Unleashing the power of boron: enhancing nitrogen reduction reaction through defective ReS2 monolayers.

Density functional theory (DFT) calculations were utilized to investigate the electrocatalytic potential of single boron (B) atom doping in defective ReS2 monolayers as an active site. Our investigation revealed that B-doped defective ReS2, containing S and S-Re-S defects, demonstrated remarkable conductivity, and emerged as an exceptionally active catalyst for nitrogen reduction reactions (NRR), exhibiting limiting potentials of 0.63 and 0.53 V, respectively. For both cases, we determined the potential by examining the hydrogenation of adsorbed N2* to N2H*. Although the competing hydrogen evolution reaction (HER) process appeared dominant in the S-Re-S defect case, its impact was minimal. The outstanding NRR performance can be ascribed to the robust chemical interactions between B and N atoms. The adsorption of N2 on B weakens the N-N bond, thereby facilitating the formation of NH3. Moreover, we verified the selectivity and stability of the catalysts for NRR. Our findings indicate that B-doped defective ReS2 monolayers hold considerable promise for electrocatalysis in a variety of applications.

Highly Efficient Van Der Waals Heterojunction on Graphdiyne toward the High-Performance Photodetector.

Graphdiyne (GDY), a new 2D material, has recently proven excellent performance in photodetector applications due to its direct bandgap and high mobility. Different from the zero-gap of graphene, these preeminent properties made GDY emerge as a rising star for solving the bottleneck of graphene-based inefficient heterojunction. Herein, a highly effective graphdiyne/molybdenum (GDY/MoS2 ) type-II heterojunction in a charge separation is reported toward a high-performance photodetector. Characterized by robust electron repulsion of alkyne-rich skeleton, the GDY based junction facilitates the effective electron-hole pairs separation and transfer. This results in significant suppression of Auger recombination up to six times at the GDY/MoS2 interface compared with the pristine materials owing to an ultrafast hot hole transfer from MoS2 to GDY. GDY/MoS2 device demonstrates notable photovoltaic behavior with a short-circuit current of -1.3 × 10-5 A and a large open-circuit voltage of 0.23 V under visible irradiation. As a positive-charge-attracting magnet, under illumination, alkyne-rich framework induces positive photogating effect on the neighboring MoS2 , further enhancing photocurrent. Consequently, the device exhibits broadband detection (453-1064 nm) with a maximum responsivity of 78.5 A W-1 and a high speed of 50 µs. Results open up a new promising strategy using GDY toward effective junction for future optoelectronic applications.

A new mode of luminescence in lanthanide oxalates metal-organic frameworks.

Two lanthanide metal-organic frameworks [Ln-MOFs, Ln = Eu(III), Tb(III)] composed of oxalic acid and Ln building units were hydrothermally synthesized and fully characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Furthermore, their magnetic susceptibility measurements were obtained using SQUID based vibrating sample magnetometer (MPMS 3, Quantum Design). Both Ln-MOFs exhibited highly efficient luminescent property. Solid-state photoluminescence (PL) measurements revealed phosphorescence emission bands of Eu-MOF and Tb-MOF centered at 618 nm (red emission) and 550 nm (green emission) upon excitation at 396 nm and 285 nm, respectively. Eu-MOF and Tb-MOF displayed a phosphorescence quantum yield of 53% and 40%, respectively. Time-resolved PL analyses showed very long lifetime values, at 600 and 1065 ± 1 µs for Eu-MOF and Tb-MOF, respectively. Calculations performed by density functional theory indicated a charge transfer form metal centres to the ligand which was in good agreement with the experimental studies. Therefore, this new mode of highly photoluminescent MOF materials is studied for the first time which paves the way for better understanding of these systems for potential applications.

Unveiling the Protonation Kinetics-Dependent Selectivity in Nitrogen Electroreduction: Achieving 75.05 % Selectivity.

While higher selectivity of nitrogen reduction reaction (NRR) to ammonia (NH3 ) is always achieved in alkali, the selectivity dependence on nitrogen (N2 ) protonation and mechanisms therein are unrevealed. Herein, we profile how the NRR selectivity theoretically relies upon the first protonation that is collectively regulated by proton (H) abundance and adsorption-desorption, along with intermediate-*NNH formation. By incorporating electronic metal modulators (M=Co, Ni, Cu, Zn) in nitrogenase-imitated model-iron polysulfide (FeSx), a series of FeMSx catalysts with tailorable protonation kinetics are obtained. The key intermediates behaviors traced by in situ FT-IR and Raman spectroscopy and operando electrochemical impedance spectroscopy demonstrate the strong protonation kinetics-dependent selectivity that mathematically follows a log-linear Bradley curve. Strikingly, FeCuSx exhibits a record-high selectivity of 75.05 % at -0.1 V (vs. RHE) for NH3 production in 0.1 M KOH electrolyte.

Moving beyond bimetallic-alloy to single-atom dimer atomic-interface for all-pH hydrogen evolution.

Single-atom-catalysts (SACs) afford a fascinating activity with respect to other nanomaterials for hydrogen evolution reaction (HER), yet the simplicity of single-atom center limits its further modification and utilization. Obtaining bimetallic single-atom-dimer (SAD) structures can reform the electronic structure of SACs with added atomic-level synergistic effect, further improving HER kinetics beyond SACs. However, the synthesis and identification of such SAD structure remains conceptually challenging. Herein, systematic first-principle screening reveals that the synergistic interaction at the NiCo-SAD atomic interface can upshift the d-band center, thereby, facilitate rapid water-dissociation and optimal proton adsorption, accelerating alkaline/acidic HER kinetics. Inspired by theoretical predictions, we develop a facile strategy to obtain NiCo-SAD on N-doped carbon (NiCo-SAD-NC) via in-situ trapping of metal ions followed by pyrolysis with precisely controlled N-moieties. X-ray absorption spectroscopy indicates the emergence of Ni-Co coordination at the atomic-level. The obtained NiCo-SAD-NC exhibits exceptional pH-universal HER-activity, demanding only 54.7 and 61 mV overpotentials at -10 mA cm-2 in acidic and alkaline media, respectively. This work provides a facile synthetic strategy for SAD catalysts and sheds light on the fundamentals of structure-activity relationships for future applications.

Revealing well-defined cluster-supported bi-atom catalysts for enhanced CO2 electroreduction: a theoretical investigation.

It remains a great challenge to explore high-performance electrocatalysts for the CO2 reduction reaction (CO2RR) with high activity and selectivity. Herein, we employ first principles calculations to systematically investigate an emerging family of extended surface catalysts, bi-atom catalysts (BACs), in which bimetals anchored on graphitic carbon nitride (g-CN), for the CO2RR; and propose a novel framework to boost the CO2RR via incorporation with well-defined clusters. Among 28 BACs, five candidates (Cr2, CrFe, Mn2, MnFe and Fe2/g-CN) are first selected with efficient CO2 activation and favorability for CO2 reduction over H2 evolution. Fe2@g-CN is then served as a superior electrocatalyst for the CO2RR with low limiting potentials (UL) of -0.58 and -0.54 V towards C1 and C2 products. Intriguingly, the CO2RR performance of pure Fe2@g-CN could be controlled by tunable Fe atomic cluster integration. In particular, the presence of an Fe13 cluster could strengthen the CO2 adsorption, effectively deactivate H, and intriguingly break the adsorbate (CO* and CHO*) scaling relation to achieve the distinguished CO2RR with a lowered UL to -0.45 V for the C1 mechanism, which is attributed to the exceptional charge redistribution of bimetals modulated by Fe13. Our findings might open up possibilities for the rational design of BACs towards the CO2RR and other reactions.

Reaction probability and kinetics of water splitting on the penta-NiAs2 monolayer from an ab initio molecular dynamics investigation.

The reaction probability and kinetics of the water splitting process on the penta-NiAs2 monolayer are studied using ab initio molecular dynamics simulations. A total of 100 trajectories are investigated, in which a H2O molecule is set to strike the surface with a translational energy of 1 eV or 2 eV. The results show that the NiAs2 monolayer is an excellent candidate for the activation of water splitting with a reaction probability of 94% for both energy levels. Interestingly, the kinetics of two O-H dissociation stages varies greatly with respect to the inletting translational energy. Interpreting the reaction data for the 1 eV case, we conclude that O-H1 and O-H2 dissociations are first-order processes. However, such dissociation steps become pseudo-zeroth order in the 2 eV case. At the time of the dissociation, the force acting on atoms and the principal component analysis suggest that the two OH breaking stages behave like harmonic springs until reaching the dissociation.

Phase-Selective Disordered Anatase/Ordered Rutile Interface System for Visible-Light-Driven, Metal-Free CO2 Reduction.

Visible-light-driven photocatalytic CO2 reduction using TiO2 that can absorb light of all wavelengths has been sought for over half a century. Herein, we report a phase-selective disordered anatase/ordered rutile interface system for visible-light-driven, metal-free CO2 reduction using a narrow band structure, whose conduction band position matches well with the reduction potential of CO2 to CH4 and CO. A mixed disordered anatase/ordered rutile (Ad/Ro) TiO2 was prepared from anatase and rutile phase-mixed P25 TiO2 at room temperature and under an ambient atmosphere in sodium alkyl amine solutions. The Ad/Ro TiO2 showed a narrow band structure due to multi-internal energy band gaps of Ti3+ defect sites in the disordered anatase phase, leading to high visible light absorption and simultaneously providing fast charge separation through the crystalline rutile phase, which was faster than that of pristine P25 TiO2. The band gap of Ad/Ro TiO2 is 2.62 eV with a conduction band of -0.27 eV, which matches well with the reduction potential of -0.24 VNHE of CO2/CH4, leading to effective electron transfer to CO2. As a result, the Ad/Ro TiO2 provided the highest CH4 production (3.983 µmol/(g h)), which is higher than that of even metal (W, Ru, Ag, and Pt)-doped P25, for CO2 reduction under visible light.

Atomistic observation of the collision and migration of Li on MoSe2 and WS2 surfaces through ab initio molecular dynamics.

We present in this study a theoretical investigation of the collision of Li with the MX2 surface (MoSe2 or WS2) by employing the Born-Oppenheimer molecular dynamics (MD) approach. In each trajectory, atomic Li is fired toward the two-dimensional monolayer with an inletting kinetic energy of 0.2 eV or 2.0 eV and a chosen striking angle. In total, 84 MD trajectories are analyzed. We observe that Li has a high tendency to migrate on WS2 in most investigated cases (20/21 cases at 0.2 eV inletting kinetic energy and 21/21 cases at 2.0 eV inletting kinetic energy), while the migration probability on MoSe2 is much lower (only 5/21 cases with the inletting kinetic energy of 0.2 eV and 15/21 cases with the inletting kinetic energy of 2.0 eV). Interestingly, our finding shows that the migration probability does not depend on the binding energies of Li-MoSe2 (1.61 eV) and Li-WS2 (1.77 eV), but it is in good agreement with the nudged-elastic-band prediction of migration barriers. In fact, it is the intensity of elastic vibration of the transition metal dichalcogenide layer that plays a very significant role in the migration of Li. During the collision process, Li is able to absorb energy from the layer vibration to jump out from one X-X-X trap to another. Consequently, with the assistance from intensive vibration of WS2, Li would possess higher migration probability on the layer surface. Finally, electronic structure analysis on various interacting Li-MX2 configurations is performed. From Bader charge estimation, we observe that WS2 tends to establish more charge transferability with Li. Moreover, when Li approaches closer to the S/Se layer, the hybridization of Li-2s and Mo-4d (or W-5d) orbitals results in a magnetic moment (up to ∼1 µB).

Adjusting band gap and charge transfer of organometallic complex adsorbed on MoS2 monolayer using vertical electric-field: a first-principles investigation.

In this paper, we propose the use of benzene (Bz) to cover the active site on top of a transition metal atom (Cr/Mn/Fe) adsorbed on the MoS2 monolayer. Stable configurations of adatom on the MoS2 surface were predicted using first-principles calculations and their electronic, magnetic properties were investigated. In addition, the influence of vertical electric field on the electronic band structures of the systems was carefully examined. Analyzing the adsorption energies of transition metals given by the PBE calculations, we found that the benzene molecule stabilized the binding of Cr and Mn on the MoS2 surface, but destabilized the Fe binding by approximately 33% of adsorption energy. The attachment of benzene caused modifications on the total magnetizations of the Cr-MoS2 and Mn-MoS2 structures. The Bz-Mn@MoS2 structure was found to exhibit half-metallicity with 100% spin polarization at the Fermi level. The influence of various degrees of vertical electric field was shown to produce a tensile stress, which altered the lattice parameters and led to band gap narrowing and dramatic shifts of the Fermi level.

A first-principles investigation of various gas (CO, H2O, NO, and O2) absorptions on a WS2 monolayer: stability and electronic properties.

Using first-principles calculations, we investigate the interactions between a WS2 monolayer and several gas molecules (CO, H2O, NO, and O2). Different sets of calculations are performed based on generalized-gradient approximations (GGAs) and GGA + U ([Formula: see text] eV) calculations with D2 dispersion corrections. In general, GGA and GGA + U establish good consistency with each other in terms of absorption stability and band gap estimations. Van der Waals density functional (vdW-DF) calculations are also performed to validate long-range gas molecule-WS2 monolayer interactions, and the resultant absorption energies of four gas-absorption cases (from 0.21 to 0.25 eV) are significantly larger than those obtained from calculations using empirical D2 corrections (from 0.11 to 0.19 eV). The reported absorption energies clearly indicate van der Waals interactions between the WS2 monolayer and gas molecules. The NO and O2 absorptions are shown to narrow the band gaps of the WS2 material to 0.75-0.95 eV and produce small magnetic moments (0.71 µB and 1.62 µB, respectively). Moreover, these two gas molecules also possess good charge transferability to WS2. This observation is important for NO- and O2-sensing applications on the WS2 surface. Interestingly, WS2 can also activate the dissociation of O2 with an estimated barrier of 2.23 eV.