Computer-assisted 3D reconstruction of serial sections of cortical bone to determine the 3D structure of osteons.

The objective of this study was to create three-dimensional (3D) images for the histomorphological study of osteons. Medical imaging technology was used to register digitized 2D images of serial decalcified histological sections of bone, to segment the tissues of interest from the surrounding tissues, and to create 3D reconstructions from the segmented structures. Examination of the 3D reconstructions did not support suggestions in the literature that osteons have a spiraling organization. In contrast, the 3D reconstructions indicated that osteons have a complex pattern of organization that is dominated by branching. Examination of the reconstructions also suggested that osteons described in the literature as being dumbbell shaped are actually artifacts of the plane of sectioning. This study demonstrated the applicability of imaging and visualization technology developed for the 3D reconstruction of medical images to the reconstruction of digitized 2D images of serial sections of bone and additionally demonstrated the feasibility of using 3D reconstructions for the histomorphological study of osteons.

Comparison of reliability of manual and computer-intensive methods for radiodensity measures of alveolar bone loss.

OBJECTIVE: To compare the reliability of radiodensity measurements made from dental radiographs with manual and a novel computer-intensive methods. METHODS: As part of a prospective study of postmenopausal women, a series of seven vertical bitewing radiographs were taken of 36 patients. One of each set of radiographs was repeated. The original and the corresponding duplicate radiographs were used in this study. Radiographs were digitized at 50 microns spatial resolution and 12-bit gray-scale resolution. For the Manual Method, original and duplicate radiographs were manually cropped to improve image homology, histogram matched and mean pixel gray-scale values determined for an alveolar bone ROI within each image. For the computer-intensive method, images were put into registration with ANALYZE software (Mayo Foundation, Rochester, MINN, USA), cropped automatically, histogram matched and color-coded on the basis of the per cent difference. Alveolar bone ROIs adjacent to clinical crowns and root surfaces whose color code indicated less than a 5% change were sampled. Method error (ME) and the coefficient of variation of method error (CVME) were calculated. RESULTS: With the Manual Method the SD between original and duplicate measures was 95.21 out of 4096 gray scale values; ME = 67.32; CVME = 3.78%. For the computer-intensive method, the corresponding values were 54.74, 38.71, and 2.29%. CONCLUSIONS: The new computer-intensive method resulted in a 40% improvement over the Manual Method in the precision of radiodensity measurements.

Below-knee residual limb shape change measurement and visualization.

OBJECTIVE: The ability to measure and visualize shape change (deformation) of a residual limb within and between prostheses is an important step toward improved prosthetic fit assessment. The objective was to develop measurement and visualization methods for below-knee residual limb soft tissue shape change after donning and loading a prosthesis to detect small shape changes (30mm or less). DESIGN: Spiral X-ray computed tomography imaging was utilized to acquire 3D volumetric data of the below-knee residual limb and prosthesis in situ from poor- and a good-fitting prostheses without and with a load. A new sum projection depth-shaded cylindrical mapping technique to measure and visualize small changes in shape was developed. From the volumetric data, the relative displacement of small lead markers placed on the residual limb's skin surface were measured using multiplanar reconstruction images and cylindrical maps. Displacement measurements averaging 15mm or less were obtained. RESULTS: The precision and accuracy was 1mm and 2mm, respectively, when measuring the shape change or deformation of the skin surface from the sum projection cylindrical maps. The skin surface deformation was at least 7mm or greater when comparing marker locations between scans with the prostheses in situ. CONCLUSION: These new image-based measurement and visualization methods provide a feasible means for measuring and displaying lower extremity residual limb shape change within and between different prostheses with and without loading.

Endocranial capacity in an early hominid cranium from Sterkfontein, South Africa.

Two- and three-dimensional computer imaging shows that endocranial capacity in an approximately 2.8- to 2.6-million-year-old early hominid cranium (Stw 505) from Sterkfontein, South Africa, tentatively assigned to Australopithecus africanus, is approximately 515 cubic centimeters. Although this is the largest endocranial capacity recorded for this species, it is still markedly less than anecdotal reports of endocranial capacity exceeding 600 cubic centimeters. No australopithecine has an endocranial capacity approaching, let alone exceeding, 600 cubic centimeters. Some currently accepted estimates of early hominid endocranial capacity may be inflated, suggesting that the tempo and mode of early hominid brain evolution may need reevaluation.

Stereological MRI volumetry of the frontal lobe.

Stereology was used to measure frontal lobe volume on magnetic resonance imaging (MRI) scans in a multi-observer repeated-measures trial in 17 adults. Prior to measurement, MR image volumes were reoriented into coronal sections perpendicular to the bicommissural plane. Three observers blinded to subject identify repeatedly used fixed grid stereology to estimate frontal lobe volumes, defined as all sections of the frontal lobe anterior to the anterior commissure. The lateral ventricles were excluded. Stereological measurement yielded high repeatability and precision, and was time efficient for the raters. The coefficient of error was 0.03. The inter-rater correlation coefficient = 0.95 for three raters; intra-rater correlation coefficients = 0.95-0.98. A comparison was made between stereological and traditional edge tracing measurement of the frontal lobe volumes. The overall correlation between the two methods was 0.95. The use of internal landmarks to define orientation and 3-D orthogonal views to define frontal lobe boundaries on 3-D images was critical to obtaining repeatable measurements. Frontal lobe volumetry by brain MR used to estimate small differences postulated to occur in certain psychiatric and neurologic disorders requires high precision and repeatability. Stereology, a semi-automated method, can reliably estimate frontal lobe volumes. This method may distinguish small frontal lobe volume differences within individuals and between groups.

Bitewing-based alveolar bone densitometry: digital imaging resolution requirements.

The resolution requirements were determined for detection of incremental alveolar bone loss from digitized Ektaspeed radiographs. Ten clinical radiographs were examined with a calibrated optical microscope to measure the smallest feature of interest discernible for alveolar bone. Images of trabeculae > 100 microns in diameter could be identified, but smaller ones could not be resolved. The Nyquist Criterion requires sampling with 50 microns (or smaller) pixels to measure such features. Numerous 25 microns Ag aggregates were present. Fifty microns resolution is a practical compromise between noise level and feature resolution. In another example of 10 bitewings digitized at 8 bit grey scale, about half the available range was used for alveolar bone, resulting in uncertainty, over a range of 2 optical density (OD) units, of about 1.42% at the average OD for alveolar bone (1.1). With the same radiographs digitized at 12 bit resolution, over 2000 of 4096 grey scales were used with a corresponding uncertainty of about 0.09%. Twelve-bit precision was also able to resolve smaller increments in an aluminium stepwedge than was 8 bit precision. Twelve-bit grey scale and 50 microns spatial resolution are recommended for alveolar bone densitometry performed with Ektaspeed radiographs.

Quantitative three-dimensional assessment of face-lift with an optical facial surface scanner.

Three-dimensional computed tomographic scan images of facial deformities provide information that has been useful in planning and evaluating therapy. However, the benefits of computed tomographic imaging in cosmetic plastic surgery are often insufficient to justify exposing the patient to radiation. This report describes application of an optical, noncontact, three-dimensional surface digitizer with subsecond scanning time for 360-degree examination of the human head. The resultant three-dimensional surface data are suitable for computer graphics display and manipulation, and for noncontact skin surface measurement. The scanner provides accurate and complete coverage of complex facial surfaces. This system was applied to digitization of the human head in the planning and evaluation of facial plastic surgery. The results indicate that the resulting image is accurate enough to detect subtle dimensional changes resulting from surgery, including postoperative edema and surface changes due to face-lift. This type of scanning can assist in a number of tasks performed by plastic surgeons, including collecting anthropomorphic measurements, preoperative and postoperative assessment, volume monitoring, customizing of implants, and interactive planning.

Brain surface cortical sulcal lengths: quantification with three-dimensional MR imaging.

The repeatability and accuracy of brain surface cortical sulcal length measurements obtained with three-dimensional (3D) reconstructions of volumetric, gradient-echo magnetic resonance (MR) images were tested. The brains of eight healthy adult volunteers and one cadaver were imaged in both the coronal and sagittal planes to yield a set of 128 1.5-2.0-mm-thick contiguous sections. 3D reconstructions of the brain cerebral cortical surfaces were obtained with computer software. Location and distance measurements of surface sulci were repeated on each reconstructed image. The same structures in the cadaver brain were independently measured with a 3D electromagnetic digitizer to validate the results of the 3D MR imaging method. All measurements from reconstructed images had high repeatability, and there were no statistically significant differences between measurement trials. The accuracy of measurements with 3D MR imaging was also good; the mean difference between digitizer and 3D MR measurements for sulcal lengths was 0.81 cm (average, 5.45-12.9 cm).

Relationship of a hiatal hernia to the function of the body of the esophagus and the gastroesophageal junction.

One hundred two patients referred to our Esophageal Function Laboratory without endoscopic evidence of esophagitis were divided into two groups on the basis of the presence of a hiatal hernia on endoscopic examination. Fifty-three patients had a hiatal hernia and 49 did not. Both groups and 30 normal volunteer subjects had esophageal manometry and 24 hour esophageal pH monitoring. The incompetency of the cardia in patients with a hiatal hernia was dependent upon loss of components responsible for the antireflux mechanism, mainly a decrease in distal esophageal sphincter pressure and a decrease in the length of the sphincter exposed to the positive-pressure environment of the abdomen. These deficiencies were not related to the presence of a hiatal hernia and were similar to those of patients with an incompetent cardia without a hiatal hernia. Patients with a hiatal hernia and an incompetent cardia had significantly more esophageal exposure to refluxed acid than without a hiatal hernia. On the basis of the number of reflux episodes that lasted 5 minutes or longer and radioisotope transit studies, this increased acid exposure was due to both a loss of competency of the cardia and poor esophageal clearance secondary to the presence of a hiatal hernia. Reduction of the hernia and anchoring the distal esophagus into the abdomen not only may improve the antireflux mechanism, but corrects the clearance abnormality as well. The presence of a hiatal hernia has a detrimental effect on the clearance function of the body of the esophagus and may aggravate the effects of gastroesophageal reflux due to an incompetent cardia.