Light losses from scattering in luminescent solar concentrator waveguides.

The reductions in the transmission of emission originating from a fluorophore dissolved in a polymer matrix due to light scattering were compared in two forms of planar waveguides used as luminescent solar concentrators: a thin film of poly(methylmethacrylate) (PMMA) spin-coated on a glass plate and a solid PMMA plate of the same dimensions. The losses attributable to light scattering encountered in the waveguide consisting of the thin film of polymer coated on a glass plate were not detectable within experimental uncertainty, whereas the losses in the solid polymer plate were significant. The losses in the solid plate are interpreted as arising from light-scattering centers comprising minute bubbles of vapor/gas, incomplete polymerization or water clusters that are introduced during or after the thermally induced polymerization process.

The photophysics of phenylenevinylene oligomers and self-absorption of their fluorescence in polymer films.

The fluorescence spectra, quantum yields and lifetimes of a series of alkoxy-substituted phenylenevinylene molecules, which serve as short chain oligomer models for poly(p-phenylenevinylene), have been determined in fluid solvents and in a high viscosity polymer matrix. The effects of solvent polarity and a high viscosity molecular environment on the fluorescence yields and spectral shapes have been established. Alkoxy group substitution on the phenyl ring moieties of the molecules has an important effect on the vibronic structures and profiles of the absorption spectra. This was interpreted in terms of hot-band, ground to excited singlet state transitions from energetically closely-spaced torsional vibrational levels of the vinylene double bond in the ground state. The shapes of the absorption bands affect the overlaps of the absorption and fluorescence spectra. This has been quantified as the probability of fluorescence reabsorption in solid polymer films as a function of pathlength. This is an important determinant of the efficacies of these compounds for "harvesting" solar energy in luminescent solar concentrator systems. The reabsorption probabilities of these compounds are lower for all pathlengths than those determined in the same polymer film for the fluorophores, perylene and perylene diimide, which have been considered for concentrating spatially diffuse sunlight.

In vitro growth and differentiation of primary myoblasts on thiophene based conducting polymers.

Polythiophenes are attractive candidate polymers for use in synthetic cell scaffolds as they are amenable to modification of functional groups as a means by which to increase biocompatibility. In the current study we analysed the physical properties and response of primary myoblasts to three thiophene polymers synthesized from either a basic bithiophene monomer or from one of two different thiophene monomers with alkoxy functional groups. In addition, the effect of the dopants pTS- and ClO4 - was investigated. In general, it was found that pTS- doped polymers were significantly smoother and tended to be more hydrophilic than their ClO4 - doped counterparts, demonstrating that the choice of dopant significantly affects the polythiophene physical properties. These properties had a significant effect on the response of primary myoblasts to the polymer surfaces; LDH activity measured from cells harvested at 24 and 48 h post-seeding revealed significant differences between numbers of cells attaching to the different thiophene polymers, whilst all of the polymers equally supported cell doubling over the 48 h period. Differences in morphology were also observed, with reduced cell spreading observed on polymers with alkoxy groups. In addition, significant differences were seen in the polymers' ability to support myoblast fusion. In general pTS- doped polymers were better able to support fusion than their ClO4 - doped counterparts. These studies demonstrate that modification of thiophene polymers can be used to promote specific cellular response (e.g. proliferation over differentiation) without the use of biological agents.