RESUMO
We report the synthesis of a new conjugated polymer bearing crown ether moieties, poly[(N(1-aza-[18]crown-6)carbamido)thiophene-2,5-diyl-alt-1,4-phenylene] (BG2). In water, BG2 forms a dispersion with a slightly cloudy appearance. We have studied the effect of adding surfactants, with different polar head groups, on these polymer-polymer aggregates. Special attention is given to the system with the anionic surfactant, sodium dodecyl sulfate (SDS). The combination of photophysical techniques with electrical conductivity, NMR (1H, 13C, and 27Na), DFT calculations, molecular dynamics simulations, and small-angle neutron scattering (SANS) provides a detailed picture on the behavior of the SDS/BG2 system in aqueous solution and in thin films. NMR, electric conductivity, and DFT results suggest that hydrophilic interactions occur between the polar headgroup of the surfactant (OSO3- Na+) and the aza-[18]-crown-6 moiety. DFT calculations confirmed the capability of BG2 to form stable complexes with the Na+ cations, where the cation can be either inside the azacrown cavity or sandwiched between the cavity and the polymer chain, which seem to determine the position of the surfactant hydrocarbon chain and, therefore, be responsible for the disruption of the BG2 aggregates and subsequent increase in the photoluminescence quantum yields. SANS measurements, made with hydrogenated and deuterated SDS in D2O, clearly show how micron-sized aggregates of BG2 are broken down by SDS and then how BG2 becomes preferentially incorporated within joint colloidal particles of BG2 and SDS with increasing [SDS]/[BG2] molar ratio.
RESUMO
Following previous studies on the complexation in aqueous solutions of 8-hydroxyquinoline-5-sulfonate (8-HQS) with the trivalent metal ions, Al(III) and Ga(III) and various other metal ions, using multinuclear NMR, DFT calculations, UV-vis absorption and luminescence techniques, we have extended our studies on 8-HQS complexation to the trivalent metal ion In(III). The study combines the high sensitivity of luminescence techniques and the selectivity of multinuclear NMR spectroscopy with the structural details accessible through DFT calculations, and aims to obtain a complete understanding of the complexation between the In3+ metal ion and 8-HQS, and how this influences the luminescence behaviour. A full speciation study has been performed and, as has been reported for the complexes of 8-hydroxyquinoline (8-HQ), the dominant complexes of 8-HQS with In(III) show marked differences in the complexation behaviour when compared with the equivalent complexes with the other group 13 cations Al(III) and Ga(III). While all three complexes have a 1 : 3 (metal : ligand) stoichiometry, those with Al(III) and Ga(III) show a mer-geometry of the ligands around the metal centre, whereas the fac-geometry is observed for the complexes with In(III). On binding to metal ions, 8-HQS shows a marked increase in the intensity of the fluorescence emission band compared to that of the virtually non-luminescent free ligand. However, the increase for In(III) is less pronounced than with Al(III) or Ga(III). These observations have important implications for the application of the complexes in sensing, light emitting devices (e.g. OLEDs), or as electron transport layers in photovoltaics for solar energy conversion. Furthermore, surfactant complexation is known to improve the fluorescence intensity in metal complexes with 8-HQS, by inhibiting the ligand exchange, as we have reported for complexes of HQS with Al(III) and Ga(III). Accordingly, in view of the development of applications in either sensing or optoelectronics, our interest also includes the study of HQS complexes of In(III) in the presence of cationic surfactants, in comparison with previous results with Al(III) and Ga(III).
RESUMO
Amino-acyl-quinoxalinone yellow dyes are cyclised analogues of the yellow azomethine dyes developed for, and still used in, silver halide colour photography. Unlike image azomethine dyes, which are rapidly deactivated in their excited states by torsion about the azomethine bond, amino-acyl-quinoxalinone dyes have an interesting photophysics because torsion is not possible due to their cyclised structure. We report results from studies on singlet and triplet state properties, and singlet oxygen yields, of the yellow dye, 7-diethylamino-3-(2,2-dimethyl-propionyl)-5-methyl-1-phenyl-1H-quinoxalin-2-one, in polar and nonpolar solvents. The dye photophysics is characterised by a weak fluorescence, with a solvent dependent emission yield (ΦF ≈ 0.002-0.004), and short singlet state lifetime (τexpt ≈ 20-50 ps), both increasing by a factor of ≈2 in going from polar acetonitrile to non-polar dioxane as solvent. DFT ZINDO calculations show a transition involving significant electron transfer from the diethyl-amino group into the carbonyl region of the molecule. In solution, in the presence of oxygen, the triplet state decays almost exclusively by oxygen quenching, and singlet oxygen is produced in high yield (Φ∆ ≈ 0.5-0.55). The triplet state absorbs across the 450-750 nm region with maxima around 480 and 650 nm, and moderate molar absorption coefficients (ca. 6000-8000 M-1 cm-1). In a glass at 77 K, triplet decay gives a red phosphorescence, with λmax ≈ 640-650 nm, and a ≈ 0.25 s lifetime. If singlet oxygen yields are a good indication of triplet yields, then internal conversion and intersystem crossing occur with roughly equal efficiency.
RESUMO
The large-scale use of pesticides is one of the main causes of the dramatic degradation of our environment. Pesticides such as imidacloprid (IMID) have been linked to declines in bee health and toxicity to other beneficial insects. They pose a threat to human health due to their persistence in the environment and accumulation in the food chain. Therefore, it is essential to test possible environmentally-friendly solutions for their elimination. The present study evaluates the efficiency of microalgae Nannochloropsis sp. for the removal of IMID from synthetic wastewater. The influence of aeration, light, and the presence of UV radiation on the degradation of IMID were factors considered in the study. A rapid RP-HPLC method was developed and validated for the analysis and quantification of IMID in the context of bioremediation with microalgae. Nannochloropsis sp. removed 4.39 µg mL-1 from an initial content of 9.59 µg mL-1 (reaching approximately 50%) of IMID in the first 20 h. This study demonstrated that the removal of IMID by the marine microalgae Nannochloropsis sp. is both effective and light-dependent.
Assuntos
Microalgas , Estramenópilas , Animais , Abelhas , Cromatografia Líquida de Alta Pressão , Neonicotinoides , Nitrocompostos , Águas Residuárias , ÁguaRESUMO
A rapid reverse phase high-performance liquid chromatography (RP-HPLC) method was developed and validated for the simultaneous quantification of paracetamol, ibuprofen, olanzapine, simvastatin and simvastatin acid in the context of microalgae bioremediation. The method was validated according to the guidelines of the US Food and Drug Administration (FDA), the International Conference on Harmonization (ICH), and Eurachem with respect to system suitability, linearity, accuracy, precision, recovery, limits of detection and quantification, ruggedness, selectivity and specificity. The estimated limits of detection and quantification were, respectively, 0.03 and 0.10 µg mL-1 for paracetamol, 0.03 and 0.09 µg mL-1 for ibuprofen, 0.04 and 0.13 µg mL-1 for olanzapine, 0.27 and 0.83 µg mL-1 for simvastantin, and 0.05 and 0.14 µg mL-1 for simvastantin acid. The inter-day and intra-day precision results were within the acceptance limit of relative standard deviation (%RSD) of less than 2, and the percentage recovery was found to be within the required limits of 80-110%. The developed method is rapid, linear, precise, robust and accurate, and has been successfully applied to the determination of the above common pharmaceutical products during microalgae bioremediation.
RESUMO
The photophysical properties of Eu3+ and Tb3+ complexes of DOTAGA and DO3A-monoamide conjugates of the Pittsburgh compound B (PiB) chromophore, prepared using linkers of different lengths and flexibilities, and which form stable negatively charged (LnL1), and uncharged (LnL2) complexes, respectively, were studied as potential probes for optical detection of amyloid aggregates. The phenylbenzothiazole (PiB) moiety absorbs light at wavelengths longer than 330 nm with a high molar absorption coefficient in both probes, and acts as an antenna in these systems. The presence of the luminescent Ln3+ ion quenches the excited states of PiB through an energy transfer process from the triplet state of PiB to the metal centre, and structured emission is seen from Eu3+ and Tb3+. The luminescence study indicates the presence of a 5D4 â T1 back transfer process in the Tb3+ complexes. It also provides insights on structural properties of the Eu3+ complexes, such as the high symmetry environment of the Eu3+ ion in a single macrocyclic conformation and the presence of one water molecule in its inner coordination sphere. The overall quantum yield of luminescence of EuL1 is higher than for EuL2. However, their low values reflect the low overall sensitization efficiency of the energy transfer process, which is a consequence of the large distances between the metal center and the antenna, especially in the EuL2 complex. DFT calculations confirmed that the most stable conformation of the Eu3+ complexes involves a combination of a square antiprismatic (SAP) geometry of the chelate and an extended conformation of the linker. The large calculated average distances between the metal center and the antenna point to the predominance of the Förster energy transfer mechanism, especially for EuL2. This study provides insights into the behavior of amyloid-targeted Ln3+ complexes as optical probes, and contributes towards their rational design.
Assuntos
Peptídeos beta-Amiloides/química , Compostos de Anilina/química , Quelantes/química , Elementos da Série dos Lantanídeos/química , Substâncias Luminescentes/química , Medições Luminescentes , Agregados Proteicos , Tiazóis/química , Teoria da Densidade Funcional , Humanos , Estrutura Molecular , Imagem Óptica , Processos FotoquímicosRESUMO
Pharmaceuticals and their metabolites are released into the environment by domestic, hospital, and pharmaceutical industry wastewaters. Conventional wastewater treatment technology does not guarantee effluents of high quality, and apparently clean water may be loaded with pollutants. In this study, we assess the performance and efficiency of free and immobilised cells of microalgae Nannochloropsis sp. in removing four pharmaceuticals, chosen for their occurrence or persistence in the environment. These are paracetamol, ibuprofen, olanzapine and simvastatin. The results showed that free microalgae cells remain alive for a longer time than the immobilised ones, suggesting the inhibition of cell proliferation by the polymeric matrix polyvinyl alcohol. Both cells, free and immobilised, respond differently to each pharmaceutical. The removal of paracetamol and ibuprofen by Nannochloropsis sp., after 24 h of culture, was significantly higher in immobilised cells. Free cells removed a significantly higher concentration of olanzapine than immobilised ones, suggesting a higher affinity to this molecule than to paracetamol and ibuprofen. The results demonstrate the effectiveness of Nannochloropsis sp. free cells for removing olanzapine and Nannochloropsis sp. immobilised cells for removing paracetamol and ibuprofen.
Assuntos
Biodegradação Ambiental , Microalgas/metabolismo , Preparações Farmacêuticas/metabolismo , Poluentes Químicos da Água/metabolismo , Acetaminofen/metabolismo , Células Imobilizadas/química , Células Imobilizadas/metabolismo , Disruptores Endócrinos/metabolismo , Ibuprofeno/metabolismo , Microalgas/química , Microalgas/crescimento & desenvolvimento , Preparações Farmacêuticas/química , Álcool de Polivinil/química , Sinvastatina/metabolismo , Poluentes Químicos da Água/químicaRESUMO
Endocrine disrupting chemicals are a group of pollutants that can affect the endocrine system and lead to diseases and dysfunctions across the lifespan of organisms. They are omnipresent. They are in the air we breathe, in the food we eat and in the water we drink. They can be found in our everyday lives through personal care products, household cleaning products, furniture and in children's toys. Every year, hundreds of new chemicals are produced and released onto the market without being tested, and they reach our bodies through everyday products. Permanent exposure to those chemicals may intensify or even become the main cause for the development of diseases such as type 2 diabetes, obesity, cardiovascular diseases and certain types of cancer. In recent years, legislation and regulations have been implemented, which aim to control the release of potentially adverse endocrine disrupting chemicals, often invoking the precautionary principle. The objective of this review is to provide an overview of research on environmental aspects of endocrine disrupting chemicals and their effects on human health, based on evidence from animal and human studies. Emphasis is given to three ubiquitous and persistent groups of chemicals, polychlorinated biphenyls, polybrominated diphenyl ethers and organochlorine pesticides, and on two non-persistent, but ubiquitous, bisphenol A and phthalates. Some selected historical cases are also presented and successful cases of regulation and legislation described. These led to a decrease in exposure and consequent minimization of the effects of these compounds. Recommendations from experts on this field, World Health Organization, scientific reports and from the Endocrine Society are included.
Assuntos
Animais Selvagens , Disruptores Endócrinos/toxicidade , Monitoramento Ambiental , Poluentes Ambientais/toxicidade , Animais , HumanosRESUMO
The development of single coulometric cells in combination with high performance liquid chromatography to dual cells and to the coulometric electrode array detector is described. An overview is given about the application of these methods in food chemistry. Easily oxidizable compounds, such as phenolic substances, pesticides, or vitamins, can be determined, as well as substances with high oxidation potentials or electroinactive compounds. Substances exhibiting poor electrochemical activity can be transformed to electroactive compounds by precolumn derivatization, postcolumn photochemical reactions, postcolumn enzyme reactors, or by using the oxidative/reductive mode for coulometric electrode array detection. Furthermore, it is shown that the interesting combination of high performance liquid chromatography with electrochemistry and mass spectrometry has opened further possibilities with respect to interpretation of redox reactions, drug metabolism studies, metabolomics, and electrochemical derivatization.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Eletroquímica/métodos , Análise de Alimentos/métodos , Cromatografia Líquida de Alta Pressão/instrumentação , Eletroquímica/instrumentação , Análise de Alimentos/instrumentação , Contaminação de Alimentos/análiseRESUMO
A series of push-pull heterocyclic N,N-diphenylhydrazones were prepared to study the effect of structural modifications (different π-spacers and electron-withdrawing groups) on the optical (linear and nonlinear) and electronic properties of the molecules. The photovoltaic response of dye-sensitized solar cells assembled using nanocrystalline titania photosensitized with the synthesized dyes was also studied. These heterocyclic push-pull conjugated dyes involve N,N-diphenylhydrazones as electron donors linked to bithiophene or thieno[3,2-b]thiophene spacers and were functionalized with carboxylic acid, cyanoacetic acid, or dicyanovinyl acceptor groups. A combination of Suzuki-Miyaura cross-coupling, Vilsmeier formylation, and condensation reactions was used to synthesize the intermediates and final products. Density functional theory (DFT) and time dependent-DFT calculations were used to obtain information on conformation, electronic structure, and electron distribution, both for the free dyes and those adsorbed on TiO2. The results of this multidisciplinary study indicate that dyes 5b and 6b have the strongest second-order nonlinear optical response with hyperpolarizability values in the range of ß = 2330 × 10-30 to 2750 × 10-30 esu, whereas photovoltaic power conversion efficiencies reach values in the range of 0.7-3.0% for dyes 5a-b and 7c and were enhanced by coadsorbing deoxycholic acid (0.8-5.1%).
RESUMO
Excitation-Emission fluorescence spectroscopy is a versatile technique and has been used to detect, characterize and quantify residual Dissolved Organic Matter (DOM) in aquatic domains. PARAllel FACtor Analysis (PARAFAC) has been extensively used in the analysis of excitation-emission matrices (EEM), allowing for a better identification and quantification of contributions resulting from spectral decomposition. In this work we have adapted Independent Component Analysis (ICA) in order to make it suitable to the analysis of three-way EEM datasets, and tested ICA and PARAFAC performances for the study of three available datasets (Claus, Dorrit and drEEM). Semi-empirical simulation allowed us to assess the impact of (a) sample size, (b) signal sources and (c) composition dependencies, and the presence of (d) unspecific signal contributions (e.g. light scattering) upon both algorithms. PARAFAC and ICA have similar performances in processing ideal three-way EEM datasets but, in the presence of non-trilinear responses, ICA leads to a more realistic approach, yielding a better decomposition of contributing sources and their identification and quantification. This makes this algorithm more suitable for the analysis of real, raw EEM data, without the need of preprocessing to remove any unspecific contributions.
RESUMO
Three anionic fluorene-based alternating conjugated polyelectrolytes (CPEs) have been synthesized that have 9,9-bis(4-phenoxy-butylsulfonate) fluorene-2,7-diyl and 1,4-phenylene (PBS-PFP), 4,4'-biphenylene (PBS-PFP2), or 4,4â³-p-terphenylene (PBS-PFP3) groups, and the effect of the length of the oligophenylene spacer on their aggregation and photophysics has been studied. All form metastable dispersions in water, but can be solubilized using methanol, acetonitrile, or dioxane as cosolvents. This leads to increases in their emission intensities and blue shifts in fluorescence maxima due to break-up of aggregates. In addition, the emission maximum shifts to the blue and the loss of vibronic structure are observed when the number of phenylene rings is increased. Debsity Functional Theory (DFT) calculations suggest that this is due to increasing conformational flexibility as the number of phenylene rings increases. This is supported by increasing amplitude in the fast component in the fluorescence decay. The nonionic surfactant n-dodecylpentaoxyethylene glycol ether (C12E5) also breaks up aggregates, as seen by changes in fluorescence intensity and maximum. However, the loss in vibrational structure is less pronounced in this case, possibly due to a more rigid environment in the mixed surfactant-CPE aggregates. Further information on the aggregates formed with C12E5 was obtained by electrical conductivity measurements, which showed an initial increase in specific conductivity upon addition of surfactants, while at higher surfactant/CPE molar ratios a plateau was observed. The specific conductance in the plateau region decreased in the order PBS-PFP3 < PBS-PFP2 < PBS-PFP, in agreement with the change in charge density on the CPE. The reverse process of aggregate formation has been studied by injecting small volumes of solutions of CPEs dissolved at the molecular level in a good solvent system (50% methanol-water) into the poor solvent, water. Aggregation was monitored by changes in both fluorescence and light scattering. The rate of aggregation increases with hydrophobicity and concentration of sodium chloride but is only weakly dependent on temperature.
RESUMO
The modulation of conjugated polyelectrolyte fluorescence response by nonionic surfactants is dependent on the structures of the surfactant and polymer, polymer average molecular weight, and polyelectrolyte-surfactant interactions. In this paper, we study the effect of nonionic n-alkyl polyoxyethylene surfactants (CiEj) with different alkyl chain lengths (CiE5 with i = 6, 8, 10, and 12) and number of oxyethylene groups (C12Ej with j = 5, 7, and 9) on the photophysics and ionic conductivity of poly{[9,9-bis(6'-N,N,N-trimethylammonium)-hexyl]-2,7-fluorene-alt-1,4-phenylene}bromide (HTMA-PFP) in dimethyl sulfoxide-water 4% (v/v). Molecular dynamics simulations show that HTMA-PFP chains tend to approach as the simulation evolves. However, the minimum distance between the polymer centers of mass increases upon addition of the surfactant and grows with both the surfactant alkyl chain length and the number of oxyethylene groups, although there are no specific polymer-surfactant interactions. A significant increase in the polymer emission intensity has been observed at surfactant concentrations around their critical micelle concentrations (cmcs), which is attributed to polymer aggregate disruption. However, an increase in the solution conductivity for concentrations above the C12E5 cmc has only been observed for the HTMA-PFP/C12E5 system. The enhancement of fluorescence emission intensity and conductivity upon surfactant addition increases with polymer average molecular weights and seems to be controlled by the polymer-surfactant proximity, which is maximum for C10E5 and C12E5.
RESUMO
Conjugated polymers (CPs) have proved to be promising chemosensory materials for detecting nitroaromatic explosives vapors, as they quickly convert a chemical interaction into an easily-measured high-sensitivity optical output. The nitroaromatic analytes are strongly electron-deficient, whereas the conjugated polymer sensing materials are electron-rich. As a result, the photoexcitation of the CP is followed by electron transfer to the nitroaromatic analyte, resulting in a quenching of the light-emission from the conjugated polymer. The best CP in our studies was found to be poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-bithiophene] (F8T2). It is photostable, has a good absorption between 400 and 450 nm, and a strong and structured fluorescence around 550 nm. Our studies indicate up to 96% quenching of light-emission, accompanied by a marked decrease in the fluorescence lifetime, upon exposure of the films of F8T2 in ethyl cellulose to nitrobenzene (NB) and 1,3-dinitrobenzene (DNB) vapors at room temperature. The effects of the polymeric matrix, plasticizer, and temperature have been studied, and the morphology of films determined by scanning electron microscopy (SEM) and confocal fluorescence microscopy. We have used ink jet printing to produce sensor films containing both sensor element and a fluorescence reference. In addition, a high dynamic range, intensity-based fluorometer, using a laser diode and a filtered photodiode was developed for use with this system.
RESUMO
To celebrate the centenary of Science Progress we offer a short survey of the progress made over the past one hundred years in the research and application of photoinduced charge transfer. After a brief historical overview and introduction to photoinduced charge transfer, we discuss developments in the theory and practice of photography, photovoltaics, photocatalysis, fluorescent probes and chemosensing.
RESUMO
Multinuclear (1H and 13C) NMR, and Raman spectroscopy, combined with DFT calculations, provide detailed information on the complexation between U(vi) oxoions and 8-hydroxyquinoline-5-sulfonate (8-HQS) in aqueous solution. Over the concentration region studied, U(vi) oxoions (uranyl ions) form one dominant complex with 8-HQS in water in the pH range 3-6, a mononuclear 1 : 2 (metal : ligand) complex, with the metal centre (UO22+) coordinated to two 8-HQS ligands, together with one or more water molecules. An additional minor 1 : 1 complex has also been detected for solutions with a 1 : 1 metal : ligand molar ratio. The geometry of the dominant complex is proposed based on the combination of the NMR and Raman results with DFT calculations. Further information on the electronic structure of the complex has been obtained from UV/visible absorption and luminescence spectra. The complex of U(vi) and 8-HQS is non-luminescent, in contrast to what has been observed with this ligand and many other metal ions. We suggest that this is due to the presence of low-lying ligand-to-metal charge transfer (LMCT) states below the emitting ligand-based and uranyl-based levels which quench their emission. These studies have fundamental importance and are also relevant in the context of environmental studies, and the water soluble ligand 8-HQS has been chosen for application in uranium remediation of aqueous environments.
RESUMO
We report a comparative study on the photodegradation of the widely used benzodiazepine psychoactive drug alprazolam (8-chloro-1-methyl-6-phenyl-4H-[1,2,4]triazolo[4,3-a][1,4]benzodiazepine, ALP) using direct photolysis, and titanium dioxide photocatalyzed reaction. Titanium dioxide photocatalysts were prepared as nanoparticles by acidic sol-gel methods, calcined at two different temperatures, and their behavior compared with P25 (Degussa type) TiO2. Efficient photodegradation was observed in the photocatalytic process, with over 90% degradation after 90 minutes under optimized conditions. Triazolaminoquinoline, 5-chloro-(5-methyl-4H-1,2,4-triazol-4-yl)benzophenone, triazolbenzophenone, and α-hydroxyalprazolam were identified as the degradation products by fluorescence spectroscopy and HPLC-MS. A comparison with the literature suggests that 8H-alprazolam may also be formed. Good mineralization was observed with TiO2 photocatalysts. ALP photodegradation with TiO2 follows pseudo-first order kinetics, with rates depending on the photocatalyst used. The effects of the quantity of the photocatalyst and concentration of alprazolam were studied.
RESUMO
Novel near-infrared luminescent compounds based on platinum(II) 4,5,6,7-tetrahydropyrazolo[1,5-a]pyridine-fused chlorins are described. These compounds have high photostability and display light emission, in particular simultaneous fluorescence and phosphorescence emission in solution at room temperature, in the biologically relevant 700-850 nm red and near-infrared (NIR) spectral region, making them excellent materials for biological imaging. The simultaneous presence of fluorescence and phosphorescence emission at room temperature, with the phosphorescence strongly quenched by oxygen whereas fluorescence remains unaffected, allows these compounds to be used as ratiometric oxygen sensors in chemical and biological media. Both steady-state (fluorescence vs phosphorescence intensities) and dynamic (dependence of phosphorescence lifetimes upon oxygen concentration) luminescence approaches can be used. Photocytotoxicity studies against human melanocytic melanoma cells (A375) indicate that these compounds display potential as photosensitizers in photodynamic therapy.
RESUMO
The effect of anchoring groups on the optical and electrochemical properties of triphenylamine-thienothiophenes, and on the photovoltaic performance of DSSCs photosensitized with the prepared dyes, was studied using newly synthesized compounds with cyanoacetic acid or rhodanine-3-acetic acid groups. Precursor aldehydes were synthesized through Suzuki cross-coupling, whereas Knoevenagel condensation of these with 2-cyanoacetic acid or rhodanine-3-acetic acid afforded the final push-pull dyes. A comprehensive photophysical study was performed in solution and in the solid state. The femtosecond time-resolved transient absorption spectra for the synthesized dyes were obtained following photoexcitation in solution and for the dyes adsorbed to TiO2 mesoporous films. Information on conformation, electronic structure, and electron distribution was obtained by density functional theory (DFT) and time-dependent DFT calculations. Triphenylamine-thienothiophene functionalized with a cyanoacetic acid anchoring group displayed the highest conversion efficiency (3.68%) as the dye sensitizer in nanocrystalline TiO2 solar cells. Coadsorption studies were performed for this dye with the ruthenium-based N719 dye, and they showed dye power conversion efficiencies enhanced by 20-64%. The best cell performance obtained with the coadsorbed N719 and cyanoacetic dye showed an efficiency of 6.05%.
RESUMO
This review summarizes the legislation applied to pesticides and highlights the physicochemical properties of the past and recently listed PPs under Water Framework Directive (WFD). It reports important information regarding the analysis, occurrence and long-term screening of PPs in sediments of European coastal lagoons. Among the entire list of PPs, those analyzed have been the organochloride insecticides, such as lindane, hexachlorobenzene and DDT. Although flood events pointed to the possible redistribution of pesticides, which may increase under climate change conditions, few studies are available concerning PPs screening in sediments of European coastal lagoons. Data is scarce not only in terms of the number of listed PPs that have been analyzed but also in terms of their long-term screening. This lack of data on PP concentrations is probably a consequence of the fact that less importance is given to the sediments contamination/quality.