Optimization of Peptide Inhibitors of ß-Klotho as Antagonists of Fibroblast Growth Factors 19 and 21.

Fibroblast growth factors 19 and 21 (FGF19 and FGF21) have biological actions that render them promising clinical candidates for treatment of metabolic diseases, particularly dyslipidemia and nonalcoholic steatohepatitis (NASH). These two atypical endocrine FGFs employ an accessory receptor ß-klotho (KLB) to signal through classical FGF receptors (FGFRs). FGF19 and FGF21 bind to KLB via their C-terminus, to orient the N-terminus for productive interaction with FGFRs. The C-terminal peptides have been shown to competitively inhibit this biological agonism. We report here an assessment of the structural relationship in the C-terminal sequences of FGF19 and FGF21 that led to the identification of a sustained-acting peptide optimized for pharmacological use. It demonstrates high potency and selectivity to antagonize FGF19 and FGF21 in cells coexpressing FGFRs and KLB. This peptide was also effective in blocking FGF19 and FGF21 mediated downstream gene expression (i.e., Fos and Egr1) in vivo. In DIO mice, this antagonist alters metabolic function as assessed by changes in body weight, food intake, and plasma insulin. Thus, the selective inhibition of KLB could constitute a medicinal approach to treat diseases associated with excess FGF19 or 21 activity and separately serve as an effective tool to promote a deeper assessment of atypical FGF biology.

A Disulfide Scan of Insulin by [3 + 1] Methodology Exhibits Site-Specific Influence on Bioactivity.

Insulin is the principal hormone involved in the regulation of metabolism and has served a seminal role in the treatment of diabetes. Building upon advances in insulin synthetic methodology, we have developed a straightforward route to novel insulins containing a fourth disulfide bond in a [3 + 1] fashion establishing the first disulfide scan of the hormone. All the targeted analogs accommodated the constraint to demonstrate an unexpected conformational flexibility of native insulin. The bioactivity was established for the constrained (4-DS) and unconstrained (3-DS) analogs by in vitro methods, and extended to in vivo study for select peptides. We also identified residue B10 as a preferred anchor to introduce a tether that would regulate insulin bioactivity. We believe that the described [3 + 1] methodology might constitute the preferred approach for performing similar disulfide scanning in peptides that contain multiple disulfides.

Hydrazone ligation strategy to assemble multifunctional viral nanoparticles for cell imaging and tumor targeting.

Multivalent nanoparticle platforms are attractive for biomedical applications because of their improved target specificity, sensitivity, and solubility. However, their controlled assembly remains a considerable challenge. An efficient hydrazone ligation chemistry was applied to the assembly of Cowpea mosaic virus (CPMV) nanoparticles with individually tunable levels of a VEGFR-1 ligand and a fluorescent PEGylated peptide. The nanoparticles recognized VEGFR-1 on endothelial cell lines and VEGFR1-expressing tumor xenografts in mice, validating targeted CPMV as a nanoparticle platform in vivo.

A conformational switch in human immunodeficiency virus gp41 revealed by the structures of overlapping epitopes recognized by neutralizing antibodies.

The membrane-proximal external region (MPER) of the human immunodeficiency virus (HIV) envelope glycoprotein (gp41) is critical for viral fusion and infectivity and is the target of three of the five known broadly neutralizing HIV type 1 (HIV-1) antibodies, 2F5, Z13, and 4E10. Here, we report the crystal structure of the Fab fragment of Z13e1, an affinity-enhanced variant of monoclonal antibody Z13, in complex with a 12-residue peptide corresponding to the core epitope (W(670)NWFDITN(677)) at 1.8-A resolution. The bound peptide adopts an S-shaped conformation composed of two tandem, perpendicular helical turns. This conformation differs strikingly from the alpha-helical structure adopted by an overlapping MPER peptide bound to 4E10. Z13e1 binds to an elbow in the MPER at the membrane interface, making relatively few interactions with conserved aromatics (Trp672 and Phe673) that are critical for 4E10 recognition. The comparison of the Z13e1 and 4E10 epitope structures reveals a conformational switch such that neutralization can occur by the recognition of the different conformations and faces of the largely amphipathic MPER. The Z13e1 structure provides significant new insights into the dynamic nature of the MPER, which likely is critical for membrane fusion, and it has significant implications for mechanisms of HIV-1 neutralization by MPER antibodies and for the design of HIV-1 immunogens.

Multiplex charge-transfer interactions between quantum dots and peptide-bridged ruthenium complexes.

Simultaneous detection of multiple independent fluorescent signals or signal multiplexing has the potential to significantly improve bioassay throughput and to allow visualization of concurrent cellular events. Applications based on signal multiplexing, however, remain hard to achieve in practice due to difficulties in both implementing hardware and the photophysical liabilities associated with available organic dye and protein fluorophores. Here, we used charge-transfer interactions between luminescent semiconductor quantum dots (QDs) and proximal redox complexes to demonstrate controlled quenching of QD photoemission in a multiplexed format. In particular, we show that, because of the ability of the Ru complex to effectively interact with CdSe-ZnS QDs emitting over a broad window of the optical spectrum, higher orders of multiplexed quenching can be achieved in a relatively facile manner. Polyhistidine-appended peptides were site-specifically labeled with a redox-active ruthenium (Ru) phenanthroline complex and self-assembled onto QDs, resulting in controlled quenching of the QD emission. Different QD colors either alone or coupled to Ru-phen-peptide were then mixed together and optically interrogated. Composite spectra collected from mixtures ranging from four up to eight distinct QD colors were deconvoluted, and the individual QD photoluminescence (PL) loss due to charge transfer was quantified. The current multiplexing modality provides a simpler format for exploiting the narrow, size-tunable QD emissions than that offered by resonance energy transfer; for the latter, higher orders of multiplexing are limited by spectral overlap requirements.

Intracellular delivery of quantum dot-protein cargos mediated by cell penetrating peptides.

We utilize cell penetrating peptide functionalized QDs as specific vectors for the intracellular delivery of model fluorescent protein cargos. Multiple copies of two structurally diverse fluorescent proteins, the 27 kDa monomeric yellow fluorescent protein and the 240 kDa multichromophore b-phycoerythrin complex, were attached to QDs using either metal-affinity driven self-assembly or biotin-Streptavidin binding, respectively. Cellular uptake of these complexes was found to depend on the additional presence of cell-penetrating peptides within the QD-protein conjugates. Once inside the cells, the QD conjugates were mostly distributed within endolysosomal compartments, indicating that intracellular delivery of both QD assemblies was primarily driven by endocytotic uptake. Cellular microinjection of QD-fluorescent protein assemblies was also utilized as an alternate delivery strategy that could bypass the endocytic pathway. Simultaneous signals from both the QDs and the fluorescent proteins allowed verification of their colocalization and conjugate integrity upon delivery inside live cells. Due to their intrinsic fluorescence properties, this class of proteins provides a unique tool to test the ability of QDs functionalized with cell penetrating peptides to mediate the intracellular delivery of both small and large size protein cargos. Use of QD-peptide/fluorescent protein vectors may make powerful tools for understanding the mechanisms of nanoparticle-mediated drug delivery.

Antibody elicited against the gp41 N-heptad repeat (NHR) coiled-coil can neutralize HIV-1 with modest potency but non-neutralizing antibodies also bind to NHR mimetics.

Following CD4 receptor binding to the HIV-1 envelope spike (Env), the conserved N-heptad repeat (NHR) region of gp41 forms a coiled-coil that is a precursor to the fusion reaction. Although it has been a target of drug and vaccine design, there are few monoclonal antibody (mAb) tools with which to probe the antigenicity and immunogenicity specifically of the NHR coiled-coil. Here, we have rescued HIV-1-neutralizing anti-NHR mAbs from immune phage display libraries that were prepared (i) from b9 rabbits immunized with a previously described mimetic of the NHR coiled-coil, N35(CCG)-N13, and (ii) from an HIV-1 infected individual. We describe a rabbit single-chain Fv fragment (scFv), 8K8, and a human Fab, DN9, which specifically recognize NHR coiled-coils that are unoccupied by peptide corresponding to the C-heptad repeat or CHR region of gp41 (e.g. C34). The epitopes of 8K8 and DN9 were found to partially overlap with that of a previously described anti-NHR mAb, IgG D5; however, 8K8 and DN9 were much more specific than D5 for unoccupied NHR trimers. The mAbs, including a whole IgG 8K8 molecule, neutralized primary HIV-1 of clades B and C in a pseudotyped virus assay with comparable, albeit relatively modest potency. Finally, a human Fab T3 and a rabbit serum (both non-neutralizing) were able to block binding of D5 and 8K8 to a gp41 NHR mimetic, respectively, but not the neutralizing activity of these mAbs. We conclude from these results that NHR coiled-coil analogs of HIV-1 gp41 elicit many Abs during natural infection and through immunization, but that due to limited accessibility to the corresponding region on fusogenic gp41 few can neutralize. Caution is therefore required in targeting the NHR for vaccine design. Nevertheless, the mAb panel may be useful as tools for elucidating access restrictions to the NHR of gp41 and in designing potential improvements to mimetics of receptor-activated Env.

An affinity-enhanced neutralizing antibody against the membrane-proximal external region of human immunodeficiency virus type 1 gp41 recognizes an epitope between those of 2F5 and 4E10.

The membrane-proximal external region (MPER) of human immunodeficiency virus type 1 (HIV-1) gp41 bears the epitopes of two broadly neutralizing antibodies (Abs), 2F5 and 4E10, making it a target for vaccine design. A third Ab, Fab Z13, had previously been mapped to an epitope that overlaps those of 2F5 and 4E10 but only weakly neutralizes a limited set of primary isolates. Here, libraries of Fab Z13 variants displayed on phage were engineered and affinity selected against an MPER peptide and recombinant gp41. A high-affinity variant, designated Z13e1, was isolated and found to be approximately 100-fold improved over the parental Fab not only in binding affinity for the MPER antigens but also in neutralization potency against sensitive HIV-1. Alanine scanning of MPER residues 664 to 680 revealed that N671 and D674 are crucial for peptide recognition as well as for the neutralization of HIV-1 by Z13e1. Ab competition studies and truncation of MPER peptides indicate that Z13e1 binds with high affinity to an epitope between and overlapping with those of 2F5 and 4E10, with the minimal peptide epitope WASLWNWFDITN. Still, Z13e1 remained about an order of magnitude less potent than 4E10 against several isolates of pseudotyped HIV-1. The sum of our molecular analyses with Z13e1 suggests that the segment on the MPER of gp41 between the 2F5 and 4E10 epitopes is exposed on the functional envelope trimer but that access to the specific Z13e1 epitope within this segment is limited. Thus, the ability of MPER-bearing immunogens to elicit potent HIV-1-neutralizing Abs may depend in part on recapitulating the particular constraints that the functional envelope trimer imposes on the segment of the MPER to which Z13e1 binds.

Structural basis of enhanced binding of extended and helically constrained peptide epitopes of the broadly neutralizing HIV-1 antibody 4E10.

Potent, broadly HIV-1 neutralizing antibodies (nAbs) may be invaluable for the design of an AIDS vaccine. 4E10 is the broadest HIV-1 nAb known to date and recognizes a contiguous and highly conserved helical epitope in the membrane-proximal region of gp41. The 4E10 epitope is thus an excellent target for vaccine design as it is also highly amenable to peptide engineering to enhance its helical character. To investigate the structural effect of both increasing the peptide length and of introducing helix-promoting constraints in the 4E10 epitope, we have determined crystal structures of Fab 4E10 bound to an optimized peptide epitope (NWFDITNWLWYIKKKK-NH(2)), an Aib-constrained peptide epitope (NWFDITNAibLWRR-NH(2)), and a thioether-linked peptide (NWFCITOWLWKKKK-NH(2)) to resolutions of 1.7 A, 2.1 A, and 2.2 A, respectively. The thioether-linked peptide is the first reported structure of a cyclic tethered helical peptide bound to an antibody. The introduced helix constraints limit the conformational flexibility of the peptides without affecting interactions with 4E10. The substantial increase in affinity (10 nM versus 10(4) nM of the IC(50) of the original KGND peptide template) is largely realized by 4E10 interaction with an additional helical turn at the peptide C terminus that includes Leu679 and Trp680. Thus, the core 4E10 epitope was extended and modified to a WFX(I/L)(T/S)XX(L/I)W motif, where X does not play a major role in 4E10 binding and can be used to introduce helical-promoting constraints in the peptide epitope.

Self-assembled quantum dot-peptide bioconjugates for selective intracellular delivery.

We demonstrate the use of self-assembled luminescent semiconductor quantum dot (QD)-peptide bioconjugates for the selective intracellular labeling of several eukaryotic cell lines. A bifunctional oligoarginine cell penetrating peptide (based on the HIV-1 Tat protein motif) bearing a terminal polyhistidine tract was synthesized and used to facilitate the transmembrane delivery of the QD bioconjugates. The polyhistidine sequence allows the peptide to self-assemble onto the QD surface via metal-affinity interactions while the oligoarginine sequence allows specific QD delivery across the cellular membrane and intracellular labeling as compared to nonconjugated QDs. This peptide-driven delivery is concentration-dependent and thus can be titrated. Upon internalization, QDs display a punctate-like staining pattern in which some, but not all, of the QD signal is colocalized within endosomes. The effects of constant versus limited exposure to QD-peptide conjugates on cellular viability are evaluated by a metabolic specific assay, and clear differences in cytotoxicity are observed. The efficacy of using peptides for selective intracellular delivery is highlighted by performing a multicolor QD labeling, where we found that the presence or absence of peptide on the QD surface controls cellular uptake.

Proteolytic activity monitored by fluorescence resonance energy transfer through quantum-dot-peptide conjugates.

Proteases are enzymes that catalyse the breaking of specific peptide bonds in proteins and polypeptides. They are heavily involved in many normal biological processes as well as in diseases, including cancer, stroke and infection. In fact, proteolytic activity is sometimes used as a marker for some cancer types. Here we present luminescent quantum dot (QD) bioconjugates designed to detect proteolytic activity by fluorescence resonance energy transfer. To achieve this, we developed a modular peptide structure which allowed us to attach dye-labelled substrates for the proteases caspase-1, thrombin, collagenase and chymotrypsin to the QD surface. The fluorescence resonance energy transfer efficiency within these nanoassemblies is easily controlled, and proteolytic assays were carried out under both excess enzyme and excess substrate conditions. These assays provide quantitative data including enzymatic velocity, Michaelis-Menten kinetic parameters, and mechanisms of enzymatic inhibition. We also screened a number of inhibitory compounds against the QD-thrombin conjugate. This technology is not limited to sensing proteases, but may be amenable to monitoring other enzymatic modifications.

Structure-function analysis of the epitope for 4E10, a broadly neutralizing human immunodeficiency virus type 1 antibody.

The human immunodeficiency virus type 1 (HIV-1) neutralizing antibody 4E10 binds to a linear, highly conserved epitope within the membrane-proximal external region of the HIV-1 envelope glycoprotein gp41. We have delineated the peptide epitope of the broadly neutralizing 4E10 antibody to gp41 residues 671 to 683, using peptides with different lengths encompassing the previously suggested core epitope (NWFDIT). Peptide binding to the 4E10 antibody was assessed by competition enzyme-linked immunosorbent assay, and the K(d) values of selected peptides were determined using surface plasmon resonance. An Ala scan of the epitope indicated that several residues, W672, F673, and T676, are essential (>1,000-fold decrease in binding upon replacement with alanine) for 4E10 recognition. In addition, five other residues, N671, D674, I675, W680, and L679, make significant contributions to 4E10 binding. In general, the Ala scan results agree well with the recently reported crystal structure of 4E10 in complex with a 13-mer peptide and with our circular dichroism analyses. Neutralization competition assays confirmed that the peptide NWFDITNWLWYIKKKK-NH(2) could effectively inhibit 4E10 neutralization. Finally, to limit the conformational flexibility of the peptides, helix-promoting 2-aminoisobutyric acid residues and helix-inducing tethers were incorporated. Several peptides have significantly improved affinity (>1,000-fold) over the starting peptide and, when used as immunogens, may be more likely to elicit 4E10-like neutralizing antibodies. Hence, this study represents the first stage toward iterative development of a vaccine based on the 4E10 epitope.

Synthesis of constrained helical peptides by thioether ligation: application to analogs of gp41.

We present a straightforward and high yielding method to synthesize constrained helical peptides via thioether ligation; this method represents an attractive alternative to the formation of lactam bridge constraints to induce helicity in peptides.