Aquatic Fate and Ecotoxicology Effect of ZnS:Mn Quantum Dots on Chlorella vulgaris in Fresh Water.

With the increasing integration of nanomaterials into daily life, the potential ecotoxicological impacts of nanoparticles (NPs) have attracted increased attention from the scientific community. This study assessed the ecotoxicity of ZnS quantum dots (QDs) doped with varying molar concentrations of Mn2+ on Chlorella vulgaris. The ZnS:Mn QDs were synthesized using the polyol method. The size of the ZnS:Mn QDs ranged from approximately 1.1 nm to 2 nm, while the aggregation size in Seine River water was 341 nm at pH 6 and 8. The presence of ZnS:Mn (10%) NPs exhibited profound toxicity to Chlorella vulgaris, with immediate reductions in viability (survival cells) from 71%, 60% to 51%, 52% in BG11 and Seine River water, respectively, at a concentration of 100 mg L-1 of ZnS:Mn (10%) NPs. Additionally, the ATP content in Chlorella vulgaris significantly decreased in Seine River water (by 20%) after 3 h of exposure to ZnS:Mn (10%) NPs. Concurrently, SOD activity significantly increased in Seine River water, indicating that the ZnS:Mn (10%) NPs induced ROS production and triggered an oxidative stress response in microalgae cells.

Preparation, Characterization and In Vivo Biocompatibility Studies of Cotton Cellulose Nanofibers.

Cellulose nanofibers have mechanical properties that make them very attractive in a myriad of fields such as biomedicine, tissue engineering, biosensors, cosmetics and food packet products. To evaluate the potential health risks of airborne cellulose nanofibers, the cellulose nanofiber was prepared and characterized and then its pulmonary potential toxicity to a mouse model was studied. Cellulose nanofiber has been prepared by acid hydrolysis of cotton cellulose and characterized by transmission electron microscopy, zeta potential and X-ray diffraction analysis. Then, using a short-term inhalation test, the pulmonary biocompatibility of cotton cellulose nanofibers at different concentrations (0.5 mg/mL, 1 mg/mL and 2 mg/mL) were evaluated. Transmission electron images showed needle-shaped particle with a diameter of about 6-18 nm and a length of 85-225 µm. Zeta potential was -25.3±7.80 mV and the X-ray diffraction patterns indicate that cotton cellulose nanofiber has pure structural characteristics. The In Vivo results revealed that the exposure to cotton cellulose nanofiber did not alter the number of inflammatory cells or cytokine secretion by lung cells (p > 0.05). The results demonstrate that the cotton cellulose nanofiber is biocompatible and it is an environment-friendly nanomaterial with promise in various industrial sectors.

Monitoring photosynthetic microorganism activity with an electrolyte-gated organic field effect transistor.

Among organic thin film transistors (OTFTs), Organic Electrochemical Transistors (OECTs) have been extensively used for cell monitoring while Electrolyte-Gated Organic Field-Effect Transistors (EGOFETs) have never been described for that kind of application. However, EGOFETs are well adapted for this use because, as well as OECTs, they can operate directly in aqueous solutions such as cells culture media, but they offer much a higher on/off ratio which could lead to better sensitivity. As a proof of concept, we propose herein to monitor the photosynthetic activity of a cyanobacterium (Anabaena flos-aquae) contained within an EGOFET's electrolyte.

Ecotoxicological Studies of ZnO and CdS Nanoparticles on Chlorella vulgaris Photosynthetic Microorganism in Seine River Water.

: Seine river water was used as natural environmental medium to study the ecotoxicological impact of ZnO and CdS nanoparticles and Zn2+ and Cd2+ free ions using Chlorella vulgaris as a biological target. It was demonstrated by viability tests and photosynthetic activity measurements that free Zn2+ (IC50 = 2.7 × 10-4 M) is less toxic than free Cd2+ and ZnO nanoparticles (IC50 = 1.4 × 10-4 M). In the case of cadmium species, free Cd2+ (IC50 = 3.5 × 10-5 M) was similar to CdS nanoparticles (CdS-1: IC50 = 1.9 × 10-5 M and CdS-2: IC50 = 1.9 × 10-5 M), as follows: CdS > Cd2+ > ZnO > Zn2+. Adenosine-5'-triphosphate (ATP) assay and superoxide dismutase (SOD) enzymatic activity confirmed these results. Transmission electron microscopy (TEM), coupled with energy-dispersive X-ray spectroscopy (EDS), confirmed the internalization of CdS-1 nanoparticles after 48 h of contact with Chlorella vulgaris at 10-3 M. With a higher concentration of nanoparticles (10-2 M), ZnO and CdS-2 were also localized inside cells.

Magnetic-field induced rotation of magnetosome chains in silicified magnetotactic bacteria.

Understanding the biological processes enabling magnetotactic bacteria to maintain oriented chains of magnetic iron-bearing nanoparticles called magnetosomes is a major challenge. The study aimed to constrain the role of an external applied magnetic field on the alignment of magnetosome chains in Magnetospirillum magneticum AMB-1 magnetotactic bacteria immobilized within a hydrated silica matrix. A deviation of the chain orientation was evidenced, without significant impact on cell viability, which was preserved after the field was turned-off. Transmission electron microscopy showed that the crystallographic orientation of the nanoparticles within the chains were preserved. Off-axis electron holography evidenced that the change in magnetosome orientation was accompanied by a shift from parallel to anti-parallel interactions between individual nanocrystals. The field-induced destructuration of the chain occurs according to two possible mechanisms: (i) each magnetosome responds individually and reorients in the magnetic field direction and/or (ii) short magnetosome chains deviate in the magnetic field direction. This work enlightens the strong dynamic character of the magnetosome assembly and widens the potentialities of magnetotactic bacteria in bionanotechnology.

Optical microalgal biosensors for aqueous contaminants using organically doped silica as cellular hosts.

Optical biosensors for the detection of toxic species in aqueous media were developed via the encapsulation of microalgae in sol-gel matrices. In a first step, the effect of cadmium(II), lead(II), and anthracene on the chlorophyll a fluorescence intensity of Anabaena flos-aquae, Chlorella vulgaris, and Euglena gracilis microalgae in suspension was studied. Complementary ATP-metry measurements demonstrated a direct relationship between optical response and pollutant toxicity, in a cell- and dose-dependent manner. In a second step, microalgae were successfully encapsulated in silicate-colloidal silica nanocomposite matrices. However, a complete loss of cell response to pollutant addition was observed, despite the preservation of cell viability. Introduction of a low amount (5 mol%) of amine- or ethyl-bearing silanes in the matrix formulation allowed the recovery of the sensing capacity of the immobilized microalgae, without impacting on the response time (30 s). Porosimetry and 29Si solid-state NMR spectroscopy showed that the organic moieties are fully integrated into the inorganic network, tuning the ability of the target pollutant to diffuse and reach the encapsulated algae. This versatile strategy could be useful for the easy and fast assessment of contamination levels in polluted waters. Graphical Abstract Microalgal biosensors for aqueous contaminants using organically doped silica as cellular hosts.

Effect of Multi-walled Carbon Nanotubes on Metabolism and Morphology of Filamentous Green Microalgae.

Multi-walled carbon nanotubes (MWCNTs) have potential applications in the industrial, agricultural, pharmaceutical, medical, and environmental remediation fields. However, many uncertainties exist regarding the environmental implications of engineered nanomaterials. This study examined the effect of the MWCNTs on metabolic status and morphology of filamentous green microalgae Klebsormidium flaccidum. Appropriate concentrations of MWCNT (1, 50, and 100 µg mL-1) were added to a microalgal culture in the exponential growth phase and incubated for 24, 48, 72, and 96 h. Exposure to MWCNT led to reductions in algal growth after 48 h and decreased on cell viability for all experimental endpoints except for 1 µg mL-1 at 24 h and 100 µg mL-1 after 72 h. At 100 µg mL-1, MWCNTs induced reactive oxygen species (ROS) production and had an effect on intracellular adenosine triphosphate (ATP) content depending on concentration and time. No photosynthetic activity variation was observed. Observations by scanning transmission electron microscopy showed cell damage. In conclusion, we have demonstrated that exposure to MWCNTs affects cell metabolism and microalgal cell morphology. To our best knowledge, this is the first case in which MWCNTs exhibit adverse effects on filamentous green microalgae K. flaccidum. These results contribute to elucidate the mechanism of MWCNT nanotoxicity in the bioindicator organism of terrestrial and freshwater habitats.

Cd2+ and Pb2+ complexation by glutathione and the phytochelatins.

Phytochelatins or PCn, (γGlu-Cys)n-Gly, and their glutathione (GSH) precursor are thiol-rich peptides that play an important role in heavy metal detoxification in plants and microorganisms. Complex formation between Cd2+ and Pb2+ and GSH or PCn (n = 2, 4 and 6) are investigated by microcalorimetry, absorption spectrophotometry and T-jump kinetics. Complex formation with Pb2+ or Cd2+ is exothermic, and induces ligand metal charge transfer bands in UV absorption spectral range, which implies the formation of a coordination bond between the metal and the thiol groups of the phytochelatins. Absorption spectra and microcalorimetry experiments allow the determination of the affinity constants and the stoichiometry of the complexes. We show that the three PCn interact with Pb2+ to form the 1:1 and 2:1 M:L complexes, with similar affinity constants (log K11Pb∼4.6, log K21Pb∼11.4). These affinities are independent of the number of thiols and are, moreover, lower than those determined for complex formation with Cd2+. On the other hand, with Cd2+, PC2-Cd, PC2-Cd2, (PC2)3-Cd2, PC4-Cd, PC4-Cd2, PC6-Cd, (PC6)2-Cd3 and PC6-Cd3 complexes are detected. Furthermore, for PC4-Cd, the 1:1 complex is the most stable: affinity constant (log K11Cd∼7.5). Kinetic studies indicate that complex formation between Cd2+ and GSH occurs in the ms range; direct rate constant kobs = (6.8 ± 0.3) 106 M-1 s-1 and reverse rate constant k-obs = 340 ± 210 s-1. Thus, when encapsulated in a silica matrix, PCn can be good candidates for heavy metal detection.

The physics and chemistry of silica-in-silicates nanocomposite hydrogels and their phycocompatibility.

Silicates-in-silica nanocomposite hydrogels obtained from sodium silicates/colloidal silica mixtures have previously been found to be useful for bacterial encapsulation. However the extension of synthesis conditions and the understanding of their impact on the silica matrix would widen the applicability of this process in terms of encapsulated organisms and the host properties. Here the influence of silicates and the colloidal silica concentration as well as pH conditions on the gel time, the optical properties, the structural and mechanical properties of silica matrices was studied. We show that gel formation is driven by silicate condensation but that the aggregation of silica colloids also has a major influence on the transparency and structure of the nanocomposites. Three different photosynthetic organisms, cyanobacteria Anabaena flos-aquae and two microalgae Chorella vulgaris and Euglena gracilis, were used as probes of the phycocompatibility of the process. The three organisms were highly sensitive to the silicate concentration, which impacts both the gelation time and ionic strength conditions. The Ludox content was crucial for cyanobacteria as it strongly impacts the Young's modulus of the matrices. The detrimental effect of acidic pH on cell suspension was compensated by the silica network. Overall, it is now possible to select optimal encapsulation conditions based on the physiology of the targeted cells, opening wide perspectives for the design of biosensors and bioreactors.

Testing nanoeffect onto model bacteria: Impact of speciation and genotypes.

The gram-negative bacteria Escherichia coli (E. coli) is a very useful prokaryotic model for testing the toxicity of ZnO nanoparticles (nano-ZnO). This toxicity is often linked to Zn(2+) released from nanoparticles in the culture medium, and nano-ZnO dissolution in different media is clearly established. Here, two model E. coli strains MG1655 and W3110 both descendant from the original K-12 showing slight differences in their genome were submitted to nano-ZnO or Zn(2+) in order 1 > to refine the nano-ZnO toxicity mechanisms to E. coli, and 2 > to investigate whether toxicity resulted from a real "nanoparticle" effect or from the release of Zn(2+) in solution. To do so, both strains were submitted to various concentrations (i.e., 0.1-1 mM) of nano-ZnO or Zn(2+) in Luria Bertani (LB) medium. These toxicity studies take into account the nano-ZnO solubility in the culture medium by specifically monitoring the Zn(2+) release in our experimental systems. In our experimental conditions, differences in tolerance to nano-ZnO or Zn(2+) between both strains were clearly evidenced. W3110 is generally more tolerant to metal than MG1655, the latter showing no real difference in its sensitivity to the two zinc added forms unlike W3110. The differences in behavior between both strains could be attributed to differences in the two genomes as a mutation named "amber" in W3110. Moreover, by using these two closely E. coli strains, a real "nano" effect is here clearly demonstrated providing a model to study the toxicity of ZnO nanoparticles.

The Fate of Polyol-Made ZnO and CdS Nanoparticles in Seine River Water (Paris, France).

This study aims to characterize nanoparticles with different compositions and structures as well as seeing their evolutions over time in a natural environment such as Seine river water (Paris, France). Face centered cubic (fcc) and hexagonal (hcp) CdS as well as hexagonal (hcp) ZnO nanoparticles were synthesized by the Polyol method. CdS nanoparticles (i) cfc structure: are agglomerated, present 100 nm length with heterogeneous diameter and 10 m2 g(-1) specific surface area (S(g)) from Brunauer Emett and Teller (BET) measurements; (ii) hcp structure: 20 nm and S(g) = 67 m2 g(-1). ZnO hcp nanoparticles presents 50 nm length and 15 nm diameter and S(g) = 54 m2 g(-1). These results are in agreement with X-ray diffraction (XRD), and small angle X-ray scattering (SAXs). After 48 h interaction with Seine river water, cryo-TEM analysis showed that ZnO nanoparticles form spherical agglomerates with 300 nm diameter; CdS nanoparticles (fcc) are agglomerated presenting large diameters (> 500 nm); and CdS nanoparticles (hcp) are not agglomerated and present the same characteristics of the starting material. After 168h of contact with Seine river water, CdS (fcc) presents only 14% of dissolution, CdS (hcp) presents both 60% dissolution and 30% reprecipitation in a cadmium carbonate form and finally almost 90% of ZnO nanoparticles are dissolved.

Direct and indirect toxic effects of cotton-derived cellulose nanofibres on filamentous green algae.

Recently, cellulose nanofibers (CNFs) have attracted considerable attention as natural, abundant polymers with excellent mechanical properties and biodegradability. CNFs provide a new materials platform for the sustainable production of high-performance nano-enable products for various applications. Given the increasing rates of CNF production, the potential for their release to the environment and the subsequent impact on ecosystem is becoming an increasing concern that needs to be addressed. Here, we used the Klebsormidium flaccidum as a bioindicator organism of terrestrial and freshwater habitats pollution using a battery of biomarkers. Our results show that cotton CNFs inhibit the proliferation of algae and induce morphological changes in them. The two main toxicity mechanisms induced by cotton CNFs are: (i) a direct contact of CNFs with the cell wall and cellular membrane and (ii) an indirect effect through the generation of reactive oxygen species (ROS).

Size-dependent ecotoxicity of barium titanate particles: the case of Chlorella vulgaris green algae.

Studies have been demonstrating that smaller particles can lead to unexpected and diverse ecotoxicological effects when compared to those caused by the bulk material. In this study, the chemical composition, size and shape, state of dispersion, and surface's charge, area and physicochemistry of micro (BT MP) and nano barium titanate (BT NP) were determined. Green algae Chlorella vulgaris grown in Bold's Basal (BB) medium or Seine River water (SRW) was used as biological indicator to assess their aquatic toxicology. Responses such as growth inhibition, cell viability, superoxide dismutase (SOD) activity, adenosine-5-triphosphate (ATP) content and photosynthetic activity were evaluated. Tetragonal BT (~170 nm, 3.24 m(2) g(-1) surface area) and cubic BT (~60 nm, 16.60 m(2) g(-1)) particles were negative, poorly dispersed, and readily aggregated. BT has a statistically significant effect on C. vulgaris growth since the lower concentration tested (1 ppm), what seems to be mediated by induced oxidative stress caused by the particles (increased SOD activity and decreased photosynthetic efficiency and intracellular ATP content). The toxic effects were more pronounced when the algae was grown in SRW. Size does not seem to be an issue influencing the toxicity in BT particles toxicity since micro- and nano-particles produced significant effects on algae growth.

Silica@proton-alginate microreactors: a versatile platform for cell encapsulation.

As an alternative approach to the well known Ca(ii)-alginate encapsulation process within silica hydrogels, proton-driven alginate gelation was investigated in order to establish its capacity as a culture carrier, both isolated and embedded in an inorganic matrix. Control over the velocity of the proton-gelation front allows the formation of a hydrogel shell while the core remains liquid, allowing bacteria and microalgae to survive the strongly acidic encapsulation process. Once inside the inorganic host, synthesized by a sol-gel process, the capsules spontaneously redissolve without the aid of external complexing agents. The entrapped cells survive the two-step process to a significant extent; culture's growth restores the initial cell count in less than two weeks. Biosynthesis of Au nanoparticles mediated by the entrapped microalgae illustrates the preservation of the biosynthetic abilities supported by this platform.

Ecotoxicological studies of micro- and nanosized barium titanate on aquatic photosynthetic microorganisms.

The interaction between live organisms and micro- or nanosized materials has become a current focus in toxicology. As nanosized barium titanate has gained momentum lately in the medical field, the aims of the present work are: (i) to assess BT toxicity and its mechanisms on the aquatic environment, using two photosynthetic organisms (Anabaena flos-aquae, a colonial cyanobacteria, and Euglena gracilis, a flagellated euglenoid); (ii) to study and correlate the physicochemical properties of BT with its toxic profile; (iii) to compare the BT behavior (and Ba(2+) released ions) and the toxic profile in synthetic (Bold's Basal, BB, or Mineral Medium, MM) and natural culture media (Seine River Water, SRW); and (iv) to address whether size (micro, BT MP, or nano, BT NP) is an issue in BT particles toxicity. Responses such as growth inhibition, cell viability, superoxide dismutase (SOD) activity, adenosine-5-triphosphate (ATP) content and photosynthetic efficiency were evaluated. The main conclusions are: (i) BT have statistically significant toxic effects on E. gracilis growth and viability even in small concentrations (1µgmL(-1)), for both media and since the first 24 h; on the contrary of on A. flos-aquae, to whom the effects were noticeable only for the higher concentrations (after 96 h: ≥75 µg mL(-1) for BT NP and =100 µg mL(-1) for BT MP, in BB; and ≥75 µg mL(-1) for both materials in SRW), in spite of the viability being affected in all concentrations; (ii) the BT behaviors in synthetic and natural culture media were slightly different, being the toxic effects more pronounced when grown in SRW - in this case, a worse physiological state of the organisms in SRW can occur and account for the lower resistance, probably linked to a paucity of nutrients or even a synergistic effect with a contaminant from the river; and (iii) the effects seem to be mediated by induced stress without a direct contact in A. flos-aquae and by direct endocytosis in E. gracilis, but in both organisms the contact with both BT MP and BT NP increased SOD activity and decreased photosynthetic efficiency and intracellular ATP content; and (iv) size does not seem to be an issue in BT particles toxicity since micro- and nano-particles produced significant toxic for the model-organisms.

Ecotoxicological effects of carbon nanotubes and cellulose nanofibers in Chlorella vulgaris.

BACKGROUND: MWCNT and CNF are interesting NPs that possess great potential for applications in various fields such as water treatment, reinforcement materials and medical devices. However, the rapid dissemination of NPs can impact the environment and in the human health. Thus, the aim of this study was to evaluate the MWCNT and cotton CNF toxicological effects on freshwater green microalgae Chlorella vulgaris. RESULTS: Exposure to MWCNT and cotton CNF led to reductions on algal growth and cell viability. NP exposure induced reactive oxygen species (ROS) production and a decreased of intracellular ATP levels. Addition of NPs further induced ultrastructural cell damage. MWCNTs penetrate the cell membrane and individual MWCNTs are seen in the cytoplasm while no evidence of cotton CNFs was found inside the cells. Cellular uptake of MWCNT was observed in algae cells cultured in BB medium, but cells cultured in Seine river water did not internalize MWCNTs. CONCLUSIONS: Under the conditions tested, such results confirmed that exposure to MWCNTs and to cotton CNFs affects cell viability and algal growth.

Design of Magnetic Gelatine/Silica Nanocomposites by Nanoemulsification: Encapsulation versus in Situ Growth of Iron Oxide Colloids.

The design of magnetic nanoparticles by incorporation of iron oxide colloids within gelatine/silica hybrid nanoparticles has been performed for the first time through a nanoemulsion route using the encapsulation of pre-formed magnetite nanocrystals and the in situ precipitation of ferrous/ferric ions. The first method leads to bi-continuous hybrid nanocomposites containing a limited amount of well-dispersed magnetite colloids. In contrast, the second approach allows the formation of gelatine-silica core-shell nanostructures incorporating larger amounts of agglomerated iron oxide colloids. Both magnetic nanocomposites exhibit similar superparamagnetic behaviors. Whereas nanocomposites obtained via an in situ approach show a strong tendency to aggregate in solution, the encapsulation route allows further surface modification of the magnetic nanocomposites, leading to quaternary gold/iron oxide/silica/gelatine nanoparticles. Hence, such a first-time rational combination of nano-emulsion, nanocrystallization and sol-gel chemistry allows the elaboration of multi-component functional nanomaterials. This constitutes a step forward in the design of more complex bio-nanoplatforms.

Intracellular biosynthesis of superparamagnetic 2-lines ferri-hydrite nanoparticles using Euglena gracilis microalgae.

The intracellular biosynthesis of superparamagnetic (blocking temperature 5.6K) 2-lines ferrihydrite (Fh2L) nanoparticles was observed within living Euglena gracilis microalgae.

Recycling and adaptation of Klebsormidium flaccidum microalgae for the sustained production of gold nanoparticles.

Targeting the development of cell-based bioreactors for the production of metal nanoparticles, the possibility to perform the sustained synthesis of colloidal gold using Klebsormidium flaccidum green algae was studied. A first strategy relying on successive growth/reduction/reseeding recycling steps demonstrated maintained biosynthesis capability of the microalgae but limitation in metal content due to toxic effects. An alternative approach consisting of progressive gold salt addition revealed to be suitable to favor cell adaptation to larger metal concentrations and supported particle release over month periods.

Micro-algal biosensors.

Fighting against water pollution requires the ability to detect pollutants for example herbicides or heavy metals. Micro-algae that live in marine and fresh water offer a versatile solution for the construction of novel biosensors. These photosynthetic microorganisms are very sensitive to changes in their environment, enabling the detection of traces of pollutants. Three groups of micro-algae are described in this paper: chlorophyta, cyanobacteria, and diatoms.