Bismuth-Based Perovskite Derivates with Thermal Voltage Exceeding 40 mV/K.

Heat is an inexhaustible source of energy, and it can be exploited by thermoelectronics to produce electrical power or electrical responses. The search for a low-cost thermoelectric material that could achieve high efficiencies and can also be straightforwardly scalable has turned significant attention to the halide perovskite family. Here, we report the thermal voltage response of bismuth-based perovskite derivates and suggest a path to increase the electrical conductivity by applying chalcogenide doping. The films were produced by drop-casting or spin coating, and sulfur was introduced in the precursor solution using bismuth triethylxanthate. The physical-chemical analysis confirms the substitution. The sulfur introduction caused resistivity reduction by 2 orders of magnitude, and the thermal voltage exceeded 40 mV K-1 near 300 K in doped and undoped bismuth-based perovskite derivates. X-ray diffraction, Raman spectroscopy, and grazing-incidence wide-angle X-ray scattering were employed to confirm the structure. X-ray photoelectron spectroscopy, elemental analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were employed to study the composition and morphology of the produced thin films. UV-visible absorbance, photoluminescence, inverse photoemission, and ultraviolet photoelectron spectroscopies have been used to investigate the energy band gap.

Nano-protrusions in intercalated graphite: understanding the structural and electronic effects through DFT.

Complex phenomena characterize the intercalation of ions inside stratified crystals. Their comprehension is crucial in view of exploiting the intercalation mechanism to change the transport properties of the crystal or obtaining a fine control of crystal delamination. In particular, the relationship between the concentration and nature of intercalated ions and surface structural modifications of the host stratified crystal is still under debate. Here, we discuss a theoretical effort to provide a rationale for some structural changes observed on the highly oriented pyrolytic graphite (HOPG) surface after electrochemical treatment in perchloric and sulphuric acid solutions. The formation of the so-called nano-protrusions on the basal plane of intercalated graphite was previously observed with scanning tunneling microscopy (STM). In this work, we employed both STM and density functional theory (DFT) simulations to elucidate the physical and chemical mechanisms driving the emergence of these nano-protrusions. The DFT results show that, in a bilayer graphene system, the presence of a single ion can generate a nano-protrusion with 2.49 Å height and 21.27 Å width. In the deformed area, the C-C bond length is stretched by about 2.5% more than the normal graphene bond. These values are of the same dimensional scale as those reported in previous STM experimental results.25 However, the simulated STM images obtained by increasing the amount of intercalated ions per area suggest that the presence of more than one ion is needed for the deformation of the uppermost graphite layer during the early stages of intercalation. In contrast, in a multilayer graphene system, no significant surface deformation is detected when ions are intercalated between the third and fourth layers. Charge analysis indicates an altered distribution of the charges as a consequence of the intercalation. The charge transfer from graphene layers to the intercalated ions results in a surface layer more prone to oxidation.

Copper Single Atoms Chelated on Ligand-Modified Carbon for Ullmann-Type C-O Coupling.

Invited for this month's cover is the group of Gianvito Vilé at the Politecnico di Milano. The ChemSusChem cover image depicts in an artistic manner the concept of ligand entrapping of isolated metals to design single-atom catalysts. The Research Article itself is available at 10.1002/cssc.202301529.

Copper Single Atoms Chelated on Ligand-Modified Carbon for Ullmann-type C-O Coupling.

Cross-coupling reactions are of great importance in chemistry due to their ability to facilitate the construction of complex organic molecules. Among these reactions, the Ullmann-type C-O coupling between phenols and aryl halides is particularly noteworthy and useful for preparing diarylethers. However, this reaction typically relies on homogeneous catalysts that rapidly deactivate under harsh reaction conditions. In this study, we introduce a novel heterogeneous catalyst for the Ullmann-type C-O coupling reaction, comprised of isolated Cu atoms chelated to a tetraethylenepentamine-pyrrole ligand that is immobilized on graphite nanoplatelets. The catalytic study reveals the recyclability of the material, and demonstrates the crucial role of the pyrrole linker in stabilizing the Cu sites. The work expands the potential of single-atom catalyst nanoarchitectures and underscores the significance of ligands in stabilizing metals in cationic forms, providing a novel, tailored catalyst for cross-coupling chemistries.

A Combined Raman Spectroscopy and Atomic Force Microscopy System for In Situ and Real-Time Measures in Electrochemical Cells.

An innovative and versatile set-up for in situ and real time measures in an electrochemical cell is described. An original coupling between micro-Raman spectroscopy and atomic force microscopy enables one to collect data on opaque electrodes. This system allows for the correlation of topographic images with chemical maps during the charge exchange occurring in oxidation/reduction processes. The proposed set-up plays a crucial role when reactions, both reversible and non-reversible, are studied step by step during electrochemical reactions and/or when local chemical analysis is required.

Optical Anisotropy of Porphyrin Nanocrystals Modified by the Electrochemical Dissolution.

Reflectance anisotropy spectroscopy (RAS) coupled to an electrochemical cell represents a powerful tool to correlate changes in the surface optical anisotropy to changes in the electrochemical currents related to electrochemical reactions. The high sensitivity of RAS in the range of the absorption bands of organic systems, such as porphyrins, allows us to directly correlate the variations of the optical anisotropy signal to modifications in the solid-state aggregation of the porphyrin molecules. By combining in situ RAS to electrochemical techniques, we studied the case of vacuum-deposited porphyrin nanocrystals, which have been recently observed dissolving through electrochemical oxidation in diluted sulfuric acid. Specifically, we could identify the first stages of the morphological modifications of the nanocrystals, which we could attribute to the single-electron transfers involved in the oxidation reaction; in this sense, the simultaneous variation of the optical anisotropy with the electron transfer acts as a precursor of the dissolution process of porphyrin nanocrystals.

Flexible Perfluoropolyethers-Functionalized CNTs-Based UHMWPE Composites: A Study on Hydrogen Evolution, Conductivity and Thermal Stability.

Flexible conductive composites based on ultra-high molecular weight polyethylene (UHMWPE) filled with multi-walled carbon nanotubes (CNTs) modified by perfluoropolyethers (PFPEs) were produced. The bonding of PFPE chains, added in 1:1 and 2:1 weight ratios, on CNTs influences the dispersion of nanotubes in the UHMWPE matrix due to the non-polar nature of the polymer, facilitating the formation of nanofillers-rich conductive pathways and improving composites' electrical conductivity (two to five orders of magnitude more) in comparison to UHMWPE-based nanocomposites obtained with pristine CNTs. Electrochemical atomic force microscopy (EC-AFM) was used to evaluate the morphological changes during cyclic voltammetry (CV). The decrease of the overpotential for hydrogen oxidation peaks in samples containing PFPE-functionalized CNTs and hydrogen production (approximately -1.0 V vs. SHE) suggests that these samples could find application in fuel cell technology as well as in hydrogen storage devices. Carbon black-containing composites were prepared for comparative study with CNTs containing nanocomposites.

Self-assembly of C60 on a ZnTPP/Fe(001)-p(1 × 1)O substrate: observation of a quasi-freestanding C60 monolayer.

Fullerene (C60) has been deposited in ultrahigh vacuum on top of a zinc tetraphenylporphyrin (ZnTPP) monolayer self-assembled on a Fe(001)-p(1 × 1)O substrate. The nanoscale morphology and the electronic properties of the C60/ZnTPP/Fe(001)-p(1 × 1)O heterostructure have been investigated by scanning tunneling microscopy/spectroscopy and ultraviolet photoemission spectroscopy. C60 nucleates compact and well-ordered hexagonal domains on top of the ZnTPP buffer layer, suggesting a high surface diffusivity of C60 and a weak coupling between the overlayer and the substrate. Accordingly, work function measurements reveal a negligible charge transfer at the C60/ZnTPP interface. Finally, the difference between the energy of the lowest unoccupied molecular orbital (LUMO) and that of the highest occupied molecular orbital (HOMO) measured on C60 is about 3.75 eV, a value remarkably higher than those found in fullerene films stabilized directly on metal surfaces. Our results unveil a model system that could be useful in applications in which a quasi-freestanding monolayer of C60 interfaced with a metallic electrode is required.

Ordered assembly of non-planar vanadyl-tetraphenylporphyrins on ultra-thin iron oxide.

Stabilizing ordered assemblies of molecules represents the first step towards the construction of molecular devices featuring hybrid (organic-inorganic) interfaces where molecules can be easily functionalized in view of specific applications. Molecular layers of planar metal-tetraphenylporphyrins (MTPP) grown on an ultrathin iron oxide [namely Fe(001)-p(1 × 1)O] show indeed a high degree of structural order. The generality of such a picture is tested by exploiting non-planar porphyrins, such as vanadyl-TPP (VOTPP). These molecules feature a VO2+ ion in their center, with the O atom protruding out of the plane of the porphyrin ring. In this work, by employing diffraction, photoemission and X-ray absorption, we prove that non-planar VOTPP can nevertheless form a square and ordered superstructure, where porphyrin molecules lie flat with respect to the underlying substrate. Ab initio density functional theory simulations are used to elucidate the VO bond orientation with respect to the iron substrate.

Compared EC-AFM Analysis of Laser-Induced Graphene and Graphite Electrodes in Sulfuric Acid Electrolyte.

Flexible and economic sensor devices are the focus of increasing interest for their potential and wide applications in medicine, food analysis, pollution, water quality, etc. In these areas, the possibility of using stable, reproducible, and pocket devices can simplify the acquisition of data. Among recent prototypes, sensors based on laser-induced graphene (LIGE) on Kapton represent a feasible choice. In particular, LIGE devices are also exploited as electrodes for sensing in liquids. Despite a characterization with electrochemical (EC) methods in the literature, a closer comparison with traditional graphite electrodes is still missing. In this study, we combine atomic force microscopy with an EC cell (EC-AFM) to study, in situ, electrode oxidation reactions when LIGE or other graphite samples are used as anodes inside an acid electrolyte. This investigation shows the quality and performance of the LIGE electrode with respect to other samples. Finally, an ex situ Raman spectroscopy analysis allows a detailed chemical analysis of the employed electrodes.

Electrochemical Characterization of Magnetite (Fe3O4) Nanoaggregates in Acidic and Alkaline Solutions.

The electrochemical behavior of magnetite (Fe3O4) aggregates with submicrometric size is investigated. Specifically, cyclic voltammetry tests were performed in both acidic (pH ∼ 4.5) and alkaline (pH ∼ 12.8) solutions, exploiting a conventional three-electrode cell. In the first case, the working electrode was made of a glassy carbon substrate loaded with magnetite nanoaggregates, forming a continuous film. In a second configuration, magnetite nanoaggregates were dispersed in solution, kept under stirring, as a fluidized electrode. The latter approach showed an increase in the electrochemical response of the particles, otherwise limited by the reduced active area as in the former case. Electrochemical-atomic force microscopy (EC-AFM) investigation was carried out in an acidic environment, showing the topography evolution of nanoaggregates during the electrochemical characterization. X-ray diffraction (XRD) analysis was carried out to evaluate the microstructural variation in the Fe3O4 electrodes after cathodic polarization tests in an alkaline environment.

Driving Organic Nanocrystals Dissolution Through Electrochemistry.

We have recently discussed how organic nanocrystal dissolution appears in different morphologies and the role of the solution pH in the crystal detriment process. We also highlighted the role of the local molecular chemistry in porphyrin nanocrystals having comparable structures: in water-based acid solutions, protonation of free-base porphyrin molecules is the driving force for crystal dissolution, whereas metal (ZnII ) porphyrin nanocrystals remain unperturbed. However, all porphyrin types, having an electron rich π-structure, can be electrochemically oxidized. In this scenario, a key question is: does electrochemistry represent a viable strategy to drive the dissolution of both free-base and metal porphyrin nanocrystals? In this work, by exploiting electrochemical atomic force microscopy (EC-AFM), we monitor in situ and in real time the dissolution of both free-base and metal porphyrin nanocrystals, as soon as molecules reach the oxidation potential, showing different regimes according to the applied EC potential.

An In-Depth Assessment of the Electronic and Magnetic Properties of a Highly Ordered Hybrid Interface: The Case of Nickel Tetra-Phenyl-Porphyrins on Fe(001)-p(1 × 1)O.

In this paper we focus on the structural, electronic, and magnetic properties of Ni tetra-phenyl-porphyrins (NiTPP) grown on top of Fe(001)-p(1 × 1)O. Ordered thin films of metal TPP molecules are potentially interesting for organic electronic and spintronic applications, especially when they are coupled to a ferromagnetic substrate. Unfortunately, porphyrin layers deposited on top of ferromagnetic substrates do not generally show long-range order. In this work, we provide evidence of an ordered disposition of the organic film above the iron surface and we prove that the thin layer of iron oxide decouples the molecules from the substrate, thus preserving the molecular electronic features, especially the HOMO-LUMO gap, even when just a few organic layers are deposited. The effect of the exposure to molecular oxygen is also investigated and an increased robustness against oxidation with respect to the bare substrate is detected. Finally, we present our results for the magnetic analysis performed by spin resolved spectroscopy, finding a null magnetic coupling between the molecules and the substrate.

Seeding Chiral Ensembles of Prolinated Porphyrin Derivatives on Glass Surface: Simple and Rapid Access to Chiral Porphyrin Films.

An easy and fast method to achieve chiral porphyrin films on glass is herein reported. The on-surface formation of organized supramolecular architectures with distinctive and remarkable chiroptical features strictly depends on the macrocycles used, the solvent chosen for the casting deposition, and most importantly, on the roughness of the glass slide. Dynamic light scattering studies performed on 10-4-10-6 M porphyrin solutions revealed the presence of small porphyrin aggregates, whose size and number increase depending on the initial concentration. Once transferred on surface, these protoaggregates act as nucleation seeds for the following, self-assembling into larger structures upon solvent evaporation, with a process driven by a fine balance between intermolecular and molecule-substrate interactions. The described method represents a straightforward way to fabricate porphyrin-based chiral surfaces onto a transparent and economic substrate in few minutes. The results obtained can be particularly promising for the development of sensors based on stereoselective optical active films, targeting the detection of chiral analytes of practical relevance, such as the so-called emerging pollutants released in the environment from agrochemical, food, and pharmaceutical manufacturing.

Electrochemical scanning probe analysis used as a benchmark for carbon forms quality test.

Carbon forms (graphite, pyrolytic graphite, highly oriented pyrolytic graphite (HOPG), glassy carbon, carbon foam, graphene, buckypaper, etc) are a wide class of materials largely used in technology and energy storage. The huge request of carbon compounds with reliable and tunable physical and chemical properties is tackled by contriving new production protocols and/or compound functionalizations. To achieve these goals, new samples must be tested in a trial-and-error strategy with techniques that provide information in terms of both specimen quality and properties. In this work, we prove that electrochemical scanning probe techniques allow testing the performances of carbon compounds when are used as an electrode inside an electrochemical cell. Comparing the results with a reference sample (namely, HOPG) gives an insight on defects in the specimen structure, performances, and possible applications of the new samples. In this study, we concentrate on traditional carbon forms already employed in many fields versus new recently-developed specimens, in view of possible applications to the field of energy storage.

Empty electron states in cobalt-intercalated graphene.

The dispersion of the electronic states of epitaxial graphene (Gr) depends significantly on the strength of the bonding with the underlying substrate. We report on empty electron states in cobalt-intercalated Gr grown on Ir(111), studied by angle-resolved inverse photoemission spectroscopy and x-ray absorption spectroscopy, complemented with density functional theory calculations. The weakly bonded Gr on Ir preserves the peculiar spectroscopic features of the Gr band structure, and the empty spectral densities are almost unperturbed. Upon intercalation of a Co layer, the electronic response of the interface changes, with an intermixing of the Gr π* bands and Co d states, which breaks the symmetry of π/σ states, and a downshift of the upper part of the Gr Dirac cone. Similarly, the image potential of Ir(111) is unaltered by the Gr layer, while a downward shift is induced upon Co intercalation, as unveiled by the image state energy dispersion mapped in a large region of the surface Brillouin zone.

Application of UV-vis optical spectroscopy in electrochemical processes: case-study of graphite anion intercalation.

The possibility of following electrochemical processes in situ and in real time using optical techniques is important in view of shining a light on the chemical processes at the surface. The interest grows if the optical apparatus is compact and can be employed in industrial quality-check protocols. Here, we show how graphite anion intercalation-an important chemical process to massively produce graphene flakes-can be monitored by a UV-vis spectrometer when the graphite works as an electrode immersed inside the electrochemical cell. Important information on the reversibility or quasi-reversibility of the reaction shows a clear visualization in optical color maps.

Uniaxial Alignment of a Monolayer of Flat-on Free-Base Porphyrins on an Exfoliable Insulating Substrate.

Porphyrins are an extremely valuable class of molecules engaged in a variety of roles spanning from biology to optoelectronics. Manipulation of the chemical and physical properties of the inner cavity of porphyrins has been recognized as crucial for the exploitation of these systems in organic devices, particularly when porphyrins self-organize at the interface with a flat-on orientation of the macrocycle. Such an orientation has been mostly observed on metallic surfaces. Unfortunately, the physical-chemical properties of the molecules result in being largely perturbed due to the molecule-metal interaction. In addition, conducting substrates are unsuited to exploit electrically driven devices based on organic layers. To overcome these issues, we performed a topology-based analysis of insulating organic single crystal structures to identify a surface which (i) ensures easy exfoliation through mechanical methods, (ii) ensures epitaxial match with an overlayer of close-packed flat-on porphyrin molecules, and (iii) displays chirality. The outcome of this work is represented by a unique crystal of mixed 2,5-diketopiperazine and fumaric acid in a 1:1 ratio. We demonstrate that the (110) surface of this crystal fulfills the aforementioned requirements and, thanks to its peculiar subnanometric corrugations, allows one to grow uniaxially aligned monolayers of flat-on porphyrin molecules assembled through van der Waals interactions.

Graphene as an Ideal Buffer Layer for the Growth of High-Quality Ultrathin Cr2O3 Layers on Ni(111).

Metal-oxide nanostructures play a fundamental role in a large number of technological applications, ranging from chemical sensors to data storage devices. As the size of the devices shrinks down to the nanoscale, it is mandatory to obtain sharp and good quality interfaces. Here, it is shown that a two-dimensional material, namely, graphene, can be exploited as an ideal buffer layer to tailor the properties of the interface between a metallic substrate and an ultrathin oxide. This is proven at the interface between an ultrathin film of the magnetoelectric antiferromagnetic oxide Cr2O3 and a Ni(111) single crystal substrate. The chemical composition of the samples has been studied by means of X-ray photoemission spectroscopy, showing that the insertion of graphene, which remains buried at the interface, is able to prevent the oxidation of the substrate. This protective action leads to an ordered and layer-by-layer growth, as revealed by scanning tunneling microscopy data. The structural analysis performed by low-energy electron diffraction indicates that the oxide layer grown on graphene experiences a significant compressive strain, which strongly influences the surface electronic structure observed by scanning tunneling spectroscopy.