RESUMO
PURPOSE: This research aims to enhance understanding of the anatomy of the supraorbital nerve (SON) and greater occipital nerve (GON), focusing on their exit points, distal trajectories, and variability, utilizing a novel 3D representation. METHODS: Ten cadaveric specimens underwent meticulous dissection, and 3D landmarks were registered. Models were generated from CT scans, and a custom 3D method was employed to visualize nerve trajectories. Measurements, including lengths and distances, were obtained for the SON and GON. RESULTS: The SON exhibited varied exit points, with the lateral branches being the longest. The GON showed distinct branching patterns, which are described relative to various anatomical reference points and planes. No systematic left-right differences were observed for either nerve. 3D analysis revealed significant interindividual variability in nerve trajectories. The closest approximation between the SON and GON occurred between lateral branches. CONCLUSION: The study introduces a novel 3D methodology for analyzing the SON and GON, highlighting considerable anatomical variation. Understanding this variability is crucial for clinical applications and tools targeting the skull innervation. The findings serve as a valuable reference for future research, emphasizing the necessity for personalized approaches in innervation-related interventions.
Assuntos
Variação Anatômica , Cadáver , Imageamento Tridimensional , Tomografia Computadorizada por Raios X , Humanos , Masculino , Feminino , Pontos de Referência Anatômicos , Idoso , Dissecação , Órbita/anatomia & histologia , Órbita/inervação , Órbita/diagnóstico por imagem , Idoso de 80 Anos ou maisRESUMO
BACKGROUND: Imaging the lower limb during weight-bearing conditions is essential to acquire advanced functional joint information. The horizontal bed position of CT systems however hinders this process. The purpose of this study was to validate and test a device to simulate realistic knee weight-bearing motion in a horizontal position during dynamic CT acquisition and process the acquired images. METHODS: "Orthostatic squats" was compared to "Horizontal squats" on a device with loads between 35% and 55% of the body weight (%BW) in 20 healthy volunteers. Intraclass Correlation Coefficient (ICC), and standard error of measurement (SEM), were computed as measures of the reliability of curve kinematic and surface EMG (sEMG) data. Afterwards, the device was tested during dynamic CT acquisitions on three healthy volunteers and three patients with patellofemoral pain syndrome. The respective images were processed to extract Tibial-Tuberosity Trochlear-Groove distance, Bisect Offset and Lateral Patellar Tilt metrics. RESULTS: For sEMG, the highest average ICCs (SEM) of 0.80 (6.9), was found for the load corresponding to 42%BW. Kinematic analysis showed ICCs were the highest for loads of 42%BW during the eccentric phase (0.79-0.87) and from maximum flexion back to 20° (0.76). The device proved to be safe and reliable during the acquisition of dynamic CT images and the three metrics were computed, showing preliminary differences between healthy and pathological participants. CONCLUSIONS: This device could simulate orthostatic squats in a horizontal position with good reliability. It also successfully provided dynamic CT scan images and kinematic parameters of healthy and pathological knees during weight-bearing movement.
Assuntos
Joelho , Articulação Patelofemoral , Humanos , Reprodutibilidade dos Testes , Articulação do Joelho/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Suporte de Carga , Amplitude de Movimento ArticularRESUMO
OBJECTIVES: To quantitatively evaluate the impact of a cardiac acquisition CT mode on motion artifacts in comparison to a conventional cine mode for dynamic musculoskeletal (MSK) imaging. METHODS: A rotating PMMA phantom with air-filled holes drilled at varying distances from the disk center corresponding to linear hole speeds of 0.75â¯cm/s, 2.0â¯cm/s, and 3.6â¯cm/s was designed. Dynamic scans were obtained in cardiac and cine modes while the phantom was rotating at 48°/s in the CT scanner. An automated workflow to compute the Jaccard distance (JD) was established to quantify degree of motion artifacts in the reconstructed phantom images. JD values between the cardiac and cine scan modes were compared using a paired sample t-test. In addition, three healthy volunteers were scanned with both modes during a cyclic flexion-extension motion of the knee and analysed using the proposed metric. RESULTS: For all hole sizes and speeds, the cardiac scan mode had significantly lower (p-value <0.001) JD values. (0.39 [0.32-0.46]) i.e less motion artifacts in comparison to the cine mode (0.72 [0.68-0.76]). For both modes, a progressive increase in JD was also observed as the linear speed of the holes increased from 0.75â¯cm/s to 3.6â¯cm/s. The dynamic images of the three healthy volunteers showed less artifacts when scanned in cardiac mode compared to cine mode, and this was quantitatively confirmed by the JD values. CONCLUSIONS: A cardiac scan mode could be used to study dynamic musculoskeletal phenomena especially of fast-moving joints since it significantly minimized motion artifacts.
Assuntos
Sistema Musculoesquelético , Tomografia Computadorizada por Raios X , Humanos , Imagens de Fantasmas , Sistema Musculoesquelético/diagnóstico por imagem , ArtefatosRESUMO
Background: The direction and the magnitude of verbal suggestions have been shown to be strong modulators of nocebo hyperalgesia, while little attention has been given to the role of their temporal content. Here, we investigate whether temporal suggestions modulate the timing of nocebo hyperalgesia in an experimental model of sustained pain. Methods: Fifty-one healthy participants were allocated to one of three groups. Participants received an inert cream and were instructed that the agent had either hyperalgesic properties setting in after 5 (Nocebo 5, N5) or 30 (Nocebo 30, N30) minutes from cream application, or hydrating properties (No Expectation Group, NE). Pain was induced by the Cold Pressure Test (CPT) which was repeated before cream application (baseline) and after 10 (Test10) and 35 (Test35) minutes. Changes in pain tolerance and in HR at each test point in respect to baseline were compared between the three groups. Results: Tolerance change at Test 10 (Δ10) was greater in N5 (MED = -36.8; IQR = 20.9) compared to NE (MED = -5.3; IQR = 22.4; p < 0.001) and N30 (MED = 0.0; IQR = 23.1; p < 0.001), showing that hyperalgesia was only present in the group that expected the effect of the cream to set in early. Tolerance change at Test 35 (Δ35) was greater in N5 (MED = -36.3; IQR = 35.3; p = 0.002) and in N30 (MED = -33.3; IQR = 34.8; p = 0.009) compared to NE, indicating delayed onset of hyperalgesia in N30, and sustained hyperalgesia in N5. No group differences were found for HR. Conclusions: Our study demonstrated that temporal expectations shift nocebo response onset in a model of sustained pain.
RESUMO
BACKGROUND & AIMS: Sarcopenia is defined as the age-related loss in muscle quantity and quality which is associated with physical disability. The assessment of muscle quantity plays a role in the diagnosis of sarcopenia. However, the methods used for this assessment have many disadvantages in daily practice and research, like high costs, exposure to radiation, not being portable, or doubtful reliability. Ultrasound has been suggested for the estimation of muscle quantity by estimating muscle mass, using a prediction equation based on muscle thickness. In this systematic review, we aimed to summarize the available evidence on existing prediction equations to estimate muscle mass and to assess whether these are applicable in various adult populations. METHODS: The databases PubMed, PsycINFO, and Web of Science were used to search for studies predicting total or appendicular muscle mass using ultrasound. The methodological quality of the included studies was assessed using the Quality Assessment of Diagnostic Accuracy Studies, version 2 (QUADAS-2) and the quality assessment checklist (QA) designed by Pretorius and Keating (2008). RESULTS: Twelve studies were included in this systematic review. The participants were between 18 and 79 years old. Magnetic Resonance Imaging and dual-energy X-ray absorptiometry were used as reference methods. The studies generally had low risk of bias and there were low concerns regarding the applicability (QUADAS-2). Nine out of eleven studies reached high quality on the QA. All equations were developed in healthy adults. CONCLUSIONS: The ultrasound-derived equations in the included articles are valid and applicable in a healthy population. For a Caucasian population we recommend to use the equation of Abe et al., 2015. While for an Asian population, we recommend to use the equation of Abe et al., 2018, for the South American population, the use of the equation of Barbosa-Silva et al., 2021 is the most appropriate.
Assuntos
Composição Corporal , Sarcopenia , Adolescente , Adulto , Idoso , Humanos , Pessoa de Meia-Idade , Músculo Esquelético/diagnóstico por imagem , Músculo Esquelético/metabolismo , Reprodutibilidade dos Testes , Sarcopenia/diagnóstico por imagem , Ultrassonografia , Adulto JovemRESUMO
Dynamic computer tomography (CT) is an emerging modality to analyze in-vivo joint kinematics at the bone level, but it requires manual bone segmentation and, in some instances, landmark identification. The objective of this study is to present an automated workflow for the assessment of three-dimensional in vivo joint kinematics from dynamic musculoskeletal CT images. The proposed method relies on a multi-atlas, multi-label segmentation and landmark propagation framework to extract bony structures and detect anatomical landmarks on the CT dataset. The segmented structures serve as regions of interest for the subsequent motion estimation across the dynamic sequence. The landmarks are propagated across the dynamic sequence for the construction of bone embedded reference frames from which kinematic parameters are estimated. We applied our workflow on dynamic CT images obtained from 15 healthy subjects on two different joints: thumb base (n = 5) and knee (n = 10). The proposed method resulted in segmentation accuracies of 0.90 ± 0.01 for the thumb dataset and 0.94 ± 0.02 for the knee as measured by the Dice score coefficient. In terms of motion estimation, mean differences in cardan angles between the automated algorithm and manual segmentation, and landmark identification performed by an expert were below 1°. Intraclass correlation (ICC) between cardan angles from the algorithm and results from expert manual landmarks ranged from 0.72 to 0.99 for all joints across all axes. The proposed automated method resulted in reproducible and reliable measurements, enabling the assessment of joint kinematics using 4DCT in clinical routine.
RESUMO
Several studies have investigated the effect of botulinum toxin A (BoNT-A) for managing chronic musculoskeletal pain, bringing contrasting results to the forefront. Thus far, however, there has been no synthesis of evidence on the effect of BoNT-A as an adjunctive treatment within a multimodal approach. Hence, Medline via PubMed, EMBASE, and the Cochrane Library-CENTRAL were searched until November 2020 for randomised controlled trials (RCTs) that investigated the use of BoNT-A as an adjunctive therapy for chronic musculoskeletal pain. The risk of bias (RoB) and the overall quality of the studies were assessed through RoB 2.0 and the GRADE approach, respectively. Meta-analysis was conducted to analyse the pooled results of the six included RCTs. Four were at a low RoB, while two were at a high RoB. The meta-analysis showed that BoNT-A as an adjunctive therapy did not significantly decrease pain compared to the sole use of traditional treatment (SDM -0.89; 95% CI -1.91; 0.12; p = 0.08). Caution should be used when interpreting such results, since the studies displayed very high heterogeneity (I = 94%, p < 0.001). The overall certainty of the evidence was very low. The data retrieved from this systematic review do not support the use of BoNT-A as an adjunctive therapy in treating chronic musculoskeletal pain.
Assuntos
Toxinas Botulínicas Tipo A/uso terapêutico , Dor Crônica/terapia , Dor Musculoesquelética/terapia , Terapia Combinada/estatística & dados numéricos , HumanosRESUMO
Evaluating musculoskeletal conditions of the lower limb and understanding the pathophysiology of complex bone kinematics is challenging. Static images do not take into account the dynamic component of relative bone motion and muscle activation. Fluoroscopy and dynamic MRI have important limitations. Dynamic CT (4D-CT) is an emerging alternative that combines high spatial and temporal resolution, with an increased availability in clinical practice. 4D-CT allows simultaneous visualization of bone morphology and joint kinematics. This unique combination makes it an ideal tool to evaluate functional disorders of the musculoskeletal system. In the lower limb, 4D-CT has been used to diagnose femoroacetabular impingement, patellofemoral, ankle and subtalar joint instability, or reduced range of motion. 4D-CT has also been used to demonstrate the effect of surgery, mainly on patellar instability. 4D-CT will need further research and validation before it can be widely used in clinical practice. We believe, however, it is here to stay, and will become a reference in the diagnosis of lower limb conditions and the evaluation of treatment options. Cite this article: Bone Joint J 2021;103-B(5):822-827.
Assuntos
Tomografia Computadorizada Quadridimensional , Extremidade Inferior/diagnóstico por imagem , Extremidade Inferior/fisiopatologia , Doenças Musculoesqueléticas/diagnóstico por imagem , Doenças Musculoesqueléticas/fisiopatologia , Fenômenos Biomecânicos , HumanosRESUMO
BACKGROUND: Understanding the 3D-kinematics of the upper cervical spine during manual mobilization is essential for clinical examination and therapy. Some information about rotational motion is available in literature but translational components are often ignored, complicating the understanding of the complex inter-segmental motions. OBJECTIVES: This study aims to describe the amount, trajectories and reproducibility of atlanto-occipital facet joints' displacement during a flexion-extension mobilization and of the atlanto-axial facet joints during an axial rotation mobilization. DESIGN: Original research using quantitative data. METHODS: 20 fresh frozen human cervical specimens were examined with a Zebris® CMS20 ultrasound-based motion tracking system. Two physiotherapists performed regionalmobilizations in flexion-extension and axial rotation. The amount of displacement and the trajectories were calculated along the XYZ axes. Difference between measurements was evaluated with the Friedman two-way ANOVA test. Intra- and inter-rater reliability were estimated through ICC scores. RESULTS: 3D-displacement (2.6-23.4 mm) was larger at C1-C2 during axial rotation, Atlanto-occipital flexion displayed the greatest variability in the C0 trajectory. During a right rotation, the left C1 facet moved mainly forward, and the right C1 facet moved backward. During a left rotation, the left C1 facet moved backward, while the right C1 facet moved forward. Intra-tester and Inter-tester ICCs varied between 0.5 and 0.90 (p < 0.005). CONCLUSIONS: During passive spinal motion, there is an important variability in magnitude and trajectory of joints' displacement. Nevertheless, different clinicians may be able to achieve the same position at the end of the mobilization.
Assuntos
Articulação Atlantoaxial , Articulação Zigapofisária , Vértebras Cervicais/diagnóstico por imagem , Humanos , Amplitude de Movimento Articular , Reprodutibilidade dos Testes , Articulação Zigapofisária/diagnóstico por imagemRESUMO
Purpose The present study analyses the kinematics of patients with neck problems and healthy controls by estimation of Finite Helical Axis behaviour. A cross sectional study design was used to investigate whether FHA behaviour differs due to neck problems. METHODS: 584 subjects were recruited from private and ambulatory institutional physiotherapy practices. Among these 171 patients with neck related problems were selected based on referral diagnosis by primary care general practitioners. Cervical kinematics were compared based on minimal convex hull, path length and mean angle of the Finite Helical Axis distribution as well as on the helical angle. Three active planar motions were registered: flexion-extension, axial rotation and lateral bending. RESULTS: Patients demonstrated a significantly reduced and less variable behaviour of the Finite Helical Axis during active flexion-extension and axial rotation motions as compared to healthy individuals and lateral bending. CONCLUSION: Patients with neck related problems demonstrate a more restricted motion behaviour with less variability in Finite Helical Axis distribution and orientation during active planar motions. At present it is not clear whether these kinematic differences are the result or the cause of dysfunction. These slides can be retrieved under Electronic Supplementary Material.
Assuntos
Vértebras Cervicais , Fenômenos Biomecânicos , Estudos Transversais , Humanos , Amplitude de Movimento Articular , RotaçãoRESUMO
The objective of the current study was to explore the potential of dynamic computed tomography to detect kinematic changes, induced by sequential sectioning of the lateral collateral ligaments of the ankle, during full motion sequence of the talocrural joint. A custom-made device was used to induce cyclic controlled ankle inversion movement in one fresh frozen cadaver leg. A 256-slice CT scanner was used to investigate four different scenarios. Scenario 1 with all ligaments intact was first investigated followed by sequential section of the anterior talo-fibular ligament (Scenario 2), the calcaneo-fibular ligament (Scenario 3) and posterior talo-fibular ligament (Scenario 4). Off-line image processing based on semi-automatic segmentation and bone rigid registration was performed. Motion parameters such as translation, rotational angles and orientation and position of the axis of rotation were calculated. Differences between scenarios were calculated. Progressive increase of cranio-caudal displacement up to 3.9 mm and flexion up to 10° compared to Scenario 1 were reported. Progressive changes in orientation (up to 20.6°) and position (up to 4.1 mm) of the axis of rotation were also shown. Estimated effective dose of 0.005 mSv (1.9 mGy CTDIvol) was reported. This study demonstrated that kinematic changes due to the absence of ligament integrity can be detected with 4DCT with minimal radiation exposure. Identifying abnormal kinematic patterns could have future application in helping clinicians to choose patients' optimal treatment. Therefore, further studies with bigger in vitro sample sizes and consequent investigations in vivo are recommended to confirm the current findings.
Assuntos
Articulação do Tornozelo/diagnóstico por imagem , Articulação do Tornozelo/fisiopatologia , Tomografia Computadorizada Quadridimensional , Ligamentos Articulares/diagnóstico por imagem , Ligamentos Articulares/fisiopatologia , Feminino , Humanos , Amplitude de Movimento Articular , RotaçãoRESUMO
BACKGROUND: Manual treatments targeting different regions (shoulder, cervical spine, thoracic spine, ribs) have been studied to deal with patients complaining of shoulder pain. Thoracic manual treatments seem able to produce beneficial effects on this group of patients. However, it is not clear whether the patient improvement is a consequence of thoracic manual therapy or a placebo effect. OBJECTIVES: To compare the efficacy of thoracic manual therapy and placebo thoracic manual treatment for patients with shoulder dysfunction. METHODS: Electronic databases (MEDLINE, CENTRAL, PEDro, CINAHL, WoS, EMBASE, ERIC) were searched through November 2016. Randomized Controlled Trials assessing pain, mobility and function were selected. The Cochrane bias estimation tool was applied. Outcome results were either extracted or computed from raw data. Meta-analysis was performed for outcomes with low heterogeneity. RESULTS: Four studies were included in the review. The methodology of the included studies was generally good except for one study that was rated as high risk of bias. Meta-analysis showed no significant effect for "pain at present" (SMD -0.02; 95% CI: -0.35, 0.32) and "pain during movement" (SMD -0.12; 95% CI: -0.45, 0.21). CONCLUSION: There is very low to low quality of evidence that a single session of thoracic manual therapy is not more effective than a single session of placebo thoracic manual therapy in patients with shoulder dysfunction at immediate post-treatment.
Assuntos
Manipulações Musculoesqueléticas/métodos , Medição da Dor , Dor de Ombro/terapia , Vértebras Torácicas , Adulto , Idoso , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Placebos , Amplitude de Movimento Articular/fisiologia , Índice de Gravidade de Doença , Dor de Ombro/diagnóstico , Resultado do TratamentoRESUMO
BACKGROUND: Very little is known about the kinematics of the upper cervical spine in particular during Manual Therapy techniques. In fact no data about displacement of the atlanto-axial joint during High-Velocity Low-Amplitude (HVLA) thrust are available. Knowing the precise kinematics of these vertebrae might allow a better comprehension of such important technique and possible vital structures involvement. METHODS: A Zebris CMS20 ultrasound-based motion tracking system was adopted. Twenty fresh human cervical specimens were used in this study. Facet joint displacements of C1 relative to C2 were analysed during three consecutive HVLA thrusts into rotation. Displacement during the thrust and the maximum displacement reached with the manoeuvre were analysed. RESULTS: Descriptive statistics showed a mean Norm displacement during the thrust of 0.5 mm (SD ± 0.5). The maximum displacement, representing the overall facet movement from neutral to end-range position, indicated a Norm value of 6.0 mm (SD ± 3.4). Heterogeneous displacement directions were found during the thrust. Intra and inter-rater reliability reached an insufficient reproducibility level. Considering the amount of displacement induced, no statistical significant differences between the registrations were shown. CONCLUSION: Displacement during the execution of HVLA thrust is unintentional, unpredictable and not reproducible. On the other hand and in accordance with other studies, the displacement induced with the present technique seems not to be able to endanger vital structure on the Spinal Cord and the Vertebral Artery. This study also adds to a better comprehension of the kinematic of the atlanto-axial segment during the performance of HVLA manipulation.