COVID-19 and Its Repercussions on Oral Health: A Review.

In 2019, a new type of coronavirus, SARS-CoV-2, the causing agent of COVID-19, was first detected in Wuhan, China. On 11 March 2020, the World Health Organization declared a pandemic. The manifestations of COVID-19 are mostly age-dependent and potentially more severe in cases with involved co-morbidities. The gravity of the symptoms depends on the clinical stage of the infection. The most common symptoms include runny nose and nasal congestion, anosmia, dysgeusia or hypogeusia, diarrhea, nausea/vomiting, respiratory distress, fatigue, ocular symptoms, diarrhea, vomiting, and abdominal pain. These systemic conditions are often accompanied by skin and mucosal lesions. Oral lesions reported in patients with COVID-19 include: herpex simplex, candidiasis, geographic tongue, aphthous-like ulcers, hemorrhagic ulcerations, necrotic ulcerations, white hairy tongue, reddish macules, erythematous surfaces, petechiae, and pustular enanthema. It is still unclear if these manifestations are a direct result of the viral infection, a consequence of systemic deterioration, or adverse reactions to treatments. Poor oral hygiene in hospitalized or quarantined COVID-19 patients should also be considered as an aggravating condition. This narrative review is focused on presenting the most relevant data from the literature regarding oral manifestations related to SARS-CoV-2, as well as the challenges faced by the dental system during this pandemic. A routine intraoral examination is recommended in COVID-19 patients, either suspected or confirmed, as, in certain cases, oral manifestations represent a sign of severe infection or even of a life-threatening condition. It is our belief that extensive knowledge of all possible manifestations, including oral lesions, in cases of COVID-19 is of great importance in the present uncertain context, including new, currently emerging viral variants with unknown future impact.

Internal Hexagon vs Conical Implant-Abutment Connections: Evaluation of 3-Year Postloading Outcomes.

Different types of internal implant-abutment connections, namely hexagon and conical, have been used for implant restoration. However, data regarding the benefits of these internal connections in terms of clinical outcomes are scarce. Accordingly, the aim of this study was to compare radiographic marginal bone loss (RMBL) and associated implant complications between implants with internal hexagon (IH) connections and those with internal conical (IC) connections. Forty-nine patients with 98 implants (2 per patient) placed in the posterior mandible were recruited. All implants were inserted in pairs into solid D2 bone according to a randomized sequence; the first patient received an IH connection implant on the mesial side, while the second patient received an IC connection implant on the mesial side. Each patient received 1 implant with an IH connection and 1 with an IC connection, placed side by side. Four months after placement, all implants were loaded with single screw-retained ceramic restorations with IH or IC connections. RMBL and complications, including implant/prosthesis failure, were recorded at the time of implant loading (baseline) and at 6, 12, and 36 months after loading. The results revealed no significant between-group differences in RMBL (P = .74), gingival bleeding on probing (P = .29), and complications (P = .32). Thus, the type of internal implant-abutment connection did not affect clinical outcomes, including RMBL and implant/prosthesis failure. Future studies should additionally evaluate long-term prosthesis-related complications, such as screw loosening and fracture, between the 2 types of internal connections.

Advanced Biomaterials and Techniques for Oral Tissue Engineering and Regeneration-A Review.

The reconstruction or repair of oral and maxillofacial functionalities and aesthetics is a priority for patients affected by tooth loss, congenital defects, trauma deformities, or various dental diseases. Therefore, in dental medicine, tissue reconstruction represents a major interest in oral and maxillofacial surgery, periodontics, orthodontics, endodontics, and even daily clinical practice. The current clinical approaches involve a vast array of techniques ranging from the traditional use of tissue grafts to the most innovative regenerative procedures, such as tissue engineering. In recent decades, a wide range of both artificial and natural biomaterials and scaffolds, genes, stem cells isolated from the mouth area (dental follicle, deciduous teeth, periodontal ligament, dental pulp, salivary glands, and adipose tissue), and various growth factors have been tested in tissue engineering approaches in dentistry, with many being proven successful. However, to fully eliminate the problems of traditional bone and tissue reconstruction in dentistry, continuous research is needed. Based on a recent literature review, this paper creates a picture of current innovative strategies applying dental stem cells for tissue regeneration in different dental fields and maxillofacial surgery, and offers detailed information regarding the available scientific data and practical applications.

Effects of a Short Drilling Implant Protocol on Osteotomy Site Temperature and Drill Torque.

PURPOSE: To establish a protocol for reducing the drilling sequence during implant site preparation based on temperature and insertion torque. The traditional conventional drilling sequence (used several drills with 0.6-mm increment each time) was compared with the proposed short drilling protocol (only used 2 drills: initial and final drill). MATERIALS AND METHODS: One hundred drilling osteotomies were performed in bovine and porcine bones. Sets of 2 osteotomy sites were created in 5 bone densities using 2 types of drilling protocols. Thermographic pictures were captured throughout all drilling procedures and analyzed using ThermaCAM Researcher Professional 2.10. Torque values were determined during drilling by measuring electrical input and drill speed. RESULTS: There were statistically significant differences in bone temperature between the conventional and short drilling protocols during implant site preparation (analysis of variance P = 0.0008). However, there were no significant differences between the 2 types of drilling protocols for both implant diameters. Implant site preparation time was significantly reduced when using the short drilling protocol compared with the conventional drilling protocol (P < 0.001). CONCLUSIONS: Within the limitations of the study, the short drilling protocol proposed herein may represent a safe approach for implant site preparation.

Utilization of Ceramic Inlays for Sealing Implant Prostheses Screw Access Holes: A Case-Control Study.

PURPOSE: The aim of this study was to evaluate, in a case control study, the esthetic and functional clinical performance of ceramic inlays used for covering the screw access hole in single monolithic lithium disilicate full-contour crowns bonded on computer-aided design/computer-aided manufacturing (CAD/CAM) prefabricated titanium abutments in order to eliminate the drawbacks of alternative restorative methods. MATERIALS AND METHODS: Twenty-eight patients with missing teeth in the lateral areas (premolars and molars) received screw-retained implant restorations. In half of the restorations (n = 14), composite fillings were used to seal the access hole (control group), while the other half was sealed with ceramic inlays (test group). To determine the restoration occlusal wear, impressions were obtained after the restorations were finalized, at 1 year, and at 2 years follow-up. The casts were scanned with a 3D Scanner Design System recording the anatomical surfaces of the white model replicates. Wear amounts (µm) were calculated as the maximum loss in height of the occlusal surface. The clinical evaluation was carried out using a kit specifically designed for assessing the FDI criteria. Statistics were performed using analysis of variance (ANOVA). RESULTS: A total of 58 restorations were delivered, and after 2 years of follow-up, the wear values were 228.20 ± 54.68 µm for the control group and 65.20 ± 7.24 µm for the ceramic inlay group. One-way ANOVA showed significant differences among the vertical loss between these two groups (P < .001). Clinical outcomes according to the FDI score for assessing dental restorations revealed substantial deterioration within 2 years of follow-up. CONCLUSION: The use of ceramic inlays appears to be a predictable, esthetic, and successful method of sealing the screw holes of the screw-retained implant restorations.

The assessment of lower face morphology changes in edentulous patients after prosthodontic rehabilitation, using two methods of measurement.

Using two measurement methods (a three-dimensional laser scanning system and a digital caliper), this study compares the lower face morphology of complete edentulous patients, before and after prosthodontic rehabilitation with bimaxillary complete dentures. Fourteen edentulous patients were randomly selected from the Department of Prosthodontics, at the Faculty of Dental Medicine, "Victor Babes" University of Medicine and Pharmacy, Timisoara, Romania. The changes that occurred in the lower third of the face after prosthodontic treatment were assessed quantitatively by measuring the vertical projection of the distances between two sets of anthropometric landmarks: Subnasale - cutaneous Pogonion (D1) and Labiale superius - Labiale inferius (D2). A two-way repeated measures ANOVA model design was carried out to test for significant interactions, main effects and differences between the two types of measuring devices and between the initial and final rehabilitation time points. The main effect of the type of measuring device showed no statistically significant differences in the measured distances (p=0.24 for D1 and p=0.39 for D2), between the initial and the final rehabilitation time points. Regarding the main effect of time, there were statistically significant differences in both the measured distances D1 and D2 (p=0.001), between the initial and the final rehabilitation time points. The two methods of measurement were equally reliable in the assessment of lower face morphology changes in edentulous patients after prosthodontic rehabilitation with bimaxillary complete dentures. The differences between the measurements taken before and after prosthodontic rehabilitation proved to be statistically significant.

Effects of a hydrogel patch on denture-related traumatic ulcers; an exploratory study.

PURPOSE: The aim of this exploratory study was to evaluate the effects of hydrogel patch wound dressing on healing time and pain level of denture-related lesions of the oral mucosa in edentulous individuals. MATERIALS AND METHODS: Twenty-three adults with newly fabricated complete sets of dentures who subsequently developed at least two ulcerative lesions related to their complete dentures were included in the study. For each participant, the smaller lesion (control lesion) was allocated to usual care, that is, adjustment of the denture's margins, whereas the larger lesion (test lesion) was assigned to receive usual care plus application of a hydrogel patch. In the latter, a patch was applied directly on the affected area three times within the first 24 hours, followed by application of three additional patches, namely one during each of the following 3 days. Participants were monitored until complete healing of all ulcers. The primary outcome measures were changes since baseline in each lesion's greatest dimension at days 1 and 7, as well as improvement in ulcer-related pain experienced. RESULTS: Participants were on average about 70 years old, about half were women, and just over 40% had type 2 diabetes. Lesions treated with the hydrogel patch extended between 4.3 and 10.2 mm (mean 7.1 mm) in their greatest dimension, and the smaller lesions receiving usual care were initially 4 mm on average, ranging from 2.0 to 7.0 mm. The hydrogel patch lesions attained 25% to 75% reductions in their greatest lesion extent from baseline to days 1 and 7, respectively, compared to 10% and just over 50% reduction in the lesions that received usual care. Healing rates were similar in patients with and without diabetes. The participants reported significant improvement in pain level 1 day following treatment initiation for 30% of the control lesions, compared to 65% of the lesions treated with the hydrogel patch. CONCLUSIONS: The results of this exploratory study suggest that application of hydrogel patches may represent a novel, effective treatment for accelerating the healing process and pain reduction in mucosal lesions associated with complete dentures also in people with type 2 diabetes; however, larger studies need to confirm these findings.

Crestal bone remodeling around implants placed using a short drilling protocol.

PURPOSE: The aim of the study was to examine the influence of a short drilling protocol on peri-implant crestal bone levels. MATERIALS AND METHODS: Forty implants were placed in the posterior mandibles of 20 patients. The implants (diameter, 4.2 mm; length, 10 to 11.5 mm) were inserted in pairs: one implant was inserted using the standard drilling protocol (five drills in sequence), while the other was inserted using the short drilling protocol sequence (three drills). All implants received healing abutments and were restored with single-unit restorations after 3 months of healing. Analysis of crestal bone level was based on radiographs taken at insertion and at 3, 6, and 12 months after insertion. The results were analyzed using software Image J 1.46r (National Institutes of Health). Crestal bone level was measured in millimeters at the distal aspect of each implant. RESULTS: None of the implants in either group was lost during the 12-month follow-up period, and all patients completed the follow-up examination. The drilling time for the insertion of one implant with the short drilling protocol was 1.03 ± 3.63 minutes compared to 1.57 ± 2.88 minutes for the standard protocol. The mean values of crestal bone loss at 12 months were 0.94 ± 0.43 mm for implants placed using the standard protocol and 0.90 ± 0.33 mm for implants placed using the short drilling protocol. No statistically significant differences were noted. CONCLUSION: Using the short drilling protocol reduced the surgery time by approximately 50% and did not affect crestal bone remodeling during the first year postinsertion.

Implant survival rate and marginal bone loss of 6-mm short implants: a 2-year clinical report.

PURPOSE: This study aimed to evaluate (1) the association between implant diameter and marginal bone loss (MBL) of short (6 mm) implants and (2) the survival rates of short implants. MATERIALS AND METHODS: Thirty-three 6-mm implants were placed in the mandibles of 16 qualified patients. The selected sites had > 5 mm ridge width and < 9 mm bone height. None of the implant sites required bone augmentation procedures. All implants were uncovered 3 months after placement, and all patients were rehabilitated with 2- or 3-unit implant-supported fixed partial dentures. Standardized periapical films were taken after 24 months of function. Radiographs were digitalized, and MBL was assessed. RESULTS: For all implants, the mean MBL was 0.17 mm at the point of uncovering. At the 2-year follow-up, all implants were immobile and functional. Implants with 4.2-mm diameters had significantly more MBL (1.95 mm) than wider implants (0.47 mm and 0.35 mm for 5.0-mm and 6.0-mm implants, respectively). CONCLUSION: This 2-year study illustrated that short implants are a viable option in selected clinical scenarios. Short implants with wider diameters are preferred because they have less marginal implant bone loss.

Craniofacial morphology in patients with Angle Class II division 2 malocclusion.

Cephalometric analysis is frequently used in orthodontics for diagnostic purposes, in order to evaluate the positional relationship of the upper and lower jaw to the cranial base, as well as to objectively asses the way dental arches relate to one another and to the skeletal base. As with other dento-skeletal anomalies, the normal growth process can induce changes in these parameters. The purpose of this study is to evaluate the skeletal and dental changes that occur in growing patients with Angle Class II division 2 malocclusion. The study also focuses on analyzing and comparing several parameters in three groups of young patients of different ages, diagnosed with Class II division 2 malocclusion, in order to determine whether the anomaly worsens or improves during the patients' growth period. A total of 25 lateral skull teleradiographs were analyzed using cephX. The patients were divided into three groups (Group 1: 6-8 years, Group 2: 9-14 years, Group 3: 15-18 years). We used the cephalometric parameters described in Björk-Jarabak and Tweed analyses, as well as the relationship of the upper and lower central incisors to the skeletal landmarks. The statistical methods used in this study were the analysis of variance (ANOVA) and the unpaired Student's t-test (p<0.05). We concluded that, during the physiological growth process, the Angle Class II division 2 malocclusion has the following cephalometric characteristics: the maxillary central incisors were in accentuated retroclination, the interincisal angle was very obtuse, the gonial angle showed lower than normal values towards the end of the growth period, the lower anterior face height was definitely decreased, the mandibular body length was shorter than normal in the early growth period and the tendency towards a hypodivergent skeletal pattern remained stable during growth.

A rough surface implant neck with microthreads reduces the amount of marginal bone loss: a prospective clinical study.

OBJECTIVES: An intra-individual controlled clinical trial was conducted to evaluate and compare the amount of marginal bone loss (MBL) found around implants of a comparable design, with or without retention grooves (microthreads) or polished necks, during the early stages of healing. MATERIALS AND METHODS: Forty-eight (48) patients with missing mandibular posterior teeth were treated with two commercially available implants of the same brand (MIS): one with microthreads (S-model) and the other with a polished neck (L-model). MBL around each implant was measured on follow-up radiograms taken 4 months after placement (exposure and crown cementation), and 6 and 12 months after loading. RESULTS: Forty-six (46) patients completed the study, making 46 implant pairs available for statistical analysis. None of the implants failed to integrate. All the implants displayed some extent of bone loss throughout the follow-up period. At each time point (exposure, 6 and 12 months after loading), the S-model implants displayed statistically significant lower amounts of bone loss (0.22 vs. 0.76, 0.57 vs. 1.22 and 0.9 vs. 1.5 mm, respectively). Other than the type of the implant, no correlation was found between MBL and the implant stability values (PerioTest), dimensions, site of insertion or any of the other collected variables. CONCLUSIONS: Implants with a roughened neck surface and microthreads are more resistant to MBL during the first phases of healing, as compared with implants with a polished neck.

The influence of remaining alveolar bone upon lateral window sinus augmentation implant survival.

UNLABELLED: BACKGROUND OF PROBLEMS:: Sinus augmentation is a predictable procedure to increase bone height in the posterior maxilla to facilitate ideal implant placement. However, the effect of residual alveolar bone height upon overall implant success remains unclear. AIMS: : Hence, the objective of this study was to review and evaluate the correlation between amount of remaining crest alveolar bone before sinus augmentation and implant survival rate in grafted areas. MATERIALS: : Medline search was used to identify articles published through September 2006, with preset selection criteria. RESULTS: : A total of 156 peer-reviewed publications were selected. Eighteen publications fulfilled the selection criteria. Despite the great heterogeneity found among the selected studies, we were able to group the selected articles in 2 distinct groups and show average implant survival rate in the following residual bone categories: (1) <5 mm: 96% (80%-100%); and (2) >4 mm 99% (97%-100%). CONCLUSION: : The data reviewed from the literature suggests a higher implant survival predictability as available residual bone increases. However, prospective studies with adequate sample size and control of confounding factors are needed to validate this observation.

Piezosurgery: basics and possibilities.

Useful in a variety of oral surgery procedures, piezosurgery has therapeutic features that include a micrometric cut (precise and secure action to limit tissue damage, especially to osteocytes), a selective cut (affecting mineralized tissues, but not surrounding soft tissues), and a clear surgical site (the result of the cavitation effect created by an irrigation/cooling solution and oscillating tip). Because the instrument's tip vibrates at different ultrasonic frequencies, since hard and soft tissues are cut at different frequencies, a "selective cut" enables the clinician to cut hard tissues while sparing fine anatomical structures (e.g., schneiderian membrane, nerve tissue). An oscillating tip drives the cooling-irrigation fluid, making it possible to obtain effective cooling as well as higher visibility (via cavitation effect) compared to conventional surgical instruments (rotating burs and oscillating saws), even in deep spaces. As a result, implantology surgical techniques such as bone harvesting (chips and blocks), crestal bone splitting, and sinus floor elevation can be performed with greater ease and safety.