Untargeted metabolomics analysis of Ralstonia eutropha during plant oil cultivations reveals the presence of a fucose salvage pathway.

Process engineering of biotechnological productions can benefit greatly from comprehensive analysis of microbial physiology and metabolism. Ralstonia eutropha (syn. Cupriavidus necator) is one of the best studied organisms for the synthesis of biodegradable polyhydroxyalkanoate (PHA). A comprehensive metabolomic study during bioreactor cultivations with the wild-type (H16) and an engineered (Re2058/pCB113) R. eutropha strain for short- and or medium-chain-length PHA synthesis has been carried out. PHA production from plant oil was triggered through nitrogen limitation. Sample quenching allowed to conserve the metabolic states of the cells for subsequent untargeted metabolomic analysis, which consisted of GC-MS and LC-MS analysis. Multivariate data analysis resulted in identification of significant changes in concentrations of oxidative stress-related metabolites and a subsequent accumulation of antioxidative compounds. Moreover, metabolites involved in the de novo synthesis of GDP-L-fucose as well as the fucose salvage pathway were identified. The related formation of fucose-containing exopolysaccharides potentially supports the emulsion-based growth of R. eutropha on plant oils.

Enhanced isobutanol production by co-production of polyhydroxybutyrate and cofactor engineering.

Once cells have been used to produce biochemicals, there are only a few effective ways to utilize the residual cell mass, even though the utilization of leftover cells would aid in decreasing production costs. Here, a polyhydroxybutyrate (PHB) and isobutanol co-production system was designed to address this challenge. The addition of the PHB operon into Escherichia coli conferred a metabolic advantage for alcohol production, generating 1.14-fold more isobutanol. Furthermore, following nitrogen source optimization and cofactor engineering, the engineered E. coli strain produced 2-fold more isobutanol and 0.25 g/L PHB. Moreover, E. coli cells showed higher tolerance to isobutanol with the overexpression of PHB biosynthesis genes. This co-production system resulted in an increased biomass, higher glucose utilization, and lower acetate maintenance, leading to higher productivity regarding PHB and isobutanol yield. Thus, this novel system is applicable to future fermentation studies for the co-production of PHB and isobutanol.

Mechanical and biological properties of chitin/polylactide (PLA)/hydroxyapatite (HAP) composites cast using ionic liquid solutions.

This research investigates the potential development of lobster shell waste-derived chitin reinforced with poly(lactic acid) (PLA) and nano-hydroxyapatite (nHAP) into new materials with potentially superior mechanical and thermal properties for biomedical applications. The ionic liquid 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) was used as a solvent to prepare chitin/PLA/nHAP composites. The effect of variation of the polymer concentrations on the conduct of the resulting composite was explored. The detailed physico-mechanical, thermal and surface morphology properties were evaluated with different thermal and optical characterization techniques. When the concentration of PLA in the composite was increased from 20 to 80 wt%, the tensile strength improved by ~77% while the elongation at break and the toughness of the material decreased significantly. The addition of hydroxyapatite was observed to improve strength of the composites up to 140% with an increase in elongation at break up to 465%. Cell growth study show that the composite materials support the growth and proliferation of Ocy 454 osteocyte cells. The materials were shown to have no effect on osteocyte gene expression, as well as minimal cytotoxicity and biodegradability. These results reveal that the biocomposites would be suitable candidates for use in bone regeneration that are not exposed to excessive forces.

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) terpolymer production from volatile fatty acids using engineered Ralstonia eutropha.

One of the advantages of microbial synthesis of polyhydroxyalkanoates (PHAs) is the production of diverse polymers with different properties by the addition of different monomers, such as 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 3-hydroxyhexanoate (3HHx). Considering the number of possible variables, terpolymers can have more variations than copolymers. In this study, we aimed to synthesize the terpolymer P(3HB-co-3HV-co-3HHx) from volatile fatty acids such as propionate and butyrate using the recombinant Ralstonia eutropha strain (Re2133/pCB81), containing deletions in the phaB1, phaB2, and phaB3 genes, and overexpression of synthetic PHA operon (phaC2, phaA, phaJ). This strain produced terpolymers depending on the ratio of two different carbon sources, namely, propionic and butyric acids; however, wild type R. eutropha could not produce the same type of polymer. The incorporation of 3-hydroxyvalerate and 3-hydroxyhexanoate monomers was confirmed by gas chromatography and H-nuclear magnetic resonance spectroscopy, and the parameters affecting the terpolymer composition were obtained based on regression. In addition, the thermal analysis showed that this terpolymer has properties different from those of the copolymer, obtained from the same composition of volatile acids. Depending on the ratio of two volatile acids, the composition of the terpolymer can be regulated resulting in different properties.

Common Metrics for Impairment Ratings.

Impairment reflects a "a significant deviation, loss, or loss of use of any body structure or body function in an individual with a health condition, disorder, or disease" and is not synonymous with disability, which refers to "activity limitations and/or participation restrictions in an individual with a health condition, disorder, or disease." The American Medical Association Guides to the Evaluation of Permanent Impairment are the most widely used standard to assess impairment. Future research could use empirical evidence on the relationship between impairment ratings and earnings losses to improve the ability of the Guides to predict the economic consequences of a disabling injury.

Discarded Egg Yolk as an Alternate Source of Poly(3-Hydroxybutyrate-co-3-hydroxyhexanoate).

Many poultry eggs are discarded worldwide because of infection (i.e., avian flu) or presence of high levels of pesticides. The possibility of adopting egg yolk as a source material to produce polyhydroxyalkanoate (PHA) biopolymer was examined in this study. Cupriavidus necator Re2133/pCB81 was used for the production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) or poly(3HHx), a polymer that would normally require long-chain fatty acids as carbon feedstocks for the incorporation of 3HHx monomers. The optimal medium contained 5% egg yolk oil and ammonium nitrate as a nitrogen source, with a carbon/nitrogen (C/N) ratio of 20. Time course monitoring using the optimized medium was conducted for 5 days. Biomass production was 13.1 g/l, with 43.7% co-polymer content. Comparison with other studies using plant oils and the current study using egg yolk oil revealed similar polymer yields. Thus, discarded egg yolks could be a potential source of PHA.

Draft Genome Sequence of Halomonas sp. Strain SL1, a Putative Polyhydroxyalkanoate-Producing Halophile.

Halomonas sp. strain SL1, a halophilic gammaproteobacterium, was isolated from samples from the Great Salt Lake in Utah. We report here the draft genome sequence of SL1, which has an estimated total sequence length of 3.6 Mb.

Perspectives for the biotechnological production of biofuels from CO2 and H2 using Ralstonia eutropha and other 'Knallgas' bacteria.

With global CO2 emissions at their highest in several years, mitigation and possibly reduction of greenhouse gas buildup and concomitant production of renewable fuel molecules for growing transportation fuel needs are urgent challenges for renewable energy scientists and engineers. Knallgas bacteria provide a biocatalyst platform for utilization of CO2 and production of diverse and some high-energy density biofuel molecules, requisite for drop-in transportation fuels. The most well-studied Knallgas bacterium, Ralstonia eutropha, has been engineered to produce n-butanol, isobutanol, and terpene molecules under chemolithoautotrophic conditions. There are other representatives of this group of bacteria that potentially have the capabilities for CO2-based fuel molecule synthesis. In principle, fermentative production of biofuel from CO2 could rival the "power-to-gas" (non-biological production of fuels using CO2 and H2) production methods. However, challenges remain for both methods in order to compete with currently priced petroleum-based fuels. With continued streamlining of processes and attention to Industrial Ecology principles, biofuel synthesis by Knallgas bacteria could represent a viable part of a nation's energy portfolio.

Enhanced microbial lipid production by Cryptococcus albidus in the high-cell-density continuous cultivation with membrane cell recycling and two-stage nutrient limitation.

As a potential feedstock for biofuel production, a high-cell-density continuous culture for the lipid production by Cryptococcus albidus was investigated in this study. The influences of dilution rates in the single-stage continuous cultures were explored first. To reach a high-cell-density culture, a single-stage continuous culture coupled with a membrane cell recycling system was carried out at a constant dilution rate of 0.36/h with varied bleeding ratios. The maximum lipid productivity of 0.69 g/L/h was achieved with the highest bleeding ratio of 0.4. To reach a better lipid yield and content, a two-stage continuous cultivation was performed by adjusting the C/N ratio in two different stages. Finally, a lipid yield of 0.32 g/g and lipid content of 56.4% were obtained. This two-stage continuous cultivation, which provided a higher lipid production performance, shows a great potential for an industrial-scale biotechnological production of microbial lipids and biofuel production.

Fabrication of porous chitin membrane using ionic liquid and subsequent characterization and modelling studies.

The application of green chemistry principles for the processing of biopolymers is a steadily increasing field of research. Chitin membranes were successfully prepared by using the ionic liquid 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) as solvent media. The resulting materials were thoroughly characterized, revealing that freeze drying produced membranes that were highly porous. The drying methods and the concentration of chitin used defined many of the membrane properties, such as mechanical strength, porosity, and water absorbency. From these data, an empirical model was generated which could be used to correlate the different membrane properties. The model could be used to predict the properties of the chitin membrane made with different wt% of chitin-IL solutions, and the predicted values aligned with the experimental results. This allowed for prediction of the properties of the chitin membrane (e.g., tensile strength) and gives the ability to tune the properties of the biomaterial. The methods and structures described here provide a starting point for the design and fabrication of a family of polysaccharide-based sustainable materials with potentially broad applicability.

Solvent production by engineered Ralstonia eutropha: channeling carbon to biofuel.

Microbial production of solvents like acetone and butanol was a couple of the first industrial fermentation processes to gain global importance. These solvents are important feedstocks for the chemical and biofuel industry. Ralstonia eutropha is a facultatively chemolithoautotrophic bacterium able to grow with organic substrates or H2 and CO2 under aerobic conditions. This bacterium is a natural producer of polyhydroxyalkanoate biopolymers. Recently, with the advances in the development of genetic engineering tools, the range of metabolites R. eutropha can produce has enlarged. Its ability to utilize various carbon sources renders it an interesting candidate host for synthesis of renewable biofuel and solvent production. This review focuses on progress in metabolic engineering of R. eutropha for the production of alcohols, terpenes, methyl ketones, and alka(e)nes using various resources. Biological synthesis of solvents still presents the challenge of high production costs and competition from chemical synthesis. Better understanding of R. eutropha biology will support efforts to engineer and develop superior microbial strains for solvent production. Continued research on multiple fronts is required to engineer R. eutropha for truly sustainable and economical solvent production.

Engineered Probiotic for the Inhibition of Salmonella via Tetrathionate-Induced Production of Microcin H47.

Complications arising from antibiotic-resistant bacteria are becoming one of the key issues in modern medicine. Members of drug-resistant Enterobacteriaceae spp. include opportunistic pathogens (e.g., Salmonella spp.) that are among the leading causes of morbidity and mortality worldwide. Overgrowth of these bacteria is considered a hallmark of intestinal dysbiosis. Microcins (small antimicrobial peptides) produced by some gut commensals can potentially cure these conditions by inhibiting these pathogens and have been proposed as a viable alternative to antibiotic treatment. In this proof-of-concept work, we leverage this idea to develop a genetically engineered prototype probiotic to inhibit Salmonella spp. upon exposure to tetrathionate, a molecule produced in the inflamed gut during the course of Salmonella infection. We developed a plasmid-based system capable of conferring the ability to detect and utilize tetrathionate, while at the same time producing microcin H47. We transferred this plasmid-based system to Escherichia coli and demonstrated the ability of the engineered strain to inhibit growth of Salmonella in anaerobic conditions while in the presence of tetrathionate, with no detectable inhibition in the absence of tetrathionate. In direct competition assays between the engineered E. coli and Salmonella, the engineered E. coli had a considerable increase in fitness advantage in the presence of 1 mM tetrathionate as compared to the absence of tetrathionate. In this work, we have demonstrated the ability to engineer a strain of E. coli capable of using an environmental signal indicative of intestinal inflammation as an inducing molecule, resulting in production of a microcin capable of inhibiting the organism responsible for the inflammation.

Absence of ppGpp Leads to Increased Mobilization of Intermediately Accumulated Poly(3-Hydroxybutyrate) in Ralstonia eutropha H16.

In this study, we constructed a set of Ralstonia eutropha H16 strains with single, double, or triple deletions of the (p)ppGpp synthase/hydrolase (spoT1), (p)ppGpp synthase (spoT2), and/or polyhydroxybutyrate (PHB) depolymerase (phaZa1 or phaZa3) gene, and we determined the impact on the levels of (p)ppGpp and on accumulated PHB. Mutants with deletions of both the spoT1 and spoT2 genes were unable to synthesize detectable amounts of (p)ppGpp and accumulated only minor amounts of PHB, due to PhaZa1-mediated depolymerization of PHB. In contrast, unusually high levels of PHB were found in strains in which the (p)ppGpp concentration was increased by the overexpression of (p)ppGpp synthase (SpoT2) and the absence of (p)ppGpp hydrolase. Determination of (p)ppGpp levels in wild-type R. eutropha under different growth conditions and induction of the stringent response by amino acid analogs showed that the concentrations of (p)ppGpp during the growth phase determine the amount of PHB remaining in later growth phases by influencing the efficiency of the PHB mobilization system in stationary growth. The data reported for a previously constructed ΔspoT2 strain (C. J. Brigham, D. R. Speth, C. Rha, and A. J. Sinskey, Appl Environ Microbiol 78:8033-8044, 2012, https://doi.org/10.1128/AEM.01693-12) were identified as due to an experimental error in strain construction, and our results are in contrast to the previous indication that the spoT2 gene product is essential for PHB accumulation in R. eutrophaIMPORTANCE Polyhydroxybutyrate (PHB) is an important intracellular carbon and energy storage compound in many prokaryotes and helps cells survive periods of starvation and other stress conditions. Research activities in several laboratories over the past 3 decades have shown that both PHB synthase and PHB depolymerase are constitutively expressed in most PHB-accumulating bacteria, such as Ralstonia eutropha This implies that PHB synthase and depolymerase activities must be well regulated in order to avoid a futile cycle of simultaneous PHB synthesis and PHB degradation (mobilization). Previous reports suggested that the stringent response in Rhizobium etli and R. eutropha is involved in the regulation of PHB metabolism. However, the levels of (p)ppGpp and the influence of those levels on PHB accumulation and PHB mobilization have not yet been determined for any PHB-accumulating species. In this study, we optimized a (p)ppGpp extraction procedure and a high-performance liquid chromatography-mass spectrometry (HPLC-MS)-based detection method for the quantification of (p)ppGpp in R. eutropha This enabled us to study the relationship between the concentrations of (p)ppGpp and the accumulated levels of PHB in the wild type and in several constructed mutant strains. We show that overproduction of the alarmone (p)ppGpp correlated with reduced growth and massive overproduction of PHB. In contrast, in the absence of (p)ppGpp, mobilization of PHB was dramatically enhanced.

Application of acetyl-CoA acetyltransferase (AtoAD) in Escherichia coli to increase 3-hydroxyvalerate fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate).

Polyhydroxyalkanoate (PHA) is a family of biodegradable polymers, and incorporation of different monomers can alter its physical properties. To produce the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) containing a high level of 3-hydroxyvalerate (3HV) by altering acetyl-CoA pool levels, we overexpressed an acetyl-CoA acetyltransferase (atoAD) in an engineered E. coli strain, YH090, carrying PHA synthetic genes bktB, phaB, and phaC. It was found that, with introduction of atoAD and with propionate as a co-substrate, 3HV fraction in PHA was increased up to 7.3-fold higher than a strain without atoAD expressed in trans (67.9 mol%). By the analysis of CoA pool concentrations in vivo and in vitro using HPLC and LC-MS, overexpression of AtoAD was shown to decrease the amount of acetyl-CoA and increase the propionyl-CoA/acetyl-CoA ratio, ultimately resulting in an increased 3HV fraction in PHA. Finally, synthesis of P(3HB-co-3HV) containing 57.9 mol% of 3HV was achieved by fed-batch fermentation of YJ101 with propionate.

Experimental evolution and gene knockout studies reveal AcrA-mediated isobutanol tolerance in Ralstonia eutropha.

Isobutanol (IBT) has attracted much attention from researchers as a next generation drop-in biofuel. Ralstonia eutropha is a gram-negative bacterium which naturally produces polyhydroxybutyrate (PHB), and has been reported to produce IBT after metabolic engineering. Similar to other microbes, R. eutropha experiences toxicity from branched-chain alcohols and is unable to grow in the presence of IBT concentrations higher than 0.5% (v v(-1)). Such low tolerance greatly limits the ability of R. eutropha to grow and produce IBT. In order to study toxicity to the cells, IBT-tolerant strains were developed by experimental evolution, revealing that two genes, previously described as being related to IBT tolerance in Escherichia coli (acrA and acrA6), also presented mutations in R. eutropha evolved strains. The effect on the physiology of the cells of in-frame deletions of each of these genes was assessed in wild type and engineered IBT-producing strains in an attempt to reproduce a tolerant phenotype. The mutant strains' ability to tolerate, consume, and produce IBT were also analyzed. Although deletions of acrA6 and acrA did not significantly improve R. eutropha growth in the presence of IBT, these deletions improved cell survival in the presence of high concentrations of IBT in the extracellular milieu. Moreover, an in-frame acrA deletion in an engineered IBT-producing R. eutropha enhanced the strain's ability to produce IBT, which could potentially be associated with enhanced survival at high IBT concentrations.

Polyhydroxyalkanoates production with Ralstonia eutropha from low quality waste animal fats.

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyesters considered as alternatives to petroleum-based plastics. Ralstonia eutropha is a model organism for PHA production. Utilizing industrially rendered waste animal fats as inexpensive carbon feedstocks for PHA production is demonstrated here. An emulsification strategy, without any mechanical or chemical pre-treatment, was developed to increase the bioavailability of solid, poorly-consumable fats. Wild type R. eutropha strain H16 produced 79-82% (w/w) polyhydroxybutyrate (PHB) per cell dry weight (CDW) when cultivated on various fats. A productivity of 0.3g PHB/(L × h) with a total PHB production of 24 g/L was achieved using tallow as carbon source. Using a recombinant strain of R. eutropha that produces poly(hydroxybutyrate-co-hydroxyhexanoate) [P(HB-co-HHx)], 49-72% (w/w) of PHA per CDW with a HHx content of 16-27 mol% were produced in shaking flask experiments. The recombinant strain was grown on waste animal fat of the lowest quality available at lab fermenter scale, resulting in 45 g/L CDW with 60% (w/w) PHA per CDW and a productivity of 0.4 g PHA/(L × h). The final HHx content of the polymer was 19 mol%. The use of low quality waste animal fats as an inexpensive carbon feedstock exhibits a high potential to accelerate the commercialization of PHAs.

Draft Genome Sequence of Ralstonia sp. MD27, a Poly(3-Hydroxybutyrate)-Degrading Bacterium, Isolated from Compost.

Ralstonia sp. strain MD27, a novel biopolymer-degrading betaproteobacterium, was isolated from compost samples. This organism has been shown to utilize the biopolymer poly(3-hydroxybutyrate) [P(3HB)] as a carbon source for growth. We report the draft genome sequence of MD27 with an estimated total sequence length of 5.9 Mb.