Stearate-Coated Biogenic Calcium Carbonate from Waste Seashells: A Sustainable Plastic Filler.

Waste seashells from aquaculture are a massive source of biogenic calcium carbonate (bCC) that can be a potential substitute for ground calcium carbonate and precipitated calcium carbonate. These last materials find several applications in industry after a surface coating with hydrophobic molecules, with stearate as the most used. Here, we investigate for the first time the capability of aqueous stearate dispersions to coat bCC powders from seashells of market-relevant mollusc aquaculture species, namely the oyster Crassostrea gigas, the scallop Pecten jacobaeus, and the clam Chamelea gallina. The chemical-physical features of bCC were extensively characterized by different analytical techniques. The results of stearate adsorption experiments showed that the oyster shell powder, which is the bCC with a higher content of the organic matrix, showed the highest adsorption capability (about 23 wt % compared to 10 wt % of geogenic calcite). These results agree with the mechanism proposed in the literature in which stearate adsorption mainly involves the formation of calcium stearate micelles in the dispersion before the physical adsorption. The coated bCC from oyster shells was also tested as fillers in an ethylene vinyl acetate compound used for the preparation of shoe soles. The obtained compound showed better mechanical performance than the one prepared using ground calcium. In conclusion, we can state that bCC can replace ground and precipitated calcium carbonate and has a higher stearate adsorbing capability. Moreover, they represent an environmentally friendly and sustainable source of calcium carbonate that organisms produce by high biological control over composition, polymorphism, and crystal texture. These features can be exploited for applications in fields where calcium carbonate with selected features is required.

Reversible chirality inversion of an AuAgx-cysteine coordination polymer by pH change.

Responsive chiral systems have attracted considerable attention, given their potential for diverse applications in biology, optoelectronics, photonics, and related fields. Here we show the reversible chirality inversion of an AuAgx-cysteine (AuAgx-cys) coordination polymer (CP) by pH changes. The polymer can be obtained by mixing HAuCl4 and AgNO3 with L-cysteine (or D-cysteine) in appropriate proportions in H2O (or other surfactant solutions). Circular dichroism (CD) spectrum is used to record the strong optical activity of the AuAg0.06-L-cys enantiomer (denoted as L0.06), which can be switched to that of the corresponding D0.06 enantiomer by alkalization (final dispersion pH > 13) and can be switched back after neutralization (final dispersion pH <8). Multiple structural changes at different pH values (≈9.6, ≈13) are observed through UV-Vis and CD spectral measurements, as well as other controlled experiments. Exploration of the CP synthesis kinetics suggests that the covalent bond formation is rapid and then the conformation of the CP materials would continuously evolve. The reaction stoichiometry investigation shows that the formation of CP materials with chirality inversion behavior requires the balancing between different coordination and polymerization processes. This study provides insights into the potential of inorganic stereochemistry in developing promising functional materials.

Effect of calcium-coacervate infiltration of artificial enamel caries lesions in de- and remineralizing conditions.

OBJECTIVES: Calcium-coacervate emulsions (CC) might be considered as mineral precursors to foster remineralization of carious dental hard tissues. This study analyzed the instant effect of repeated infiltration of artificial caries lesions with a CC emulsion as well as the effects of subsequent exposure of CC-infiltrated lesions to demineralizing and remineralizing environments. METHODS: Bovine enamel specimens were partly covered with varnish to leave three exposed windows. Artificial enamel caries lesions were created (pH 4.95, 17d). Baseline controls (BL) were obtained by preparing a thin section of each specimen. Specimens were allocated to five groups. In three groups lesions were etched with 37 % phosphoric acid gel, infiltrated with dipotassium hydrogen phosphate and subsequently with a calcium coacervate emulsion, prepared by mixing CaCl2 ⋅ 2H2O with polyacrylic acid sodium salt (PAA-Na). Subsequently, the infiltration effect was either analyzed immediately (Inf.) or after exposition to either de- (Inf.+DS) or remineralizing solution (Inf.+RS) for 10 or 20 days, respectively. In two control groups specimens were exposed to either DS or RS, respectively without prior CC infiltration. Integrated mineral loss [ΔZ(vol%×µm)] was analyzed using transverse microradiography (TMR). RESULTS: Infiltration of enamel caries lesions with coacervate solution resulted in only subtle immediate mineral gain even if repeated. When exposed to demineralizing conditions, infiltrated lesions showed significantly less mineral loss compared to untreated controls (p < 0.05; Kruskal Wallis) and exhibited characteristic mineral depositions within the lesion body. CONCLUSIONS: While immediate mineral gain by infiltration was only modest, the CC-emulsion might be able to prevent demineralization in acidic conditions. CLINICAL SIGNIFICANCE: Calcium coacervates might act protective against further demineralization when infiltrated into enamel caries lesions.

Organic Nucleation: Water Rearrangement Reveals the Pathway of Ibuprofen.

The organic nucleation of the pharmaceutical ibuprofen is investigated, as triggered by the protonation of ibuprofen sodium salt at elevated pH. The growth and aggregation of nanoscale solution species by Analytical Ultracentrifugation and Molecular Dynamics (MD) simulations is tracked. Both approaches reveal solvated molecules, oligomers, and prenucleation clusters, their size as well as their hydration at different reaction stages. By combining surface-specific vibrational spectroscopy and MD simulations, water interacting with ibuprofen at the air-water interface during nucleation is probed. The results show the structure of water changes upon ibuprofen protonation in response to the charge neutralization. Remarkably, the water structure continues to evolve despite the saturation of protonated ibuprofen at the hydrophobic interface. This further water rearrangement is associated with the formation of larger aggregates of ibuprofen molecules at a late prenucleation stage. The nucleation of ibuprofen involves ibuprofen protonation and their hydrophobic assembly. The results highlight that these processes are accompanied by substantial water reorganization. The critical role of water is possibly relevant for organic nucleation in aqueous environments in general.

Nanocrystalline and Amorphous Calcium Carbonate from Waste Seashells by Ball Milling Mechanochemistry Processes.

Nanocrystalline calcium carbonate (CaCO3) and amorphous CaCO3 (ACC) are materials of increasing technological interest. Nowadays, they are mainly synthetically produced by wet reactions using CaCO3 reagents in the presence of stabilizers. However, it has recently been discovered that ACC can be produced by ball milling calcite. Calcite and/or aragonite are the mineral phases of mollusk shells, which are formed from ACC precursors. Here, we investigated the possibility to convert, on a potentially industrial scale, the biogenic CaCO3 (bCC) from waste mollusk seashells into nanocrystalline CaCO3 and ACC. Waste seashells from the aquaculture species, namely oysters (Crassostrea gigas, low-Mg calcite), scallops (Pecten jacobaeus, medium-Mg calcite), and clams (Chamelea gallina, aragonite) were used. The ball milling process was carried out by using different dispersing solvents and potential ACC stabilizers. Structural, morphological, and spectroscopic characterization techniques were used. The results showed that the mechanochemical process produced a reduction of the crystalline domain sizes and formation of ACC domains, which coexisted in microsized aggregates. Interestingly, bCC behaved differently from the geogenic CaCO3 (gCC), and upon long milling times (24 h), the ACC reconverted into crystalline phases. The aging in diverse environments of mechanochemically treated bCC produced a mixture of calcite and aragonite in a species-specific mass ratio, while the ACC from gCC converted only into calcite. In conclusion, this research showed that bCC can produce nanocrystalline CaCO3 and ACC composites or mixtures having species-specific features. These materials can enlarge the already wide fields of applications of CaCO3, which span from medical to material science.

Thermostable protein-stabilized gold nanoclusters as a peroxidase mimic.

Protein-stabilized gold nanoclusters (AuNCs) are fascinating nanostructures with exciting properties owing to their ultra-small sizes and functional shell. However, their applications under extreme conditions are still complicated, waiting for programmable solutions. Therefore, the design of a multi-functional protein stabilizer for specific purposes gains attention to improve the stability and functionality of AuNCs. Herein, we exploited the thermostability of genetically engineered KlenTaq DNA polymerase containing five cysteine residues (KTQ5C) to synthesize heat-stable AuNCs (AuNC@KTQ5C) and characterize optical, structural, and hydrodynamic properties. Besides their excellent photophysical properties, AuNC@KTQ5C also exhibit superior peroxidase-like (POD-like) catalytic activity following typical Michaelis-Menten kinetics together with a high affinity towards the POD substrate 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)-diammonium salt (ABTS). Moreover, FTIR and relative catalytic activity analysis of AuNC@KTQ5C reveal that KTQ5C is resistant to changes in protein secondary structure while the AuNCs conserve 70-80% of their catalytic performance after heat treatments up to more than 80 °C. Our findings show that stabilizing AuNCs with thermostable KTQ5C not only preserves the advantages of protein-stabilized AuNCs but can also promote the resistance of AuNCs against aggregation due to protein denaturation under extreme reaction temperatures, protecting their fluorescent emission or catalytic activity.

Computational assessment of the potential of cross-catalytic coprecipitating systems for the bottom-up design of nanocomposites.

The production of nanocomposites is often economically and environmentally costly. Silica-witherite biomorphs, known for producing a wealth of life-like shapes, are nanocomposites entirely formed through self-organization processes. Behind these precipitates are two precipitation reactions that catalyze each other. Using a simple computational approach, we show here that this type of chemical system - defined here as Cross-Catalytic Coprecipitating Systems (CCCSs) - is of great interest to material design. Provided that cross-catalytic effects are sufficient to overcome the precipitation thresholds for each phase, all CCCSs can be expected to self-organize into nanocomposite materials through a one-pot, one-step synthesis protocol. Symmetry-breaking events generating various complex, ordered textures are predicted in CCCSs involving crystalline phases. While high levels of stochasticity lead to a loss of ordering, coprecipitation is found to be robust to diffusion or advection in the solution. This model shows that a couple of chemical reactions can generate a range of complex textures - with possibly distinct physical/chemical properties. Cross-catalytic coprecipitating systems consequently represent a promising avenue for producing nanocomposites with complex textures at reduced economic and environmental costs.

Localized Crystallization of Calcium Phosphates by Light-Induced Processes.

Medical treatment options for bones and teeth can be significantly enhanced by taking control over the crystallization of biomaterials like hydroxyapatite in the healing process. Light-induced techniques are particularly interesting for this approach as they offer tremendous accuracy in spatial resolution. However, in the field of calcium phosphates, light-induced crystallization has not been investigated so far. Here, proof of principle is established to successfully induce carbonate-hydroxyapatite precipitation by light irradiation. Phosphoric acid is released by a photolabile molecule exclusively after irradiation, combining with calcium ions to form a calcium phosphate in the crystallization medium. 4-Nitrophenylphosphate (4NPP) is established as the photolabile molecule and the system is optimized and fully characterized. A calcium phosphate is crystallized exclusively by irradiation in aqueous solution and identified as carbonate apatite. Control over the localization and stabilization of the carbonate apatite is achieved by a pulsed laser, triggering precipitation in calcium and 4NPP-containing gel matrices. The results of this communication open up a wide range of new opportunities, both in the field of chemistry for more sophisticated reaction control in localized crystallization processes and in the field of medicine for enhanced treatment of calcium phosphate containing biomaterials.

Toward Understanding the Formation Mechanism and OER Catalytic Mechanism of Hydroxides by In Situ and Operando Techniques.

Developing efficient and affordable electrocatalysts for the sluggish oxygen evolution reaction (OER) remains a significant barrier that needs to be overcome for the practical applications of hydrogen production via water electrolysis, transforming CO2 to value-added chemicals, and metal-air batteries. Recently, hydroxides have shown promise as electrocatalysts for OER. In situ or operando techniques are particularly indispensable for monitoring the key intermediates together with understanding the reaction process, which is extremely important for revealing the formation/OER catalytic mechanism of hydroxides and preparing cost-effective electrocatalysts for OER. However, there is a lack of comprehensive discussion on the current status and challenges of studying these mechanisms using in situ or operando techniques, which hinders our ability to identify and address the obstacles present in this field. This review offers an overview of in situ or operando techniques, outlining their capabilities, advantages, and disadvantages. Recent findings related to the formation mechanism and OER catalytic mechanism of hydroxides revealed by in situ or operando techniques are also discussed in detail. Additionally, some current challenges in this field are concluded and appropriate solution strategies are provided.

A sustainable one-pot method to transform seashell waste calcium carbonate to osteoinductive hydroxyapatite micro-nanoparticles.

We have developed a straightforward, one-pot, low-temperature hydrothermal method to transform oyster shell waste particles (bCCP) from the species Crassostrea gigas (Mg-calcite, 5 wt% Mg) into hydroxyapatite (HA) micro/nanoparticles. The influence of the P reagents (H3PO4, KH2PO4, and K2HPO4), P/bCCP molar ratios (0.24, 0.6, and 0.96), digestion temperatures (25-200 °C), and digestion times (1 week-2 months) on the transformation process was thoroughly investigated. At 1 week, the minimum temperature to yield the full transformation significantly reduced from 160 °C to 120 °C when using K2HPO4 instead of KH2PO4 at a P/bCCP ratio of 0.6, and even to 80 °C at a P/bCCP ratio of 0.96. The transformation took place via a dissolution-reprecipitation mechanism driven by the favorable balance between HA precipitation and bCCP dissolution, due to the lower solubility product of HA than that of calcite at any of the tested temperatures. Both the bCCP and the derived HA particles were cytocompatible for MG-63 human osteosarcoma cells and m17.ASC murine mesenchymal stem cells, and additionally, they promoted the osteogenic differentiation of m17.ASC, especially the HA particles. Because of their physicochemical features and biological compatibility, both particles could be useful osteoinductive platforms for translational applications in bone tissue engineering.

Biodegradable Mineral Plastics.

Mineral plastics are a promising class of bio-inspired materials that offer exceptional properties, like self-heal ability, stretchability in the hydrogel state, and high hardness, toughness, transparency, and non-flammability in the dry state along with reversible transformation into the hydrogel by addition of water. This enables easy reshape-ability and recycling like the solubility in mild acids to subsequently form mineral plastics again by base addition. However, current mineral plastics rely on petrochemistry, are hardly biodegradable, and thus persistent in nature. This work presents the next generation of mineral plastics, which are bio-based and biodegradable, making them a promising, new class of polymers for the development of environmentally friendly materials. Physically cross-linked (poly)glutamic-acid (PGlu)-based mineral plastics are synthesized using various alcohol-water mixtures, metal ion ratios and molecular weights. The rheological properties are easily adjusted using these parameters. The general procedure involves addition of equimolar solution of CaCl2 to PGlu in equal volumes followed by addition of iPrOH (iPrOH:H2 O = 1:1) under vigorous stirring conditions. The ready biodegradability of PGlu/CaFe mineral plastic is confirmed in this study where the elements N, Ca, and Fe present in it tend to act as additional nutrients, supporting the growth of microorganisms and consequently, promoting the biodegradation process.

The Structure, Preparation, Characterization, and Intercalation Mechanism of Layered Hydroxides Intercalated with Guest Anions.

Since the intercalation of anions into layered hydroxides (LHs) has a great impact not only on their nucleation and growth but also on their structure, composition, and size, the intercalation chemistry of LHs has aroused the strong interest of researchers. However, the progress in the fundamental understanding of LHs intercalated with guest anions have not been paralleled by a concomitant development of the preparation and performance improvement of such materials. Considering the guidance of a timely in-depth review for scientists in this area, a systematic introduction about the development that is made on the above-mentioned issues is highly needed but yet missing so far. Herein, recent advances in understanding the chemical composition and structure of LHs intercalated with guest anions are systematically summarized. Meanwhile, typical and emerging bottom-up synthesis methods of LHs intercalated with anions are reviewed, and the potential impact of external reaction parameters on the intercalation of anions into LHs are discussed . Besides, different analytical characterization techniques employed in the examination of guest anion-intercalated LHs are deliberated upon. Finally, although progress is slow in exploring the intercalation mechanism, as many examples as possible are included in this review and inferred the possible intercalation mechanism.

Formation of Amorphous Iron-Calcium Phosphate with High Stability.

Amorphous iron-calcium phosphate (Fe-ACP) plays a vital role in the mechanical properties of teeth of some rodents, which are very hard, but its formation process and synthetic route remain unknown. Here, the synthesis and characterization of an iron-bearing amorphous calcium phosphate in the presence of ammonium iron citrate (AIC) are reported. The iron is distributed homogeneously on the nanometer scale in the resulting particles. The prepared Fe-ACP particles can be highly stable in aqueous media, including water, simulated body fluid, and acetate buffer solution (pH 4). In vitro study demonstrates that these particles have good biocompatibility and osteogenic properties. Subsequently, Spark Plasma Sintering (SPS) is utilized to consolidate the initial Fe-ACP powders. The results show that the hardness of the ceramics increases with the increase of iron content, but an excess of iron leads to a rapid decline in hardness. Calcium iron phosphate ceramics with a hardness of 4 GPa can be achieved, which is higher than that of human enamel. Furthermore, the ceramics composed of iron-calcium phosphates show enhanced acid resistance. This study provides a novel route to prepare Fe-ACP, and presents the potential role of Fe-ACP in biomineralization and as starting material to fabricate acid-resistant high-performance bioceramics.

Two Types of Liquid Phase Separation Induced by Soft Centrifugation in Aqueous Ethyl Acetate Using Ethanol as Cosolvent.

Water/ethyl acetate/ethanol is widely used as a "green" extractant system. We show that 2 different types of phase separation can be induced upon centrifugation in this ternary system using ethanol as a cosolvent of water and ethyl acetate: centrifuge-induced criticality and centrifuge-induced emulsification. The expected composition profiles of samples after centrifugation can be represented by bent lines in a ternary phase diagram when gravitational energy is added to the free energy of mixing. The experimental equilibrium composition profiles behave qualitatively as expected and can be predicted using a phenomenological theory of mixing. The concentration gradients are small except near the critical point, as expected for small molecules. Nevertheless, they are usable when accompanied by temperature cycles. These findings open new possibilities of centrifugal separation, even if control is delicate during temperature cycles. These schemes are accessible even at relatively low centrifugation speed for molecules that float and sediment with apparent molar masses several hundred times larger than the molecular mass.

Silica-Functionalized Nanolimes for the Conservation of Stone Heritage.

The relatively recent development of nanolimes (i.e., alcoholic dispersions of Ca(OH)2 nanoparticles) has paved the way for new approaches to the conservation of important art works. Despite their many benefits, nanolimes have shown limited reactivity, back-migration, poor penetration, and lack of proper bonding to silicate substrates. In this work a novel solvothermal synthesis process is presented by which extremely reactive nanostructured Ca(OH)2 particles are obtained using calcium ethoxide as the main precursor species. Moreover, it is demonstrated that this material can be easily functionalized with silica-gel derivatives under mild synthesis conditions, thereby preventing particle growth, increasing total specific surface area, enhancing reactivity, modifying colloidal behavior, and functioning as self-integrated coupling agents. Additionally, the formation of calcium silicate hydrate (CSH) nanocement is promoted by the presence of water, resulting in optimal bonding when applied to silicate substrates, as evidenced by the higher reinforcement effect produced on treated Prague sandstone specimens as compared to those consolidated with nonfunctionalized commercial nanolime. The functionalization of nanolimes is not only a promising strategy for the design of optimized consolidation treatments for the cultural heritage, but may also have important implications for the development of advanced nanomaterials for building, environmental, or biomedical applications.

Phage Display Screening as a Rational Approach to Design Additives for Selective Crystallization Control in Construction Systems.

The design of additives showing strong and selective interactions with certain target surfaces is key to crystallization control in applied reactive multicomponent systems. While suitable chemical motifs can be found through semi-empirical trial-and-error procedures, bioinspired selection techniques offer a more rationally driven approach and explore a much larger space of possible combinations in a single assay. Here, phage display screening is used to characterize the surfaces of crystalline gypsum, a mineral of broad relevance for construction applications. Based on next-generation sequencing of phages enriched during the screening process, a triplet of amino acids, DYH, is identified as the main driver for adsorption on the mineral substrate. Furthermore, oligopeptides containing this motif prove to exert their influence in a strictly selective manner during the hydration of cement, where the sulfate reaction (initial setting) is strongly retarded while the silicate reaction (final hardening) remains unaffected. In the final step, these desired additive characteristics are successfully translated from the level of peptides to that of scalable synthetic copolymers. The approach described in this work demonstrates how modern biotechnological methods can be leveraged for the systematic development of efficient crystallization additives for materials science.

A Nanoparticle-Based Model System for the Study of Heterogeneous Nucleation Phenomena.

Heterogeneous nucleation processes are involved in many important phenomena in nature, including devastating human diseases caused by amyloid structures or the harmful frost formed on fruits. However, understanding them is challenging due to the difficulties of characterizing the initial stages of the process occurring at the interface between the nucleation medium and the substrate surfaces. This work implements a model system based on gold nanoparticles to investigate the effect of particle surface chemistry and substrate properties on heterogeneous nucleation processes. Using widely available techniques such as UV-vis-NIR spectroscopy and light microscopy, gold nanoparticle-based superstructure formation was studied in the presence of substrates with different hydrophilicity and electrostatic charges. The results were evaluated on grounds of classical nucleation theory (CNT) to reveal kinetic and thermodynamic contributions of the heterogeneous nucleation process. In contrast to nucleation from ions, the kinetic contributions toward nucleation turned out to be larger than the thermodynamic contributions for the nanoparticle building blocks. Electrostatic interactions between substrates and nanoparticles with opposite charges were crucial to enhancing the nucleation rates and decreasing the nucleation barrier of superstructure formation. Thereby, the described strategy is demonstrated advantageous for characterizing physicochemical aspects of heterogeneous nucleation processes in a simple and accessible manner, which could be potentially explored to study more complex nucleation phenomena.

Penetration Coefficients of Commercial Nanolimes and a Liquid Mineral Precursor for Pore-Imitating Test Systems-Predictability of Infiltration Behavior.

Nanolimes have been commercially available for over a decade as a remineralization agent for natural stone to combat deterioration. While they have been applied successfully and studied extensively, their penetration abilities in different materials have not yet been readily quantifiable in situ and in real time. Using two transparent pore-imitating test systems (acrylic glass (PMMA) and polydimethylsiloxane (PDMS)) and light microscopy, the penetration coefficients (PCs) of two nanolimes (CaLoSiL (CLS) and Nanorestore Plus (NRP)), as well as their solvents, were determined experimentally in square channels of about 100 µm diameter. Their PCs and those for a previously published glass-resin-based test system were also predicted based on measurable material parameters or literature values using the Lucas-Washburn equation. Additionally, a liquid mineral precursor (LMP) of calcium carbonate based on complex coacervation (CC) was investigated as an alternative to the solid particle dispersions of nanolime. In general, the dispersions behaved like their pure solvents. Overall, trends could be reasonably well predicted with both literature and experimentally determined properties using the Lucas-Washburn equation. In absolute terms, the prediction of observed infiltration behavior was satisfactory for alcohols and nanolimes but deviated substantially for water and the aqueous LMP. The commercially available PMMA chips and newly designed PDMS devices were mostly superior to the previously published glass-resin-based test system, except for the long-term monitoring of material deposition. Lastly, the transfer of results from these investigated systems to a different, nontransparent mineral, calcite, yielded similar PC values independently of the original data when used as the basis for the conversion (all PC types and all material/liquid combinations except aqueous solutions in PDMS devices). This knowledge can be used to improve the targeted design of tailor-made remineralization treatments for different application cases by guiding solvent choice, and to reduce destructive sampling by providing a micromodel for pretesting, if transferability to real stone samples proves demonstrable in the future.