Correction: On the mercuration, palladation, transmetalation and direct auration of a C

Correction for 'On the mercuration, palladation, transmetalation and direct auration of a C^N^C pincer ligand' by Alice Jane McEllin et al., Dalton Trans., 2023, 52, 872-876, https://doi.org/10.1039/d2dt04114f.

Gold(III), Mercury(II), and Palladium(II) Complexes of a Series of Isomeric Bis(mono- and dialkoxyphenyl)pyridines: Introduction of Gold through Transmetalation and Catalysis.

A series of isomeric bis-2,6-(monoalkoxyphenyl)pyridine and bis-2,6-(dialkoxyphenyl)pyridine ligands were synthesized and characterized. In order to prepare their chlorogold(III) complexes, intermediate chloromercury(II) complexes were first prepared, but unlike observations from previous studies where they were obtained impure and at best in moderate yield, here pure complexes were synthesized, many in rather high yields. Depending on the substitution pattern of the alkoxy chains on the ligands, mono- and/or dimercurated complexes were obtained, characterized by 1H, 13C{1H}, and 199Hg NMR spectroscopy as well as, in several cases, by X-ray crystallography. Factors that may explain this unusual reactivity are discussed. In most cases, transmetalation to the related chlorogold(III) complex proceeded smoothly, although lower yields were obtained when starting from doubly mercurated precursors. Prompted by the propensity of these ligands to mercurate, attempts were made to effect direct auration, but none was successful. However, dimeric, orthometalated complexes of palladium(II) could be prepared and were also amenable to transmetalation to the chlorogold(III) complex, providing for a mercury-free synthesis.

Liquid-crystalline circularly polarised fluorescent emitters with a high luminescence dissymmetry factor.

Chiral liquid-crystalline emitters based on 9,9-dimethyl-10-(4-(phenylsulfonyl)phenyl)-9,10-dihydroacridine and a functionalised binaphthol show smectic liquid crystal phases and circularly polarised blue fluorescence with a high luminescence dissymmetry factor |glum| of 0.13. Solution-processable organic light-emitting diodes (OLEDs) based on the enantiomers were explored.

Liquid-crystalline circularly polarised TADF emitters for high-efficiency, solution-processable organic light-emitting diodes.

Achieving a high emission efficiency and a large luminescence asymmetry factor (glum) in a single molecule exhibiting circularly polarised thermally activated delayed fluorescence (CP-TADF) remains a formidable challenge. In this work, a proof-of-concept, liquid-crystalline CP-TADF molecule is proposed to realise high glum by taking advantage of the order inherent in liquid crystals. Employing a chiral dinaphthol-based CP-TADF molecule as the emissive unit, a pair of liquid-crystalline CP-TADF molecules (R/S-4) is synthesised via the introduction of six mesogenic moieties. The enantiomers show intense emission at about 520 nm which has clear TADF and liquid-crystalline characteristics. Both enantiomers display symmetrical electronic circular dichroism (CD) and circular polarisation luminescence (CPL) signals as thin films. Impressively, relatively large glum values of 0.11 are realised for the films. Solution-processed devices were fabricated using R/S-4 as the dopants, with the TADF molecule CzAcSF as the sensitiser. The OLEDs so prepared show a very high maximum external quantum efficiency of 21.2%, revealing a novel strategy for realising large glum values in CP-TADF.

Understanding the Liquid Structure in Mixtures of Ionic Liquids with Semiperfluoroalkyl or Alkyl Chains.

By mixing ionic liquids (ILs), it is possible to fine-tune their bulk and interfacial structure. This alters their physical properties and solvation behavior and is a simple way to prepare a collection of ILs whose properties can be tuned to optimize a specific application. In this study, mixtures of perfluorinated and alkylated ILs have been prepared, and links between composition, properties, and nanostructure have been investigated. These different classes of ILs vary substantially in the flexibility and polarizability of their chains. Thus, a range of useful structural and physical property variations are accessible through mixing that will expand the library of IL mixtures available in an area that to this point has received relatively little attention. In the experiments presented herein, the physical properties and bulk structure of mixtures of 1-methyl-3-octylimidazolium bis(trifluoromethylsulfonyl)imide [C8MIM][Tf2N] and 1-(1H,1H,2H,2H-perfluorooctyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C8MIM-F13][Tf2N] have been prepared. The bulk liquid structure was investigated using a combination of small-angle X-ray and neutron scattering (SAXS and SANS, respectively) experiments in combination with atomistic molecular dynamics simulations and the measurement of density and viscosity. We observed that the addition of [C8MIM-F13][Tf2N] to [C8MIM][Tf2N] causes changes in the nanostructure of the IL mixtures that are dependent on composition so that variation in the characteristic short-range correlations is observed as a function of composition. Thus, while the length scales associated with the apolar regions (polar non-polar peak─PNPP) increase with the proportion of [C8MIM-F13][Tf2N] in the mixtures, perhaps surprisingly given the greater volume of the fluorocarbon chains, the length scale of the charge-ordering peak decreases. Interestingly, consideration of the contact peak shows that its origins are both in the direct anion···cation contact length scale and the nature (and hence volume) of the chains appended to the imidazolium cation.

Superthermal Al Atoms as a Reactive-Atom Probe of Fluorinated Surfaces.

We demonstrate a proof-of-concept of a new analytical technique to measure relative F atom exposure at the surfaces of fluorinated materials. The method is based on reactive-atom scattering (RAS) of Al atoms, produced by pulsed laser ablation of solid Al at 532 nm. The properties of the incident ground-state Al were characterized by laser-induced fluorescence (LIF); at typical ablation fluences, the speed distribution is approximately Maxwellian at ∼45000 K, with a most-probable kinetic energy of 187 kJ mol-1 and a mean of 560 kJ mol-1 When these Al atoms impact the surfaces of perfluorinated solids (poly(tetrafluorethylene), PTFE) or liquids (perfluoropolyether, PFPE), gas-phase AlF products are clearly detectable by LIF on the AlF A-X band. Quantitative AlF yields were compared for a small representative set of a widely studied family of ionic liquids based on the common 1-alkyl-3-methylimidazolium ([Cnmim]+) cation. Yields of (1.9 ± 0.2):1 were found from [C2mim][Tf2N] and [C8mim][Tf2N], containing the common fluorinated bis(trifluoromethylsulfonyl)imide anion ([Tf2N]-). This is in quantitative agreement with previous independent low-energy ion scattering (LEIS) measurements and consistent with other independent results indicating that the longer cationic alkyl chains cover a larger fraction of the liquid surface and hence reduce anion exposure. The expected null result was obtained for the ionic liquid [C2mim][EtSO4] which contains no fluorine. These results open the way for further characterization and the potential application of this new variant of the RAS-LIF method.

On the mercuration, palladation, transmetalation and direct auration of a C

The C^N^C ligand 2,6-bis(2,3-dialkoxyphenyl)pyridine forms dimercury and orthopalladated complexes, both of which may be transmetallated to gold(III) complexes; the gold complexes may also be formed directly in a Rh(III)-catalysed process, hence it is possible to circumvent the use of organomercury intermediates in the synthesis of this important class of compound.

Scaling a Behavioral Health Home Delivery Model to Special Populations.

The present project utilized a Learning Collaborative (LC) to disseminate the Behavioral Health Home Plus (BHHP) physical-behavioral health integration model to providers serving two behavioral health populations at risk for adverse health conditions: youth psychiatric residential treatment facilities (five sites) and adult opioid treatment providers (seven sites). Following the positive results of a randomized controlled trial utilizing an LC to implement two behavioral health home models in community mental health provider organizations serving adults with serious mental illness, Community Care Behavioral Health Organization facilitated integration of the models to scale health and wellness supports to additional behavioral health care delivery settings. This paper presents provider results focused on BHHP implementation training, LC implementation, physical health and wellness promotion within sites, and BHHP model sustainment plans. Provider self-reported data indicate that the LC approach is a successful tool for integrating and sustaining BHHP model components in routine care.

Construction and performance of OLED devices prepared from liquid-crystalline TADF materials.

The device performance is reported for three compounds which show both thermally activated delayed fluorescence and liquid crystallinity, and use the donor 3,6-bis(3,4-didodecyloxyphenyl)carbazole. Two of the compounds, whose photophysics were reported previously, are based on a terephthalonitrile acceptor. A third and new compound is based on an isophthalonitrile acceptor and shows a more temperature-accessible mesophase and enhanced solution emission quantum yield. Two of the compounds show device external quantum efficiencies of between 2-3% and exhibit very small efficiency roll off. The responses are evaluated in terms of the specific nature of the materials.

Synthesis, Mesomorphism, Photophysics, and Device Properties of Liquid-Crystalline Pincer Complexes of Gold(III) Containing Semiperfluorinated Chains.

Gold(III) complexes of C∧N∧C-coordinating 2,6-diphenylpyridine pincer ligands with arylacetylide co-ligands are known triplet emitters at room temperature. We have reported previously that by functionalizing both the pincer ligand and the phenylacetylene with alkoxy chains, liquid crystallinity may be induced, with the complexes showing columnar mesophases. We now report new derivatives in which the phenylacetylene incorporates one, two, or three 1H,1H,2H,2H-perfluoroalkyl chains. In terms of intermolecular interactions, solution 1H NMR experiments suggest that the semiperfluoroalkyl chains promote a parallel, head-to-head arrangement of neighboring molecules relative to one another, rather than the anti-parallel, head-to-tail orientation found for the all-hydrocarbon materials. In terms of the liquid crystal properties, the complexes show columnar phases, with the addition of the more rigid fluorocarbon chains leading to a stabilization of both the crystal and liquid crystal mesophases. Mesophase temperature ranges were also wider. Interestingly, the amphiphilic nature of these complexes is evident through the observation of a frustrated columnar nematic phase between a Colr and a Colh phase, an observation recently reported in detail for one compound (Liq. Cryst., 2022, doi: 10.1080/02678292.2021.1991017). While calculation shows that, despite the "electronic insulation" provided by the dimethylene spacer group in the semiperfluoroalkyl chains, a small hypsochromic shift in one component of the absorption band is anticipated, experimentally this effect is not observed in the overall absorption envelope. Complexes with substituents in the 3,3',4,4'-positions of the phenyl rings of the pincer ligand once more show higher-luminescence quantum yields than the analogues with substituents in the 4,4'-positions only, associated with the lower-energy-emissive state in the former. However, in contrast to the observations with all-hydrocarbon analogues, the luminescence quantum yield of the complexes with 3,3',4,4'-substitution on the pincer increases as the number of semiperfluoroalkyl chains on the phenylacetylide increases, from 20% (one chain) to 34% (three chains). External quantum efficiencies in fabricated OLED devices are, however, low, attributed to the poor dispersion in the host materials on account of the fluorinated chains.

Small-angle neutron scattering from mixtures of long- and short-chain 3-alkyl-1-methyl imidazolium bistriflimides.

The preparation of mixtures of ionic liquids (ILs) represents an attractive strategy to tune their properties, an important aspect of which is to understand how the structure of the bulk varies with composition. In this study, small-angle neutron scattering (SANS) was used to probe mixtures of methylimidazolium-based ionic liquids [Cnmim][Tf2N] with [C2mim][Tf2N]) (n = 4, 6, 8 and 10) and of [Cmmim][Tf2N] with [C12mim][Tf2N] (m = 2, 4, 6 and 8). Mixtures were prepared in both contrasts, which is to say that one component would be fully hydrogenated while the other was fully deuterated, and vice versa. Data were fitted using a range of appropriate models, of which the Teubner-Strey model provided most useful information and the pure materials showed a nascent Polar Non-polar Peak (PNPP) for n = 6, which became more evident as n increased. In the mixtures [Cnmim]x[C2mim]1-x[Tf2N], the PNPP was evident for n = 10 and 8, nascent for n = 6 and absent for n = 4, with percolation showing a very strong dependence on the chain length of the added IL, [Cnmim][Tf2N]. In contrast, while the ability of [C12mim][Tf2N] to form percolated structures was damped when mixed with [Cmmim][Tf2N], as m increased from 2 to 6, this effect was less strong. However, data obtained for mixtures of [C12mim][Tf2N] and [C8mim][Tf2N], both of which percolate as pure materials, did not fit easily in any of the models applied to the previous systems and gave results that depended on the contrast used. Complementary small-angle X-ray scattering (SAXS) data, however, showed the expected evolution and behaviour of the PNPP, COP and CP, revealing that the unexpected observations were due to an adventitious matching out of isotopic contrasts. As well as revealing details of the structures of these IL mixtures, the results also point to complementary strategies for generating bulk percolated structures as a function of cation chain length.

Liquid-Crystalline Thermally Activated Delayed Fluorescence: Design, Synthesis, and Application in Solution-Processed Organic Light-Emitting Diodes.

Realizing both high efficiency and liquid crystallinity in one molecule remains a challenge in thermally activated delayed fluorescence (TADF) emission. Herein, two isomeric compounds─m-DPSAc-LC and p-DPSAc-LC with different connection positions between donor and acceptor moieties─were synthesized and characterized. Diphenylsulfone (DPS) was used as the acceptor, acridine (Ac) was used as the donor, and biphenyl derivatives (LC) were employed as the mesogenic group. Both compounds showed a smectic mesophase evidenced by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and temperature-dependent small-angle X-ray scattering (SAXS). The compound p-DPSAc-LC clearly exhibited thermally activated delayed fluorescence due to the much more distorted geometry, whereas m-DPSAc-LC showed simple fluorescence. Compared to the parent TADF molecules without appended mesogenic groups (DPS-Ac), these liquid-crystalline emitters possessed higher hole mobilities and improved device performance. The OLEDs fabricated via solution processing using the liquid-crystalline compound p-DPSAc showed a maximum external quantum efficiency of ∼15% and as such is the first example of a liquid-crystalline TADF material in an OLED device.

Surface Structure of Alkyl/Fluoroalkylimidazolium Ionic-Liquid Mixtures.

The gas-liquid interface of ionic liquids (ILs) is critically important in many applications, for example, in supported IL phase (SILP) catalysis. Methods to investigate the interfacial structure in these systems will allow their performance to be improved in a rational way. In this study, reactive-atom scattering (RAS), surface tension measurements, and molecular dynamics (MD) simulations were used to study the vacuum interface of mixtures of partially fluorinated and normal alkyl ILs. The underlying aim was to understand whether fluorinated IL ions could be used as additives to modify the surface structure of one of the most widely used families of alkyl ILs. The series of ILs 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Cnmim][Tf2N]) with n = 4-12 were mixed with a fixed-length, semiperfluorinated analogue (1H,1H,2H,2H-perfluorooctyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C8mimF13][Tf2N]), forming [Cnmim](1-x)[C8mimF13]x[Tf2N] mixtures, where x is the bulk mole fraction of the fluorinated component. The RAS-LIF method combined O-atom projectiles with laser-induced fluorescence (LIF) detection of the product OH as a measure of surface exposure of the alkyl chains. For [C8mim](1-x)[C8mimF13]x[Tf2N] mixtures, RAS-LIF OH yields are below those expected from stoichiometry. There are quantitatively consistent negative deviations from linearity of the surface tension. Both results imply that the lower-surface-tension fluoroalkyl material dominates the surface. A similar deficit is found for alkyl chain lengths n = 4, 6, 8, and 12 and for all (nonzero) x investigated by RAS-LIF. Accessible-surface-area (ASA) analyses of the MD simulations for [Cnmim](1-x)[C8mimF13]x[Tf2N] mixtures qualitatively reproduce the same primary effect of fluoro-chain predominance of the surface over most of the range of n. However, there are significant quantitative discrepancies between MD ASA predictions and experiment relating to the strength of any n-dependence of the relative alkyl coverage at fixed x, and on the x-dependence at fixed n. These discrepancies are discussed in the context of detailed examinations of the surface structures predicted in the MD simulations. Potential explanations, beyond experimental artifacts, include inadequacies in the classical force fields used in the MD simulations or the inability of simple ASA algorithms to capture dynamical factors that influence RAS-LIF yields.

Liquid Crystals Based on the N-Phenylpyridinium Cation-Mesomorphism and the Effect of the Anion.

Families of symmetric, ionic, tetracatenar mesogens are described based on a rigid, N-phenylpyridinium core, prepared as their triflimide, octyl sulfate and dodecyl sulfate salts for a range of terminal chain lengths. The mesomorphism of the individual series is described before a comparison is drawn between the different families and then more broadly with (i) neutral tetracatenar materials and (ii) related bis(3,4-dialkoxystilbazole)silver(I) salts. For the octyl and dodecyl sulfates and the related triflates reported earlier, a SmA phase is seen at shorter chain lengths, giving way to a Colh phase as the terminal chain lengthens. For the alkyl sulfate salts, an intermediate cubic phase is also seen and the terminal chain length required to cause the change from lamellar to columnar mesophase depends on the anion. Furthermore, there is an unexpected and sometime very large mesophase stabilisation seen on entering the columnar phase. All of the triflimide salts show a rectangular columnar (ribbon) phase.

Ionic N-phenylpyridinium tetracatenar mesogens: competing driving forces in mesophase formation and unprecedented difference in phase stabilisation within a homologous series.

Ionic, tetracatenar liquid crystals containing an N-phenylpyridinum core are described; many of these compounds display a SmA phase, something extremely rare in tetracatenar materials. The competing forces driving mesophase formation lead to an unprecedented difference in phase stabilities for SmA and Colh phases.

Spatially resolved mapping of phase transitions in liquid-crystalline materials by X-ray birefringence imaging.

The X-ray Birefringence Imaging (XBI) technique, first reported in 2014, is a sensitive method for spatially resolved mapping of the local orientational properties of anisotropic materials. We report the first application of the XBI technique to characterize molecular orientational ordering in a liquid crystalline material, demonstrating significant potential for exploiting XBI measurements to advance structural understanding of liquid crystal phases.

Probing Conformational Heterogeneity at the Ionic Liquid-Vacuum Interface by Reactive-Atom Scattering.

The atomic-level description of liquid interfaces has lagged behind that of solid crystalline surfaces because existing experimental techniques have been limited in their capability to report molecular structure in a fluctuating liquid interfacial layer. We have moved toward a more detailed experimental description of the gas-liquid interface by studying the F-atom scattering dynamics on a common ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. When given contrast by deuterium labeling, the yield and dynamical behavior of reactively scattered HF isotopologues can resolve distinct signatures from the cation butyl, methyl, and ring groups, which help to quantify the relative populations of cation conformations at the liquid-vacuum interface. These results demonstrate the importance of molecular organization in driving site-specific reactions at the extreme outer regions of the gas-liquid interface.

Unexpected, photochemically induced activation of the tetrabutylammonium cation by hexachloroplatinate(iv).

A dinuclear, butadiene-bridged complex, trans-µ2:η2,η2-1,3-butadiene-bis(trichloroplatinate(ii)) (1) was unexpectedly obtained on photolysis of acetone solutions of (NBu4)2[PtCl6].

Sequential X-ray-Induced Single-Crystal to Single-Crystal Transformation followed by Topotactic Reduction in a Potassium Crown Ether Complex of Tetrachloroaurate(III).

During data collection, the unreported potassium crown ether salt [K(18-crown-6][AuCl4] undergoes a sequential X-ray-induced and irreversible single-crystal to single-crystal transformation from P1̅ to C2/ c followed by a topotactic reduction to crystalline [K(18-crown-6][AuCl2] within the same C2/ c space group.

Platinum-based metallomesogens bearing a Pt(4,6-dfppy)(acac) skeleton: synthesis, photophysical properties and polarised phosphorescence application.

Polarised phosphorescence has a bright future in backlighting for conventional liquid crystal displays due to its theoretical 100% internal quantum efficiency and low cost. However, there are scarce reports on polarised phosphorescence from metallomesogens. In this contribution, a platinum-based metallomesogen containing a mesogenic biphenyl (Pt1) was prepared and characterised. To further explore the effect of the substituent on mesophase and emission properties, a related complex Pt2 containing a tetraphenylethene (TPE) moiety was also synthesised. Both complexes melt at elevated temperatures but thereafter do not appear to crystallise on cooling. Complex Pt1 shows an enantiotropic nematic phase from which a broad emission can be seen when spread as a film; in solution, an intense, sky-blue emission is observed. For Pt2, which shows a monotropic SmA phase, the emission in the condensed phase is suppressed and there is only weak emission in solution. Polarisation-dependent photoluminescence with a polarised ratio of 5.4 was obtained for the aligned film of a Pt1:polyimide mixture. Using Pt1 as an emissive layer, non-doped, polarised organic light-emitting diodes presented a broad emission spectrum in the range of 450-900 nm with a polarised ratio of 1.33 and the highest external quantum efficiency of 1.1%. This research has an important significance for achieving broad-based polarised phosphorescence from platinum complex-based metallomesogens.