Effect of nanoparticulate bioactive glass particles on bioactivity and cytocompatibility of poly(3-hydroxybutyrate) composites.

This work investigated the effect of adding nanoparticulate (29 nm) bioactive glass particles on the bioactivity, degradation and in vitro cytocompatibility of poly(3-hydroxybutyrate) (P(3HB)) composites/nano-sized bioactive glass (n-BG). Two different concentrations (10 and 20 wt %) of nanoscale bioactive glass particles of 45S5 Bioglass composition were used to prepare composite films. Several techniques (Raman spectroscopy, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray) were used to monitor their surface and bioreactivity over a 45-day period of immersion in simulated body fluid (SBF). All results suggested the P(3HB)/n-BG composites to be highly bioactive, confirmed by the formation of hydroxyapatite on material surfaces upon immersion in SBF. The weight loss and water uptake were found to increase on increasing bioactive glass content. Cytocompatibility study (cell proliferation, cell attachment, alkaline phosphatase activity and osteocalcin production) using human MG-63 osteoblast-like cells in osteogenic and non-osteogenic medium showed that the composite substrates are suitable for cell attachment, proliferation and differentiation.

Comparative assessment of time-related bioactive glass and calcium hydroxide effects on mechanical properties of human root dentin.

Suspensions of micro- or nanoparticulate SiO(2)-Na(2)O-CaO-P(2)O(5) bioactive glasses could potentially be used as dressings in traumatized front teeth with open apices as an alternative to Ca(OH)(2). These materials have a disinfecting capacity similar to Ca(OH)(2), but bear the advantage of bioactivity. However, because bioactive glasses initially act as alkaline biocides just as Ca(OH)(2) does, they may also negatively affect mechanical dentin properties over time. This was assessed in the current study using standardized human root dentin bars. Specimens were immersed in 1:20 (wt vol(-1)) suspensions of nanometric bioactive glass 45S5 or calcium hydroxide for 1, 10, or 30 days. Control specimens were immersed in pure saline for 30 days (n = 20 per group). Subsequently, modulus of elasticity (E) and flexural strength (FS) of the specimens were determined. Results were compared between groups using one-way anova and Scheffé's post-hoc test. Ca(OH)(2) caused a significant (P < 0.001) 35% drop in mean flexural strength values compared to the control treatment after 10 days. No further change was observed between 10 days and 30 days. Bioactive glass caused a 20% drop in mean flexural strength as compared to the control after 10 days. However, this difference did not reach statistical significance (P > 0.05). No effects of either material on dentin modulus of elasticity values were observed. It was concluded that the calcium hydroxide suspension affected the dentin more than the bioactive glass counterpart; however, the effect was self-limiting and probably restricted to superficial dentin layers, as suggested by the mere decrease in flexural strength but not in modulus of elasticity values.

In vivo and in vitro evaluation of flexible, cottonwool-like nanocomposites as bone substitute material for complex defects.

The easy clinical handling and applicability of biomaterials has become a focus of materials research due to rapidly increasing time and cost pressures in the public health sector. The present study assesses the in vitro and in vivo performance of a flexible, mouldable, cottonwool-like nanocomposite based on poly(lactide-co-glycolide) and amorphous tricalcium phosphate nanoparticles (PLGA/TCP 60:40). Immersion in simulated body fluid showed exceptional in vitro bioactivity for TCP-containing fibres (mass gain: 18%, 2 days, HAp deposition). Bone regeneration was quantitatively investigated by creating four circular non-critical-size calvarial defects in New Zealand White rabbits. The defects were filled with the easy applicable cottonwool-like PLGA/TCP fibres or PLGA alone. Porous bovine-derived mineral (Bio-Oss) was used as a positive control and cavities left empty served as a negative control. The area fraction of newly formed bone (4 weeks implantation) was significantly increased for TCP-containing fibres compared to pure PLGA (histological and micro-computed tomographic analysis). A spongiosa-like structure of the newly formed bone tissue was observed for PLGA/TCP nanocomposites, whereas Bio-Oss-treated defects afforded a solid cortical bone.

Comparison of nanoscale and microscale bioactive glass on the properties of P(3HB)/Bioglass composites.

This study compares the effects of introducing micro (m-BG) and nanoscale (n-BG) bioactive glass particles on the various properties (thermal, mechanical and microstructural) of poly(3hydroxybutyrate) (P(3HB))/bioactive glass composite systems. P(3HB)/bioactive glass composite films with three different concentrations of m-BG and n-BG (10, 20 and 30 wt%, respectively) were prepared by a solvent casting technique. The addition of n-BG particles had a significant stiffening effect on the composites, modulus when compared with m-BG. However, there were no significant differences in the thermal properties of the composites due to the addition of n-BG and m-BG particles. The systematic addition of n-BG particles induced a nanostructured topography on the surface of the composites, which was not visible by SEM in m-BG composites. This surface effect induced by n-BG particles considerably improved the total protein adsorption on the n-BG composites compared to the unfilled polymer and the m-BG composites. A short term in vitro degradation (30 days) study in simulated body fluid (SBF) showed a high level of bioactivity as well as higher water absorption for the P(3HB)/n-BG composites. Furthermore, a cell proliferation study using MG-63 cells demonstrated the good biocompatibility of both types of P(3HB)/bioactive glass composite systems. The results of this investigation confirm that the addition of nanosized bioactive glass particles had a more significant effect on the mechanical and structural properties of a composite system in comparison with microparticles, as well as enhancing protein adsorption, two desirable effects for the application of the composites in tissue engineering.

Cotton wool-like nanocomposite biomaterials prepared by electrospinning: in vitro bioactivity and osteogenic differentiation of human mesenchymal stem cells.

The present study evaluates the in vitro biomedical performance of an electrospun, flexible, and cotton wool-like poly(lactide-co-glycolide) (PLGA)/amorphous tricalcium phosphate (ATCP) nanocomposite. Experiments on in vitro biomineralization, applicability in model defects and a cell culture study with human mesenchymal stem cells (hMSC) allowed assessing the application of the material for potential use as a bone graft. Scaffolds with different flame made ATCP nanoparticle loadings were prepared by electrospinning of a PLGA-based composite. Immersion in simulated body fluid showed significant deposition of a hydroxyapatite layer only on the surface of ATCP doped PLGA (up to 175% mass gain within 15 days for PLGA/ATCP 60:40). Proliferation and osteogenic differentiation of hMSC on different nanocomposites were assessed by incubating cells in osteogenic medium for 4 weeks. Proper adhesion and an unaffected morphology of the cells were observed by confocal laser scanning microscopy for all samples. Fluorometric quantification of dsDNA and analysis of ALP activity revealed no significant difference between the tested scaffolds and excluded any acute cytotoxic effects of the nanoparticles. The osteocalcin content for all scaffolds was 0.12-0.19 ng/ng DNA confirming osteogenic differentiation of human mesenchymal stem cells on these flexible bone implants.

Remineralization of human dentin using ultrafine bioactive glass particles.

Bioactive glass nanoparticles synthesized by flame spray synthesis were tested for their remineralization capabilities in vitro. After artificial demineralization with EDTA, human dentin was treated with 20-50nm size bioactive glass nanoparticles or a micrometer-sized, commercial reference material (PerioGlas) for up to 30 days. The degree of remineralization was measured using quantitative gravimetric methods (thermogravimetry, elemental analysis) and element-sensitive scanning electron microscopy imaging to detect new mineral precipitated on or within the demineralized tooth matrix. After treatment with bioactive glass nanoparticles for 10 or 30 days a pronounced increase in mineral content of the dentin samples suggested a rapid remineralization. The mechanical properties of the remineralized dentin samples were well below the stability of natural dentin. It is suggested that this lack of mechanical reconstitution may be attributed to an imperfect arrangement of the newly deposited mineral within the demineralized tooth matrix. Nevertheless, the substantially higher remineralization rate induced by nanometer-sized vs. micrometric bioactive glass particles corroborated the importance of particle size in clinical bioglass applications.

Inorganic nanoparticles for transfection of mammalian cells and removal of viruses from aqueous solutions.

Owing to their small size, synthetic nanoparticles show unprecedented biophysical and biochemical properties which may foster novel advances in life-science research. Using flame-spray synthesis technology we have produced non-coated aluminum-, calcium-, cerium-, and zirconium-derived inorganic metal oxide nanoparticles which not only exhibit high affinity for nucleic acids, but can sequester such compounds from aqueous solution. This non-covalent DNA-binding capacity was successfully used to transiently transfect a variety of mammalian cells including human, reaching transfection efficiencies which compared favorably with classic calcium phosphate precipitation (CaP) procedures and lipofection. In this straightforward protocol, transfection was enabled by simply mixing nanoparticles with DNA in solution prior to addition to the target cell population. Transiently transfected cells showed higher production levels of the human secreted glycoprotein SEAP compared to isogenic populations transfected with established technologies. Inorganic metal oxide nanoparticles also showed a high binding capacity to human-pathogenic viruses including adenovirus, adeno-associated virus and human immunodeficiency virus type 1 and were able to clear these pathogens from aqueous solutions. The DNA transfection and viral clearance capacities of inorganic metal oxide nanoparticles may provide cost-effective biopharmaceutical manufacturing and water treatment in developing countries.

Comparison of amorphous TCP nanoparticles to micron-sized alpha-TCP as starting materials for calcium phosphate cements.

The development of degradable bone cements with a mineral composition similar to natural bone was investigated using highly reactive calcium phosphate phases as starting materials. Mixtures of XRD-amorphous, glassy tricalcium phosphate (amorphous-TCP) nanoparticles of 25-60 nm size and micron sized, milled alpha-TCP were set by hydration with sodium phosphate buffer and investigated for possible application as single component calcium phosphate cements (CPCs). Isothermal calorimetry allowed a precise tracking of the setting process. Amorphous-TCP nanoparticles converted into calcium deficient hydroxyapatite with cement setting times below 12 min. The total energy release by the material during hardening corroborated the importance of high specific surface area and phase composition, that is, amorphous state of the nanometric starting material as repeatedly suggested earlier. The phase composition of the resulting CPCs was characterized by X-ray diffraction before and after setting. The morphology was investigated by nitrogen adsorption, scanning, and transmission electron microscopy and revealed the formation of highly porous calcium deficient hydroxyapatite with specific surface areas of up to 160 m(2) g(-1) after setting. In contrast to the very fast reaction time and highest specific surface area, the mechanical stability of the resulting CPC is still insufficient and requires further improvement.

In vitro cytotoxicity of oxide nanoparticles: comparison to asbestos, silica, and the effect of particle solubility.

Early indicators for nanoparticle-derived adverse health effects should provide a relative measure for cytotoxicity of nanomaterials in comparison to existing toxicological data. We have therefore evaluated a human mesothelioma and a rodent fibroblast cell line for in vitro cytotoxicity tests using seven industrially important nanoparticles. Their response in terms of metabolic activity and cell proliferation of cultures exposed to 0-30 ppm nanoparticles (microg g(-1)) was compared to the effects of nontoxic amorphous silica and toxic crocidolite asbestos. Solubility was found to strongly influence the cytotoxic response. The results further revealed a nanoparticle-specific cytotoxic mechanism for uncoated iron oxide and partial detoxification or recovery after treatment with zirconia, ceria, or titania. While in vitro experiments may never replace in vivo studies, the relatively simple cytotoxic tests provide a readily available pre-screening method.

Glass and bioglass nanopowders by flame synthesis.

The preparation of amorphous nanopowders by flame synthesis opens access to common soda-lime, metal-doped glasses or bioglasses in the range of 20-80 nm and offers an alternative to conventional wet-phase preparation, solid state reactions or melting.

Oxide nanoparticle uptake in human lung fibroblasts: effects of particle size, agglomeration, and diffusion at low concentrations.

Quantitative studies on the uptake of nanoparticles into biological systems should consider simultaneous agglomeration, sedimentation, and diffusion at physiologically relevant concentrations to assess the corresponding risks of nanomaterials to human health. In this paper, the transport and uptake of industrially important cerium oxide nanoparticles, into human lung fibroblasts is measured in vitro after exposing thoroughly characterized particle suspensions to a fibroblast cell culture for particles of four separate size fractions and concentrations ranging from 100 ng g(-1) to 100 microg g(-1) of fluid (100 ppb to 100 ppm). The unexpected findings at such low but physiologically relevant concentrations reveal a strong dependence of the amount of incorporated ceria on particle size, while nanoparticle number density or total particle surface area are of minor importance. These findings can be explained on the basis of a purely physical model. The rapid formation of agglomerates in the liquid is strongly favored for small particles due to a high number density while larger ones stay mainly unagglomerated. Diffusion (size fraction 25-50 nm) or sedimentation (size fraction 250-500 nm) limits the transport of nanoparticles to the fibroblast cells. The biological uptake processes on the surface of the cell are faster than the physical transport to the cell at such low concentrations. Comparison of the colloid stability of a series of oxide nanoparticles reveals that untreated oxide suspensions rapidly agglomerate in biological fluids and allows the conclusion thatthe presented transport and uptake kinetics at low concentrations may be extended to other industrially relevant materials.