Rapid, Selective Heavy Metal Removal from Water by a Metal-Organic Framework/Polydopamine Composite.

Drinking water contamination with heavy metals, particularly lead, is a persistent problem worldwide with grave public health consequences. Existing purification methods often cannot address this problem quickly and economically. Here we report a cheap, water stable metal-organic framework/polymer composite, Fe-BTC/PDA, that exhibits rapid, selective removal of large quantities of heavy metals, such as Pb2+ and Hg2+, from real world water samples. In this work, Fe-BTC is treated with dopamine, which undergoes a spontaneous polymerization to polydopamine (PDA) within its pores via the Fe3+ open metal sites. The PDA, pinned on the internal MOF surface, gains extrinsic porosity, resulting in a composite that binds up to 1634 mg of Hg2+ and 394 mg of Pb2+ per gram of composite and removes more than 99.8% of these ions from a 1 ppm solution, yielding drinkable levels in seconds. Further, the composite properties are well-maintained in river and seawater samples spiked with only trace amounts of lead, illustrating unprecedented selectivity. Remarkably, no significant uptake of competing metal ions is observed even when interferents, such as Na+, are present at concentrations up to 14 000 times that of Pb2+. The material is further shown to be resistant to fouling when tested in high concentrations of common organic interferents, like humic acid, and is fully regenerable over many cycles.

Understanding Small-Molecule Interactions in Metal-Organic Frameworks: Coupling Experiment with Theory.

Metal-organic frameworks (MOFs) have gained much attention as next-generation porous media for various applications, especially gas separation/storage, and catalysis. New MOFs are regularly reported; however, to develop better materials in a timely manner for specific applications, the interactions between guest molecules and the internal surface of the framework must first be understood. A combined experimental and theoretical approach is presented, which proves essential for the elucidation of small-molecule interactions in a model MOF system known as M2 (dobdc) (dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate; M = Mg, Mn, Fe, Co, Ni, Cu, or Zn), a material whose adsorption properties can be readily tuned via chemical substitution. It is additionally shown that the study of extensive families like this one can provide a platform to test the efficacy and accuracy of developing computational methodologies in slightly varying chemical environments, a task that is necessary for their evolution into viable, robust tools for screening large numbers of materials.

Porous, conductive metal-triazolates and their structural elucidation by the charge-flipping method.

A new family of porous crystals was prepared by combining 1H-1,2,3-triazole and divalent metal ions (Mg, Mn, Fe, Co, Cu, and Zn) to give six isostructural metal-triazolates (termed MET-1 to 6). These materials are prepared as microcrystalline powders, which give intense X-ray diffraction lines. Without previous knowledge of the expected structure, it was possible to apply the newly developed charge-flipping method to solve the complex crystal structure of METs: all the metal ions are octahedrally coordinated to the nitrogen atoms of triazolate such that five metal centers are joined through bridging triazolate ions to form super-tetrahedral units that lie at the vertexes of a diamond-type structure. The variation in the size of metal ions across the series provides for precise control of pore apertures to a fraction of an Angstrom in the range 4.5 to 6.1 Å. MET frameworks have permanent porosity and display surface areas as high as some of the most porous zeolites, with one member of this family, MET-3, exhibiting significant electrical conductivity.

A multiunit catalyst with synergistic stability and reactivity: a polyoxometalate-metal organic framework for aerobic decontamination.

A combination of polyanion size and charge allows the Keggin-type polyoxometalate (POM), [CuPW(11)O(39)](5-), a catalyst for some air-based organic oxidations, to fit snuggly in the pores of MOF-199 (HKUST-1), a metal-organic framework (MOF) with the POM countercations residing in alternative pores. This close matching of POM diameter and MOF pore size in this POM-MOF material, [Cu(3)(C(9)H(3)O(6))(2)](4)[{(CH(3))(4)N}(4)CuPW(11)O(39)H] (1), results in a substantial synergistic stabilization of both the MOF and the POM. In addition, this heretofore undocumented POM-MOF interaction results in a dramatic increase in the catalytic turnover rate of the POM for air-based oxidations. While 1 catalyzes the rapid chemo- and shape-selective oxidation of thiols to disulfides and, more significantly, the rapid and sustained removal of toxic H(2)S via H(2)S + 1/2 O(2) → 1/8 S(8) + H(2)O (4000 turnovers in <20 h), the POM or the MOF alone is catalytically slow or inactive. Three arguments are consistent with the catalytic reactions taking place inside the pores. POM activation by encapsulation in the MOF likely involves electrostatic interactions between the two components resulting in a higher reduction potential of the POM.

Direct assignment of the relative configuration in acyclic 1,3-diols by 1H NMR spectroscopy.

[chemical reaction: see text]. Using an operationally simple deuterium isotopic perturbation method, the relative configuration of 1,3-diols can be determined directly using 1H NMR spectroscopy. A comparison of the OH chemical shifts for OH/OH and OH/OD isotopomers provides a reliable assessment of the relative configuration of the diol; anti-1,3-diols within polyacetate and polypropionate frameworks have upfield isotope shifts of 2-16 ppb, whereas syn-1,3-diols show upfield isotope shifts of 20-33 ppb.