Supercontinuum generation in a graded-index multimode tellurite fiber.

We report the generation of a broadband supercontinuum (SC) from 790 to 2900 nm in a tellurite graded-index (GRIN) multimode fiber with a nanostructured core. We study the SC dynamics in different dispersion regimes and observe near-single-mode spatial intensity distribution at high input energy values. Numerical simulations of the (3 + 1)D generalized nonlinear Schrödinger equation are in good agreement with our experiments. Our results open a new avenue for the generation of high-power mid-infrared SC sources in soft-glass fibers.

Free-Form Optical Fiber with a Square Mode and Top-Hat Intensity Distribution.

The development of bend-induced effectively single-mode fiber with a square cross-section and flat top-hat intensity distribution is reported using core topology nanostructuring dedicated to femtosecond laser ablation systems. The fiber's core comprises 5419 silica and germanium-doped silica nanorods with a diameter of 430 nm each arranged into a hexagonal lattice. The distribution of the rods is calculated using in-house developed code based on the Monte Carlo algorithm to obtain a target shape of mode and intensity distribution. As a proof-of-concept, a silica nanostructured fiber with a 24 µm core is developed and verified against the purity of mode guidance, bending, and guiding losses. It is shown that for a wavelength of 1030 nm, the fiber is effectively single-mode with 96% mode purity when bending with a radius of 20 cm is applied. The fiber has a measured mode area of 360 µm2, numerical aperture of 0.03, and total losses of 0.07 dB m-1.

Enhancing resolution and contrast in fibre bundle-based fluorescence microscopy using generative adversarial network.

Fibre bundle (FB)-based endoscopes are indispensable in biology and medical science due to their minimally invasive nature. However, resolution and contrast for fluorescence imaging are limited due to characteristic features of the FBs, such as low numerical aperture (NA) and individual fibre core sizes. In this study, we improved the resolution and contrast of sample fluorescence images acquired using in-house fabricated high-NA FBs by utilising generative adversarial networks (GANs). In order to train our deep learning model, we built an FB-based multifocal structured illumination microscope (MSIM) based on a digital micromirror device (DMD) which improves the resolution and the contrast substantially compared to basic FB-based fluorescence microscopes. After network training, the GAN model, employing image-to-image translation techniques, effectively transformed wide-field images into high-resolution MSIM images without the need for any additional optical hardware. The results demonstrated that GAN-generated outputs significantly enhanced both contrast and resolution compared to the original wide-field images. These findings highlight the potential of GAN-based models trained using MSIM data to enhance resolution and contrast in wide-field imaging for fibre bundle-based fluorescence microscopy. Lay Description: Fibre bundle (FB) endoscopes are essential in biology and medicine but suffer from limited resolution and contrast for fluorescence imaging. Here we improved these limitations using high-NA FBs and generative adversarial networks (GANs). We trained a GAN model with data from an FB-based multifocal structured illumination microscope (MSIM) to enhance resolution and contrast without additional optical hardware. Results showed significant enhancement in contrast and resolution, showcasing the potential of GAN-based models for fibre bundle-based fluorescence microscopy.

P T-symmetry breaking in dual-core phosphate-glass photonic crystal fibers.

We investigate the properties of a soft glass dual-core photonic crystal fiber for application in multicore waveguiding with balanced gain and loss. Its base material is a phosphate glass in a P2O5-Al2O3-Yb2O3-BaO-ZnO-MgO-Na2O oxide system. The separated gain and loss cores are realized with two cores with ytterbium and copper doping of the base phosphate glass. The ytterbium-doped core supports a laser (gain) activity under excitation with a pump at 1000 nm wavelength, while the CuO-doped is responsible for strong attenuation at the same wavelength. We establish conditions for an exact balance between gain and loss and investigate pulse propagation by solving a system of coupled generalized nonlinear Schrödinger equations. We predict two states of light under excitation with hyperbolic secant pulses centered at 1000 nm: 1) linear oscillation of the pulse energy between gain and loss core (P T-symmetry state), with strong power attenuation; 2) retention of the pulse in the excited gain core (broken P T-symmetry), with very modest attenuation. The optimal pulse energy levels were identified to be 100 pJ (first state) and 430 pJ (second state).

Analysis of high-contrast all-optical dual-wavelength switching in asymmetric dual-core fibers.

We systematically present experimental and theoretical results for the dual-wavelength switching of 1560 nm, 75 fs signal pulses (SPs) driven by 1030 nm, and 270 fs control pulses (CPs) in a dual-core fiber (DCF). We demonstrate a switching contrast of 31.9 dB, corresponding to a propagation distance of 14 mm, achieved by launching temporally synchronized SP-CP pairs into the fast core of the DCF with moderate inter-core asymmetry. Our analysis employs a system of three coupled propagation equations to identify the compensation of the asymmetry by nonlinearity as the physical mechanism behind the efficient switching performance.

All-fiber tunable devices based on high-index photonic crystal fibers filled with liquid crystals.

In this paper we present all-in fiber tunable devices based on specially designed and optimized high-index photonic crystal fibers filled with nematic liquid crystals. A special host microstructured optical fibers have been designed and manufactured to ensure low-loss index guiding and mode field diameter matching to SMF-28 fiber, ensuring low losses on interconnections with leading in-out FC/PC connectorized pigtails. We present four types of tunable all-fiber devices: tunable retarders with tuning range as high as 20 λ, tunable polarizers with variable axis of polarization and continuously tunable polarization dependent losses, tunable and fully controllable polarization controller and finally indeterministic depolarizer in which depolarization is caused by random thermodynamic process. We also present a cost-effective method to achieve change in the direction of the steering electric field, which was controlled by custom-made programable controllers. Finally, we present a method for effective packaging for the proposed devices.

Broadband optical vortex beam generation using flat-surface nanostructured gradient index vortex phase masks.

We developed a new kind of compact flat-surface nanostructured gradient index vortex phase mask, for the effective generation of optical vortex beams in broadband infrared wavelength range. A low-cost nanotechnological material method was employed for this work. The binary structure component consists of 17,557 nano-sized rods made of two lead-bismuth-gallium silicate glasses which were developed in-house. Those small rods are spatially arranged in such a way that, according to effective medium theory, the refractive index of this internal structure is constant in the radial direction and linearly changes following azimuthal angle. Numerical results demonstrated that a nanostructured vortex phase mask with a thickness of 19 µm can convert Gaussian beams into fundamental optical vortices over 290 nm wavelength bandwidth from 1275 to 1565 nm. This has been confirmed in experiments using three diode laser sources operating at 1310, 1550, and 1565 nm. The generation of vortex beams is verified through their uniform doughnut-like intensity distributions, clear astigmatic transformation patterns, and spiral as well as fork-like interferograms. This new flat-surface component can be directly mounted to an optical fiber tip for simplifying vortex generator systems as well as easier manipulation of the generated OVB in three-dimensional space.

Polarization dynamics of vector solitons in a fiber laser.

We investigate the polarization dynamics of vector solitons in a fiber laser mode-locked by a saturable absorber (SA). Three types of vector solitons were obtained in the laser, including group velocity locked vector solitons (GVLVS), polarization locked vector solitons (PLVS), and polarization rotation locked vector solitons (PRLVS). Their polarization evolution during intracavity propagation is discussed. Pure vector solitons are obtained from the continuous wave (CW) background by soliton distillation, and the characteristics of the vector solitons without and with distillation are analyzed, respectively. Numerical simulations suggest that the features of vector solitons in a fiber laser could be assemble to those generated in fibers.

Quasi-periodic spectro-temporal pulse breathing in a femtosecond-pumped tellurite graded-index multimode fiber.

We report on the multidimensional characterization of femtosecond pulse nonlinear dynamics in a tellurite glass graded-index multimode fiber. We observed novel multimode dynamics of a quasi-periodic pulse breathing which manifests as a recurrent spectral and temporal compression and elongation enabled by an input power change. This effect can be assigned to the power dependent modification of the distribution of excited modes, which in turn modifies the efficiency of involved nonlinear effects. Our results provide indirect evidence of periodic nonlinear mode coupling occurring in graded-index multimode fibers thanks to the modal four-wave-mixing phase-matched via Kerr-induced dynamic index grating.

Characterization of sidebands in fiber lasers based on nonlinear Fourier transformation.

Phase evolution of soliton and that of first-order sidebands in a fiber laser are investigated by using nonlinear Fourier transform (NFT). Development from dip-type sidebands to peak-type (Kelly) sidebands is presented. The phase relationship between the soliton and the sidebands calculated by the NFT are in good agreement with the average soliton theory. Our results suggest that NFT can be an effective tool for the analysis of laser pulses.

Novel Design and Application of High-NA Fiber Imaging Bundles for In Vivo Brain Imaging with Two-Photon Scanning Fluorescence Microscopy.

Here, we provide experimental verification supporting the use of short-section imaging bundles for two-photon microscopy imaging of the mouse brain. The 8 mm long bundle is made of a pair of heavy-metal oxide glasses with a refractive index contrast of 0.38 to ensure a high numerical aperture NA = 1.15. The bundle is composed of 825 multimode cores, ordered in a hexagonal lattice with a pixel size of 14 µm and a total diameter of 914 µm. We demonstrate successful imaging through custom-made bundles with 14 µm resolution. As the input, we used a 910 nm Ti-sapphire laser with 140 fs pulse and a peak power of 9 × 104 W. The excitation beam and fluorescent image were transferred through the fiber imaging bundle. As test samples, we used 1 µm green fluorescent latex beads, ex vivo hippocampal neurons expressing green fluorescent protein and cortical neurons in vivo expressing the fluorescent reporter GCaMP6s or immediate early gene Fos fluorescent reporter. This system can be used for minimal-invasive in vivo imaging of the cerebral cortex, hippocampus, or deep brain areas as a part of a tabletop system or an implantable setup. It is a low-cost solution, easy to integrate and operate for high-throughput experiments.

Highly sensitive methane detection using a mid-infrared interband cascade laser and an anti-resonant hollow-core fiber.

For over a decade hollow-core fibers have been used in optical gas sensors in the role of gas cells. However, very few examples of actual real-life applications of those sensors have been demonstrated so far. In this paper, we present a highly-sensitive hollow-core fiber based methane sensor. Mid-infrared distributed feedback interband cascade laser operating near 3.27 µm is used to detect gas inside anti-resonant hollow-core fiber. R(3) line near 3057.71 cm-1 located in ν3 band of methane is targeted. Compact, lens-free optical setup with an all-silica negative curvature hollow-core fiber as the gas cell is demonstrated. Using wavelength modulation spectroscopy and 7.5-m-long fiber the detection limit as low as 1.54 ppbv (at 20 s) is obtained. The demonstrated system is applied for a week-long continuous monitoring of ambient methane and water vapor in atmospheric air at ground level. Diurnal cycles in methane concentrations are observed, what proves the sensor's usability in environmental monitoring.

Development of pedestal-free large mode area fibers withTm3+ doped silica nanostructured core.

We present the pedestal-free thulium doped silica fiber with a large nanostructured core optimized for fiber lasers. The fiber is composed of over 6 thousand thulium doped silica nanorods with a diameter of 71 nm each which form a nanostructured step-index core. We study the influence of non-continuous distribution in nanoscale active areas on gain, beam quality, and fiber laser performance. The proof-of-concept fiber is effectively single mode for wavelength above 1.8 µm. We demonstrate the performance of the fiber in a laser setup pumped at 792 nm. Single mode laser emission with a slope efficiency of 29% at quasi-continuous output power of 4 W with M2 = 1.3 at the emission spectrum 1880-1925 nm is achieved.

Transmission of an optical vortex beam in antiresonant fibers generated in an all-fiber system.

We report an experimental study on transmission of orbital angular momentum mode in antiresonant fibers generated with a dedicated all-fiber optical vortex phase mask. The vortex generator can convert Gaussian beam into vortex beams with topological charge l = 1. Generated vortex beam is directly butt-coupled into the antiresonant fiber and propagates over distance of 150 cm. The stability and sensitivity of the transmitted vortex beam on the external perturbations including bending, axial stress, and twisting is investigated. We demonstrate distortion-free vortex propagation for the axial stress force below 0.677 N, a bend radius greater than 10 cm.

Optimization of the nanostructured weakly coupled few-mode fiber for mode-division-multiplexed systems.

The objective of the study is to optimize the optical fiber structure for mode-division multiplexing systems using nanostructurization. The nanostructuring technique allows to fabricate fibers with arbitrarily designed (free-form) refractive index distribution based on two glasses. Three optimization schemes have been proposed. The nanostructuring method allows for designing fibers with optical properties similar and even better parameters impossible to produce by other methods. In this proposal, we examined four linearly polarized (LP) few-mode fibers. We report a high effective refractive index difference between modes while maintaining other important parameters for the weakly coupled approach.

A Gaussian to Vector Vortex Beam Generator with a Programmable State of Polarization.

We study an optical device designed for converting the polarized Gaussian beam into an optical vortex of tunable polarization. The proposed device comprised a set of three specially prepared nematic liquid crystal cells and a nano-spherical phase plate fabricated from two types of glass nanotubes. This device generates a high-quality optical vortex possessing one of the multiple polarization states from the uniformly polarized input Gaussian beam. Its small size, simplicity of operation, and electrical steering can be easily integrated into the laboratory and industrial systems, making it a promising alternative to passive vortex retarders and spatial light modulators.

Magnetically sensitive fiber probe with nitrogen-vacancy center nanodiamonds integrated in a suspended core.

Efficient collection of photoluminescence arising from spin dynamics of nitrogen vacancy (NV) centers in diamond is important for practical applications involving precise magnetic field or temperature mapping. These goals may be realized by the integration of nanodiamond particles with optical fibers and volumetric doping of the particles alongside the fiber core. That approach combines the advantages of robust axial fixation of NV diamonds with a direct spatial overlap of their fluorescence with the guided mode of the fiber. We developed a suspended core silicate glass fiber with 750 nm-diameter nanodiamonds located centrally in the 1.5 µm-core cross-section along its axis. The developed fiber probe was tested for its magnetic sensing performance in optically detected magnetic resonance measurements using a 24 cm-long fiber sample, with the NV excitation and fluorescence collection from the far ends of the sample and yielding optical readout contrast of 7% resulting in 0.5 µT·Hz-1/2 magnetic field sensitivity, two orders of magnitude better than in earlier designs. Thanks to its improved fluorescence confinement, the developed probe could find application in magnetic sensing over extended fiber length, magnetic field mapping or gradiometry.

Noise in supercontinuum generated using PM and non-PM tellurite glass all-normal dispersion fibers.

Intensity fluctuations in supercontinuum generation are studied in polarization-maintaining (PM) and non-PM all-normal dispersion tellurite photonic crystal fibers. Dispersive Fourier transformation is used to resolve the shot-to-shot spectra generated using 225-fs pump pulses at 1.55 µm, with experimental results well reproduced by vector and scalar numerical simulations. By comparing the relative intensity noise for the PM and non-PM cases, supported by simulations, we demonstrate the advantage of the polarization-maintaining property of the PM fibers in preserving low-noise dynamics. We associate the low-noise in the PM case with the suppression of polarization modulation instability.

Two octave supercontinuum generation in a non-silica graded-index multimode fiber.

The generation of a two-octave supercontinuum from the visible to mid-infrared (700-2800 nm) in a non-silica graded-index multimode fiber is reported. The fiber design is based on a nanostructured core comprised of two types of drawn lead-bismuth-gallate glass rods with different refractive indices. This yields an effective parabolic index profile and ten times increased nonlinearity when compared to silica fibers. Using femtosecond pulse pumping at wavelengths in both normal and anomalous dispersion regimes, a detailed study is carried out into the supercontinuum generating mechanisms and instabilities seeded by periodic self-imaging. Significantly, suitable injection conditions in the high power regime are found to result in the output beam profile showing clear signatures of beam self-cleaning from nonlinear mode mixing. Experimental observations are interpreted using spatio-temporal 3+1D numerical simulations of the generalized nonlinear Schrödinger equation, and simulated spectra are in excellent agreement with experiment over the full two-octave spectral bandwidth. Experimental comparison with the generation of supercontinuum in a silica graded-index multimode fiber shows that the enhanced nonlinear refractive index of the lead-bismuth-gallate fiber yields a spectrum with a significantly larger bandwidth. These results demonstrate a new pathway towards the generation of bright, ultrabroadband light sources in the mid-infrared.

Heat treatment and fiber drawing effect on the luminescence properties of RE-doped optical fibers (RE = Yb, Tm, Ho).

We investigate the influence of various optical fiber fabrication processes on the fluorescence decay of RE ions commonly used in fiber lasers and amplifiers, i.e. Yb3+, Tm3+ and Ho3+. Optical fiber preforms were prepared using the MCVD method combined with Al2O3 nanoparticle doping and subjected to subsequent heat treatment processes such as preform elongation and fiber drawing. The fluorescence decay of RE ions was measured in multiple stages of optical fiber preparation: in an original preform, in an elongated preform (cane), in a standard fiber, and in an overcladded fiber. It was found that heat treatment processing of the preforms generally leads to a faster fluorescence decay, which can be explained by the diffusion of dopants and clustering of RE ions. The fiber drawing exhibited a greater effect compared to preform elongation, which was ascribed to a faster cooling rate of the process. In general, the heat treatment of RE-doped silica glass preforms leads to the decline of fluorescence decay.