In Situ Spectroscopic and Electrical Investigations of Ladder-type Conjugated Polymers Doped with Alkali Metals.

Ladder-type conjugated polymers exhibit a remarkable performance in (opto)electronic devices. Their double-stranded planar structure promotes an extended π-conjugation compared to inter-ring-twisted analogues, providing an excellent basis for exploring the effects of charge localization on polaron formation. Here, we investigated alkali-metal n-doping of the ladder-type conjugated polymer (polybenzimidazobenzophenanthroline) (BBL) through detailed in situ spectroscopic and electrical characterizations. Photoelectron spectroscopy and ultraviolet-visible-near-infrared (UV-vis-NIR) spectroscopy indicate polaron formation upon potassium (K) doping, which agrees well with theoretical predictions. The semiladder BBB displays a similar evolution in the valence band with the appearance of two new features below the Fermi level upon K-doping. Compared to BBL, distinct differences appear in the UV-vis-NIR spectra due to more localized polaronic states in BBB. The high conductivity (2 S cm-1) and low activation energy (44 meV) measured for K-doped BBL suggest disorder-free polaron transport. An even higher conductivity (37 S cm-1) is obtained by changing the dopant from K to lithium (Li). We attribute the enhanced conductivity to a decreased perturbation of the polymer nanostructure induced by the smaller Li ions. These results highlight the importance of polymer chain planarity and dopant size for the polaronic state in conjugated polymers.

Understanding Interface Dipoles at an Electron Transport Material/Electrode Modifier for Organic Electronics.

Interface dipoles formed at an electrolyte/electrode interface have been widely studied and interpreted using the "double dipole step" model, where the dipole vector is determined by the size and/or range of motion of the charged ions. Some electron transport materials (ETMs) with lone pairs of electrons on heteroatoms exhibit a similar interfacial behavior. However, the origin of the dipoles in such materials has not yet been explored in great depth. Herein, we systematically investigate the influence of the lone pair of electrons on the interface dipole through three pyridine derivatives B2-B4PyMPM. Experiments show that different positions of nitrogen atoms in the three materials give rise to different hydrogen bonds and molecular orientations, thereby affecting the areal density and direction of the lone pair of electrons. The interface dipoles of the three materials predicted by the "double dipole step" model are in good agreement with the ultraviolet photoelectron spectroscopy results both in spin-coated and vacuum-deposited films. These findings help to better understand the ETMs/electrode interfacial behaviors and provide new guidelines for the molecular design of the interlayer.

Dimensional Tailoring of Ultrahigh Vacuum Annealing-Assisted Quantum Wells for the Efficiency Enhancement of Perovskite Light-Emitting Diodes.

Quasi-two-dimensional (Q-2D) perovskites featured with multidimensional quantum wells (QWs) have been the main candidates for optoelectronic applications. However, excessive low-dimensional perovskites are unfavorable to the device efficiency due to the phonon-exciton interaction and the inclusion of insulating large organic cations. Herein, the formation of low-dimensional QWs is suppressed by removing the organic cation 1-naphthylmethylamine iodide (NMAI) through ultrahigh vacuum (UHV) annealing. Perovskite light-emitting diode (PLED) devices based on films annealed with optimized UHV conditions show a higher external quantum efficiency (EQE) of 13.0% and wall-plug efficiency of 11.1% compared to otherwise identical devices with films annealed in a glovebox.

Extremely Low-Cost and Green Cellulose Passivating Perovskites for Stable and High-Performance Solar Cells.

The fast evolution of metal halide perovskite solar cells has opened a new chapter in the field of renewable energy. High-quality perovskite films as the active layers are essential for both high efficiency and long-term stability. Here, the perovskite films with enlarged crystal grain size and decreased defect density are fabricated by introducing the extremely low-cost and green polymer, ethyl cellulose (EC), into the perovskite layer. The addition of EC triggers hydrogen bonding interactions between EC and the perovskite, passivating the charge defect traps at the grain boundaries. The long chain of EC further acts as a scaffold for the perovskite structure, eliminating the annealing-induced lattice strain during the film fabrication process. The resulting devices with the EC additive exhibit a remarkably enhanced average power conversion efficiency from 17.11 to 19.27% and an improvement of all device parameters. The hysteresis index is found to decrease by three times from 0.081 to 0.027, which is attributed to suppressed ion migration and surface charge trapping. In addition, the defect passivation by EC significantly improves the environmental stability of the perovskite films, yielding devices that retain 80% of their initial efficiency after 30 days in ambient air at 45% relative humidity, whereas the pristine devices without EC fully degrade. This work provides a low-cost and green avenue for passivating defects that improves both the efficiency and operational stability of perovskite solar cells.

Oxygen- and Water-Induced Energetics Degradation in Organometal Halide Perovskites.

Organometal halide perovskites are under rapid development, and significant focus has been placed on their stability that currently presents a major obstacle for practical application. Energetics plays a vital role in charge injection/extraction and transport properties in devices. Here, we in situ investigate oxygen- and water-induced energetics degradation in organometal halide perovskite films. Oxygen gas induces an upward shift of the vacuum level of the perovskite films because of the formation of an oxygen-induced surface dipole, water vapor causes a significant vacuum-level downshift, and the valence band binding energy referenced to the Fermi level simultaneously increases so as to keep the ionization potential of the perovskite films unchanged. Moreover, the chemical compositions, crystalline structures, surface morphologies, and dynamical properties also are monitored and analyzed in detail. These results are indispensable to understand the degradation mechanisms and to perform the optimizations of stable materials and devices in the future.

The Effect of Oxygen Uptake on Charge Injection Barriers in Conjugated Polymer Films.

The energy offset between the electrode Fermi level and organic semiconductor transport levels is a key parameter controlling the charge injection barrier and hence efficiency of organic electronic devices. Here, we systematically explore the effect of in situ oxygen exposure on energetics in n-type conjugated polymer P(NDI2OD-T2) films. The analysis reveals that an interfacial potential step is introduced for a series of P(NDI2OD-T2) electrode contacts, causing a nearly constant downshift of the vacuum level, while the ionization energies versus vacuum level remain constant. These findings are attributed to the establishment of a so-called double-dipole step via motion of charged molecules and will modify the charge injection barriers at electrode contact. We further demonstrate that the same behavior occurs when oxygen interacts with p-type polymer TQ1 films, indicating it is possible to be a universal effect for organic semiconductors.

Energy Level Alignment of N-Doping Fullerenes and Fullerene Derivatives Using Air-Stable Dopant.

Doping has been proved to be one of the powerful technologies to achieve significant improvement in the performance of organic electronic devices. Herein, we systematically map out the interface properties of solution-processed air-stable n-type (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl) doping fullerenes and fullerene derivatives and establish a universal energy level alignment scheme for this class of n-doped system. At low doping levels at which the charge-transfer doping induces mainly bound charges, the energy level alignment of the n-doping organic semiconductor can be described by combining integer charger transfer-induced shifts with a so-called double-dipole step. At high doping levels, significant densities of free charges are generated and the charge flows between the organic film and the conducting electrodes equilibrating the Fermi level in a classic "depletion layer" scheme. Moreover, we demonstrate that the model holds for both n- and p-doping of π-backbone molecules and polymers. With the results, we provide wide guidance for identifying the application of the current organic n-type doping technology in organic electronics.

Energy Level Alignment at Metal/Solution-Processed Organic Semiconductor Interfaces.

Energy barriers between the metal Fermi energy and the molecular levels of organic semiconductor devoted to charge transport play a fundamental role in the performance of organic electronic devices. Typically, techniques such as electron photoemission spectroscopy, Kelvin probe measurements, and in-device hot-electron spectroscopy have been applied to study these interfacial energy barriers. However, so far there has not been any direct method available for the determination of energy barriers at metal interfaces with n-type polymeric semiconductors. This study measures and compares metal/solution-processed electron-transporting polymer interface energy barriers by in-device hot-electron spectroscopy and ultraviolet photoemission spectroscopy. It not only demonstrates in-device hot-electron spectroscopy as a direct and reliable technique for these studies but also brings it closer to technological applications by working ex situ under ambient conditions. Moreover, this study determines that the contamination layer coming from air exposure does not play any significant role on the energy barrier alignment for charge transport. The theoretical model developed for this work confirms all the experimental observations.

Poly(ethylene imine) impurities induce n-doping reaction in organic (semi)conductors.

Volatile impurities contained in polyethyleneimine (PEI), and identified as ethyleneimine dimers and trimers, are reported. These N-based molecules show a strong reducing character, as demonstrated by the change in electrical conductivity of organic (semi)conductors exposed to the PEI vapor. The results prove that electron transfer rather than a dipole effect at the electrode interface is the origin of the work-function modification by the PEI-based layers.

Semi-metallic polymers.

Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly(3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.

Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene).

Thermoelectric generators (TEGs) transform a heat flow into electricity. Thermoelectric materials are being investigated for electricity production from waste heat (co-generation) and natural heat sources. For temperatures below 200 °C, the best commercially available inorganic semiconductors are bismuth telluride (Bi(2)Te(3))-based alloys, which possess a figure of merit ZT close to one. Most of the recently discovered thermoelectric materials with ZT>2 exhibit one common property, namely their low lattice thermal conductivities. Nevertheless, a high ZT value is not enough to create a viable technology platform for energy harvesting. To generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs. This requires thermoelectric materials that are readily synthesized, air stable, environmentally friendly and solution processable to create patterns on large areas. Here we show that conducting polymers might be capable of meeting these demands. The accurate control of the oxidation level in poly(3,4-ethylenedioxythiophene) (PEDOT) combined with its low intrinsic thermal conductivity (λ=0.37 W m(-1) K(-1)) yields a ZT=0.25 at room temperature that approaches the values required for efficient devices.

Local surface potential of π-conjugated nanostructures by Kelvin probe force microscopy: effect of the sampling depth.

Kelvin probe force microscopy (KPFM) is usually applied to map the local surface potential of nanostructured materials at surfaces and interfaces. KPFM is commonly defined as a 'surface technique', even if this assumption is not fully justified. However, a quantification of the surface sensitivity of this technique is crucial to explore electrical properties at the nanoscale. Here a versatile 3D model is presented which provides a quantitative explanation of KPFM results, taking into account the vertical structure of the sample. The model is tested on nanostructured films obtained from two relevant semiconducting systems for field-effect transistor and solar cell applications showing different interfacial properties, i.e., poly(3-hexylthiophene) (P3HT) and perylene-bis-dicarboximide (PDI). These findings are especially important since they enable quantitative determination of the local surface potential of conjugated nanostructures, and thereby pave the way towards optimization of the electronic properties of nanoscale architectures for organic electronic applications.

Solution-processed, highly-oriented supramolecular architectures of functionalized porphyrins with extended electronic states.

Thin films of aligned supramolecular architectures built from newly synthesized thiophene-substituted porphyrins have been processed from solution on surfaces.