Spike latency and response properties of an excitable micropillar laser.

We present experimental measurements concerning the response of an excitable micropillar laser with saturable absorber to incoherent as well as coherent perturbations. The excitable response is similar to the behavior of spiking neurons but with much faster time scales. It is accompanied by a subnanosecond nonlinear delay that is measured for different bias pump values. This mechanism provides a natural scheme for encoding the strength of an ultrafast stimulus in the response delay of excitable spikes (temporal coding). Moreover, we demonstrate coherent and incoherent perturbations techniques applied to the micropillar with perturbation thresholds in the range of a few femtojoules. Responses to coherent perturbations assess the cascadability of the system. We discuss the physical origin of the responses to single and double perturbations with the help of numerical simulations of the Yamada model and, in particular, unveil possibilities to control the relative refractory period that we recently evidenced in this system. Experimental measurements are compared to both numerical simulations of the Yamada model and analytic expressions obtained in the framework of singular perturbation techniques. This system is thus a good candidate to perform photonic spike processing tasks in the framework of novel neuroinspired computing systems.

Temporal summation in a neuromimetic micropillar laser.

Neuromimetic systems are systems mimicking the functionalities or architecture of biological neurons and may present an alternative path for efficient computing and information processing. We demonstrate here experimentally temporal summation in a neuromimetic micropillar laser with an integrated saturable absorber. Temporal summation is the property of neurons to integrate delayed input stimuli and to respond by an all-or-none kind of response if the inputs arrive in a sufficiently small time window. Our system alone may act as a fast optical coincidence detector and paves the way to fast photonic spike-processing networks.

2D photonic-crystal optomechanical nanoresonator.

We present the optical optimization of an optomechanical device based on a suspended InP membrane patterned with a 2D near-wavelength grating (NWG) based on a 2D photonic-crystal geometry. We first identify by numerical simulation a set of geometrical parameters providing a reflectivity higher than 99.8% over a 50-nm span. We then study the limitations induced by the finite value of the optical waist and lateral size of the NWG pattern using different numerical approaches. The NWG grating, pierced in a suspended InP 265-nm thick membrane, is used to form a compact microcavity involving the suspended nanomembrane as an end mirror. The resulting cavity has a waist size smaller than 10 µm and a finesse in the 200 range. It is used to probe the Brownian motion of the mechanical modes of the nanomembrane.

Relative refractory period in an excitable semiconductor laser.

We report on experimental evidence of neuronlike excitable behavior in a micropillar laser with saturable absorber. We show that under a single pulsed perturbation the system exhibits subnanosecond response pulses and analyze the role of the laser bias pumping. Under a double pulsed excitation we study the absolute and relative refractory periods, similarly to what can be found in neural excitability, and interpret the results in terms of a dynamical inhibition mediated by the carrier dynamics. These measurements shed light on the analogy between optical and biological neurons and pave the way to fast spike-time coding based optical systems with a speed several orders of magnitude faster than their biological or electronic counterparts.

Unequivocal differentiation of coherent and chaotic light through interferometric photon correlation measurements.

We present a novel experimental technique that can differentiate unequivocally between chaotic light and coherent light with amplitude fluctuations, and thus permits us to characterize unambiguously the output of a laser. This technique consists of measuring the second-order intensity cross correlation at the outputs of an unbalanced Michelson interferometer. It is applied to a chaotic light source and to the output of a semiconductor nanolaser whose "standard" intensity correlation function above threshold displays values compatible with a mixture of coherent and chaotic light. Our experimental results demonstrate that the output of such lasers is not partially chaotic but is indeed a coherent state with amplitude fluctuations.

Polariton condensation in solitonic gap states in a one-dimensional periodic potential.

Manipulation of nonlinear waves in artificial periodic structures leads to spectacular spatial features, such as generation of gap solitons or onset of the Mott insulator phase transition. Cavity exciton-polaritons are strongly interacting quasiparticles offering large possibilities for potential optical technologies. Here we report their condensation in a one-dimensional microcavity with a periodic modulation. The resulting mini-band structure dramatically influences the condensation process. Contrary to non-modulated cavities, where condensates expand, here, we observe spontaneous condensation in localized gap soliton states. Depending on excitation conditions, we access different dynamical regimes: we demonstrate the formation of gap solitons either moving along the ridge or bound to the potential created by the reservoir of uncondensed excitons. We also find Josephson oscillations of gap solitons triggered between the two sides of the reservoir. This system is foreseen as a building block for polaritonic circuits, where propagation and localization are optically controlled and reconfigurable.

Sub-wavelength energy concentration with electrically generated mid-infrared surface plasmons.

While freely propagating photons cannot be focused below their diffraction limit, surface-plasmon polaritons follow the metallic surface to which they are bound, and can lead to extremely sub-wavelength energy volumes. These properties are lost at long mid-infrared and THz wavelengths where metals behave as quasi-perfect conductors, but can in principle be recovered by artificially tailoring the surface-plasmon dispersion. We demonstrate - in the important mid-infrared range of the electromagnetic spectrum - the generation onto a semiconductor chip of plasmonic excitations which can travel along long distances, on bent paths, to be finally focused into a sub-wavelength volume. The demonstration of these advanced functionalities is supported by full near-field characterizations of the electromagnetic field distribution on the surface of the active plasmonic device.

Optomechanical coupling in a two-dimensional photonic crystal defect cavity.

Periodically structured materials can sustain both optical and mechanical modes. Here we investigate and observe experimentally the optomechanical properties of a conventional two-dimensional suspended photonic crystal defect cavity with a mode volume of ~3(λ/n)³. Two families of mechanical modes are observed: flexural modes, associated to the motion of the whole suspended membrane, and localized modes with frequencies in the GHz regime corresponding to localized phonons in the optical defect cavity of diffraction-limited size. We demonstrate direct measurements of the optomechanical vacuum coupling rate using a frequency calibration technique. The highest measured values exceed 80 kHz, demonstrating high coupling of optical and mechanical modes in such structures.

Demonstration of coherent emission from high-beta photonic crystal nanolasers at room temperature.

We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor (beta). Lasing is confirmed by measuring the second-order autocorrelation function. A smooth transition from chaotic to coherent emission is observed, and coherent emission is obtained at eight times the threshold power.

Thermo-optical dynamics in an optically pumped Photonic Crystal nano-cavity.

Linear and non-linear thermo-optical dynamical regimes were investigated in a photonic crystal cavity. First, we have measured the thermal relaxation time in an InP-based nano-cavity with quantum dots in the presence of optical pumping. The experimental method presented here allows one to obtain the dynamics of temperature in a nanocavity based on reflectivity measurements of a cw probe beam coupled through an adiabatically tapered fiber. Characteristic times of 1.0+/-0.2 micros and 0.9+/-0.2 micros for the heating and the cooling processes were obtained. Finally, thermal dynamics were also investigated in a thermo-optical bistable regime. Switch-on/off times of 2 micros and 4 micros respectively were measured, which could be explained in terms of a simple non-linear dynamical representation.

Transient chirp in high-speed photonic-crystal quantum-dot lasers with controlled spontaneous emission.

We report on a series of experiments on the dynamics of spontaneous emission controlled nanolasers. The laser cavity is a photonic-crystal slab cavity, embedding self-assembled quantum dots as gain material. The implementation of cavity electrodynamics effects increases the large signal modulation bandwidth significantly, with measured modulation speeds of the order of 10 GHz while keeping an extinction ratio of 19 dB. A linear transient wavelength shift is reported, corresponding to a chirp of less than 100 pm for a 35 ps laser pulse. We observe that the chirp characteristics are independent of the repetition rate of the laser up to 10 GHz.

Continuous-wave operation of photonic band-edge laser near 1.55 microm on silicon wafer.

We report on the continuous-wave operation of a band edge laser at room temperature near 1.55 mum in an InGaAs/InP photonic crystal. A flat dispersion band-edge photonic mode is used for surface normal operation. The photonic crystal slab is integrated onto a Silicon chip by means of Au/In bonding technology, which combines two advantages, efficient heat sinking and broad band reflectivity.