RESUMO
Barium sulfate, BaSO4, is shown by Raman microscopy to be readily identifiable in early (1920s) industrially produced anatase (TiO2) and thus, if present, may act as a date marker for early industrial anatase. Later processes (except that for producing Titanox B) did not involve usage of barium sulfate. The matter is relevant to the possible dating of certain artwork.
Assuntos
Arte/história , Sulfato de Bário/análise , Corantes/análise , Titânio/análise , Sulfato de Bário/história , Corantes/história , História do Século XX , Análise Espectral Raman , Titânio/históriaRESUMO
High-throughput continuous hydrothermal flow synthesis has been used as a rapid and efficient synthetic route to produce a range of crystalline nanopowders in the Ce-Zn oxide binary system. High-resolution powder X-ray diffraction data were obtained for both as-prepared and heat-treated (850 degrees C for 10 h in air) samples using the new robotic beamline I11, located at Diamond Light Source. The influence of the sample composition on the crystal structure and on the optical and physical properties was studied. All the nanomaterials were characterized using Raman spectroscopy, UV-visible spectrophotometry, Brunauer-Emmett-Teller surface area and elemental analysis (via energy-dispersive X-ray spectroscopy). Initially, for 'as-prepared' Ce(1-x)Zn(x)O(y), a phase-pure cerium oxide (fluorite) structure was obtained for nominal values of x=0.1 and 0.2. Biphasic mixtures were obtained for nominal values of x in the range of 0.3-0.9 (inclusive). High-resolution transmission electron microscopy images revealed that the phase-pure nano-CeO(2) (x=0) consisted of ca 3.7 nm well-defined nanoparticles. The nanomaterials produced herein generally had high surface areas (greater than 150 m(2) g(-1)) and possessed combinations of particle properties (e.g. bandgap, crystallinity, size, etc.) that were unobtainable or difficult to achieve by other more conventional synthetic methods.
RESUMO
A novel and rapid and continuous hydrothermal route to the synthesis of extensive ultra-thin 2D sodium titanate (Na(2)Ti(3)O(7)) nano-sheets using a superheated water flow at 450 degrees C and 24.1 MPa as a crystallizing medium is described. High resolution electron microscopy of the sheets revealed that they were a few layers thick and largely uncurled, highly crystalline despite their very short time under hydrothermal flow conditions. The sodium titanate sheets possessed excellent photocatalytic activity for decolourisation of methylene blue dye.