SWATH-MS as a strategy for CHO host cell protein identification and quantification supporting the characterization of mAb purification platforms.

Host cell proteins (HCPs) are process-related impurities expressed by the host cells during biotherapeutics' manufacturing, such as monoclonal antibodies (mAbs). Some challenging HCPs evade clearance during the downstream processing and can be co-purified with the molecule of interest, which may impact product stability, efficacy, and safety. Therefore, HCP content is a critical quality attribute to monitor and quantify across the bioprocess. Here we explored a mass spectrometry (MS)-based proteomics tool, the sequential window acquisition of all theoretical fragment-ion spectra (SWATH) strategy, as an orthogonal method to traditional ELISA. The SWATH workflow was applied for high-throughput individual HCP identification and quantification, supporting characterization of a mAb purification platform. The design space of HCP clearance of two polishing resins was evaluated through a design of experiment study. Absolute quantification of high-risk HCPs was achieved (reaching 1.8 and 4.2 ppm limits of quantification, for HCP A and B respectively) using HCP-specific synthetic heavy labeled peptide calibration curves. Profiling of other HCPs was also possible using an average calibration curve (using labeled peptides from different HCPs). The SWATH approach is a powerful tool for HCP assessment during bioprocess development enabling simultaneous monitoring and quantification of different individual HCPs and improving process understanding of their clearance.

Process development and characterization for integrated continuous bioprocesses-Highlights from N-mAb.

The N-mAb case study was produced by the National Institute for Innovation in Manufacturing Biopharmaceuticals (NIIMBL) to support teaching and learning for both industry and to accelerate adoption of advanced manufacturing process technologies such as integrated continuous bioprocesses (ICB) for mAbs. Similar to the A-mAb case study, N-mAb presents the evolution of an integrated control strategy, from early clinical through process validation and commercial manufacturing with a focus on elements that are unique to integrated continuous bioprocesses. This publication presents a summary of the process design and characterization chapters to allow a greater focus on the unique elements relevant to that phase of development.

Fully automated minicolumn chromatography.

Miniaturized chromatography columns (minicolumns) operated by automated liquid handlers are an integral part of bioprocess purification development. However, these systems can be limited in both their efficiency and accessibility. Because the minicolumn chromatography operation itself is higher throughput, the lower throughput pre- and post-operation activities become the bottleneck of the workflow. Additionally, method writing and operation of the systems while varying multiple parameters, using a design of experiments approach for example, can be error-prone and resource intensive. Here, we have developed a fully automated minicolumn chromatography system to both address these bottlenecks and improve the accessibility of these systems by allowing users to enter chromatography-relevant information through a simplified user interface. Methods have been developed to automate buffer preparation and protein solution titration leveraging modeling and integrated pH probes with feedback control. Chromatogram generation and fraction pooling has additionally been automated to improve the efficiency of post-chromatography operations. We have also demonstrated the flexibility of the system through an example run where both bind-and-elute chromatography and flowthrough chromatography experiments were performed in parallel. Additionally, all methodology and parameters to operate the system have been shared. We hope this will help interested parties improve the efficiency and accessibility of their minicolumn chromatography systems.

Pilot-scale demonstration of an end-to-end integrated and continuous biomanufacturing process.

There has been increasing momentum recently in the biopharmaceutical industry to transition from traditional batch processes to next-generation integrated and continuous biomanufacturing. This transition from batch to continuous is expected to offer several advantages which, taken together, could significantly improve access to biologics drugs for patients. Despite this recent momentum, there has not been a commercial implementation of a continuous bioprocess reported in the literature. In this study, we describe a successful pilot-scale proof-of-concept demonstration of an end-to-end integrated and continuous bioprocess for the production of a monoclonal antibody (mAb). This process incorporated all of the key unit operations found in a typical mAb production process, including the final steps of virus removal filtration, ultrafiltration, diafiltration, and formulation. The end-to-end integrated process was operated for a total of 25 days and produced a total of 4.9 kg (200 g/day or 2 g/L BRX/day) of the drug substance from a 100-L perfusion bioreactor (BRX) with acceptable product quality and minimal operator intervention. This successful proof-of-concept demonstrates that end-to-end integrated continuous bioprocessing is achievable with current technologies and represents an important step toward the realization of a commercial integrated and continuous bioprocessing process.

Gamma irradiating chromatography columns enables bioburden-free integrated continuous biomanufacturing.

An important consideration for integrated continuous biomanufacturing is that the downstream chromatography steps integrated with the bioreactor should maintain a low bioburden state throughout the entire duration of the operation. One potential strategy to achieve this is to start bioburden-free and functionally close the chromatography system. While chromatography skids themselves can be rendered bioburden-free, limitations exist in applying these methods to chromatography columns. The small column sizes used in continuous multicolumn chromatography enable gamma irradiation of disposable columns to render them bioburden-free. However, this approach has not been widely implemented, likely because gamma irradiation can negatively impact resin performance. Here, several protective mobile-phase modifiers were screened and shown to help chromatography resins retain naïve-like performance. Gamma irradiated columns were then integrated into perfusion bioreactors for continuous capture. Successful integrated continuous capture downstream of perfusion bioreactors for greater than 40 days using protein A, custom affinity, and non-affinity capture resins for multiple biologic modalities is demonstrated in development and commercial settings. No indications of time-based performance decline or bioburden growth have been observed. This strategy enables bioburden-free integrated continuous biomanufacturing operations and could allow full process closure and decreased environmental control requirements for facilities; thus, permitting simultaneous multi-product operations in a ballroom arrangement.

Perfusion Cell Culture Decreases Process and Product Heterogeneity in a Head-to-Head Comparison With Fed-Batch.

In this study, the authors compared the impacts of fed-batch and perfusion platforms on process and product attributes for IgG1- and IgG4-producing cell lines. A "plug-and-play" approach is applied to both platforms at bench scale, using commercially available basal and feed media, a standard feed strategy for fed-batch and ATF filtration for perfusion. Product concentration in fed-batch is 2.5 times greater than perfusion, while average productivity in perfusion is 7.5 times greater than fed-batch. PCA reveals more variability in the cell environment and metabolism during the fed-batch run. LDH measurements show that exposure of product to cell lysate is 7-10 times greater in fed-batch. Product analysis shows larger abundances of neutral species in perfusion, likely due to decreased bioreactor residence times and extracellular exposure. The IgG1 perfusion product also has higher purity and lower half-antibody. Glycosylation is similar across both culture modes. The first perfusion harvest slice for both product types shows different glycosylation than subsequent harvests, suggesting that product quality lags behind metabolism. In conclusion, process and product data indicate that intra-lot heterogeneity is decreased in perfusion cultures. Additional data and discussion is required to understand the developmental, clinical and commercial implications, and in what situations increased uniformity would be beneficial.

Single-step affinity purification of enzyme biotherapeutics: a platform methodology for accelerated process development.

Downstream sample purification for quality attribute analysis is a significant bottleneck in process development for non-antibody biologics. Multi-step chromatography process train purifications are typically required prior to many critical analytical tests. This prerequisite leads to limited throughput, long lead times to obtain purified product, and significant resource requirements. In this work, immunoaffinity purification technology has been leveraged to achieve single-step affinity purification of two different enzyme biotherapeutics (Fabrazyme® [agalsidase beta] and Enzyme 2) with polyclonal and monoclonal antibodies, respectively, as ligands. Target molecules were rapidly isolated from cell culture harvest in sufficient purity to enable analysis of critical quality attributes (CQAs). Most importantly, this is the first study that demonstrates the application of predictive analytics techniques to predict critical quality attributes of a commercial biologic. The data obtained using the affinity columns were used to generate appropriate models to predict quality attributes that would be obtained after traditional multi-step purification trains. These models empower process development decision-making with drug substance-equivalent product quality information without generation of actual drug substance. Optimization was performed to ensure maximum target recovery and minimal target protein degradation. The methodologies developed for Fabrazyme were successfully reapplied for Enzyme 2, indicating platform opportunities. The impact of the technology is significant, including reductions in time and personnel requirements, rapid product purification, and substantially increased throughput. Applications are discussed, including upstream and downstream process development support to achieve the principles of Quality by Design (QbD) as well as integration with bioprocesses as a process analytical technology (PAT).

Periodic counter-current chromatography -- design and operational considerations for integrated and continuous purification of proteins.

Integrated and continuous processing of recombinant proteins offers several advantages over batch or semi-batch processing used traditionally in the biotechnology industry. This paper presents a theoretical and practical approach for designing a periodic counter-current chromatography (PCC) operation as a continuous capture purification step that is integrated with a perfusion cell culture process. The constraints for continuous and optimal PCC operation govern the selection of residence time and number of columns. The flexibility available in PCC design for selection of these parameters is dictated by the binding characteristics of the target protein on the capture resin. Using an empirical model for the protein breakthrough curve, analytical solutions to determine these conditions were derived and verified with experimental results for three different proteins: two relatively unstable proteins (recombinant enzymes) and a relatively stable protein (monoclonal antibody). The advantages of a continuous downstream capture step are highlighted for the three case studies in comparison with the existing batch chromatography processes. The use of PCC leads to improvements in process economics due to higher resin capacity utilization and correspondingly lower buffer consumption. Furthermore, integrated and continuous bioprocessing results in a smaller facility footprint by elimination of harvest hold vessels and clarification, as well as by reducing the capture column size by one to two orders of magnitude.

Integrated continuous production of recombinant therapeutic proteins.

In the current environment of diverse product pipelines, rapidly fluctuating market demands and growing competition from biosimilars, biotechnology companies are increasingly driven to develop innovative solutions for highly flexible and cost-effective manufacturing. To address these challenging demands, integrated continuous processing, comprised of high-density perfusion cell culture and a directly coupled continuous capture step, can be used as a universal biomanufacturing platform. This study reports the first successful demonstration of the integration of a perfusion bioreactor and a four-column periodic counter-current chromatography (PCC) system for the continuous capture of candidate protein therapeutics. Two examples are presented: (1) a monoclonal antibody (model of a stable protein) and (2) a recombinant human enzyme (model of a highly complex, less stable protein). In both cases, high-density perfusion CHO cell cultures were operated at a quasi-steady state of 50-60 × 10(6) cells/mL for more than 60 days, achieving volumetric productivities much higher than current perfusion or fed-batch processes. The directly integrated and automated PCC system ran uninterrupted for 30 days without indications of time-based performance decline. The product quality observed for the continuous capture process was comparable to that for a batch-column operation. Furthermore, the integration of perfusion cell culture and PCC led to a dramatic decrease in the equipment footprint and elimination of several non-value-added unit operations, such as clarification and intermediate hold steps. These findings demonstrate the potential of integrated continuous bioprocessing as a universal platform for the manufacture of various kinds of therapeutic proteins.