Bulk, cascaded pulse compression scheme and its application to spin emitter characterization.

The 35-fs-long pulses of a commercial Ti:sapphire amplifier are compressed to ∼20fs via self-phase modulation in bulk glass substrates. The cascading of both nonlinear broadening and dispersion compensation stages makes use of the increasing peak power in the successive nonlinear stages. As an application example, the compressed pulses are used for electro-optical sampling of terahertz waves created by optically pumped thin-film spin emitters.

µJ-level multi-cycle terahertz generation in a periodically poled Rb:KTP crystal.

We demonstrate multi-cycle terahertz (MC-THz) generation in a 15.5 mm long periodically poled rubidium (Rb)-doped potassium titanyl phosphate (Rb:PPKTP) crystal with a poling period of 300 µm. By cryogenically cooling the crystal to 77 K, up to 0.72 µJ terahertz energy is obtained at a frequency of 0.5 THz with a 3 GHz bandwidth. A maximum internal optical-to-terahertz conversion efficiency of 0.16% is achieved, which is comparable with results achieved using periodically poled lithium niobate crystal. Neither photorefractive effects nor damage was observed with up to 900mJ/cm2, showing the great potential of Rb:PPKTP for multi-millijoule-level MC-THz generation.

Novel method for the angular chirp compensation of passively CEP-stable few-cycle pulses.

We demonstrate a novel, energy-efficient, cost-effective simple method for seeding CEP-stable OPCPAs. We couple the CEP-stable idler of a broadband OPCPA into a hollow core Kagome fiber thus compensating for the angular chirp. We obtain either relatively narrow bandwidths with ∼36% coupling efficiency or quarter-octave spanning bandwidths with ∼2.2% coupling efficiency. We demonstrate spectral compressibility, good beam quality and CEP stability. Our source is an ideal seed for high-energy, high-average power, CEP-stable few-cycle OPCPA pulses around 2 µm, which can drive the generation of coherent soft X-ray radiation in the water window spectral region via HHG.

Spectral phase control of interfering chirped pulses for high-energy narrowband terahertz generation.

Highly-efficient optical generation of narrowband terahertz radiation enables unexplored technologies and sciences from compact electron acceleration to charge manipulation in solids. State-of-the-art conversion efficiencies are currently achieved using difference-frequency generation driven by temporal beating of chirped pulses but remain, however, far lower than desired or predicted. Here we show that high-order spectral phase fundamentally limits the efficiency of narrowband difference-frequency generation using chirped-pulse beating and resolve this limitation by introducing a novel technique based on tuning the relative spectral phase of the pulses. For optical terahertz generation, we demonstrate a 13-fold enhancement in conversion efficiency for 1%-bandwidth, 0.361 THz pulses, yielding a record energy of 0.6 mJ and exceeding previous optically-generated energies by over an order of magnitude. Our results prove the feasibility of millijoule-scale applications like terahertz-based electron accelerators and light sources and solve the long-standing problem of temporal irregularities in the pulse trains generated by interfering chirped pulses.

Enhanced high-harmonic generation up to the soft X-ray region driven by mid-infrared pulses mixed with their third harmonic.

We systematically study the efficiency enhancement of high-harmonic generation (HHG) in an Ar gas cell up to the soft X-ray (SXR) range using a two-color laser field composed of 2.1 µm (ω) and 700 nm (3ω) with parallel linear polarization. Our experiment follows the recent theoretical investigations that determined two-color mid-infrared (IR) pulses, mixed with their third harmonic (ω + 3ω), to be close to optimal driving waveforms for enhancing HHG efficiency in the SXR region [Jin et al., Nature Comm. 5, 4003 (2014)]. We observed sub-optical-cycle-dependent efficiency enhancements of up to 8.2 of photon flux integrated between 20 - 70 eV, and up to 2.2 between 85 - 205 eV. Enhancement of HHG efficiency was most pronounced for the lowest tested backing pressure (≈ 140 mbar), and decreased monotonically as the pressure was increased. The single-color (ω)-driven HHG was optimal at the highest backing pressure tested in the experiment (≈ 375 mbar). Our numerical simulations based on single-atom response and 3D pulse propagation show good qualitative agreement with experimental observations. The lower enhancement at high pressure and higher photon energy indicates that phase matching of two-color-driven HHG is more sensitive to ionization rate and pulse propagation effects than the single-color case. We show that with further improvements to the relative phase jitter and the spatio-temporal overlap of the two beams, the efficiency enhancement could be further improved by at least a factor of ≈ 2.

Segmented Terahertz Electron Accelerator and Manipulator (STEAM).

Acceleration and manipulation of electron bunches underlie most electron and X-ray devices used for ultrafast imaging and spectroscopy. New terahertz-driven concepts offer orders-of-magnitude improvements in field strengths, field gradients, laser synchronization and compactness relative to conventional radio-frequency devices, enabling shorter electron bunches and higher resolution with less infrastructure while maintaining high charge capacities (pC), repetition rates (kHz) and stability. We present a segmented terahertz electron accelerator and manipulator (STEAM) capable of performing multiple high-field operations on the 6D-phase-space of ultrashort electron bunches. With this single device, powered by few-micro-Joule, single-cycle, 0.3 THz pulses, we demonstrate record THz-acceleration of >30 keV, streaking with <10 fs resolution, focusing with >2 kT/m strength, compression to ~100 fs as well as real-time switching between these modes of operation. The STEAM device demonstrates the feasibility of THz-based electron accelerators, manipulators and diagnostic tools enabling science beyond current resolution frontiers with transformative impact.

Wavefront analysis of a white-light supercontinuum.

The wavefront quality of white-light supercontinuum is crucial for applications like waveform synthesis or imaging. It has been here generated by 1030 nm centered sub-picosecond pulses in YAG and characterized with a Shack-Hartmann wavefront sensor across different parts of the spectrum. It shows a good wavefront quality of λ/11 and little dependence on the wavelength of the supercontinuum. The wavefront deformations are transferred from the driver laser wavefront to the supercontinuum independently of the wavelength.

40-µJ passively CEP-stable seed source for ytterbium-based high-energy optical waveform synthesizers.

We demonstrate experimentally for the first time a ~40-µJ two-octave-wide passively carrier-envelope phase (CEP)-stable parametric front-end for seeding an ytterbium (Yb)-pump-based, few-optical-cycle, high-energy optical parametric waveform synthesizer. The system includes a CEP-stable white-light continuum and two-channel optical parametric chirped pulse amplifiers (OPCPAs) in the near- and mid-infrared spectral regions spanning altogether a two-octave-wide spectrum driven by a regenerative amplifier. The output pulses are compressed and fully characterized to demonstrate the well-behaved spectral phase of this seed source.

Optical generation of single-cycle 10 MW peak power 100 GHz waves.

We demonstrate the generation of 100 GHz single-cycle pulses with up to 10 MW of peak power using optical rectification and broadband phase matching via the tilted pulse front (TPF) technique in lithium niobate. The optical driver is a cryogenically cooled Yb:YAG amplifier providing tens of mJ energy, ~5 ps long laser pulses. We obtain a high THz pulse energy up to 65 µJ with 31.6 MV/m peak electric field when focused close to its diffraction limit of 2.5 mm diameter. A high optical-to-THz energy conversion efficiency of 0.3% at 85 K is measured in agreement with numerical simulations. This source is of great interest for a broad range of applications, such as nonlinear THz field-matter interaction and charged particle acceleration for ultrafast electron diffraction and table-top X-ray sources.

Overcoming bifurcation instability in high-repetition-rate Ho:YLF regenerative amplifiers.

We demonstrate a Ho:YLF regenerative amplifier (RA) overcoming bifurcation instability and consequently achieving high extraction energies of 6.9 mJ at a repetition rate of 1 kHz with pulse-to-pulse fluctuations of 1.1%. Measurements of the output pulse energy, corroborated by numerical simulations, identify an operation point (OP) that allows high-energy pulse extraction at a minimum noise level. Complete suppression of the onset of bifurcation was achieved by gain saturation after each pumping cycle in the Ho:YLF crystal via lowering the repetition rate and cooling the crystal. Even for moderate cooling, a significant temperature dependence of the Ho:YLF RA performance was observed.

Cryogenic Yb:YAG composite-thin-disk for high energy and average power amplifiers.

A cryogenic composite-thin-disk amplifier with amplified spontaneous emission (ASE) rejection is implemented that overcomes traditional laser system problems in high-energy pulsed laser drivers of high average power. A small signal gain of 8 dB was compared to a 1.5 dB gain for an uncapped thin-disk without ASE mitigation under identical pumping conditions. A strict image relayed 12-pass architecture using an off-axis vacuum telescope and polarization switching extracted 100 mJ at 250 Hz in high beam quality stretched 700 ps pulses of 0.6-nm bandwidth.

White-light generation with sub-ps pulses.

We generate white light supercontinuum from slightly sub-picosecond pulses at 1.03 µm and 515 nm. We compare the spectra and stability for various crystals, focusing conditions and pulse durations, and determine the best parameters for sub-picosecond driver pulse duration. Comparing the experimental observations with the theory of white-light generation from Brodeur and Chin, it appears that in this particular range of pump pulse duration, two mechanisms interact and prevent a catastrophic collapse of the beam: multi-photon excitation (typical for ~100-fs-long pulses) and avalanche ionization (typical for >1-ps pulses). The two processes both manifest themselves in different experimental observations.

High-energy, kHz, picosecond hybrid Yb-doped chirped-pulse amplifier.

We report on a diode-pumped, hybrid Yb-doped chirped-pulse amplification (CPA) laser system with a compact pulse stretcher and compressor, consisting of Yb-doped fiber preamplifiers, a room-temperature Yb:KYW regenerative amplifier (RGA), and cryogenic Yb:YAG multi-pass amplifiers. The RGA provides a relatively broad amplification bandwidth and thereby a long pulse duration to mitigate B-integral in the CPA chain. The ~1030-nm laser pulses are amplified up to 70 mJ at 1-kHz repetition rate, currently limited by available optics apertures, and then compressed to ~6 ps with high efficiency. The near-diffraction-limited beam focusing quality is demonstrated with M(x)(2) = 1.1 and M(y)(2) = 1.2. The shot-to-shot energy fluctuation is as low as ~1% (rms), and the long-term energy drift and beam pointing stability for over 8 hours measurement are ~3.5% and <6 µrad (rms), respectively. To the best of our knowledge, this hybrid laser system produces the most energetic picosecond pulses at kHz repetition rates among rod-type laser amplifiers. With an optically synchronized Ti:sapphire seed laser, it provides a versatile platform optimized for pumping optical parametric chirped-pulse amplification systems as well as driving inverse Compton scattered X-rays.

High-energy kHz Yb:KYW dual-crystal regenerative amplifier.

A highly stable Yb:KYW based dual crystal regenerative amplifier is demonstrated, which generates at 1 kHz 6.5-mJ pulses before and up to 4.7-mJ sub-ps pulses after compression with multilayer-dielectric gratings, respectively. The stretcher is compact and based on chirped-fiber Bragg gratings. In continuous-wave operation, 20 W are extracted with a slope efficiency of 40%. The experimental data are in agreement with detailed simulations of the laser dynamics.

Highly efficient broadband sum-frequency generation in the visible wavelength range.

We report on efficient broadband sum-frequency generation, converting a 140 THz near-infrared bandwidth to the visible regime with photon conversion efficiency greater than 90%. Using a 20-mm-long aperiodically adiabatively poled KTP crystal, the spectral range 660-990 nm was converted to 405-500 nm using a strong pump wave at 1030 nm. The photon conversion efficiency was confirmed to be 92±0.5% when pumped with an intensity of 0.94 GW/cm2. Our experimental results agreed very well with analytic predictions and numerical simulations.

Dual-crystal Yb:CALGO high power laser and regenerative amplifier.

This paper reports on a high-power dual-crystal Yb:CALGO laser head with greatly reduced sensitivity to thermal lensing in the gain medium. In continuous-wave operation 23 W of power were extracted from 2% doped crystals, and tunablity between 1018 nm and 1060 nm was demonstrated. This is the highest output power reported from a bulk Yb:CALGO laser to date, as well as the demonstration of the broadest tuning range. 4 mJ pulses at 1040 nm were achieved in cavity-dumped operation with quasi-CW pumping at 1 kHz repetition rate with nearly diffraction-limited beam quality. When seeded at 1030 nm with stretched femtosecond pulses, 3 mJ were achieved.