Luminescent lanthanide mixed N-phthaloylglycinate and terephthalate coordination polymers: Structural and optical properties.

A new class of lanthanide mixed-carboxylate ligands compounds with formula {[Ln2 (phthgly)4 (bdc)(H2 O)6 ]·(H2 O)4 }∞ , labelled as Ln3+ : Eu (1) and Gd (2) coordination polymers (CP) were synthesized under mild reaction conditions between lanthanide nitrate salts and a solution of N-phthaloylglycine (phthgly) and terephthalic (bdc) ligands. The (1) and (2) coordination polymers were formed by symmetric binuclear units, in which phthgly and bdc carboxylate ligands are coordinated to the lanthanide ions by different coordination modes. Surprisingly, all organic ligands participate in hydrogen bonding interactions, forming an extremally rigid crystalline structure. The red narrow emission bands from the 5 D0 →7 FJ transitions of the Eu3+ ion show a high colour purity. The intramolecular energy transfer process from L→Eu3+ ion has been discussed. The experimental intensity parameters (Ω2,4 ) reflect lower angular distortion and polarizability of the chemical environment around the metal ion compared with other Eu3+ compounds reported in the literature. This novel class of coordination polymer offers a more attractive platform for developing luminescent functional materials for different applications.

Colloidal Quantum Dots as an Emerging Vast Platform and Versatile Sensitizer for Singlet Molecular Oxygen Generation.

Singlet molecular oxygen (1O2) has been reported in wide arrays of applications ranging from optoelectronic to photooxygenation reactions and therapy in biomedical proposals. It is also considered a major determinant of photodynamic therapy (PDT) efficacy. Since the direct excitation from the triplet ground state (3O2) of oxygen to the singlet excited state 1O2 is spin forbidden; therefore, a rational design and development of heterogeneous sensitizers is remarkably important for the efficient production of 1O2. For this purpose, quantum dots (QDs) have emerged as versatile candidates either by acting individually as sensitizers for 1O2 generation or by working in conjunction with other inorganic materials or organic sensitizers by providing them a vast platform. Thus, conjoining the photophysical properties of QDs with other materials, e.g., coupling/combining with other inorganic materials, doping with the transition metal ions or lanthanide ions, and conjugation with a molecular sensitizer provide the opportunity to achieve high-efficiency quantum yields of 1O2 which is not possible with either component separately. Hence, the current review has been focused on the recent advances made in the semiconductor QDs, perovskite QDs, and transition metal dichalcogenide QD-sensitized 1O2 generation in the context of ongoing and previously published research work (over the past eight years, from 2015 to 2023).

Strategy to Probe the Local Atomic Structure of Luminescent Rare Earth Complexes by X-ray Absorption Near-Edge Spectroscopy Simulation Using a Machine Learning-Based PyFitIt Approach.

Rare earth(III) ß-diketonates are highly remarkable luminophores in the visible spectral region among the rare earth compounds, owing to the efficient contribution from the 4f-4f intraconfigurational transitions. To get detailed structural insight into the RE3+ sites (RE = Eu, Gd, and Sm), X-ray absorption near-edge spectroscopy (XANES) can be very potent in probing the local chemical environment around the RE3+ ion. In this work, a PyFitIt machine learning approach was employed as a new strategy to simulate the Eu, Gd, and Sm L3-edge XANES and thereby determine the local atomic structure of the luminescence RE3+ ß-diketonate complexes, [Eu(tta)3(H2O)2], [C4mim][Eu(dbm)4], [Gd(tta)3(H2O)2], and [Sm(dbm)3(phen)] (tta, 3-thenoyltrifluoroacetonate; dbm, dibenzoylmethane; phen, phenanthroline; and C4mim, 1-butyl-3-methylimidazolium bromide). Continuous Cauchy wavelet transform validated the PyFitIt calculated XANES by visualizing very efficiently the coordination geometries, composed of O and O/N backscatterers around the RE3+ (RE = Eu and Gd) and Sm3+ ions, respectively, as a pinkish-red color map in the two-dimensional images of the corresponding complexes. Extended X-ray absorption fine structure fit in Artemis also corroborated the three-dimensional structures generated by PyFitIt XANES simulation for all the compounds. Though, relatively slightly higher bond distance values for the Sm3+ complex are due to the higher atomic radius of the Sm3+ ion when compared to the Eu3+ and Gd3+ complexes. Meanwhile, higher Debye-Waller factor (σ2) values for the [C4mim][Eu(dbm)4] when compared to the [Eu(tta)3(H2O)2] indicated the structure disorder, owing to the distortion in the local geometry. It is noteworthy that the optical properties, described mainly by the Ωλ (λ = 2 and 4) 4f-4f intensity parameters, are very sensitive to the local coordination environment around the Eu3+ ion. Thus, a close agreement between the experimental and theoretically calculated Ωλ parameter values confirmed that the PyFitIt calculated square antiprismatic structures are precisely similar to the real structures of the Eu3+ complexes.

Enhancing the Luminescence of Eu(III) Complexes with the Ruthenocene Organometallic Unit as Ancillary Ligand.

Five novel Eu(III)-ß-diketonate complexes containing ruthenocene ancillary ligands (1,1'-bis(diphenylphosphoryl)ruthenocene─RcBPO) were synthesized and characterized. The coordination compounds presented the general formula [Eu(ß-dik)3(RcBPO)], where ß-dik stands for 2-thenoyltrifluoroacetonate (tta), 3-benzoyl-1,1,1-trifluoroacetone (btf), 2-dibenzoylmethanate (dbm), 2-acetyl-1,3-indandionate (aind), and 2-benzoyl-1,3-indandionate (bind), and RcBPO stands for 1,1'-bis(diphenylphosphoryl)ruthenocene. The [Eu(aind)3(RcBPO)] complex crystallizes in a monoclinic Cc non-centrosymmetric space group with the europium site environment, assuming a bicapped trigonal prism coordination polyhedron with the symmetry point group close to C2v. Photoluminescent properties for the solid-state samples were described in terms of excitation, emission, lifetime decay curves, and intrinsic and overall quantum yields. The replacement of the two coordinated H2O molecules by the RcBPO ancillary ligand leads to great enhancements of the overall quantum yields (QEuL), with the minimum increment by a factor of 5 for the case of [Eu(btf)3(RcBPO)] and the maximum enhancement of 270 times for the case of the [Eu(dbm)3(RcBPO)] complex. In addition, theoretical calculations were carried out to model the spectroscopic properties of the investigated compounds. To obtain theoretical Judd-Ofelt parameters (Ωλ, λ = 2, 4, and 6) and intramolecular energy transfer rates, the JOYSpectra web platform was employed using the structure obtained from density functional theory calculations. Hence, a rate equation model provided theoretical overall quantum yields, which are in great agreement with measured data.

Luminescence properties of the Ln-EDTA complexes covalently linked to the chitosan biopolymers containing ß-diketonate as antenna ligands.

This paper reports on the preparation, characterization, and photoluminescence properties of novel hybrid materials, in which the EDTA-Ln-L complexes (where L: H2 O, acac, bzac, dbm, and tta ligands, and Ln: Eu, Gd, and Tb) were covalently linked to the precursor medium molecular weight chitosan surface (CS) matrices or on the chitosan surfaces previously crosslinked with epichlorohydrin (CSech). The emission spectra of these materials were characterized by intraconfigurational-4fN transitions centred on the Eu3+ and Tb3+ ions. Some broad bands from the polymeric matrix were also observed in the emission spectra, however the relative intensities of the intraconfigurational bands increased significantly for systems containing diketonate ligands when the antenna effect became more efficient. The values of the radiative rates (Arad ) were higher for crosslinked hybrid systems with epichlorohydrin, while nonradiative rates (Anrad ) presented the opposite behaviour. These data contributed to an increase in the values of emission quantum efficiency (η) for crosslinked materials. The effect of the modification process and antenna ligand on the values of intensities, intensity parameters Ω2 e Ω4 of the Eu3+ complexes were also investigated. The results showed that the crosslinked biopolymer surfaces have great potential for applications in molecular devices light converters.

Orange-Emitting ZnSe: Mn2+ quantum dots as nanoprobes for macrophages

The biocompatibility, bionanointeraction, uptake efficiency, and entry pathway of luminescent nanomaterials are the key factors to understand development of an efficient bionanoprobe. The foremost objective of this work is to explore the potential of 3-mercaptopropionic acid (3-MPA) capped ZnSe:xMn2+ (x = 5, 10, and 15 mol %) quantum dots (QDs) for the development of bionanoprobe used in future biological and clinical applications. For this purpose, highly intense orange-emitting activator Mn2+ ion doped ZnSe QDs were synthesized via a high-temperature organometallic method and rendered water-soluble by a ligand exchange approach. The morphological and physicochemical characterizations displayed the ultrasmall zinc-blend cubic crystal structure of QDs with an elliptical shape nanocrystals and average diameter of 4 nm. The luminescent nanomaterials exhibited orange emission centered at 584 nm under excitation at 385 nm. The biocompatibility, time-dependent cellular uptake, and the uptake mechanism of QDs were studied in RAW 264.7 macrophages, accomplished by various cytotoxicity assays, CytoViva hyperspectral enhanced dark-field and dual-mode fluorescence (DMF) microscopy, and transmission electron microscopy (TEM) images. The cytotoxicity study did not confirm any noticeable deleterious effect of QDs within incubation for 6 h. The fluorescence images of cells incubated with QDs showed efficient emission, which is a manifestation that QDs are photochemically stable in the intracellular environment. The cellular uptake findings demonstrated that the QDs were predominantly internalized via clathrin- and caveolae-mediated pathways. After the uptake, QDs aggregates appeared inside the vesicles in the cytoplasm, and their number and size gradually increased as a function of time. Nevertheless, the fluorescent QDs presented remarkable colloidal stability in various media, biocompatibility within the designated time, efficient time-dependent uptake, and distinct entry pathway in RAW macrophages, suggesting promising candidates to explore for the development of future bionanoprobes.

Odd-Even Effect on Luminescence Properties of Europium Aliphatic Dicarboxylate Complexes.

The odd-even effect in luminescent [Eu2 (L)3 (H2 O)x ]⋅y(H2 O) complexes with aliphatic dicarboxylate ligands (L: OXA, MAL, SUC, GLU, ADP, PIM, SUB, AZL, SEB, UND, and DOD, where x=2-6 and y=0-4), prepared by the precipitation method, was observed for the first time in lanthanide compounds. The final dehydration temperatures of the Eu3+ complexes show a zigzag pattern as a function of the carbon chain length of the dicarboxylate ligands, leading to the so-called odd-even effect. The FTIR data confirm the ligand-metal coordination via the mixed mode of bridge-chelate coordination, except for the Eu3+ -oxalate complex. XRD results indicate that the highly crystalline materials belong to the monoclinic system. The odd-even effect on the 4 f-4 f luminescence intensity parameters (Ω2 and Ω4 ) is explained by using an extension of the dynamic coupling mechanism, herein named the ghost-atom model. In this method, the long-range polarizabilities ( α* ) were simulated by a ghost atom located at the middle of each ligand chain. The values of α* were estimated using the localized molecular orbital approach. The emission intrinsic quantum yield ( QLnLn ) of the Eu3+ complexes also presented an the odd-even effect, successfully explained in terms of the zigzag behavior shown by the Ω2 and Ω4 intensity parameters. Luminescence quenching due to water molecules in the first coordination sphere is also discussed and rationalized.

Red- and green-emitting nano-clay materials doped with Eu3+ and/or Tb3.

Trivalent europium (Eu3+ ) and terbium (Tb3+ ) ions are important activator centers used in different host lattices to produce red and green emitting materials. The current work shows the design of new clay minerals to act as host lattices for rare earth (RE) ions. Based on the hectorite structure, nano-chlorohectorites and nano-fluorohectorites were developed by replacing the OH- present in the hectorite structure with Cl- or F- , thus avoiding the luminescence quenching expected due to the OH- groups. The produced matrices were characterized through X-ray powder diffraction (XPD), transmission electron microscopy (TEM), FT-IR, 29 Si MAS (magic angle spinning) NMR, nitrogen sorption, thermogravimetry-differential scanning calorimetry (TGA-DSC) and luminescence measurements, indicating all good features expected from a host lattice for RE ions. The nano-clay materials were successfully doped with Eu3+ and/or Tb3+ to yield materials preserving the hectorite crystal structure and showing the related luminescence emissions. Thus, the present work shows that efficient RE3+ luminescence can be obtained from clays without the use of organic 'antenna' molecules.

Fast, low-cost preparation of hackmanite minerals with reversible photochromic behavior using a microwave-assisted structure-conversion method.

A microwave-assisted structure-conversion (MASC) method was used to obtain photochromic hackmanites (M,Na)8Al6Si6O24(Cl,S)2 (M: Li, Na, and K) in a fast (12 to 20 min) one-step process. Structural conversion from Zeolite A to hackmanite minerals has been proven to be very effective through an aluminosilicate crystalline intermediate. Photochromism is observed with both UV and X-ray (CuKα) excitation.

Hierarchical self-supported ZnAlEu LDH nanotubes hosting luminescent CdTe quantum dots.

Self-supported oligo-layered ZnAlEu LDH nanotubes (∅ 20 nm) self-assemble upon controlled hydrolysis of the metal ions (Zn2+, Al3+, Eu3+) in the presence of 1,3,5-benzenetricarboxylate anions and non-ionic worm-like micelles. Their high surface area and easily accessible cylindrical mesopores (175 m2 g-1; 0.75 cm3 g-1) facilitate interaction with 5 nm CdTe quantum dots, enhancing the overall luminescence behavior.

Rapid and Energy-Saving Microwave-Assisted Solid-State Synthesis of Pr(3+)-, Eu(3+)-, or Tb(3+)-Doped Lu2O3 Persistent Luminescence Materials.

Persistent luminescence materials Lu2O3:R(3+),M (Pr,Hf(IV); Eu; or Tb,Ca(2+)) were successfully and rapidly (22 min) prepared by microwave-assisted solid-state synthesis (MASS) using a carbon microwave susceptor and H3BO3 as flux. Reaction times are reduced by up to 93% over previous synthetic methods, without special gases application and using a domestic microwave oven. All materials prepared with H3BO3 flux exhibit LuBO3 impurities that were quantified by Rietveld refinement from synchrotron radiation X-ray powder diffraction patterns. The flux does not considerably affect the crystalline structure of the C-Lu2O3, however. Scanning electron micrographs suggest low surface area when H3BO3 flux is used in the materials' synthesis, decreasing the amount of surface hydroxyl groups in Lu2O3 and improving the luminescence intensity of the phosphors. The carbon used as the susceptor generates CO gas, leading to complete reduction of Tb(IV) to Tb(3+) and partial conversion of Pr(IV) to Pr(3+) present in the Tb4O7 and Pr6O11 precursors, as indicated by X-ray absorption near-edge structure data. Persistent luminescence spectra of the materials show the red/near-IR, reddish orange, and green emission colors assigned to the 4f(n) → 4f(n) transitions characteristics of Pr(3+), Eu(3+), and Tb(3+) ions, respectively. Differences between the UV-excited and persistent luminescence spectra can be explained by the preferential persistent luminescence emission of R(3+) ion in the S6 site rather than R(3+) in the C2 site. In addition, inclusion of Hf(IV) and Ca(2+) codopants in the Lu2O3 host increases the emission intensity and duration of persistent luminescence due to generation of traps caused by charge compensation in the lattice. Photonic materials prepared by MASS with H3BO3 flux show higher persistent luminescence performance than those prepared by the ceramic method or MASS without flux. Color tuning of persistent luminescence in Lu2O3:R(3+),M provides potential applications in bioimaging as well as in solar cell sensitizers.

Highly-sensitive Eu(3+) ratiometric thermometers based on excited state absorption with predictable calibration.

Temperature measurements ranging from a few degrees to a few hundreds of Kelvin are of great interest in the fields of nanomedicine and nanotechnology. Here, we report a new ratiometric luminescent thermometer using thermally excited state absorption of the Eu(3+) ion. The thermometer is based on the simple Eu(3+) energy level structure and can operate between 180 and 323 K with a relative sensitivity ranging from 0.7 to 1.7% K(-1). The thermometric parameter is defined as the ratio between the emission intensities of the (5)D0 → (7)F4 transition when the (5)D0 emitting level is excited through the (7)F2 (physiological range) or (7)F1 (down to 180 K) level. Nano and microcrystals of Y2O3:Eu(3+) were chosen as a proof of concept of the operational principles in which both excitation and detection are within the first biological transparent window. A novel and of paramount importance aspect is that the calibration factor can be calculated from the Eu(3+) emission spectrum avoiding the need for new calibration procedures whenever the thermometer operates in different media.

Red-green emitting and superparamagnetic nanomarkers containing Fe3O4 functionalized with calixarene and rare earth complexes.

The design of bifunctional magnetic luminescent nanomaterials containing Fe3O4 functionalized with rare earth ion complexes of calixarene and ß-diketonate ligands is reported. Their preparation is accessible through a facile one-pot method. These novel Fe3O4@calix-Eu(TTA) (TTA = thenoyltrifluoroacetonate) and Fe3O4@calix-Tb(ACAC) (ACAC = acetylacetonate) magnetic luminescent nanomaterials show interesting superparamagnetic and photonic properties. The magnetic properties (M-H and ZFC/FC measurements) at temperatures of 5 and 300 K were explored to investigate the extent of coating and the crystallinity effect on the saturation magnetization values and blocking temperatures. Even though magnetite is a strong luminescence quencher, the coating of the Fe3O4 nanoparticles with synthetically functionalized rare earth complexes has overcome this difficulty. The intramolecular energy transfer from the T1 excited triplet states of TTA and ACAC ligands to the emitting levels of Eu(3+) and Tb(3+) in the nanomaterials and emission efficiencies are presented and discussed, as well as the structural conclusions from the values of the 4f-4f intensity parameters in the case of the Eu(3+) ion. These novel nanomaterials may act as the emitting layer for the red and green light for magnetic light-converting molecular devices (MLCMDs).

Synthesis, crystal structure and luminescence properties of the Ln(III)-picrate complexes with 1-ethyl-3-methylimidazolium as countercations.

New anionic complexes of lanthanide picrates containing 1-ethyl-3-methylimidazolium (EMIm) as countercation have been prepared. The Ln(III) complexes were characterized by complexometric titration, elemental analyses, infrared spectroscopy and molar conductivity. The molecular structures of the (EMIm)2[Ln(Pic)4(H2O)2]Pic complexes, Ln(III)=Sm, Eu, Gd and Tb, and Pic=picrate, were determined by X-ray crystallography. In these structures the picrate anion appears in three forms: as uncoordinated counteranion, as monodentated and bidentate ligand. The coordination polyhedron around the Ln(III) atom can be described as tricapped trigonal prismatic molecular geometry. The theoretical molecular structures of the complexes were also calculated using the Sparkle/PM3 model for Ln(III) complexes, allowing analysis of intramolecular energy transfer processes of the Eu(III) compound. The spectroscopic properties of the 4f(6) intraconfigurational transitions of the Eu(III) complex were then studied experimentally and theoretically. The low value of emission quantum efficiency of (5)D0 emitting level (η) of Eu(III) ion (ca. 10%) is due to the vibrational modes of the water molecule that act as luminescence quenching. In addition, the luminescence decay curves, the experimental intensity parameters (Ωλ), lifetimes (τ), radiative (Arad) and non-radiative (Anrad) decay rates, theoretical quantum yield (q) were also determined and discussed.

Luminescent material based on the [Eu(TTA)3(H2O)2] complex incorporated into modified silica particles for biological applications.

Amino-functionalized luminescent silica particles were investigated for use in immunoassays. The particles were prepared by the Stöber method where the [Eu(TTA)3(H2O)2] complex (TTA: 3-thenoyltrifluoroacetonate) was incorporated into silica particles during the hydrolysis and condensation of TEOS: tetraethylorthosilicate. Then, the amino groups were introduced in the particle surface using APTS: 3-aminopropyltriethoxisilane. The resulting particles were characterized by scanning electron microscopy (SEM), X ray diffraction (XRD) and photoluminescence spectroscopy. In order to demonstrate the viability of the use of luminescent particles as optical markers, an enzyme-substrate reaction was performed using HRP: horseradish peroxidase. It was possible to verify the binding of HRP-oxidized LDL (low density lipoprotein) and anti-oxLDL antibody-luminescent silica particles through the evaluation of the presence of HRP. The bioassay data open a broad field for the development of protein-tagged luminescent particles for use in biomedical sciences.

Synthesis and characterization of the europium(III) pentakis(picrate) complexes with imidazolium countercations: structural and photoluminescence study.

Six new lanthanide complexes of stoichiometric formula (C)(2)[Ln(Pic)(5)]--where (C) is a imidazolium cation coming from the ionic liquids 1-butyl-3-methylimidazolium picrate (BMIm-Pic), 1-butyl-3-ethylimidazolium picrate (BEIm-Pic), and 1,3-dibutylimidazolium picrate (BBIm-Pic), and Ln is Eu(III) or Gd(III) ions--have been prepared and characterized. To the best of our knowledge, these are the first cases of Ln(III) pentakis(picrate) complexes. The crystal structures of (BEIm)(2)[Eu(Pic)(5)] and (BBIm)(2)[Eu(Pic)(5)] compounds were determined by single-crystal X-ray diffraction. The [Eu(Pic)(5)](2-) polyhedra have nine oxygen atoms coordinated to the Eu(III) ion, four oxygen atoms from bidentate picrate, and one oxygen atom from monodentate picrate. The structures of the Eu complexes were also calculated using the sparkle model for lanthanide complexes, allowing an analysis of intramolecular energy transfer processes in the coordination compounds. The photoluminescence properties of the Eu(III) complexes were then studied experimentally and theoretically, leading to a rationalization of their emission quantum yields.

Photoluminescence of europium(III) dithiocarbamate complexes: electronic structure, charge transfer and energy transfer.

For the first time, we observed photoluminescence in Eu(III) dithiocarbamate complexes at room temperature -- more specifically in [Eu(Et(2)NCS(2))(3)phen], [Eu(Et(2)NCS(2))(3)bpy] and the novel [Eu(Ph(2)NCS(2))(3)phen], where phen stands for 1,10-phenanthroline and bpy for 2,2'-bipyridine. Correlations between the electronic structure of the dithiocarbamate ligands on one hand, and covalency, intensity, and ligand field spectroscopic parameters on the other, could be established. Moreover, the relative values of the emission quantum efficiencies obtained for these complexes, as well as their dependence with temperature, could be satisfactorily described by a theoretical methodology recently developed.

Steady-state luminescence investigation of the binding of Eu(III) and Tb(III) ions with synthetic peptides derived from plant thionins.

This work reports Eu(III) and Tb(III) luminescence titrations in which the lanthanide ions were used as spectroscopic probes for Ca(II) ions to determine the metal binding ability of Ac-NESVKEEGGW-NH(2) and Ac-NESVKEDGGW-NH(2). These decapeptides correspond to the putative calcium binding region of the plant antifungal proteins SI-alpha1 from Sorghum bicolor and of Zeathionin from Zea mays, respectively. The luminescence spectra for the Eu(III)-decapeptide system (red emission) with the excitation at the Trp band at 280 nm showed an enhancement of the intensities of the 5D(0)-->7F(J) transitions (where J=0-4) with increments of Eu(III) ion concentration. The photoluminescence titration data of the terbium ion (green emission) in the decapeptide solutions showed intensification of the 5D(4)-->7F(J) transitions (J=0-6), similar to that observed for the Eu(III) ion. Thus, energy transfer from Ac-NESVKEEGGW-NH(2) and Ac-NESVKEDGGW-NH(2) to the trivalent lanthanide ions revealed that these peptides are capable of binding to these metal ions with association constants of the order of 10(5) M(-1). The amino acid derivative Ac-Trp-OEt also transferred energy to Tb(III) and Eu(III) ions as judged from the quenching of tryptophan luminescence. However, the energy transfers were significantly lower. Taken together the luminescence titration data indicated that Ac-NESVKEEGGW-NH(2) and Ac-NESVKEDGGW-NH(2) bind efficiently to both trivalent lanthanide ions and that these ions may be used as probes to distinguish an anionic peptide from a neutral amino acid derivative.

Synthesis and photophysical study of highly luminescent coordination compounds of rare earth ions with thenoyltrifluoroacetonate and AZT.

This work presents the study of the interaction between zidovudine (AZT) and rare earth (RE) ions with thenoyltrifluoroacetonate (TTA). The complexes [RE(TTA)(3) x (AZT)(2)] (where RE(III)=Eu and Gd) were prepared by reaction between the [RE(TTA)(3) x (H(2)O)(2)] precursors and AZT dissolved in acetone in the molar ratio 1:2. The obtained luminescent materials were characterized by microanalyses (C, H, N), complexometric titration, IR spectroscopy, X-ray powder diffraction and thermal analysis (DSC and TG/DTG). The luminescence data indicate that the substitution of the two water molecules by AZT in the europium complex causes an intensification of luminescence corresponding to the (5)D(0) -->(7)F(J) (J=0-4) transitions associated with one of the site symmetries. Based on the luminescence spectrum of the Eu(III)-compound the Omega(lambda) experimental intensity parameters (lambda=2 and 4) were calculated for the electronic transitions (5)D(0)-->(7)F(2, 4). The Omega(2) intensity parameter for this new compound is higher than for the precursor compound, suggesting an effective interaction between the AZT and the chemical environment of the Eu(III) ion. Luminescence data confirm that the AZT complex and precursor compound have a comparable emission quantum efficiency.