Effect of Photobiomodulation Combined with Physiotherapy on Functional Performance in Children with Myelomeningo-Cele-Randomized, Blind, Clinical Trial.

BACKGROUND: This study aimed to evaluate the electrical activity of the rectus femoris, tibialis anterior, and lateral gastrocnemius muscles during the sit-to-stand task and functional mobility after a neurofunctional physiotherapy protocol associated with PBM. METHODS: Twenty-five children were randomly allocated to either Active PBM + physiotherapy (n = 13) or PBM sham + physiotherapy (n = 12). PBM was carried out with a LED device (850 nm, 25 J, 50 s per point and 200 mW) at four points over the area with absence of a spiny process. Both groups completed a twelve-week supervised program with two weekly 45-60 min sessions. Pre-training and post-training assessments involved the Pediatric Evaluation of Disability Inventory (PEDI). Muscle activity was assessed using portable electromyography (BTS Engineering) and the electrodes were positioned on the lateral gastrocnemius, anterior tibialis, and rectus femoris muscles. The RMS data were recorded and analyzed. RESULTS: After 24 sessions of the treatment protocol, improvements were found in the PEDI score. The participants presented greater independence in performing the tasks, requiring less assistance from their caregivers. More significant electrical activity was found in the three muscles evaluated between the rest period and execution of the sit-to-stand tasks, both in the more compromised or less compromised lower limbs. CONCLUSION: Neurofunctional physiotherapy with or without PBM improved functional mobility and electrical muscle activity in children with myelomeningocele.

Photobiomodulation Therapy vs. Corticosteroid for the Management of Erosive/Ulcerative and Painful Oral Lichen Planus. Assessment of Success Rate during One-Year Follow-Up: A Retrospective Study.

Photobiomodulation (PBM) therapy is a promising approach for the management of inflammatory conditions and autoimmune lesions, such as oral lichen planus (OLP). The aim of this retrospective study was to assess the effectiveness of PBM in the management of painful and erosive/ulcerative OLP and to compare it with the standard of care that is the topical application of corticosteroids. 96 patients were included with erosive and painful OLP. 48 patients received PBM therapy and 48 received corticosteroids. Data was collected retrospectively on pain using the visual analogue scale; clinical aspects of lesions were assessed with the REU score, and the recurrence rate was noted. One session of PBM therapy with a helium-neon red light (635 nm) was carried out every 48 h for 6 weeks. Treatments were mainly made in contact mode, using a fiber with a diameter of 600 µm (0.6 mm). The output power of the laser beam was calibrated by a power meter. A delivered power of 0.1 W was used for 40 s in a continuous wave (CW), corresponding to a delivered energy of 4 J. The delivered energy density related to the fiber diameter was 1415 J/cm2. Each treated point was considered as 1 cm2 of diameter. PBM therapy within these parameters was carried out on each point until the totality of the lesion was covered, including the non-erosive OLP area. Furthermore, healthy mucosa within 5 mm of the lesion was also irradiated with the same conditions. This PBM treatment was performed during 6 consecutive weeks. The topical corticosteroid treatment consisted of cortisone application to cover the OLP 3 times/day for 6 weeks. Follow-up was made at 6 weeks and at 3, 6 and 12 months. After 6 weeks, both groups showed complete absence of pain, and a complete disappearance of ulcerative/erosive areas. No significant difference was found for both groups concerning the recurrence rate of erosive OLP during the follow-up period; values were 0% at 6 weeks for both groups and 79% and 87.5% for the corticosteroid and PBM group, respectively, at 12 months of follow-up. PBM is effective for managing OLP and is significantly similar to topical corticosteroids without any need for the use of medication and with no reported side effects.

Clinical evaluation of in-office tooth whitening with violet LED (405 nm): A double-blind randomized controlled clinical trial.

BACKGROUND: Although there is little evidence showing the effectiveness of violet LED on in-office tooth whitening, there are some studies which have reported satisfactory results. This double-blind randomized controlled clinical trial aimed to evaluate the effect of a violet light emission diode (LED) (405 nm) system, used in-office, on tooth whitening, sensitivity, use of medication after whitening and quality of life. METHODS: Eight patients were randomized into 4 groups (n = 20): G1 - violet LED, G2 - 35% carbamide peroxide (CP) and violet LED, G3 only CP 35% and G4 35% hydrogen peroxide (HP). The color was measured using a spectrophotometer at the following times: baseline, 15 and 180days. The colorimetric changes were analyzed using measurements from the CieLab System ΔE (ΔL, Δa and Δb) and the WID (Whiteness Index for Dentistry) for the 4 groups. Tooth sensitivity was recorded via a visual analog scale (VAS). Additionally, the Psychosocial Impact of Dental. Aesthetics Questionnaire (PIDAQ) was used to evaluate quality of life. RESULTS: For the analysis of ΔL, G4 and G2 presented more brightness than G1 and G3 (p<0.05), implying that G2 is at least as good as G4 (p>0.05). For measure of Δa, G4 presented better results, standing out from the other groups. (p<0.05). For Δb, both G4 and G2 showed a greater tendency for blue color than groups G1 and G3 (p <0.05). When analyzing ∆E at the 180-day follow up, G4 produced the highest ∆E, while G3 showed the lowest ∆E. The other 2 whitening groups produced intermediate ∆E values. For ∆W, G1 and G3 significantly differed from G2 and G3. When analyzing the 180-day follow up, G2 produced the highest ∆W, while G3 showed the lowest ∆W. The other two whitening treatments produced intermediate ∆W values. As for sensitivity, only G4 patients showed dental sensitivity within 24 h of the bleaching, with pain ceasing after 48 h. For G4, 33% of the patients needed to take analgesics within the first 24 h after the first 3 whitening sessions. For PIDAQ, there was no overall decrease in score over time for any of the groups and there was no difference between them (p>0.05). CONCLUSION: Our results showed that violet LED was not able to whiten teeth at the same intensity, when used alone, as it was when associated with 35% CP, contrary to our initial hypothesis. However, given that pain was not consistently reported in G2, one could suggest that treatment with LED + 35% CP is quite similar to that of 35% HP when used for tooth whitening, but with better pain outcomes. All treatments suggested an improvement in quality of life.Clinical Trial Registry: This trial is registered at ClinicalTrials.gov; the registration number is NCT03192852 https://clinicaltrials.gov/ct2/show/NCT03192852.

Effect of Photobiomodulation in Lipopolysaccharide-Treated Myoblasts.

Objective: To evaluate the effect of photobiomodulation (PBM) on cell viability, synthesis of nitric oxide (NO), and interleukin (IL)-6 inflammatory cytokine production in myoblasts cultured in the presence of lipopolysaccharides (LPSs). Methods: C2C12 myoblasts were treated with LPS and PBM using different parameters (wavelength: 780 nm; beam spot: 0.04 cm2; power output: 10 or 40 mW; energy density: 5 or 20 J/cm2; and 20-sec exposure time). Nonirradiated cells were used to the control group. Results: An increase in cell viability was found in both LPS groups in comparison with the control. PBM with the higher power output (40 mW) induced a reduction in cell viability. PBM also modulated the synthesis of NO in the myoblasts, but did not alter the expression of IL-6. Conclusions: Based on these findings, PBM is capable of modulating the cell viability and the production of NO in LPS-treated myoblasts and it is, therefore, a possible tool for the treatment of muscle injury caused by infection.

Clinical Evaluation of In-Office Dental Bleaching Using a Violet Light-Emitted Diode.

Objective: To clinically evaluate the effect of the violet light-emitted diode (LED) light (405-410 nm) associated to in-office dental bleaching with 35% carbamide peroxide, on tooth color change and sensitivity. Participant's satisfaction after treatment was also evaluated. Materials and methods: A total of 50 participants were selected and randomized into a treatment group (n = 25): G1-two bleaching sessions of 30 min each, with 7-day interval (D0 and D7); G2-two bleaching sessions (same protocol as G1) associated with violet LED light, 30 min each session. The color evaluation was performed before and after 7 days of the second session (D0 and D14); the medium third of buccal surface of canine and central incisor teeth were evaluated under VITA Shade Guide and spectrophotometry (subjective and objective). Tooth sensitivity was evaluated immediately after the treatment and after 48 h of each bleaching session (D0, D2, D7, and D9), and a self-perception questionnaire was applied on D14. Results: Data were subjected to nonparametric Mann-Whitney test and both canine and central incisor teeth presented color change. Group G2 showed significantly more change than G1. Fisher's exact test showed no statistically significant dental sensitivity differences between groups. Both groups reported a high level of satisfaction but chi-square test showed statistically higher satisfied patients with dental bleaching in G2 than G1. Conclusions: The violet LED light (405-410 nm) could improve dental bleaching effectiveness, without sensitivity increase.

Evaluation of in-office tooth whitening treatment with violet LED: protocol for a randomised controlled clinical trial.

INTRODUCTION: In-office tooth whitening treatment using violet light emited diode (LED) (405 nm) is a novel bleaching method that causes less sensitivity while offering the same effectiveness as the gold standard (35% hydrogen peroxide, H2O2). This study describes a protocol for the first randomised controlled clinical trial to compare the effects of the two methods. METHODS AND ANALYSIS: Eighty patients will be divided into four groups: G1 violet LED; G2 violet LED +35% carbamide peroxide; G3 35% H2O2 and G4 violet LED +gingivoplasty. Colour will be measured at baseline, immediately after the first session and at the 15 and 180 days follow-up using the Vita Classical and the digital Easyshade V spectrophotometer (Vita, Zahnfabrik, Germany). Sensitivity after whitening will be measured using the Visual Analogue Scale at baseline and at each session in all groups and in all follow-ups. The tissue removed during gingivoplasty (G4) will be submitted to immunohistochemical analysis for the determination of inflammatory changes caused by violet LED. The Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) will be evaluated before, as well as at established time point controls. The results will be expressed as mean and SD values. After determining the normality of the data, a one-way repeated-measures analysis of variance will be used for the comparison of data with normal distribution and the Kruskal-Wallis test will be used for data with non-normal distribution. A p<0.05 will be considered indicative of statistical significance. After determining the normality of the data, the Kruskal-Wallis test will be used for non-parametric data. Multivariate analysis of variance (MANOVA) and the Wilcoxon test will be used for comparing data from the PIDAQ. ETHICS AND DISSEMINATION: This protocol has been approved by the Human Research Ethics Committee of UniversidadeNove de Julho (certificate: 2.034.518). The findings will be published in a peer-reviewed journal. TRIAL REGISTRATION NUMBER: NCT03192852; Pre-results.

Effect of different power settings of Er,Cr:YSGG laser before or after tribosilicatization on the microshear bond strength between zirconia and two types of cements.

The aim of this study was to evaluate the effect of different output powers of Er,Cr:YSGG laser and the association with tribochemical silica coating on the bond strength between zirconia ceramic and two resin cements. One hundred ninety-two zirconia ceramic bars (IPS e-max ZirCAD Ivoclar Vivadent-) were sectioned (6 × 6 × 4 mm), sintered, and randomly divided into 12 groups for each cement system according to the surface treatment (n = 8): C-without treatment (control); R-tribochemical coating + resin cement (control); 2L-laser (2.0 W) + resin cement; 2LR-laser (2.0 W) + tribochemical coating + resin cement; R2L-tribochemical coating + laser (2.0 W) + resin cement; 2.5L-laser (2.5 W) + resin cement; 2.5LR-laser (2.5 W) + tribochemical coating + resin cement; R2.5L-tribochemical coating + laser (2.5 W) + resin cement; 3L-laser (3.0 W) + resin cement; 3LR-laser (3.0 W) + tribochemical coating + resin cement, R3L-tribochemical coating + laser (3.0 W) + resin cement; and RPHO-tribochemical + resin cement + photoactivation (control). After the surface treatment, the respective primers were applied, and resin cements, Multilink N, Ivoclar Vivadent (M), and Panavia F 2.0, Kuraray Medical Inc. (P), were inserted into Tygon molds which were bonded to the zirconia bars. Each specimen received two cements bars. After 24 h of storage in a relative humidity (100%) at 37 °C, they were evaluated by the microshear test speed of 1 mm/min. The microshear values were analyzed by one-way ANOVA and Tukey's test (α = 0.05). ANOVA showed statistically significant differences among the evaluated groups. The highest bond strength was observed in RPHO, which statistically differed from all groups. The lowest bond strength was observed in M2.5L (Multilink N) and in P3LR (Panavia F 2.0). It can be concluded that the lowest power output tested was suitable and showed bond strength values similar to tribochemical silica deposition. The light curing is important to adhesion and the tribosilicatizated surface achieves similar microshear values to untreated surface in absence of light.

Photodynamic Therapy Associated with a Blue Dye Papain-Based Gel and Evaluation of Its Degradation of Type I Collagen Fibers.

OBJECTIVE: The aim of this in vitro study was to evaluate the degradation of type I collagen fibers after treatment with a papain-based gel associated with a blue dye (PapaMBlue™) for use in antimicrobial photodynamic therapy. MATERIALS AND METHODS: For such, 60 bioabsorbable membrane sponge discs were used. Group 1 was the negative control group. In groups 2, 3, and 4, the papain-based gel PapaMBlue gel was applied all over the samples for 4 min and irradiated using red laser (660 ± 10 nm) with 15, 30, and 40 J/cm2, respectively. In group 5, the papain-based gel was applied all over the samples for 4 min. In group 6, the photosensitizing dye was applied all over the samples for 4 min. The compositional analysis of the samples was performed using ATR-FTIR (attenuated total reflectance-Fourier transformed infrared spectroscopy). The data were statistically analyzed using ANOVA and Tukey's test (p < 0.05). RESULTS: Neither classic Papacarie™ nor the modified product with a photosensitizing agent (PapaMBlue) promoted collagen degradation. CONCLUSIONS: The irradiation of methylene blue added to papain gel with red light did not alter the chemical structure of type I collagen.

Analysis of Human Tooth Pulp Chamber Temperature After 670 nm Laser Irradiation: In Vitro Study.

OBJECTIVE: One of the limiting factors of employing laser radiation on dental therapies is the potential of causing thermal injuries to pulp tissues. The purpose of this study was to evaluate intra-chamber temperature increase on extracted human teeth exposed to 670 nm wavelength InGaAlP laser diode radiation. MATERIALS AND METHODS: In vitro intra-chamber temperature measurements of 12 standardized human teeth (incisors, canines, premolars, and molars; n = 3) were taken both before and after laser radiation. A type-K thermocouple fast-response thermocouple wire with a 0.5 mm diameter probe was inserted into the tooth pulp chamber (ICEL-Manaus-brand). The laser device Lasotronic-brand InGaAlP laser diode was used to irradiate tooth enamel, perpendicularly to the external surface for 30 sec, with power of levels of 340, 272, 204, 136, and 68 mW. The measurements were taken at three time points: 0, 30 sec, and 3 min after the laser irradiation. Measurements were repeated 24 h after removal and reinsertion of the probe in the pulp chamber. The temperature gradient (ΔT in °C) was calculated (ΔT = final temperature-initial temperature) for each group. Data of ΔT were statistically analyzed by two-way analysis of variance (ANOVA) at the 95% confidence level and compared by Tukey post hoc test (α = 0.05). RESULTS: ANOVA showed statistically significant differences to the interaction of factors (p < 0.05). The highest ΔT values obtained were observed to incisors with 340 mW, 272 mW; 204 mW of power (respectively 4.7°C, 4.2°C, and 3.1°C); and canines presented the lowest ΔT (0.8°C-0.3°C) with no influence of power output. CONCLUSIONS: Since the thermal increase was observed in this study, especially in incisors, attention should be paid to avoid pulpal damage.

Bond Strength of Abraded and Non-Abraded Bleached Enamel to Resin After Er,Cr:YSGG Laser Irradiation.

OBJECTIVE: The objective of the study was to evaluate the microtensile bond strength (µTBS) of a composite resin to abraded or non-abraded bleached enamel after Er,Cr:YSGG laser irradiation and to observe the fracture patterns of the tested interfaces. MATERIALS AND METHODS: Two hundred twenty-eight bovine incisors were sectioned, resulting in 228 enamel blocks (7 × 4 × 4 mm3) that were divided into 12 groups (n = 19) according to the factors "adhesion" after bleaching (immediate adhesion; after 14 days; and a control group with adhesion on unbleached teeth); enamel "abrasion" (with or without abrasion simulating cavity preparation); and "laser" (with or without Er,Cr:YSGG laser irradiation). Bleached enamel groups were treated with 20% carbamide peroxide, 8 h/day for 21 days. Abrasion was performed with silicon carbide sandpaper. Specimens were restored with adhesive system and a composite resin (Adper Single Bond 2 and Z250; 3M ESPE). After 7 days, specimens were prepared by cutting into 1 mm beans to µTBS test performed in a universal testing machine. Fracture mode analysis was performed by using a stereoscopic loupe. The µTBS data were statistically analyzed by three-way analysis of variance with 95% confidence level and compared by running a Tukey post hoc test (α = 0.05). RESULTS: There was no statistically significant difference between triple interaction and double interactions among factors. There was no significant difference between the factors "adhesion," "abrasion," and "laser." Laser irradiation produced significantly lower bond strength values in irradiated groups compared with the non-irradiated ones. All groups had a high percentage of adhesive failures. CONCLUSIONS: Abrasion provided no benefit to bond strength of composite resins to bleached enamel. Er,Cr:YSGG (20 Hz, 0.5 W, 3.97 J/cm2) treatment reduced the bond strength of composite resins to enamel.

Effect of Nd:YAG and CO2 Laser Irradiation on Prevention of Enamel Demineralization in Orthodontics: In Vitro Study.

OBJECTIVE: The aim of this study was to investigate Nd:YAG and CO2 laser effects in the prevention of demineralization in deeper layers of enamel via successive acid challenge cycles. BACKGROUND DATA: Lasers are promising in the prevention of enamel demineralization around the orthodontic brackets; however, there are very few studies that evaluate if the effects of treatment could be extended after successive acid challenge cycles due to permanent enamel structural alterations. MATERIALS AND METHODS: Human enamel samples were divided into five groups (n = 12): G1-application of 1.23% acidulated fluoride phosphate gel (AFP, control); G2-Nd:YAG laser irradiation (0.6 W, 84.9 J/cm2, 10 Hz, 110 µs, contact mode); G3-Nd:YAG laser irradiation associated with AFP; G4-CO2 laser irradiation (0.5 W, 28.6 J/cm2, 50 Hz, 5 µs, and 10 mm focal distance); and G5-CO2 laser irradiation associated with AFP. The samples were submitted to successive acid challenge cycles. Quantitative light-induced fluorescence and scanning electron microscopy were used to assess enamel demineralization. The data were statistically compared (α = 5%). RESULTS: G1: 50.87 ± 4.57; G2: 47.72 ± 2.87; G3: 50.96 ± 4.01; G4: 28.21 ± 2.19; and G5: 30.13 ± 6.38. The CO2 laser groups had significantly lower mineral losses than those observed in all other groups after successive acid challenge cycles. CONCLUSIONS: Only the CO2 laser (10.6 µm) irradiation prevents enamel demineralization around the orthodontic brackets even after exposure to successive acid challenges. The CO2 laser at 10.6 µm showed a deeper effect in enamel regarding caries prevention.

Evaluation of Temperature and Roughness Alteration of Diode Laser Irradiation of Zirconia and Titanium for Peri-Implantitis Treatment.

OBJECTIVE: This study investigated the effects of diode laser (gallium, aluminium, arsenide [GaAlAs]) irradiation with decontamination parameters on the temperature and roughness of yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP), titanium (TI), and sandblasted large grit acid-etched titanium (SLA). MATERIALS AND METHODS: Three groups (n = 10) of standardized disks with 5 mm diameter and 2 mm thickness were produced with Y-TZP obtained from computer-aided design and computer-aided manufacturing (CAD-CAM), machined TI and SLA. The diode laser single application (808 nm, 20 sec, 1 W, 50 Hz, t on = 100 ms, t off = 100 ms, energy density = 28.29 J/cm(2)) was performed in contact mode, on each disk. The temperature was measured by a thermosensor attached to a digital thermometer fixed to the opposite irradiated surface. The temperature gradient (ΔT) was calculated (ΔT = final temperature - initial temperature) for each group. The parameters Ra (in µm) and Sa (in µm(2)) were measured by white light confocal laser microscopy to express the surface roughness. Data of ΔT was statistically analyzed by one way ANOVA at the 95% confidence level and compared by Tukey post-hoc test (α = 0.05). Roughness data was analyzed by t test. RESULTS: The diode laser irradiation presented the following results (ΔT value): Y-TZP = 10.3°C(B); TI = 38.6°C(A), and SLA = 26.7°C(A). The ΔT values ((°)C) of the titanium groups were higher than for the Y-TZP group. For both roughness parameters (Ra and Sa), data did not show statistical significant differences to "irradiation" factor (p > 0.05) to Y-TZP and SLA. The Ra results (in µm) were: Y-TZP (control) = 0.73 (0.55); Y-TZP (irradiated) = 0.45 (0.27); SLA (control) = 0.74 (0.23); and SLA (irradiated) = 0.99 (0.33). The Sa results (in µm(2)) were: Y-TZP (control) = 1.39 (1.05); Y-TZP (irradiated) = 0.73 (0.41); SLA (control) = 0.85 (0.08); and SLA (irradiated) = 1.27 (0.44). CONCLUSIONS: Diode laser irradiation for peri-implantitis treatment increased both zirconia and TI temperature without surface roughness alterations.

Effects of heating by steam autoclaving and Er:YAG laser etching on dentin components.

The simultaneous need for infection-control protocols in sample preparations and for safe laser irradiation parameters prompted this study about the effects of heat produced by both sample sterilization and laser etching on dentin components. The dentin was exposed on 30 bovine incisors, and then divided into two main groups: autoclaved (group A) or thymol treatment (group B). The surface of the dentin was schematically divided into four areas, with each one corresponding to a treatment subgroup. The specimens were either etched with phosphoric acid (control-CG) or irradiated with Er:YAG laser (subgroups: I-80 mJ, II-120 mJ, and III-180 mJ). Elemental distribution maps were done by energy-dispersive X-ray fluorescence (µ-EDXRF) on each treatment area. The dentin surface in depth was exposed and line-scan maps were performed. The B_CG treatment produced the best distribution of calcium (Ca) and phosphorus (P) content throughout the dentin surface. Er:YAG laser etching produced irregular patterns of elemental distribution in the dentin. Laser energies of 120 and 180 mJ produced the highest maximum calcium values. The Er:YAG laser energy of 180 mJ produced a localized increase in Ca and P content on the superficial layer of the dentin (∼ 0-0.10 mm). The autoclaving treatment of samples in experiments is not recommended since it produced damaging effects on dentin components. Er:YAG laser irradiation produced a heterogeneous Ca and P distribution throughout the dentin surface with areas of increased Ca concentration, and this may affect clinically the permeability, solubility, or adhesive characteristics of dental hard tissues with restorative procedures.

Raman spectroscopy validation of DIAGNOdent-assisted fluorescence readings on tibial fractures treated with laser phototherapy, BMPs, guided bone regeneration, and miniplates.

OBJECTIVES: We aimed to assess through Raman spectroscopy and fluorescence the levels of calcium hydroxyapatite (CHA) and lipids and proteins in complete fractures treated with internal rigid fixation (IRF) treated or not with laser phototherapy (LPT) and associated or not with bone morphogenetic proteins (BMPs) and guided bone regeneration (GBR). BACKGROUND: Fractures have different etiologies and treatments and may be associated with bone losses. LPT has been shown to improve bone healing. METHODS: Tibial fractures were created on 15 animals and divided into five groups. LPT started immediately after surgery, repeated at 48-h intervals. Animal death occurred after 30 days. RESULTS: Raman spectroscopy and fluorescence were performed at the surface. Fluorescence data of group IRF + LPT + Biomaterial showed similar readings to those of the group IRF-no bone loss. Significant differences were seen between groups IRF + LPT + Biomaterial and IRF + LPT; IRF + LPT + Biomaterial; and IRF + Biomaterial; and between IRF + LPT + Biomaterial and IRF. CH groups of lipids and proteins readings showed decreased levels of organic components in subjects treated with the association of LPT, biomaterial, and GBR. Pearson correlation showed that fluorescence readings of both CHA and CH groups of lipids and proteins correlated negatively with the Raman data. CONCLUSIONS: The use of both methods indicates that the use of the biomaterials associated with infrared LPT resulted in a more-advanced and higher quality of bone repair in fractures treated with miniplates and that the DIAGNOdent may be used to perform optical biopsy on bone.

Use of 660-nm diode laser in the prevention and treatment of human oral mucositis induced by radiotherapy and chemotherapy.

OBJECTIVE: The aim of this multidisciplinary study was to evaluate quantitatively and qualitatively the effect of a 660-nm diode laser in the prevention and treatment of human oral mucositis (OM) in patients suffering from head and neck cancer who had undergone radiotherapy and chemotherapy. BACKGROUND DATA: OM is a severe oral lesion resulting from the toxic effects of treatment for cancer in the head and neck region. Low-level laser therapy is indicated to prevent and treat this oral complication and may be used alone or in association with conventional drug treatment, producing pain relief and wound repair. METHODS: This study included 72 patients with head and neck cancer treated at the Cancer Hospital of Mato-Grosso, Brazil, and divided into a control group (C; n = 36) and a laser group (L; n = 36). Laser therapy was performed in combination with radiotherapy and chemotherapy twice a week using a diode laser (lambda = 660 nm, power = 30 mW, spot size = 2 mm, energy = 2 J per point). RESULTS: Statistically significant differences were observed between the two groups. Patients in group L usually did not present with OM or pain, but all patients in group C presented with OM ranging from Level I to III associated with pain. This difference was significant from week 1 on, increased until week 4 and remained stable up to week 7. CONCLUSION: Laser therapy was effective in preventing and treating oral effects induced by radiotherapy and chemotherapy, thus improving the patient's quality of life.

Dental enamel irradiated with infrared diode laser and photo-absorbing cream: part 2--EDX study.

OBJECTIVE: The effects of laser-induced compositional changes on the enamel were investigated by energy-dispersive X-ray fluorescence spectrometry (micro-EDX). After cariogenic challenge, we administered treatment of low-level infrared diode laser and a photo-absorbing cream (used to intensify the superficial light absorption). BACKGROUND DATA: Dental caries is considered the most prevalent oral disease. A simple and noninvasive caries preventive regimen is treating tooth enamel with a laser, either alone or in combination with fluoride, which reduces enamel solubility and dissolution rates. High power lasers are still not widely used in private practice. Low-power near-infrared lasers may be an alternative approach. Energy-dispersive micro-EDX is a versatile and nondestructive spectroscopic technique that allows for a qualitative and quantitative elemental analysis of inorganic enamel components, such as calcium and phosphorus. MATERIALS AND METHODS: Twenty-four extracted or exfoliated caries-free deciduous molars were divided into six groups: 1) control group (CTR-no treatment); 2) infrared laser treatment (L) (lambda = 810 nm, 100 mW/cm(2), 90 sec, 4.47 J/cm(2), 9 J); 3) infrared laser irradiation and photo-absorbing agent (CL); 4) photo-absorbing agent alone (C); 5) infrared laser irradiation and fluoridated photo-absorbing agent (FCL); and 6) fluoridated photo-absorbing agent alone (FC). Samples were analyzed using micro-EDX after two sets of treatments and pH cycling cariogenic challenges. RESULTS: The CL group showed statistically significant increases in calcium and phosphorus (wt%) compared with the CTR group. The Ca/P ratio was similar in the FCL and CTR groups. There was a significant laser-induced reduction compared with the CTR group, and there was a possible modification of the organic balance content in enamel treated with laser and cream. CONCLUSION: micro-EDX may be able to detect compositional changes in mineral phases of lased enamel under cariogenic challenge. Our results suggest that with a combined laser and photo-absorbing agent (CL) treatment, there was a possible disorganization of organic content in the tooth enamel with hydroxyapatite crystal reordering and reorganization.

Dental enamel irradiated with infrared diode laser and photoabsorbing cream: Part 1 -- FT-Raman Study.

OBJECTIVE: The aim of this FT-Raman study was to investigate laser-induced compositional changes in enamel after therapy with a low-level infrared diode laser and a photoabsorbing cream, in order to intensify the superficial light absorption before and after cariogenic challenge. BACKGROUND DATA: Dental caries remains the most prevalent disease during childhood and adolescence. Preventive modalities include the use of fluoride, reduction of dietary cariogenic refined carbohydrates, plaque removal and oral hygiene techniques, and antimicrobial prescriptions. A relatively simple and noninvasive caries preventive regimen is treating tooth enamel with laser irradiation, either alone or in combination with topical fluoride treatment, resulting in reduced enamel solubility and dissolution rates. Due to their high cost, high-powered lasers are still not widely employed in private practice in developing countries. Thus, low-power red and near-infrared lasers appear to be an appealing alternative. MATERIALS AND METHODS: Twenty-four extracted or exfoliated caries-free deciduous molars were divided into six groups: control group (no treatment; n = 8); infrared laser treatment (L; n = 8) (810 nm at 100 mW/cm(2) for 90 sec); infrared diode laser irradiation (810 nm at 100 mW/cm(2) for 90 sec) and photoabsorbing cream (IVL; n = 8); photoabsorbing cream alone (IV; n = 8); infrared diode laser irradiation (810 nm at 100 mW/cm(2) for 90 sec) and fluorinated photoabsorbing agent (IVLF; n = 8); and fluorinated photoabsorbing agent alone (IVF; n = 8). Samples were analyzed using FT-Raman spectroscopy before and after pH cycling cariogenic challenge. RESULTS: There was a significant laser-induced reduction and possible modification of the organic matrix content in enamel treated with the low-level diode laser (the L, IVL, and IVFL groups). CONCLUSION: The FT-Raman technique may be suitable for detecting compositional and structural changes occurring in mineral phases and organic phases of lased enamel under cariogenic challenge.

Effects of Er:YAG laser irradiation and manipulation treatments on dentin components, part 2: energy-dispersive X-ray fluorescence spectrometry study.

The effects of laser etching, decontamination, and storage treatments on dentin components were studied by energy-dispersive X-ray fluorescence spectrometry (EDXRF). Thirty bovine incisors were prepared to expose the dentin surface and then divided into two main groups based upon the decontamination process and storage procedure: autoclaved (group A, n=15) or stored in aqueous thymol solution (group B, n=15). The surfaces of the dentin slices were schematically divided into four areas, with each one corresponding to a treatment subgroup. The specimens were either etched with phosphoric acid (control subgroup) or irradiated with erbium-doped yttrium-aluminum-garnet (Er:YAG) laser (subgroups: I-80 mJ, II-120 mJ, and III-180 mJ). Samples were analyzed by micro-EDXRF, yielding three spectra for each area (before and after treatment). Surface mappings covering an area of 80x60 points with steps of 20 mum were also performed on selected specimens. The amount of Ca and P in group A specimens decreased significantly (P<0.05) after the acid etching and the CaP ratio increased (P<0.001). Er:YAG laser-etching using lower laser energies did not produce significant changes in dentin components. The mapping data support the hypothesis that acid etching on dentin produced a more chemically homogeneous surface and thus a more favorable surface for the diffusion of adhesive monomers.

Comparison of temperature increase in in vitro human tooth pulp by different light sources in the dental whitening process.

This work evaluated the increase in dental pulp temperature caused by different light sources, used in the dental whitening process, following the irradiation protocol from the light manufacturer. Human incisor, canine and premolar teeth were used. A whitening gel made of hydrogen peroxide 35% v/v and a condenser agent were applied to each tooth, on the vestibular surface, and was activated by five different light sources: photo-polymerizer with blue bandpass filtered halogen lamp (HL) (600 mW, lambda = 430-480 nm), blue light emitting diode (LED) (BL) (1 W, lambda = 470 nm), blue LED associated with infrared diode laser (BL+IL) (120 mW, lambda = 795 nm), green LED (GL) (600 mW, lambda = 530 nm) and green LED associated with infrared diode laser (GL+IL) (120 mW, lambda = 795 nm), with the equipment turned on, an exposure time of 1 min, and resting time of 30 s, repeated three times. The temperature was measured at the beginning and ending of exposure by a digital thermometer (type K thermocouple), placed inside the dental pulp chamber. Analyzing the mean temperature variation that occurred along the irradiation time, we found that the BL and BL+IL group presented the highest temperature variations, mainly in the incisor tooth. The GL and GL+IL presented the lowest temperature increase. The maximum temperature variation reached was 5.5 degrees C for the BL+IL in the incisor tooth. The HL presented a smaller temperature variation than the BL did, but it had a residual temperature when the light was off. The GL and GL+IL promoted a non-significant temperature increase, as low as 1 degrees C, even with total power equal to the that of the HL.