Beamline simulations using monochromators with high d-spacing crystals.

Monochromators for synchrotron radiation beamlines typically use perfect crystals for the hard X-ray regime and gratings for soft X-rays. There is an intermediate range, typically 1-3 keV (tender X-rays), which common perfect crystals have difficulties covering and gratings have low efficiency, although some less common crystals with high d-spacing could be suitable. To evaluate the suitability of these crystals for a particular beamline, it is useful to evaluate the crystals' performance using tools such as ray-tracing. However, simulations for double-crystal monochromators are only available for the most used crystals such as Si, Ge or diamond. Here, an upgrade of the SHADOW ray-tracing code and complementary tools in the OASYS suite are presented to simulate high d-spacing crystals with arbitrary, and sometimes complex, structures such as beryl, YB66, muscovite, etc. Isotropic and anisotropic temperature factors are also considered. The YB66 crystal with 1936 atomic sites in the unit cell is simulated, and its applicability for tender X-ray monochromators is discussed in the context of new low-emittance storage rings.

Anomalous Ferromagnetism of quasiparticle doped holes in cuprate heterostructures revealed using resonant soft X-ray magnetic scattering.

We report strong ferromagnetism of quasiparticle doped holes both within the ab-plane and along the c-axis of Cu-O planes in low-dimensional Au/d-La1.8Ba0.2CuO4/LaAlO3(001) heterostructures (d = 4, 8 and 12 unit-cells) using resonant soft X-ray and magnetic scattering together with X-ray magnetic circular dichroism. Interestingly, ferromagnetism is stronger at a hole doped peak and at an upper Hubbard band of O with spin-polarization degree as high as 40%, revealing strong ferromagnetism of Mottness. For in-ab-plane spin-polarizations, the spin of doped holes in O2p-Cu3d-O2p is a triplet state yielding strong ferromagnetism. For out-of-ab-plane spin-polarization, while the spins of doped holes in both O2p-O2p and Cu3d-Cu3d are triplet states, the spin of doped holes in Cu3d-O2p is a singlet state yielding ferrimagnetism. A ferromagnetic-(002) Bragg-peak of the doped holes is observed and enhanced as a function of d revealing strong ferromagnetism coupling between Cu-O layers along the c-axis.

Wafer scale manufacturing of high precision micro-optical components through X-ray lithography yielding 1800 Gray Levels in a fingertip sized chip.

We present a novel x-ray lithography based micromanufacturing methodology that offers scalable manufacturing of high precision optical components. It is accomplished through simultaneous usage of multiple stencil masks made moveable with respect to one another through custom made micromotion stages. The range of spectral flux reaching the sample surface at the LiMiNT micro/nanomanufacturing facility of Singapore Synchrotron Light Source (SSLS) is about 2 keV to 10 keV, offering substantial photon energy to carry out deep x-ray lithography. In this energy range, x-rays penetrate through resist materials with only little scattering. The highly collimated rectangular beam architecture of the x-ray source enables a full 4″ wafer scale fabrication. Precise control of dose deposited offers determined chain scission in the polymer to required depth enabling 1800 discrete gray levels in a chip of area 20 mm2 and with more than 2000 within our reach. Due to its parallel processing capability, our methodology serves as a promising candidate to fabricate micro/nano components of optical quality on a large scale to cater for industrial requirements. Usage of these fine components in analytical devices such as spectrometers and multispectral imagers transforms their architecture and shrinks their size to pocket dimension. It also reduces their complexity and increases affordability while also expanding their application areas. Consequently, equipment based on these devices is made available and affordable for consumers and businesses expanding the horizon of analytical applications. Mass manufacturing is especially vital when these devices are to be sold in large quantities especially as components for original equipment manufacturers (OEM), which has also been demonstrated through our work. Furthermore, we also substantially improve the quality of the micro-components fabricated, 3D architecture generated, throughput, capability and availability for industrial application. Manufacturing 1800 Gray levels or more through other competing techniques is either limited due to multiple process steps involved or due to unacceptably long time required owing to their pencil beam architecture. Our manufacturing technique presented here overcomes both these shortcomings in terms of the maximum number of gray levels that can be generated, and the time required to generate the same.

Unravelling strong electronic interlayer and intralayer correlations in a transition metal dichalcogenide.

Electronic correlations play important roles in driving exotic phenomena in condensed matter physics. They determine low-energy properties through high-energy bands well-beyond optics. Great effort has been made to understand low-energy excitations such as low-energy excitons in transition metal dichalcogenides (TMDCs), however their high-energy bands and interlayer correlation remain mysteries. Herewith, by measuring temperature- and polarization-dependent complex dielectric and loss functions of bulk molybdenum disulphide from near-infrared to soft X-ray, supported with theoretical calculations, we discover unconventional soft X-ray correlated-plasmons with low-loss, and electronic transitions that reduce dimensionality and increase correlations, accompanied with significantly modified low-energy excitons. At room temperature, interlayer electronic correlations, together with the intralayer correlations in the c-axis, are surprisingly strong, yielding a three-dimensional-like system. Upon cooling, wide-range spectral-weight transfer occurs across a few tens of eV and in-plane p-d hybridizations become enhanced, revealing strong Coulomb correlations and electronic anisotropy, yielding a two-dimensional-like system. Our result shows the importance of strong electronic, interlayer and intralayer correlations in determining electronic structure and opens up applications of utilizing TMDCs on plasmonic nanolithrography.

Nanoscale dielectric grating polarizers tuned to 4.43†eV for ultraviolet polarimetry.

Transmissive dielectric wire grid polarizers tuned to 4.43 eV (Mg II line, 280 nm), an important diagnostic line for solar physics, are presented in this communication. The polarizers are based on TiO2 gratings and designed with a period of ∼140 nm (7143 lines/mm), 40 nm line width (duty cycle of 0.286), and 100 nm line height. Several gratings are fabricated through electron beam lithography combined with reactive ion etching, whereby two parameters in the nanofabrication process are explored: e-beam dosage on the photoresist and TiO2 etching time. Polarization of samples is optically characterized using a spectroscopic ellipsometer in transmission mode, achieving the best result with an extinction ratio of ∼109 and a transmittance of 16.4% at the target energy of 4.43 eV. The shape of the gratings is characterized through atomic force microscopy (AFM) and scanning electron microscopy (SEM); the measured AFM profiles are distorted by the tip geometry, hence a simple deconvolution procedure is implemented to retrieve the real profile. By analysing the AFM and SEM profiles, we find that the real shapes of the different gratings are close to the design, but with a larger duty cycle than the intended value. With the real grating geometry, an improved model of the best sample was built with a finite-difference time-domain (FDTD) method that matches the result obtained through optical characterization.

A soft x-ray-ultraviolet (SUV) beamline and diffractometer for resonant elastic scattering and ultraviolet-vacuum ultraviolet reflectance at the Singapore synchrotron light source.

A new beamline and a six-circle UHV diffractometer have been constructed at the Singapore Synchrotron Light Source with a broad energy coverage from 3.5 to 1500 eV. The beamline is optimized for ultraviolet-vacuum-ultraviolet optical reflectivity and resonant soft X-ray scattering with medium energy resolution over a broad energy range, achieved by using a self-focusing monochromator consisting of a plane mirror and three variable line spacing gratings. The unique character of the diffractometer comprises 4-circles in the vertical plane and 2-circles in the horizontal plane. Thirteen motions are available inside the UHV chamber with a base pressure of 1 × 10-9 mbar. Two sample holders working independently over a temperature range of 37 K-400 K are controlled by a closed-cycle cryostat, while the bottom holder inside a high field compact pulsed magnet is available for measurements requiring a magnetic field.

Electron transport and visible light absorption in a plasmonic photocatalyst based on strontium niobate.

Semiconductor compounds are widely used for photocatalytic hydrogen production applications, where photogenerated electron-hole pairs are exploited to induce catalysis. Recently, powders of a metallic oxide (Sr1-xNbO3, 0.03

Is it possible to find presence of lactose in pharmaceuticals? - Preliminary studies by ATR-FTIR spectroscopy and chemometrics.

Lactose and saccharose have the same molecular formula; however, the arrangement of their atoms is different. A major difference between lactose and saccharose with regard to digestion and processing is that it is not uncommon for individuals to be lactose intolerant (around two thirds of the population has a limited ability to digest lactose after infancy), but it is rather unlikely to be saccharose intolerant. The pharmaceutical industry uses lactose and saccharose as inactive ingredients of drugs to help form tablets because of their excellent compressibility properties. Some patients with severe lactose intolerance may experience symptoms of many allergic reactions after taking medicine that contains this substance. People who are specifically "allergic" to lactose (not just lactose intolerant) should not use tablets containing this ingredient. Fourier Transform Infrared (FTIR) spectroscopy has a unique chemical fingerprinting capability and plays a significant important role in the identification and characterization of analyzed samples and hence has been widely used in pharmaceutical science. However, a typical FTIR spectrum collected from tablets contains a myriad of valuable information hidden in a family of tiny peaks. Powerful multivariate spectral data processing can transform FTIR spectroscopy into an ideal tool for high volume, rapid screening and characterization of even minor tablet components. In this paper a method for distinction between FTIR spectra collected for tablets with or without lactose is presented. The results seem to indicate that the success of identifying one component in FTIR spectra collected for pharmaceutical composition (that is tablet) is largely dependent on the choice of the chemometric technique applied.

Fabrication of 3D photonic components on bulk crystalline silicon.

We have fabricated three dimensional photonic components such as waveguides and beam splitters from crystalline silicon using a process based on one or more ion irradiation steps with different energies and fluences, followed by electrochemical anodization and thermal annealing. We first demonstrate the fabrication of multilevel silicon waveguides and then extend this process to make multilevel beam splitters, in which three output waveguides are distributed over two depths. The dimensions of the waveguides can be defined within a range from 0.5 µm to several micrometers simply by varying the ion beam fluence.

The pituitary gland under infrared light - in search of a representative spectrum for homogeneous regions.

The pituitary gland is a small but vital organ in the human body. It is located at the base of the brain and is often described as the master gland due to its multiple functions. The pituitary gland secretes and stores hormones, such as the thyroid-stimulating hormone (TSH), adrenocorticotropic hormone (ACTH), growth hormone (hGH), prolactin, gonadotropins, and luteinizing hormones, as well as the antidiuretic hormone (ADH). A proper diagnosis of pituitary disorders is of utmost importance as this organ participates in regulating a variety of body functions. Typical histopathological analysis provides much valuable information, but it gives no insight into the biochemical background of the changes that occur within the gland. One approach that could be used to evaluate the biochemistry of tissue sections obtained from pituitary disorders is Fourier Transform Infra-Red (FTIR) spectromicroscopy. In order to collect diagnostically valuable information large areas of tissue must be investigated. This work focuses on obtaining a unique and representative FTIR spectrum characteristic of one type of cell architecture within a sample. The idea presented is based on using hierarchical cluster analysis (HCA) for data evaluation to search for uniform patterns within samples from the perspective of FTIR spectra. The results obtained demonstrate that FTIR spectromicroscopy, combined with proper statistical evaluation, can be treated as a complementary method for histopathological analysis and ipso facto can increase the sensitivity and specificity for detecting various disorders not only for the pituitary gland, but also for other human tissues.

Nanoscale lithography of LaAlO3/SrTiO3 wires using silicon stencil masks.

We have developed a process to fabricate low-stress, fully crystalline silicon nanostencils, based on ion irradiation and the electrochemical anodization of p-type silicon. These nanostencils can be patterned with arbitrary feature shapes with openings hundreds of micrometers wide connected to long channels of less than 100 nm in width. These nanostencils have been used to deposit (2.5 µm- to 150 nm-wide) lines of LaAlO3 (LAO) on a SrTiO3 (STO) substrate, forming a confined electron layer at the interface arising from oxygen vacancies on the STO surface. Electrical characterization of the transport properties of the resulting LAO/STO nanowires exhibited a large electric field effect through back-gating using the STO as the dielectric, demonstrating electron confinement. Stencil lithography incorporating multiple feature sizes in a single mask shows great potential for future development of oxide electronics.

Fabrication of silicon molds with multi-level, non-planar, micro- and nano-scale features.

A method for single-step fabrication of arbitrary, complex, three-dimensional (3D) silicon structures from the nano- to millimeter-scale at multiple levels on non-planar, curved, or domed surfaces is reported. The fabrication is based on focused or masked ion beam irradiation of p-type silicon followed by electrochemical anodization. The process allows fabrication of a wide range of surface features at multiple heights and with arbitrary orientations by varying the irradiated feature width, ion type, energy fluence, and subsequent anodization conditions. The technology has achieved depth resolution of 10 nm as step heights and is capable of creating lateral features down to 7 nm at high aspect ratios of up to 40, with surface roughness down to 1 nm scaled up to full wafer areas. The single-step ability has seamlessly interfaced a network of complex, integrated micro- to nano-structures in 3D orientations with no alignment required. The final template has been converted to a master copy for nano-imprinting lithography of 3D fluidic structures and optical components.

Electronic screening-enhanced hole pairing in two-leg spin ladders studied by high-resolution resonant inelastic x-ray scattering at Cu M edges.

We study the electronic screening mechanisms of the effective Coulomb on-site repulsion in hole-doped Sr(14)Cu(24)O(41) compared to undoped La(6)Ca(8)Cu(24)O(41) using polarization dependent high-resolution resonant inelastic x-ray scattering at Cu M edges. By measuring the energy of the effective Coulomb on-site repulsion and the spin excitations, we estimate superexchange and hopping matrix element energies along rungs and legs, respectively. Interestingly, hole doping locally screens the Coulomb on-site repulsion reducing it by as much as 25%. We suggest that the increased ratio of the electronic kinetic to the electronic correlation energy contributes to the local superexchange mediated pairing between holes.

Mechanisms of charge transfer and redistribution in LaAlO3/SrTiO3 revealed by high-energy optical conductivity.

In condensed matter physics the quasi two-dimensional electron gas at the interface of two different insulators, polar LaAlO3 on nonpolar SrTiO3 (LaAlO3/SrTiO3) is a spectacular and surprising observation. This phenomenon is LaAlO3 film thickness dependent and may be explained by the polarization catastrophe model, in which a charge transfer of 0.5e(-) from the LaAlO3 film into the LaAlO3/SrTiO3 interface is expected. Here we show that in conducting samples (≥ 4 unit cells of LaAlO3) there is indeed a ~0.5e(-) transfer from LaAlO3 into the LaAlO3/SrTiO3 interface by studying the optical conductivity in a broad energy range (0.5-35 eV). Surprisingly, in insulating samples (≤ 3 unit cells of LaAlO3) a redistribution of charges within the polar LaAlO3 sublayers (from AlO2 to LaO) as large as ~0.5e(-) is observed, with no charge transfer into the interface. Hence, our results reveal the different mechanisms for the polarization catastrophe compensation in insulating and conducting LaAlO3/SrTiO3 interfaces.

Spectroscopic detection of exogenous materials in latent fingerprints treated with powders and lifted off with adhesive tapes.

Fingerprint evidence offers great value to criminal investigations since it is an internationally recognized and established means of human identification. With recent advances in modern technology, scientists have started analyzing not only the ridge patterns of fingerprints but also substances which can be found within them. The aim of this work was to determine whether Fourier transform infrared (FTIR) spectromicroscopy could be used to detect contamination in a fingerprint which was dusted with powder (a technique already recognized as an effective and reliable method for developing latent fingerprints) and subsequently lifted off with adhesive tape. Explosive materials (pentaerythritol tetranitrate, C-4, TNT) and noncontrolled substances (sugar, aspirin) were used to prepare contaminated fingerprints on various substrates. Freshly deposited fingermarks with powders which were lifted off with adhesive tapes (provided by Singapore Police Force) were analyzed using a Bruker Hyperion 2000 microscope at the ISMI beamline (Singapore Synchrotron Light Source) with an attenuated total reflection objective. FTIR spectroscopy is a nondestructive technique which requires almost no sample preparation. Further, the fingerprint under analysis remains in pristine condition, allowing subsequent analysis if necessary. All analyzed substances were successfully distinguished using their FTIR spectra in powdered and lifted fingerprints. This method has the potential to significantly impact forensic science by greatly enhancing the information that can be obtained from the study of fingerprints.

Reprogramming hMSCs morphology with silicon/porous silicon geometric micro-patterns.

Geometric micro-patterned surfaces of silicon combined with porous silicon (Si/PSi) have been manufactured to study the behaviour of human Mesenchymal Stem Cells (hMSCs). These micro-patterns consist of regular silicon hexagons surrounded by spaced columns of silicon equilateral triangles separated by PSi. The results show that, at an early culture stage, the hMSCs resemble quiescent cells on the central hexagons with centered nuclei and actin/ß-catenin and a microtubules network denoting cell adhesion. After 2 days, hMSCs adapted their morphology and cytoskeleton proteins from cell-cell dominant interactions at the center of the hexagonal surface. This was followed by an intermediate zone with some external actin fibres/ß-catenin interactions and an outer zone where the dominant interactions are cell-silicon. Cells move into silicon columns to divide, migrate and communicate. Furthermore, results show that Runx2 and vitamin D receptors, both specific transcription factors for skeleton-derived cells, are expressed in cells grown on micropatterned silicon under all observed circumstances. On the other hand, non-phenotypic alterations are under cell growth and migration on Si/PSi substrates. The former consideration strongly supports the use of micro-patterned silicon surfaces to address pending questions about the mechanisms of human bone biogenesis/pathogenesis and the study of bone scaffolds.

Cationic-vacancy-induced room-temperature ferromagnetism in transparent, conducting anatase Ti1-xTaxO2 (x~0.05) thin films.

We report room-temperature ferromagnetism (FM) in highly conducting, transparent anatase Ti(1-x)Ta(x)O(2) (x∼0.05) thin films grown by pulsed laser deposition on LaAlO(3) substrates. Rutherford backscattering spectrometry (RBS), X-ray diffraction, proton-induced X-ray emission, X-ray absorption spectroscopy (XAS) and time-of-flight secondary-ion mass spectrometry indicated negligible magnetic contaminants in the films. The presence of FM with concomitant large carrier densities was determined by a combination of superconducting quantum interference device magnetometry, electrical transport measurements, soft X-ray magnetic circular dichroism (SXMCD), XAS and optical magnetic circular dichroism, and was supported by first-principles calculations. SXMCD and XAS measurements revealed a 90 per cent contribution to FM from the Ti ions, and a 10 per cent contribution from the O ions. RBS/channelling measurements show complete Ta substitution in the Ti sites, though carrier activation was only 50 per cent at 5 per cent Ta concentration, implying compensation by cationic defects. The role of the Ti vacancy (V(Ti)) and Ti(3+) was studied via XAS and X-ray photoemission spectroscopy, respectively. It was found that, in films with strong FM, the V(Ti) signal was strong while the Ti(3+) signal was absent. We propose (in the absence of any obvious exchange mechanisms) that the localized magnetic moments, V(Ti) sites, are ferromagnetically ordered by itinerant carriers. Cationic-defect-induced magnetism is an alternative route to FM in wide-band-gap semiconducting oxides without any magnetic elements.

Influence of the narrow {111} planes on axial and planar ion channeling.

We report channeling patterns where clearly resolved effects of the narrow {111} planes are observed in axial and planar alignments for 2 MeV protons passing through a 55 nm [001] silicon membrane. At certain axes, such as <213> and <314>, the offset in atomic rows forming the narrow {111} planes results in shielding from the large potential at the wide {111} planes, producing a region of shallow, asymmetric potential from which axial channeling patterns have no plane of symmetry. At small tilts from such axes, different behavior is observed from the wide and narrow {111} planes. At planar alignment, distinctive channeling effects due to the narrow planes are observed. As a consequence of the shallow potential well at the narrow planes, incident protons suffer dechanneled trajectories which are excluded from channeling within the wide planes, resulting in an anomalously large scattered beam at {111} alignment.

Detection of microscopic particles present as contaminants in latent fingerprints by means of synchrotron radiation-based Fourier transform infra-red micro-imaging.

Synchrotron radiation-based Fourier transform infra-red (SR-FTIR) micro-imaging has been developed as a rapid, direct and non-destructive technique. This method, taking advantage of the high brightness and small effective source size of synchrotron light, is capable of exploring the molecular chemistry within the microstructures of microscopic particles without their destruction at high spatial resolutions. This is in contrast to traditional "wet" chemical methods, which, during processing for analysis, often caused destruction of the original samples. In the present study, we demonstrate the potential of SR-FTIR micro-imaging as an effective way to accurately identify microscopic particles deposited within latent fingerprints. These particles are present from residual amounts of materials left on a person's fingers after handling such materials. Fingerprints contaminated with various types of powders, creams, medications and high explosive materials (3-nitrooxy-2,2-bis(nitrooxymethyl)propyl nitrate (PETN), 1,3,5-trinitro-1,3,5-triazinane (RDX), 2-methyl-1,3,5-trinitrobenzene (TNT)) deposited on various - daily used - substrates have been analysed herein without any further sample preparation. A non-destructive method for the transfer of contaminated fingerprints from hard-to-reach areas of the substrates to the place of analysis is also presented. This method could have a significant impact on forensic science and could dramatically enhance the amount of information that can be obtained from the study of fingerprints.