Fabrication of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Fibers Using Centrifugal Fiber Spinning: Structure, Properties and Application Potential.

Biobased and biodegradable polyhydroxyalkanoates (PHAs) are currently gaining momentum. Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) polymer has a useful processing window for extrusion and injection molding of packaging, agricultural and fishery applications with required flexibility. Processing PHBHHx into fibers using electrospinning or centrifugal fiber spinning (CFS) can further broaden the application area, although CFS remains rather unexplored. In this study, PHBHHx fibers are centrifugally spun from 4-12 wt.% polymer/chloroform solutions. Beads and beads-on-a-string (BOAS) fibrous structures with an average diameter (ϕav) between 0.5 and 1.6 µm form at 4-8 wt.% polymer concentrations, while more continuous fibers (ϕav = 3.6-4.6 µm) with few beads form at 10-12 wt.% polymer concentrations. This change is correlated with increased solution viscosity and enhanced mechanical properties of the fiber mats (strength, stiffness and elongation values range between 1.2-9.4 MPa, 11-93 MPa, and 102-188%, respectively), though the crystallinity degree of the fibers remains constant (33.0-34.3%). In addition, PHBHHx fibers are shown to anneal at 160 °C in a hot press into 10-20 µm compact top-layers on PHBHHx film substrates. We conclude that CFS is a promising novel processing technique for the production of PHBHHx fibers with tunable morphology and properties. Subsequent thermal post-processing as a barrier or active substrate top-layer offers new application potential.

Characterizing Mechanical, Heat Seal, and Gas Barrier Performance of Biodegradable Films to Determine Food Packaging Applications.

In an organic circular economy, biodegradable materials can be used as food packaging, and at end-of-life their carbon atoms can be recovered for soil enrichment after composting, so that new food or materials can be produced. Packaging functionality, such as mechanical, gas barrier, and heat-seal performance, of emerging biodegradable packaging, with a laminated, coated, monomaterial, and/or blended structure, is not yet well known in the food industry. This lack of knowledge, in addition to end-of-life concerns, high cost, and production limits is one of the main bottlenecks for broad implementation in the food industry. This study determines application areas of 10 films with a pragmatic approach based on an experimental broad characterization of packaging functionality. As a conclusion, the potential application of these materials is discussed with respect to industrial settings and food and consumer requirements, to support the implementation of commercially available, biodegradable, and, more specifically, compostable, materials for the identified food applications.

Extrusion and Injection Molding of Poly(3-Hydroxybutyrate-co-3-Hydroxyhexanoate) (PHBHHx): Influence of Processing Conditions on Mechanical Properties and Microstructure.

Biobased and biodegradable polyhydroxyalkanoates (PHAs) have great potential as sustainable packaging materials. However, improvements in their processing and mechanical properties are necessary. In this work, the influence of melt processing conditions on the mechanical properties and microstructure of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) is examined using a full factorial design of experiments (DoE) approach. We have found that strict control over processing temperature, mold temperature, screw speed, and cooling time leads to highly increased elongation at break values, mainly under influence of higher mold temperatures at 80 °C. Increased elongation of the moldings is attributed to relaxation and decreased orientation of the polymer chains together with a homogeneous microstructure at slower cooling rates. Based on the statistically substantiated models to determine the optimal processing conditions and their effects on microstructure variation and mechanical properties of PHBHHx samples, we conclude that optimizing the processing of this biopolymer can improve the applicability of the material and extend its scope in the realm of flexible packaging applications.

Screen Printed Antennas on Fiber-Based Substrates for Sustainable HF RFID Assisted E-Fulfilment Smart Packaging.

Intelligent packaging is an emerging technology, aiming to improve the standard communication function of packaging. Radio frequency identification (RFID) assisted smart packaging is of high interest, but the uptake is limited as the market needs cost-efficient and sustainable applications. The integration of screen printed antennas and RFID chips as smart labels in reusable cardboard packaging could offer a solution. Although paper is an interesting and recyclable material, printing on this substrate is challenging as the ink conductivity is highly influenced by the paper properties. In this study, the best paper/functional silver ink combinations were first selected out of 76 paper substrates based on the paper surface roughness, air permeance, sheet resistance and SEM characterization. Next, a flexible high frequency RFID chip (13.56 MHz) was connected on top of screen printed antennas with a conductive adhesive. Functional RFID labels were integrated in cardboard packaging and its potential application as reusable smart box for third party logistics was tested. In parallel, a web-based software application mimicking its functional abilities in the logistic cycle was developed. This multidisciplinary approach to developing an easy-scalable screen printed antenna and RFID-assisted smart packaging application is a good example for future implementation of hybrid electronics in sustainable smart packaging.

Holistic Approach to a Successful Market Implementation of Active and Intelligent Food Packaging.

Market implementation of active and intelligent packaging (AIP) technologies specifically for fiber-based food packaging can be hindered by various factors. This paper highlights those from a social, economic, environmental, and legislative point of view, and elaborates upon the following aspects mainly related to interactions among food packaging value chain stakeholders: (i) market drivers that affect developments, (ii) the gap between science and industry, (iii) the gap between legislation and practice, (iv) cooperation between the producing stakeholders within the value chain, and (v) the gap between the industry and consumers. We perceive these as the most influential aspects in successful market implementation at a socioeconomic level. The findings are supported by results from quantitative studies analyzing consumer buying expectations about active and intelligent packaging (value perception of packaging functions, intentions to purchase AIP, and willingness to pay more) executed in 16 European countries. Finally, in this paper, we discuss approaches that could direct future activities in the field towards industrial implementation.

Oxygen Gas and UV Barrier Properties of Nano-ZnO-Coated PET and PHBHHx Materials Fabricated by Ultrasonic Spray-Coating Technique.

Ultrasonic spray-coating (USSC)-a wet chemical deposition method to deposit ultrathin (down to 20 nm) coatings-is being applied as a promising alternative deposition method for functional coatings due to an economical, simple, and precise coating process with easy control over its operating parameters. In this research, zinc oxide nanoparticles (ZnO NPs) were ultrasonically spray-coated on commercial-grade polyethylene terephthalate (PET) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) films. The most suitable parameters for the ink composition, the ultrasonic spray-coating process, and the number of coating passes (up to 50×) were selected on the basis of a series of experiments. The oxygen gas barrier properties in terms of the oxygen transmission rate (OTR) of neat PET, and 3×, 5×, 10×, and 50× ZnO NP-coated PET and PHBHHx substrates were investigated. The OTR values for neat PET, and 3×, 5×, and 10× ZnO NP-coated PET substrates were found to be the same; however, a 5% reduction in OTR for 50× ZnO NP-coated PET substrate was observed compared to the neat PET substrate. No reduction in OTR was found for any above number of coating passes on PHBHHx substrates against the neat PHBHHx substrate. However, the ultraviolet (UV) tests of 3×, 5×, and 10× ZnO NP-coated PET and PHBHH× substrates revealed a significant decrease in percentage transmission for 10× coated PET and PHBHHx substrates as compared to their 3× and 5× ZnO NP-coated substrates, respectively. It was revealed from the study that the 50× ZnO NP coating of the PET substrate created a slight difference in OTR as compared to the reference substrate. However, the ultrasonic spray-coating method created a significant UV barrier effect for 3×, 5×, and 10× ZnO NP-coated PET and PHBHHx substrates, which demonstrates that the optimized coating method cannot be used to create a high oxygen barrier but can certainly be applied for UV barrier applications in food packaging. It is concluded that ultrasonic spray deposition of ZnO NPs on PET and PHBHHx materials has shown promising results for UV barrier properties, demonstrating the advantages of using this method compared to other coating methods with regard to cost-effectiveness, precise coating, and better process control.

Inkjet Printing of PEDOT:PSS Based Conductive Patterns for 3D Forming Applications.

This paper presents the formulation, inkjet printing, and vacuum forming of a conductive and stretchable polymer, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), ink on a stretchable and transparent thermoplastic polyurethane (TPU) substrate. The formulation of the conductive and stretchable ink is achieved by combining PEDOT:PSS with additional solvents, to achieve the right inkjet properties for drop-on-demand (DoD) inkjet printing. A conductive pattern can be printed from the 21 µm orifice on a flexible and stretchable TPU substrate, with a linewidth down to 44 µm. The properties of the printed pattern, in terms of sheet resistance, morphology, transparency, impact of weather conditions, and stretching are investigated and show sheet resistances up to 45 Ohm/sq and transparencies as high as 95%, which is comparable to indium tin oxide (ITO). Moreover, in contrast to ITO, one-time stretching up to 40% can be achieved, increasing the sheet resistance up to 214 Ohm/sq only, showing the great potential of this ink for one-time stretching. Finally, as a proof of this one-time stretching, the printed samples are vacuum formed around a 3D object, still showing sufficient conductivity to be applied as a capacitive touch sensor.

Influence of Polymer Concentration and Nozzle Material on Centrifugal Fiber Spinning.

Centrifugal fiber spinning has recently emerged as a highly promising alternative technique for the production of nonwoven, ultrafine fiber mats. Due to its high production rate, it could provide a more technologically relevant fiber spinning technique than electrospinning. In this contribution, we examine the influence of polymer concentration and nozzle material on the centrifugal spinning process and the fiber morphology. We find that increasing the polymer concentration transforms the process from a beaded-fiber regime to a continuous-fiber regime. Furthermore, we find that not only fiber diameter is strongly concentration-dependent, but also the nozzle material plays a significant role, especially in the continuous-fiber regime. This was evaluated by the use of a polytetrafluoroethylene (PTFE) and an aluminum nozzle. We discuss the influence of polymer concentration on fiber morphology and show that the choice of nozzle material has a significant influence on the fiber diameter.

(Bio)polymer/ZnO Nanocomposites for Packaging Applications: A Review of Gas Barrier and Mechanical Properties.

Nanotechnology is playing a pivotal role in improving quality of life due to its versatile applications in many areas of research. In this regard, nanoparticles have gained significant importance. Zinc oxide nanoparticles (ZnO NPs) amongst other nanoparticles are being used in producing nanocomposites. Methods like solvent casting, solution casting, solvent volatilization, twin-screw extrusion, melt compounding and extrusion blow molding have been applied to produce ZnO NPs based (bio)polymer composites. These composites are of great interest in the research area of food packaging materials due to their improved multifunctional characteristics like their mechanical, barrier and antimicrobial properties. This paper gives an overview of the main methods to synthesize ZnO NPs, methods to incorporate ZnO NPs in (bio)polymers, and finally, the gas barrier and mechanical properties of the nanocomposites. As a conclusion, a maximum decline in oxygen, carbon dioxide and water vapor permeability was reported as 66%, 17% and 38% respectively, while tensile strength and young's modulus were observed to increase by 32% and 57% respectively, for different (bio)polymer/ZnO nanocomposites.

Synthesis and structure-activity relationship of benzetimide derivatives as human CXCR3 antagonists.

The synthesis and evaluation of benzetimide derivatives showing potent CXCR3 antagonism are described. Optimization of the screening hits led to the identification of more potent CXCR3 antagonists devoid of anti-cholinergic activity and identification of the key pharmacophore moieties of the series.

Pharmacological profile of JNJ-27141491 [(S)-3-[3,4-difluorophenyl)-propyl]-5-isoxazol-5-yl-2-thioxo-2,3-dihydro-1H-imidazole-4-carboxyl acid methyl ester], as a noncompetitive and orally active antagonist of the human chemokine receptor CCR2.

The interaction between CC chemokine receptor 2 (CCR2) with monocyte chemoattractant proteins, such as MCP-1, regulates the activation and recruitment of inflammatory leukocytes. In this study, we characterized (S)-3-[3,4-difluoro-phenyl)-propyl]-5-isoxazol-5-yl-2-thioxo-2,3-dihydro-1H-imidazole-4-carboxyl acid methyl ester (JNJ-27141491) as a noncompetitive and orally active functional antagonist of human (h)CCR2. JNJ-27141491 strongly suppressed hCCR2-mediated in vitro functions, such as MCP-1-induced guanosine 5'-O-(3-[(35)S]thio)triphosphate binding; MCP-1, -3, and -4-induced Ca(2+) mobilization; and leukocyte chemotaxis toward MCP-1 (IC(50) = 7-97 nM), whereas it had little or no effect on the function of other chemokine receptors tested. The inhibition of CCR2 function was both insurmountable and reversible, consistent with a noncompetitive mode of action. JNJ-27141491 blocked the binding of (125)I-MCP-1 to human monocytes (IC(50) = 0.4 microM), but it failed to affect MCP-1 binding to mouse, rat, and dog cells (IC(50) > 10 microM). Therefore, transgenic mice, in which the mouse (m)CCR2 gene was replaced by the human counterpart, were generated for in vivo testing. In these mice, oral administration of JNJ-27141491 dose-dependently [5-40 mg/kg q.d. (once daily) or b.i.d.] inhibited monocyte and neutrophil recruitment to the alveolar space 48 h after intratracheal mMCP-1/lipopolysaccharide instillation. Furthermore, treatment with JNJ-27141491 (20 mg/kg q.d.) significantly delayed the onset and temporarily reduced neurological signs in an experimental autoimmune encephalomyelitis model of multiple sclerosis. Taken together, these results identify JNJ-27141491 as a noncompetitive, functional antagonist of hCCR2, capable of exerting oral anti-inflammatory activity in transgenic hCCR2-expressing mice.

Design and optimization of aniline-substituted tetrahydroquinoline C5a receptor antagonists.

A series of aniline-substituted tetrahydroquinoline C5a receptor antagonists were discovered. A functionality requirement of ortho substitution on the aniline was revealed. Secondary anilines, in general, outperformed tertiary analogs in inhibition of C5a-induced calcium mobilization. Further enhancement of activity was realized in the presence of an ortho hydroxyalkyl side chain. The functional IC(50) of selected analogs was optimized to the single-digit nanomolar level.

Synthesis and characterization of 5,6,7,8-tetrahydroquinoline C5a receptor antagonists.

A novel series of substituted 2-aryl-5-amino-5,6,7,8-tetrahydroquinoline C5a receptor antagonists is reported. Synthetic routes were developed that allow the substituents on the tetrahydroquinoline core to be efficiently varied, facilitating determination of structure-activity relationships. Members of the series display high binding affinity for the C5a receptor and are potent functional antagonists.

Discovery of potent, orally bioavailable small-molecule inhibitors of the human CCR2 receptor.

We recently reported the discovery of a series of 2-thioimidazoles as CCR2 antagonists. The most potent molecules of this series, the 4,5-diesters, were rapidly hydrolyzed to the inactive acids and were found to be metabolically unstable. Herein we describe the synthesis of a number of analogues with heterocyclic bioisosteric replacements of the ester group(s). Small 5-membered heterocyclic substituents at the 4-position gave highly potent CCR2 antagonists. Hydrolysis of the 5-ester is diminished, thus imparting these compounds with sufficient stability and systemic exposure after oral administration to warrant further study of the in vivo pharmacology of these functional CCR2 inhibitors.

Leukemia inhibitory factor is produced by myelin-reactive T cells from multiple sclerosis patients and protects against tumor necrosis factor-alpha-induced oligodendrocyte apoptosis.

In multiple sclerosis (MS), damage to oligodendrocytes is believed to be caused by an aberrant immune response initiated by autoreactive T cells. Increasing evidence indicates that these T cells are not exclusively detrimental but might also exert protective effects. We report for the first time that myelin-reactive T-cell clones from eight MS patients (6/19) and five healthy controls (4/11) produce leukemia inhibitory factor (LIF), a member of the neuropoietic family of neurotrophins. In addition, T-cell clones specific for tetanus toxoid, CD4(+) and CD8(+) T cells, and monocytes, but not B cells, secreted LIF. LIF-producing T lymphocytes and macrophages were also identified immunohistochemically in both active and chronic-active MS lesions. We further demonstrated dose-dependent protective effects of LIF on tumor necrosis factor-alpha-induced apoptosis of oligodendrocytes. In conclusion, our data demonstrate that peripheral and CNS-infiltrating T cells from MS patients produce LIF, a protective factor for oligodendrocytes. This study emphasizes that secretion of LIF may contribute to the neuroprotective effects of autoreactive T cells.

2-Mercaptoimidazoles, a new class of potent CCR2 antagonists.

We describe the synthesis and SAR of a new class of CCR2 antagonists based on 2-mercaptoimidazole scaffold. The initial lead 1a was optimized to the 3,4-disubstituted analogues 1p-(S) and 1q-(S), which have IC(50) values in the MCP-1 induced Ca-flux below 0.01 microM.

Cytokine-induced cell death in human oligodendroglial cell lines: I. Synergistic effects of IFN-gamma and TNF-alpha on apoptosis.

Multiple sclerosis is a chronic inflammatory disease of the central nervous system. Myelin and oligodendrocytes are considered the major targets of injury caused by a cell-mediated immune response. There is circumstantial evidence that proinflammatory cytokines like tumor necrosis factor alpha (TNF-alpha) and interferon gamma (IFN-gamma) could have disease-promoting roles in multiple sclerosis (MS). In the present study, the cytotoxic effects of IFN-gamma and TNF-alpha on the human oligodendroglial cell lines human oligodendroglioma (HOG) and MO3.13 were analyzed. When the oligodendroglial cell lines were cultured in the presence of IFN-gamma or TNF-alpha, apoptotic cell death was observed in both cell lines after >24 hr incubation. Apoptosis was evidenced by a decrease in cell viability, apoptotic changes in cell and nucleus morphology, and disruption of the membrane asymmetry. Our data show that TNF-alpha and IFN-gamma induce apoptosis in a dose-dependent fashion in both oligodendroglial cell lines and that their synergistic effect results in enhanced cell death. Understanding the regulation of cell death pathways in oligodendrocytes is critical for protecting myelin-producing cells and their associated axons during injury in patients with MS.

Cytokine-induced cell death in human oligodendroglial cell lines. II: Alterations in gene expression induced by interferon-gamma and tumor necrosis factor-alpha.

Cytokines, such as interferon-gamma (IFN-gamma) and tumor necrosis factor-alpha (TNF-alpha), can initiate dual effects resulting in either cell growth or cell death. In this study, the human oligodendroglial cell lines HOG and MO3.13 were used as a model to study the molecular mechanisms of cytokine-induced cell death in human oligodendrocytes. We have previously shown that TNF-alpha and IFN-gamma induce apoptosis in both oligodendroglial cell lines within 72 hr. In the present study, the cell death pathways operating within these cells were further investigated at the gene expression level. Both cell lines express a broad repertoire of caspases and apoptosis-related genes. Some of these genes are specifically up-regulated by cytokine treatment; e.g., caspase-1 is up-regulated by IFN-gamma. In addition to direct cytotoxic effects, IFN-gamma and TNF-alpha also enhance the expression of Fas, TNFR1, and MHC class I molecules in both cell lines. This suggests that cytokines can make oligodendrocytes more vulnerable to different cell death pathways in an inflammatory environment. cDNA microarray analysis of the HOG cell line revealed that TNF-alpha induces genes that regulate apoptosis, survival, inflammation, cell metabolism, and cell signaling. The data suggest that oligodendroglial cells activate both death and survival pathways upon cytokine challenges. However, the survival pathways seem to be unable to compete with the death signal after more than 24 hr of cytokine treatment. These results may contribute to the development of therapeutic strategies aimed at interfering with cytokine-induced cell death of oligodendrocytes in patients with multiple sclerosis.

Interferon-gamma-induced calcium influx in T lymphocytes of multiple sclerosis and rheumatoid arthritis patients: a complementary mechanism for T cell activation?

Autoreactive T lymphocytes are considered to play a crucial role in orchestrating a chronic inflammation in the central nervous system (CNS) of multiple sclerosis (MS) patients and in the joints of rheumatoid arthritis (RA) patients. However, it has been suggested that the majority of T cells in the immune infiltrate are nonspecifically recruited into the CNS and into the inflamed joint. In addition, several lines of evidence suggest an important role for interferon-gamma (IFN-gamma) in the pathogenesis of MS and RA. We have studied whether peripheral blood T cells from patients with autoimmune diseases are more susceptible to activation in the presence of IFN-gamma. The results indicate that IFN-gamma mediates a sustained elevated [Ca(2+)](i) in T cells of (active) MS and RA patients as compared to healthy controls and patients with common viral infections. No [Ca(2+)](i) increase was observed in Ca(2+)-free medium, excluding an effect of IFN-gamma on Ca(2+)-release from intracellular stores. Although the IFN-gamma-activated Ca(2+)-influx is insufficient to induce T cell proliferation in vitro, our data indicate a significantly augmented proliferation in response to suboptimal doses of PHA in the presence of IFN-gamma. This study suggests that the IFN-gamma-induced Ca(2+)-influx can act as a complementary mechanism in the activation of blood T lymphocytes from MS and RA patients.

Immune-mediated oligodendrocyte injury in multiple sclerosis: molecular mechanisms and therapeutic interventions.

In this review, new insights into the immunopathogenesis of multiple sclerosis (MS) are discussed, with special focus on the potential mechanisms leading to neuroinflammation in MS--that is, the role of autoreactive T cells, infections, and neurodegenerative events. Oligodendrocytes are considered to be the target of autoimmune inflammation in the CNS of MS patients. Some important features of oligodendrocyte biology are discussed, together with the molecular mechanisms that are potentially involved in oligodendrocyte injury. These include injury mechanisms that might be executed by the adaptive and innate immune system, via cytokines and/or oligodendrocyte receptors, or as a consequence of nitrative and oxidative stress, and excitotoxicity. The mode of cell death of oligodendrocytes in MS is discussed, in addition to the mechanisms of axonal injury as observed in pathology- and imaging-based studies. Finally, recent progress in therapeutic strategies that may interfere with these pathological processes are reviewed, with a focus on repair strategies, such as gene therapy, antibody-mediated remyelination, and stem cell therapy.