal arthrodesis in dogs.

OBJECTIVE: To evaluate 2 plate designs for pancarpal arthrodesis and their effects on load transfer to the respective bones as well as to develop a computational model with directed input from the biomechanical testing of the 2 constructs. SAMPLE: Both forelimbs from the cadaver of an adult castrated male Golden Retriever. PROCEDURES: CT imaging was performed on the forelimb pair. Each forelimb was subsequently instrumented with a hybrid dynamic compression plate or a castless pancarpal arthrodesis plate. Biomechanical testing was performed. The forelimbs were statically loaded in the elastic range and then cyclically loaded to failure. Finite element (FE) modeling was used to compare the 2 plate designs with respect to bone and implant stress distribution and magnitude when loaded. RESULTS: Cyclic loading to failure elicited failure patterns similar to those observed clinically. The mean ± SD error between computational and experimental strain was < 15% ± 13% at the maximum loads applied during static elastic loading. The highest bone stresses were at the distal extent of the metacarpal bones at the level of the screw holes with both plates; however, the compression plate resulted in slightly greater stresses than did the arthrodesis plate. Both models also revealed an increase in bone stress at the proximal screw position in the radius. The highest plate stress was identified at the level of the radiocarpal bone, and an increased screw stress (junction of screw head with shaft) was identified at both the most proximal and distal ends of the plates. CONCLUSIONS AND CLINICAL RELEVANCE: The FE model successfully approximated the biomechanical characteristics of an ex vivo pancarpal plate construct for comparison of the effects of application of different plate designs.

Minimally invasive abdominal and thoracic surgery: principles and instrumentation.

Minimally invasive surgery, including laparoscopy, thoracoscopy, and endoscopic-assisted procedures, is becoming more common in veterinary medicine. The basic principles of laparoscopy and thoracoscopy involve gaining access to a cavity through small incisions, creating a workspace, and maneuvering extracorporeally activated instruments within that workspace.

Minimally invasive abdominal and thoracic surgery: techniques.

Laparoscopy, thoracoscopy, and other endoscopic-assisted procedures have many uses in veterinary medicine. Diagnosis and biopsy are currently the most common uses of minimally invasive techniques, but popularity for procedures such as ovariectomy, cancer staging, lung lobectomy, and pericardectomy is rising. This article touches on basic surgical procedures and describes some more advanced techniques.

Finite element analysis of a novel pin-sleeve system for external fixation of distal limb fractures in horses.

The transfixation pin cast (TPC) is an external skeletal fixation technique used to treat horses with distal limb fractures, but its use is often associated with pin-loosening and an increased risk of treatment failure. To address implant loosening, the pin sleeve cast system (PSC) was recently designed and consists of a pin-sleeve unit inserted into the bone. Each pin runs through a sleeve placed in the bone, making contact at two fixed points only within the sleeve. Each pin is attached to a ring embedded in a resin cast. In this report, the mechanical performance of a traditional TPC pin arrangement was compared with that of the PSC using validated finite element models of bone substitutes previously tested in vitro. The PSC resulted in a marked reduction in peak strain magnitude around the pins and a more even distribution of strain across the bone cortex. The two systems resulted in comparable proximal fragment displacement and had a similar stress concentration around bone defects during implant removal. The findings suggest that the PSC load transfer mechanism is effective even in geometrically complex structures like equine bones.

Injectable rhBMP-2-loaded chitosan hydrogel composite: osteoinduction at ectopic site and in segmental long bone defect.

Carriers for bone morphogenetic protein-2 (BMP-2) used in clinical practice still suffer from limitations such as insufficient protein retention. In addition, there is a clinical need for injectable carriers. The main objective of this study was to assess bone forming ability of rhBMP-2 combined either with chitosan hydrogel (rhBMP-2/CH) or chitosan hydrogel containing ß-tricalcium phosphate (ß-TCP) (rhBMP-2/CH/TCP). Formulations were first compared in a rat ectopic intramuscular bone formation model, and the optimal formulation was further evaluated in healing of 15-mm critical size defect in the radius of a rabbit. Three weeks after injection ectopically formed bone was analyzed by microcomputerized tomography (micro-CT) and histology. Significantly higher (4.7-fold) mineralized bone formation was observed in the rhBMP-2/CH/TCP group compared to rhBMP-2/CH group. In a pilot study, defect in a rabbit radius treated with rhBMP-2/CH/TCP showed incomplete regeneration at 8 weeks with composite leakage from the defect, indicating the need for formulation refinement when segmental defect repair is foreseen.

In vivo evaluation of the effect of intramedullary nail microtopography on the development of local infection in rabbits.

BACKGROUND AND AIM: Fractures of the tibia and femoral diaphysis are commonly repaired by intramedullary (IM) nails, which are currently composed of either electropolished stainless steel (EPSS) or standard, non-polished titanium-aluminum-niobium (TAN). Once the fracture has fully healed, removal of IM nails is common, but the strong adhesion of bone to standard TAN complicates removal. Polishing the surface of TAN IM nails has been shown to reduce bony adhesion and ease implant removal without compromising fixation. Polished TAN nails are, therefore, expected to have significant clinical benefit in situations where the device is to be removed. The aim of the present study was to determine the effect of polishing TAN IM nails on susceptibility to infection in an animal model. MATERIALS AND METHODS: Solid IM nails (Synthes, Betlach, Switzerland) composed of standard TAN were compared with polished equivalents and also to clinically available EPSS nails. The surface chemical and topographical properties of the materials were assessed by X-ray photon spectroscopy (XPS), white light profilometry, and scanning electron microscopy (SEM). An in vivo infection study was performed using a clinical isolate of Staphylococcus aureus that was characterized with respect to various virulence factors. RESULTS: Polishing TAN IM nails caused no significant change to the chemistry of the nails, but the topography of the polished TAN nails was significantly smoother than standard TAN nails. In the infection study, the rank order based on descending infectious dose 50 (ID(50)) was: standard TAN, polished TAN, and finally EPSS. The ID(50) values did not differ greatly between any of the groups. CONCLUSIONS: Polishing the surface TAN IM nails was not found to influence the susceptibility to infection in our animal model.

In vitro mechanical evaluation of a novel pin-sleeve system for external fixation of distal limb fractures in horses: a proof of concept study.

OBJECTIVE: To evaluate the efficacy of a novel pin-sleeve cast (PSC) system for external fixation of distal limb fractures in horses and to compare it with the transfixation pin cast (TPC) system. STUDY DESIGN: Experimental. SAMPLE POPULATION: One bone substitute each was used for the TPC and PSC systems. The PSC was tested in 4 configurations characterized by different pin preloads. METHODS: Specimens were loaded in axial compression in the elastic range. Variables compared statistically were: bone substitute axial displacement and axial strain measured above implants with strain gauges. Pin preload was correlated with the variables investigated. Load to failure and a fatigue tests supplemented the investigation. RESULTS: The PSC configuration with the highest pin preload showed a significantly lower axial displacement compared with the TPC. No significant differences were observed between all other PSC configurations and the TPC. All PSC systems had a significant decrease in recorded strain compared with the TPC system. Pin axial preload inversely correlated with axial displacement but had no effect on axial strain. In the failure test, the PSC encountered plastic deformation earlier than the TPC. In the fatigue test, the PSC ran >200,000 cycles. CONCLUSIONS: Preliminary in vitro tests showed that the PSC system significantly reduced peri-implant strain while concurrently having comparable axial displacement to the TPC system. CLINICAL RELEVANCE: The PSC system has the potential to reduce the risk of pin loosening in horses.

Laparoscopic removal of a large abdominal testicular teratoma in a standing horse.

OBJECTIVE: To describe laparoscopic removal of a large testicular teratoma in a standing horse. STUDY DESIGN: Clinical report. ANIMALS: Thoroughbred horse (11 months) with a testicular teratoma. METHODS: A unilateral cryptorchid testicle could not be removed by an inguinal approach under general anesthesia because of it s large size. After recovery from general anesthesia, ultrasound evaluation revealed a 24 x 19 cm fluid-filled testicular mass. The mass was removed by paralumbar fossa laparoscopy with the horse in a standing position. After fluid aspiration of the mass, the mesorchium and ductus deferens were ligated with extracorporeal knots and the mass retrieved inside a laparoscopic specimen pouch. Morphologic features were consistent with a teratoma. RESULTS: Laparoscopic-guided aspiration of fluid from the teratoma decreased mass size and increased ease of manipulation and retrieval. Retrieval of the teratoma in a laparoscopic specimen pouch prevented loss of abdominal insufflation, helped reduce fluid leakage, and potential seeding of neoplastic cells. CONCLUSION: Use of laparoscopy for removal of neoplastic cryptorchid testicles offers many advantages including minimal invasiveness and increased safety associated with good visibility of structures. CLINICAL RELEVANCE: Standing laparoscopic surgery should be considered for removal of testicular neoplasms in horses.

Influence of material and microtopography on the development of local infection in vivo: experimental investigation in rabbits.

Polishing the surface of internal fracture fixation (IFF) implant materials can ease implant removal and reduce irritation to gliding tissues by reducing soft tissue adhesion and bony overgrowth. Thus, polishing the surface of these implants is expected to have significant clinical benefit in certain situations. The aim of the present study was to determine if polishing the surface of an IFF device influences susceptibility to infection. The local infection rate associated with 4-hole 2.0 mm Synthes locking compression plates (LCPs) composed of clinically available commercially pure titanium (cpTi) and titanium aluminium niobium (TAN) in their standard microrough form was compared with that of their test polished equivalents and also to clinically available electropolished stainless steel (EPSS). The LCPs were fixed in locking mode onto the tibia of mature, female New Zealand White rabbits and a clinical strain of Staphylococcus aureus was added to the implantation site. Twenty eight days after surgery the rabbits were euthanized and assessed for infection. The rank order based on descending ID50 was; polished TAN, standard TAN, standard cpTi, EPSS and finally polished cpTi, however, the ID50 values did not differ greatly between the groups with the same material. Using the LCP model in locking mode, polishing the surface of both cpTi and TAN was not found to influence the susceptibility to infection in our animal model.

In vitro and in vivo evaluation of ferric-hyaluronate implants for delivery of amikacin sulfate to the tarsocrural joint of horses.

OBJECTIVE: To assess the antimicrobial elution characteristics, toxicity, and antimicrobial activity of amikacin-impregnated ferric-hyaluronate implants (AI-FeHAI) for amikacin delivery to the tarsocrural joint of horses. STUDY DESIGN: Experimental study. SAMPLE POPULATION: AI-FeHAI implants, equine cartilage, and synovium, and horses (n=6). METHODS: In vitro study: Five AI-FeHAI were placed in saline solution with daily replacement until implant degradation. Eluent was tested for amikacin concentration and bioactivity. Synovial and cartilage explants were incubated in the presence or absence of AI-FeHAI for 72 hours and subsequently assessed for morphology, viability, and composition. Synovial explants were incubated with Staphylococcus aureus in the presence or absence of AI-FeHAI. Spent medium was cultured daily and explants were assessed for morphology and viability after 96 hours. In vivo study: AI-FeHAI were placed in 6 tarsocrural joints. Standard cytologic analysis and amikacin concentration (SFAC) were determined in synovia obtained regularly for 28 days thereafter. Similar analyses were conducted after a single intra-articular injection of amikacin 6 months later. RESULTS: In vitro study: Amikacin concentrations exceeded 16 microg/mL and inhibited S. aureus growth for 8 days. AI-FeHAI had no effect on cartilage explants. AI-FeHAI eliminated bacteria from synovial explants. In vitro study: After AI-FeHAI placement, SFAC was highest (140.78+63.81 microg/mL) at first sampling time. By 24 hours SFAC was <16 microg/mL. After intra-articular injection, SFAC was the highest (377.91 +/- 40.15 microg/mL) at first sampling time. By 48 hours SFAC was <16 microg/mL. CONCLUSIONS: A single intra-articular amikacin injection demonstrated superior pharmacokinetics than AI-FeHAI prepared as described. CLINICAL RELEVANCE: AI-FeHAI cannot be recommended for clinical use.

Cardiopulmonary effects of diazepam-ketamine-isoflurane or xylazine-ketamine-isoflurane during abdominal surgery in foals.

OBJECTIVE: To evaluate cardiopulmonary effects of anesthetic induction with diazepam and ketamine or xylazine and ketamine, with subsequent maintenance of anesthesia with isoflurane, in foals undergoing abdominal surgery. ANIMALS: 17 pony foals. PROCEDURES: Foals underwent laparotomy at 7 to 15 days of age and laparoscopy 7 to 10 days later. Foals were randomly assigned to receive diazepam, ketamine, and isoflurane (D/K/Iso; n = 8) or xylazine, ketamine, and isoflurane (X/K/Iso; 9) for both procedures. RESULTS: During anesthesia for laparotomy, cardiac index, and mean arterial blood pressure ranged from 110 to 180 mL/kg/min and 57 to 81 mm Hg, respectively, in the D/K/Iso group and 98 to 171 mL/kg/min and 50 to 66 mm Hg, respectively, in the X/K/Iso group. Cardiac index, heart rate, and arterial blood pressures were significantly higher in the D/K/Iso group, compared with the X/K/Iso group. During anesthesia for laparoscopy, cardiac index and mean arterial blood pressure ranged from 85 to 165 mL/kg/min and 67 to 83 mm Hg, respectively, in the D/K/Iso group, and 98 to 171 mL/kg/min and 48 to 67 mm Hg, respectively, in the X/K/Iso group. Heart rates and arterial blood pressures were significantly higher in the D/K/Iso group, compared with the X/K/Iso group. There were no significant differences between groups during either experimental period for percentage end-tidal isoflurane, arterial blood gas partial pressures, or pH values. CONCLUSIONS AND CLINICAL RELEVANCE: Anesthesia of foals for abdominal surgery with D/K/Iso was associated with less hemodynamic depression than with X/K/Iso.

Adaptive response of equine intestinal Na+/glucose co-transporter (SGLT1) to an increase in dietary soluble carbohydrate.

Experimental and epidemiological evidence suggests that consumption of hydrolyzable carbohydrate, hCHO (grain), by horses is an important risk factor for colic, a common cause of equine mortality. It is unknown whether the small intestinal capacity to digest hCHO and/or to absorb monosaccharides is limiting, or even if horses can adapt to increased carbohydrate load. We investigated changes in the brush-border membrane carbohydrate digestive enzymes and glucose absorptive capacity of horse small intestine in response to increased hCHO. Expression of the Na(+)/glucose co-transporter, SGLT1, was assessed by Western blotting, immunohistochemistry, Northern blotting, QPCR, and Na(+)-dependent D-glucose transport. Glucose transport rates, SGLT1 protein, and mRNA expression were all 2-fold higher in the jejunum and 3- to 5-fold higher in the ileum of horses maintained on a hCHO-enriched diet compared to pasture forage. Activity of the disaccharidases was unaltered by diet. In a well-controlled study, we determined SGLT1 expression in the duodenal and ileal biopsies of horses switched, gradually over a 2-month period, from low (<1.0 g/kg bwt/day) to high hCHO (6.0 g/kg bwt/day) diets of known composition. We show that SGLT1 expression is enhanced, with time, 2-fold in the duodenum and 3.3-fold in the ileum. The study has important implications for dietary management of the horse.

Evaluation of a laparoscopic technique for collection of serial full-thickness small intestinal biopsy specimens in standing sedated horses.

OBJECTIVE: To assess a technique for laparoscopic collection of serial full-thickness small intestinal biopsy specimens in horses. ANIMALS: 13 healthy adult horses. PROCEDURES: In the ex vivo portion of the study, sections of duodenum and jejunum obtained from 6 horses immediately after euthanasia were divided into 3 segments. Each segment was randomly assigned to the control group, the double-layer hand-sewn closure group, or the endoscopic linear stapler (ELS) group. Bursting strength and bursting wall tension were measured and compared among groups; luminal diameter reduction at the biopsy site was compared between the biopsy groups. In the in vivo portion of the study, serial full-thickness small intestinal biopsy specimens were laparoscopically collected with an ELS from the descending duodenum and distal portion of the jejunum at monthly intervals in 7 sedated, standing horses. Biopsy specimens were evaluated for suitability for histologic examination. RESULTS: Mean bursting strength and bursting wall tension were significantly lower in the ELS group than in the hand-sewn and control groups in both the duodenal and jejunal segments. Use of the hand-sewn closure technique at the biopsy site reduced luminal diameter significantly more than use of the stapling technique. In the in vivo part of the study, all 52 biopsy specimens collected during 26 laparoscopic procedures were suitable for histologic examination and no clinically important perioperative complications developed. CONCLUSIONS AND CLINICAL RELEVANCE: Laparoscopic collection of serial full-thickness small intestinal biopsy specimens with a 45-mm ELS may be an effective and safe technique for use in healthy adult experimental horses.