Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Animals (Basel) ; 13(7)2023 Mar 24.
Artigo em Inglês | MEDLINE | ID: mdl-37048409

RESUMO

Recent short-term studies on Murciano-Granadina goats have established that the optimal parameters to set up the milking machines are different according to the milk pipes height. Two groups of 52 fresh goats each were employed in 2 different experiments to confirm during an entire lactation period the best combinations of system vacuum pulsation rate and pulsator ratio in low-line and mid-line milking parlours. The experiment performed in the low-line milking parlour included one group milked with 40 KPa vacuum system level, 90 puls/min pulsation rate and 60/40 pulsation and a second group milked with 38 KPa vacuum system level, 90 puls/min pulsation rate and 60/40 pulsation ratio. The experiment carried out in mid-line included one group milked with 40 KPa vacuum system level, 90 puls/min pulsation rate and 60/40 pulsation ratio and a second group milked with 40 KPa vacuum system level, 120 puls/min pulsation rate and 60/40 pulsation ratio. Variables studied included milking efficiency, milk composition, cortisol, SCC and intramammary infections, teat-end oedema after milking and vacuum dynamics during milking. Considering the results of an entire lactation period, it was confirmed that when milking in mid-line, the combination of 40 KPa system vacuum, 90 cycles/min pulsation rate and 60/40 pulsator ratio showed optimal results of the above-mentioned variables. On the other hand, the use of 40 KPa in a low-line system increased the milk cortisol values (0.34 ± 0.1 vs. 0.44 ± 0.1 ng/mL) without any other advantage. Thus, the recommendation is to use a combination of 38 KPa system vacuum, 90 cycles/min pulsation rate and 60/40 pulsator ratio to enhance animal welfare.

2.
Animals (Basel) ; 14(1)2023 Dec 27.
Artigo em Inglês | MEDLINE | ID: mdl-38200829

RESUMO

Non-contact devices have been used in the measurement of body temperature in livestock production as a tool for testing disease in different species. However, there are few studies about the variation and correlations in body temperature between rectal temperature (RT) and non-contact devices such as non-contact infrared thermometers (NCIT) and thermal imaging/infrared thermography (IRT). The objective of this work was to evaluate the accuracy of non-contact devices to measure the body temperature in sheep, considering six body regions and the possibility of implementing these systems in herd management. The experiment was carried out at the experimental farm of the Catholic University of Valencia, located in the municipality of Massanassa in July of 2021, with 72 dry manchega ewes, and we compared the rectal temperature with two types of non-contact infrared devices for the assessment of body temperature in healthy sheep. Except for the temperature taken by NCIT at the muzzle, the correlation between RT vs. NCIT or IRT showed a low significance or was difficult to use for practical flock management purposes. In addition, the variability between devices was high, which implies that measurements should be interpreted with caution in warm climates and open pens, such as most sheep farms in the Spanish Mediterranean area. The use of infrared cameras devices to assess body temperature may have a promising future, but in order to be widely applied as a routine management method on farms, the system needs to become cheaper, simpler in terms of measurements and quicker in terms of analyzing results.

3.
Animals (Basel) ; 11(1)2021 Jan 08.
Artigo em Inglês | MEDLINE | ID: mdl-33429914

RESUMO

Experiments carried out in dairy cows show that mechanical stimulation prior to milking offers a good release of oxytocin without involving changes in milk yield or a reduction of the milking time. The objective of the present study was to evaluate the effect of automatic prestimulation on milk fractioning, milking duration and milk flows, teat-end status, and vacuum levels at the short milk tubes and in the pulsation tubes of dairy goats. With this aim, three experiments in Latin square design were developed employing goats in different moments of the lactation: one of them at the onset of lactation, one at mid-lactation, and the last at the end of lactation. Two treatments were tested: milking with a mechanical prestimulation of 300 ppm for a 20-s period and milking without prestimulation. Results showed that prestimulation at the end of lactation showed slightly lower average milk flow (kg/min) values (0.53 ± 0.02 vs. 0.60 ± 0.02; p = 0.03) and lower maximum vacuum level values (Kpa) in the pulsation tubes (27.08 ± 0.15 vs. 39.48 ± 0.25; p < 0.01). No other differences were found in the variables related to milking efficiency or teat-end status in the three experiments carried out.

4.
Animals (Basel) ; 12(1)2021 Dec 25.
Artigo em Inglês | MEDLINE | ID: mdl-35011146

RESUMO

The Murciano-Granadina goat breed has been described as a slow milking breed. As milking machine parameters can affect milk extraction in terms of yield and time employed, two experiments of one-month duration were performed with 88 goats in Latin square design to find the best combination of these parameters. One of them was carried out in a mid-line milking machine and one in a low-line milking machine. For each of them, two vacuum levels (36 and 40 kPa), two pulsation rates (90 and 120 cycles/min) and two pulsator ratios (50 and 60%) were used and milking efficiency, sanitary status of the mammary gland, milk cortisol, and teat end status were evaluated. Results showed that in milking machines installed in mid- and low-line, the use of 40 kPa system vacuum, 60% pulsator ratio and 90 or 120 cycles/min pulsation rate achieved optimum milking fractioning and efficiency. In the case of low-level milking machines, a similar combination with 36 kPa not only showed worse milking fractioning values, but also provided better values of teat end status and cortisol level.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...