Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
J Phys Chem Lett ; 15(18): 4844-4850, 2024 May 09.
Artigo em Inglês | MEDLINE | ID: mdl-38682807

RESUMO

Most single quantum emitters display non-steady emission properties. Models that explain this effect have primarily relied on photoluminescence measurements that reveal variations in intensity, wavelength, and excited-state lifetime. While photoluminescence excitation spectroscopy could provide complementary information, existing experimental methods cannot collect spectra before individual emitters change in intensity (blink) or wavelength (spectrally diffuse). Here, we present an experimental approach that circumvents such issues, allowing the collection of excitation spectra from individual emitters. Using rapid modulation of the excitation wavelength, we collect and classify excitation spectra from individual CdSe/CdS/ZnS core/shell/shell quantum dots. The spectra, along with simultaneous time-correlated single-photon counting, reveal two separate emission-reduction mechanisms caused by charging and trapping, respectively. During bright emission periods, we also observe a correlation between emission red-shifts and the increased oscillator strength of higher excited states. Quantum-mechanical modeling indicates that diffusion of charges in the vicinity of an emitter polarizes the exciton and transfers the oscillator strength to higher-energy transitions.

2.
Anal Chem ; 95(5): 2857-2864, 2023 Feb 07.
Artigo em Inglês | MEDLINE | ID: mdl-36700547

RESUMO

Volatile organic compounds (VOCs) exhibit typically broad and mutually overlapping ro-vibrational absorption fingerprints. This complexity has so far limited the applicability of laser-based spectroscopy for VOC measurements in complex gas matrices. Here, we exploit a Vernier-type quantum-cascade laser (QCL) as an electrically tunable multiwavelength source for selective and sensitive VOC analysis. This emerging class of lasers provides access to several spectral windows by discrete Vernier tuning ("switching") and continuous coverage within these windows ("scanning"). We present a versatile driving technique that efficiently combines the two tuning mechanisms. Applied to our Vernier QCL, it enables the rapid acquisition (within 360 ms) of high-resolution spectra from six individual spectral windows, distributed over a wide range from 1063 to 1102 cm-1. Gaining access to the broad absorption envelopes of VOCs at multiple frequencies, along with their superimposed fine structure, which are especially pronounced at a reduced sample pressure, offers completely new opportunities in VOC analysis. The potential of this approach is assessed in a direct-laser-absorption setup with acetaldehyde, ethanol, and methanol as benchmark compounds with significant spectral overlaps. A measurement precision of 1-10 ppb is obtained after integration for 10 s at amount fractions below 10 ppm, and excellent linearity is found over at least 3 orders of magnitude. Combined with our dedicated spectral fitting algorithm, we demonstrate highly selective multicompound analyses with less than 3.5% relative expanded uncertainty, even in the presence of a 40× excess of an interfering compound with complete spectral overlap.

3.
J Phys Chem Lett ; 13(18): 4145-4151, 2022 May 12.
Artigo em Inglês | MEDLINE | ID: mdl-35506998

RESUMO

In semiconductor nanocrystals, excited electrons relax through multiple radiative and nonradiative pathways. This complexity complicates characterization of their decay processes with standard time- and temperature-dependent photoluminescence studies. Here, we exploit a simple nanophotonic approach to augment such measurements and to address open questions related to nanocrystal emission. We place nanocrystals at different distances from a gold reflector to affect radiative rates through variations in the local density of optical states. We apply this approach to spherical CdSe-based nanocrystals to probe the radiative efficiency and polarization properties of the lowest dark and bright excitons by analyzing temperature-dependent emission dynamics. For CdSe-based nanoplatelets, we identify the charge-carrier trapping mechanism responsible for strongly delayed emission. Our method, when combined with careful modeling of the influence of the nanophotonic environment on the relaxation dynamics, offers a versatile strategy to disentangle the complex excited-state decay pathways present in fluorescent nanocrystals as well as other emitters.

4.
ACS Nano ; 15(12): 19185-19193, 2021 Dec 28.
Artigo em Inglês | MEDLINE | ID: mdl-34780165

RESUMO

Optical beams with helical phase fronts carry orbital angular momentum (OAM). To exploit this property in integrated photonics, micrometer-scale devices that generate beams with well-defined OAM are needed. Consequently, lasers based on microring resonators decorated with azimuthal grating elements have been investigated. However, future development of such devices requires better methods to determine their OAM, as current approaches are challenging to implement and interpret. If a simple and more sensitive technique were available, OAM microring lasers could be better understood and further improved. In particular, despite most devices being pulsed, their OAM output has been assumed to be constant. OAM fluctuations, which are detrimental for applications, need to be quantified. Here, we fabricate quantum-dot microring lasers and demonstrate a simple measurement method that can straightforwardly determine the magnitude and sign of the OAM down to the level of individual laser pulses. We exploit a Fourier microscope with a cylindrical lens and then investigate three types of microring lasers: with circular symmetry, with "blazed" grating elements, and with unidirectional rotational modes. Our results confirm that previous measurement techniques obscured key details about the OAM generation. For example, while time-averaged OAM from our unidirectional laser is very similar to our blazed grating device, single-pulse measurements show that detrimental effects of mode competition are almost entirely suppressed in the former. Nevertheless, even in this case, the OAM output exhibits shot-to-shot fluctuations. Thus, our approach reveals important details in the underlying device operation that can aid in the improvement of micrometer-scale sources with pure OAM output.

5.
ACS Nano ; 15(6): 9935-9944, 2021 Jun 22.
Artigo em Inglês | MEDLINE | ID: mdl-34029074

RESUMO

Plasmonic modes in optical cavities can be amplified through stimulated emission. Using this effect, plasmonic lasers can potentially provide chip-integrated sources of coherent surface plasmon polaritons (SPPs). However, while plasmonic lasers have been experimentally demonstrated, they have not generated propagating plasmons as their primary output signal. Instead, plasmonic lasers typically involve significant emission of free-space photons that are intentionally outcoupled from the cavity by Bragg diffraction or that leak from reflector edges due to uncontrolled scattering. Here, we report a simple cavity design that allows for straightforward extraction of the lasing mode as SPPs while minimizing photon leakage. We achieve plasmonic lasing in 10-µm-long distributed-feedback cavities consisting of a Ag surface periodically patterned with ridges coated by a thin layer of colloidal semiconductor nanoplatelets as the gain material. The diffraction to free-space photons from cavities designed with second-order feedback allows a direct experimental examination of the lasing-mode profile in real- and momentum-space, in good agreement with coupled-wave theory. In contrast, we demonstrate that first-order-feedback cavities remain "dark" above the lasing threshold and the output signal leaves the cavity as propagating SPPs, highlighting the potential of such lasers as on-chip sources of plasmons.

6.
Nature ; 582(7813): 506-510, 2020 06.
Artigo em Inglês | MEDLINE | ID: mdl-32581384

RESUMO

Gratings1 and holograms2 use patterned surfaces to tailor optical signals by diffraction. Despite their long history, variants with remarkable functionalities continue to be developed3,4. Further advances could exploit Fourier optics5, which specifies the surface pattern that generates a desired diffracted output through its Fourier transform. To shape the optical wavefront, the ideal surface profile should contain a precise sum of sinusoidal waves, each with a well defined amplitude, spatial frequency and phase. However, because fabrication techniques typically yield profiles with at most a few depth levels, complex 'wavy' surfaces cannot be obtained, limiting the straightforward mathematical design and implementation of sophisticated diffractive optics. Here we present a simple yet powerful approach to eliminate this design-fabrication mismatch by demonstrating optical surfaces that contain an arbitrary number of specified sinusoids. We combine thermal scanning-probe lithography6-8 and templating9 to create periodic and aperiodic surface patterns with continuous depth control and sub-wavelength spatial resolution. Multicomponent linear gratings allow precise manipulation of electromagnetic signals through Fourier-spectrum engineering10. Consequently, we overcome a previous limitation in photonics by creating an ultrathin grating that simultaneously couples red, green and blue light at the same angle of incidence. More broadly, we analytically design and accurately replicate intricate two-dimensional moiré patterns11,12, quasicrystals13,14 and holograms15,16, demonstrating a variety of previously unattainable diffractive surfaces. This approach may find application in optical devices (biosensors17, lasers18,19, metasurfaces4 and modulators20) and emerging areas in photonics (topological structures21, transformation optics22 and valleytronics23).

7.
J Phys Chem Lett ; 10(13): 3732-3738, 2019 Jul 05.
Artigo em Inglês | MEDLINE | ID: mdl-31204809

RESUMO

Nearly all colloidal quantum dots, when measured at the single-emitter level, exhibit fluorescence "blinking". However, despite over 20 years of research on this phenomenon, its microscopic origins are still debated. One reason is a gap in available experimental information, specifically for dynamics at short (submillisecond) time scales. Here, we use photon-correlation analysis to investigate microsecond blinking events in individual quantum dots. While the strongly distributed kinetics of blinking normally makes such events difficult to study, we show that they can be analyzed by excluding photons emitted during long bright or dark periods. Moreover, we find that submillisecond blinking events are more common than one might expect from extrapolating the power-law blinking statistics observed on longer (millisecond) time scales. This result provides important experimental data for developing a microscopic understanding of blinking. More generally, our method offers a simple strategy for analyzing microsecond switching dynamics in the fluorescence of quantum emitters.

8.
Phys Rev Lett ; 121(11): 113601, 2018 Sep 14.
Artigo em Inglês | MEDLINE | ID: mdl-30265099

RESUMO

Fifty years ago, Drexhage et al. showed how photon emission from an electric dipole can be modified by a nearby mirror. Here, we study the two-dimensional analog for surface plasmon polaritons (SPPs). We print Eu^{3+}-doped nanoparticles, which act as both electric- and magnetic-dipole sources of SPPs, near plasmonic reflectors on flat Ag films. We measure modified SPP radiation patterns and emission rates as a function of reflector distance and source symmetry. The results, which agree with an analytical self-interference model, provide simple strategies to control SPP radiation in plasmonic devices.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...