Pulsed-field ablation versus thermal ablation for atrial fibrillation: A meta-analysis.

Background: Pulsed-field ablation (PFA) is an alternative to thermal ablation (TA) in patients with atrial fibrillation (AF) receiving catheter-based therapy for pulmonary vein isolation (PVI). However, its efficacy and safety have yet to be fully elucidated. Objective: The purpose of this study was to compare the acute and long-term efficacies and safety of PFA and TA. Methods: We performed a systematic review and meta-analysis of randomized and nonrandomized controlled trials comparing PFA and TA in patients with AF undergoing their first PVI ablation. The TA group was divided into cryoballoon (CB) and radiofrequency subgroups. AF patients were divided into paroxysmal atrial fibrillation (PAF) and persistent atrial fibrillation (PersAF) subgroups for further analysis. Results: Eighteen studies involving 4998 patients (35.2% PFA) were included. Overall, PFA was associated with a shorter procedure time (mean difference [MD] -21.68; 95% confidence interval [CI] -32.81 to -10.54) but longer fluoroscopy time (MD 4.53; 95% CI 2.18-6.88) than TA. Regarding safety, lower (peri-)esophageal injury rates (odds ratio [OR] 0.17; 95% CI 0.06-0.46) and higher tamponade rates (OR 2.98; 95% CI 1.27-7.00) were observed after PFA. In efficacy assessment, PFA was associated with a better first-pass isolation rate (OR 6.82; 95% CI 1.37-34.01) and a lower treatment failure rate (OR 0.83; 95% CI 0.70-0.98). Subgroup analysis showed no differences in PersAF and PAF. CB was related to higher (peri)esophageal injury, and lower PVI acute success and procedural time. Conclusion: Compared to TA, PFA showed better results with regard to acute and long-term efficacy but significant differences in safety, with lower (peri)esophageal injury rates but higher tamponade rates in procedural data.

Blue-green infrastructure in view of Integrated Urban Water Management: A novel assessment of an effectiveness index.

Addressing urban water management challenges requires a holistic view. Sustainable approaches such as blue-green infrastructure (BGI) provide several benefits, but assessing their effectiveness demands a systemic approach. Challenges are magnified in informal areas, leading to the combination of integrated urban water management (IUWM) with BGI as a proposed solution by this research. We employed the Urban Water Use (UWU) model to assess the effectiveness index (EI) of BGI measures in view of IUWM after stakeholder consultation. The procedure in this novel assessment includes expert meetings for scenario building and resident interviews to capture the community's vision. To assess the impact of IUWM on the effectiveness of BGI measures, we proposed a simulation with BGI only and then three simulations with improvements to the water and sewage systems. The results of the EI analysis reveal a substantial improvement in the effectiveness of BGI measures through IUWM combination. Moreover, we offer insights into developing strategies for UWU model application in informal settlements, transferrable to diverse urban areas. The findings hold relevance for policymakers and urban planners, aiding informed decisions in urban water management.

Relevance of tyre wear particles to the total content of microplastics transported by runoff in a high-imperviousness and intense vehicle traffic urban area.

Microplastics (MPs) are an emerging pollutant and a worldwide issue. A wide variety of MPs and tyre wear particles (TWPs) are entering and spreading in the environment. TWPs can reach waterbodies through runoff, where main contributing particulate matter comes from impervious areas. In this paper, TWPs and other types of MPs that were transported with the runoff of a high populated-impervious urban area were characterised. Briefly, MPs were sampled from sediments in a stormwater detention reservoir (SDR) used for flood control of a catchment area of ∼36 km2, of which 73% was impervious. The sampled SDR is located in São Paulo, the most populated city in South America. TWPs were the most common type of MPs in this SDR, accounting for 53% of the total MPs; followed by fragments (30%), fibres (9%), films (4%) and pellets (4%). In particular, MPs in the size range 0.1 mm-0.5 mm were mostly TWPs. Such a profile of MPs in the SDR is unlike what is reported in environmental compartments elsewhere. TWPs were found at levels of 2160 units/(kg sediment·km2 of impervious area) and 87.8 units/(kg sediment·km street length); MP and TWP loadings are introduced here for the first time. The annual flux of MPs and TWPs were 7.8 × 1011 and 4.1 × 1011 units/(km2·year), respectively, and TWP emissions varied from 43.3 to 205.5 kg/day. SDRs can be sites to intercept MP pollution in urban areas. This study suggests that future research on MP monitoring in urban areas and design should consider both imperviousness and street length as important factors to normalize TWP contribution to urban pollution.

Temporal and Spatiotemporal Arboviruses Forecasting by Machine Learning: A Systematic Review.

Arboviruses are a group of diseases that are transmitted by an arthropod vector. Since they are part of the Neglected Tropical Diseases that pose several public health challenges for countries around the world. The arboviruses' dynamics are governed by a combination of climatic, environmental, and human mobility factors. Arboviruses prediction models can be a support tool for decision-making by public health agents. In this study, we propose a systematic literature review to identify arboviruses prediction models, as well as models for their transmitter vector dynamics. To carry out this review, we searched reputable scientific bases such as IEE Xplore, PubMed, Science Direct, Springer Link, and Scopus. We search for studies published between the years 2015 and 2020, using a search string. A total of 429 articles were returned, however, after filtering by exclusion and inclusion criteria, 139 were included. Through this systematic review, it was possible to identify the challenges present in the construction of arboviruses prediction models, as well as the existing gap in the construction of spatiotemporal models.

Closed-loop organic waste management systems for family farmers in Brazil.

Family farmers in Brazil could diversify their sources of income and improve agriculture practices by adopting circular economy principles on their farms. Closed-loop technological systems can be used to manage organic waste and produce fertiliser and biogas thereby generating revenue. Anaerobic Digestion (AD) is a proven technology that can produce digestate (i.e. fertiliser) and biogas from organic waste, although digestate application in soil and crops without treatment can have adverse effects. However, in practice, there is a lack of knowledge about the benefits of recycling organic waste in farming communities in Brazil. Therefore, the main aim of this paper is to provide conceptual design configurations of closed-loop systems that manage organic waste and generate revenue for small farms in Brazil. A literature review of selected technologies and interviews with Brazilian family farmers were used to inform the components of the proposed conceptual designs. The proposed designs are based on circular economy principles, incorporating AD, pyrolysis for biochar, hydroponics and vermifiltration in various configurations. A complete closed-loop system consisting of a 7.5 m3 digester, pyrolysis unit, a combined hydroponic and vermifilter unit and a shredder is estimated to cost around USD$1600 (R$ 6600). The flexibility of the proposed systems has the potential to increase resilience and income for small-scale farmers, whilst encouraging good practices for waste management. The conceptual designs can be used as a basis for further research and development of small-scale organic waste management solutions in Brazil.

Fenton pre-oxidation of natural organic matter in drinking water treatment through the application of iron nails.

This study investigated for the first time the efficiency of an advanced oxidation process (AOP) zero valent iron/hydrogen peroxide (ZVI/H2O2) employing iron nails for the removal of Natural Organic Matter (NOM) from natural water of Regent's Park lake, London, UK. The low cost of nails and their easy separation from the water after the treatment make this AOP attractive for water utilities in low- and middle-income countries. The process was investigated as a pre-oxidation step for drinking water treatment. Results showed that UV254 removal in the natural water was lower than that of simulated water containing commercial humic acid (HA), indicating a matrix effect. Statistical analysis confirmed the maximum removal of dissolved organic carbon (DOC) in natural water depends on the initial pH (best at 4.5) and H2O2 dosage (best at 100% excess of stoichiometric dosage). DOC and UV254 removals under this operational condition were 51% and 89%, respectively. Molecular weight (MW) and specific UV absorbance (SUVA254) were significantly reduced to 74% and 78%, respectively. Formation of Chloroform THM in natural water sample after the ZVI/H2O2 process (initial pH 4.5) was below the limit for drinking water, and 48% less than the THM formation in the same water not subjected to pre-oxidation. Characterization of oxidation products on the iron-nail-ZVI surface after the ZVI/H2O2 treatment by SEM, XRD, and XPS identified the formation of magnetite and lepidocrocite. Results suggest that the investigated ZVI/H2O2 process is a promising technology for removing NOM and reducing THM formation during drinking water treatment.

A review exploring the overarching burden of Zika virus with emphasis on epidemiological case studies from Brazil.

This paper explores the main factors for mosquito-borne transmission of the Zika virus by focusing on environmental, anthropogenic, and social risks. A literature review was conducted bringing together related information from this genre of research from peer-reviewed publications. It was observed that environmental conditions, especially precipitation, humidity, and temperature, played a role in the transmission. Furthermore, anthropogenic factors including sanitation, urbanization, and environmental pollution promote the transmission by affecting the mosquito density. In addition, socioeconomic factors such as poverty as well as social inequality and low-quality housing have also an impact since these are social factors that limit access to certain facilities or infrastructure which, in turn, promote transmission when absent (e.g., piped water and screened windows). Finally, the paper presents short-, mid-, and long-term preventative solutions together with future perspectives. This is the first review exploring the effects of anthropogenic aspects on Zika transmission with a special emphasis in Brazil.

Eficiência de um sistema piloto de dessalinização de água salobra / Efficiency of a brackish water desalination pilot system

RESUMO Com a escassez da disponibilidade de água doce e o aumento da demanda de água no mundo e no Brasil, uma das alternativas são os sistemas de dessalinização de água, que removem os sais das águas salobra ou salgada. Este estudo teve como objetivo avaliar a eficiência de um sistema piloto de dessalinização de água salobra a qual foi obtida a partir da mistura de águas do mar e de rio até atingir concentração de sólidos dissolvidos totais (SDT) de 1.500 mg.L-1. O sistema piloto de dessalinização, com capacidade de 1,0 m3.h-1, é composto de ultrafiltração (UF) e abrandamento como pré-tratamento à osmose reversa (OR). Foram realizadas análises de qualidade da água na entrada e saída das unidades de tratamento relativas a SDT, condutividade elétrica, turbidez, pH, cor aparente, alcalinidade, dureza total, cálcio, magnésio, cloreto, sulfato e temperatura. Foram avaliadas a pressão osmótica, o fluxo de filtração e a taxa de recuperação de água no sistema de OR. Com os resultados obtidos, conclui-se que a eficiência de remoção de SDT e condutividade foi de 99%. A UF foi eficiente na remoção de turbidez, enquanto a OR apresentou maiores eficiências de remoção de sais. O sistema piloto de tratamento foi capaz de remover todos os parâmetros estudados. A taxa de recuperação na OR foi de 74,64%.

ABSTRACT Considering the shortage of fresh water availability and an increased demand for water in the world, including Brazil, one of the alternatives for water supply are water desalination systems, which remove salts from brackish or seawater. The objective of this study was to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration. The pilot desalination plant with production capacity of 1.0 m3 h-1 is composed of ultrafiltration (UF) and softener working as a pre-treatment to reverse osmosis (RO). Experiments were performed to analyze some water quality parameters as TDS, electrical conductivity, turbidity, pH, apparent color, alkalinity, total hardness, calcium, magnesium, chlorides, sulfates, and temperature. Osmotic pressure, filtration flow and water recovery rate were also measured for the RO. Analyzing the result obtained, it can be concluded that the efficiency of TDS removal and conductivity were 99%. UF was efficient in removing turbidity, whereas RO reached higher salt removal efficiencies. The pilot plant system could remove all water quality parameters studied. Recovery rate in RO was 74.64%.

Performance assessment of water reuse strategies using integrated framework of urban water metabolism and water-energy-pollution nexus.

This paper evaluates the metabolism-based performance of a number of centralised and decentralised water reuse strategies and their impact on integrated urban water systems (UWS) based on the nexus of water-energy-pollution. The performance assessment is based on a comprehensive and quantitative framework of urban water metabolism developed for integrated UWS over a long-term planning horizon. UWS performance is quantified based on the tracking down of mass balance flows/fluxes of water, energy, materials, costs, pollutants, and other environmental impacts using the WaterMet2 tool. The assessment framework is defined as a set of key performance indicators (KPIs) within the context of the water-energy-pollution nexus. The strategies comprise six decentralised water reuse configurations (greywater or domestic wastewater) and three centralised ones, all within three proportions of adoption by domestic users (i.e. 20, 50, and 100%). This methodology was demonstrated in the real-world case study of San Francisco del Rincon and Purisima del Rincon cities in Mexico. The results indicate that decentralised water reuse strategies using domestic wastewater can provide the best performance in the UWS with respect to water conservation, green house gas (GHG) emissions, and eutrophication indicators, while energy saving is almost negligible. On the other hand, centralised strategies can achieve the best performance for energy saving among the water reuse strategies. The results also show metabolism performance assessment in a complex system such as integrated UWS can reveal the magnitude of the interactions between the nexus elements (i.e. water, energy, and pollution). In addition, it can also reveal any unexpected influences of these elements that might exist between the UWS components and overall system.

Explaining the interactions between metaldehyde and acidic surface groups of activated carbon under different pH conditions.

Metaldehyde (MA) is an organic compound widely used in agriculture all around the world as molluscicide. There are growing concerns that relatively high levels of MA have been detected in surface water, which could be ascribed to the fact that it is transparent to common wastewater treatment processes. A theoretical study of the influence of activated carbon (AC) surface groups (SGs) on MA adsorption is done in order to help to understand the process and to evaluate the influence of the acid SGs over the adsorption in AC filters. Multiple Minima Hypersurface methodology was employed in order to study the interactions of the MA with acid SGs (hydroxyl and carboxyl) at acidic and neutral pH, and at different hydration conditions explicitly taking into account the solvent influence. Selected structures were re-optimized using Density Functional Theory and posteriorly refined to achieve a well-defined electron density to characterize the interactions by the Quantum Theory of Atoms in Molecules approach. The obtained results showed that the presence of SGs enhances the adsorption process. The deprotonated carboxyl and hydroxyl SGs of AC models show the strongest interactions, suggesting greater adsorption at neutral pH which is in concordance with experimental data. The main interactions are of a dispersive nature between the pesticide and the π-cloud of the AC and hydrogen bonds between the MA and the acid SGs suggesting that the adsorption process is driven by a physisorption mechanism. Water acts as an intermediary between the AC and MA and competing with it for the adsorption sites.

Occurrence of PPCPs in a Brazilian water reservoir and their removal efficiency by ecological filtration.

The presence of PPCPs (Pharmaceuticals and Personal Care Products) in water sources and drinking water has concerned researchers in recent times. This study was carried out to evaluate the occurrence of 6 PPCPs (namely paracetamol, diclofenac, naproxen, ibuprofen, benzophenone-3 and methylparaben) in the Lobo reservoir, their degradation products, and how efficiently they were removed by 22 ecological filters, considering individual and mixture of compounds. There were 3 spiking events of PPCPs (2 µg L-1) in the ecological filter influents conducted with a lag period of 15 days between spikes. Water samples were collected from the influent and effluent of the filters at 3, 6 and 24 h after each spiking event. All target PPCPs were identified in the Lobo reservoir water in the range of µg L-1. The personal care products were detected with 100% frequency in the samples, and in higher concentrations compared to the pharmaceuticals. Degradation products of diclofenac and benzophenone-3 were identified in the water samples. Results of this investigation show that ecological filtration was an effective process (70-99%) to remove 2 µg L-1 of the selected PPCPs, and demonstrated that the filters were resilient to individual compounds and to their mixtures.

Chemical and Mechanical Properties of Experimental Dental Composites as a Function of Formulation and Postcuring Thermal Treatment.

This study evaluated the influence of formulation and thermal treatment on the degree of conversion, fracture toughness, flexural strength, and elastic modulus of experimental composites. Six composites were analyzed at BisGMA : TEGDMA molar ratios of 1 : 1 and 7 : 3 with filler at 30, 50, and 70 wt%. The degree of conversion was analyzed by Fourier transform infrared spectroscopy, fracture toughness was measured using the single-edge notched beam, and flexural strength and elastic modulus were measured with the 3-point bend test. For all tests, one-half of the specimens received thermal treatment at 170°C for 10 min. Data were analyzed by the Kruskal-Wallis or ANOVA/Tukey's test (α = 5%). The 1 : 1 BisGMA : TEGDMA ratio showed higher properties than the 7 : 3 ratio. Although the material with 70% filler had a conversion lower than the one with 50%, it showed higher mechanical properties. The thermal treatment improved all properties in all materials. Therefore, the use of an equimolar ratio of BisGMA : TEGDMA can be paired with 70 wt% filler to design dental composites that possess increased advantageous physical and chemical properties. Furthermore, the simple and low-cost method of thermal treatment proposed for use in clinical dentistry has been shown to effectively improve the properties of all evaluated materials.

Degradation kinetics of organic matter in dairy industry wastewater by flotation/ozonation processes / Cinética de degradação da matéria orgânica nas águas residuárias da indústria de laticínios pelos processos de flotação/ozonização

This study evaluated the adjustment of four kinetic models and their respective parameters on data of dairy wastewater treatment by the physico-chemical process of flotation and ozonation. The experiment was implemented during the year 2014, with all the tests in triplicate. The treatments were carried out at different pH levels (3.6, 7.0 and 10.4), and flotation/ozonation was catalyzed by manganese (Mn2+) in neutral level (pH 7.0). Best removal efficiencies for chemical oxygen demand (COD) were obtained in acidic medium, with removals greater than 75% after 20 min of treatment. There was no significant difference with regards to addition of Mn2+ on COD removal by the physicochemical process. The kinetic models that best fit to the experimental data, for all treatments, were the asymptotic (residual) model and that of Chan and Chu. Treatment in acidic medium showed the highest values of the kinetic parameters for the adjusted model, obtaining a k coefficient equal to 0.2394 min-1 for the asymptotic model and kinetic coefficient 1/ of 0.4816 min-1 for the Chan and Chu model, both presenting a determination coefficient greater than 99%.

Neste estudo, avaliou-se o ajuste de quatro modelos cinéticos (modelo de escoamento pistonado, mistura completa, assintótico ou residual e de Chan e Chu e seus respectivos parâmetros, na degradação da matéria orgânica presente no efluente de laticínios pelo processo físico-químico de flotação e ozonização. O experimento foi implementado durante o ano de 2014, com todos os testes em triplicata, os s tratamentos foram realizados sob diferentes pHs (3,6; 7,0 e 10,4), além da flotação/ozonização catalisada pelo manganês (Mn2+) em meio neutro. Observando que em meio ácido ocorreram as melhores eficiências de remoção da demanda química de oxigênio (DQO), tendo sido obtida uma remoção superior a 75% em 20 min de tratamento. Não houve diferença significativa em relação à adição de Mn2+ ao processo físico-químico. Os modelos que mais se ajustaram aos dados experimentais, para todos os tratamentos realizados, foram o modelo assintótico e o de Chan e Chu. O tratamento em meio ácido foi o que apresentou os maiores valores dos parâmetros cinéticos para os modelos ajustados, obtendo-se para o modelo assintótico, coeficiente k igual a 0,2394 min-1, e para o modelo de Chan e Chu, coeficiente cinético 1/ de 0,4816 min-1, apresentando para ambos os modelos um coeficiente de determinação superior a 99%.

A comparative study of bulk-fill composites: degree of conversion, post-gel shrinkage and cytotoxicity.

Bulk-fill composites are claimed to be restorative materials used in deep preparations and effectively photoactivated in layers up to 4 mm. The aim of the present study was to evaluate the degree of conversion, post-gel volumetric shrinkage, and cytotoxicity of six bulk-fill and two conventional composites. Degree of conversion was determined by FTIR spectroscopy; post-gel volumetric shrinkage was determined using the strain gauge method; and cytotoxicity in human fibroblasts was evaluated indirectly by the MTT assay. Data were subjected to one-way ANOVA/Tukey's test (α = 0.05). All materials, including bulk-fill and conventional composites, were classified as non-toxic, with cell viability higher than 70%. Bulk-fill composites exhibited volumetric shrinkage similar to or lower (1.4 to 0.4%) than that of conventional composites (1.7-2.1%). However, only four of the bulk-fill composites were able to sustain a homogeneous conversion at the 4-mm depth. Despite their non-toxicity and shrinkage similar to that of conventional materials, not all commercial bulk-fill materials were able to maintain a conversion as high as 80% of the superficial layer, at the 4-mm depth, indicating some failure in the bulk-fill design of some commercial brands. Therefore, the use of bulk-fill materials in dental practice is advantageous, but special attention should be given to the selection and correct use of the materials.

A comparative study of bulk-fill composites: degree of conversion, post-gel shrinkage and cytotoxicity

Abstract: Bulk-fill composites are claimed to be restorative materials used in deep preparations and effectively photoactivated in layers up to 4 mm. The aim of the present study was to evaluate the degree of conversion, post-gel volumetric shrinkage, and cytotoxicity of six bulk-fill and two conventional composites. Degree of conversion was determined by FTIR spectroscopy; post-gel volumetric shrinkage was determined using the strain gauge method; and cytotoxicity in human fibroblasts was evaluated indirectly by the MTT assay. Data were subjected to one-way ANOVA/Tukey's test (α = 0.05). All materials, including bulk-fill and conventional composites, were classified as non-toxic, with cell viability higher than 70%. Bulk-fill composites exhibited volumetric shrinkage similar to or lower (1.4 to 0.4%) than that of conventional composites (1.7-2.1%). However, only four of the bulk-fill composites were able to sustain a homogeneous conversion at the 4-mm depth. Despite their non-toxicity and shrinkage similar to that of conventional materials, not all commercial bulk-fill materials were able to maintain a conversion as high as 80% of the superficial layer, at the 4-mm depth, indicating some failure in the bulk-fill design of some commercial brands. Therefore, the use of bulk-fill materials in dental practice is advantageous, but special attention should be given to the selection and correct use of the materials.

Influence of PPCPs on the performance of intermittently operated slow sand filters for household water purification.

Removal of pharmaceuticals and personal care products (PPCPs) from drinking water is usually enhanced by advanced oxidation which is not affordable in low income countries. Slow sand filtration has been found to be capable of removing anti-inflammatory compounds, and its low maintenance costs and easy operation make it an attractive technology for treating drinking water in many parts of the world. In addition, slow sand filters can be used at both large and household scales. The biofilm (i.e. schmutzdecke) developed on the top of the sand and within the upper layers of the sand is acknowledged to be responsible for the water purification. However, it is possible that the PPCPs may affect the schmutzdecke development and microbial community within the filters, and consequently the performance of the filter. This study investigated two household slow sand filters (for water purification) operated intermittently with and without contamination by six PPCPs. Eleven parameters were monitored in the affluent and effluent water, including bacterial species present and schmutzdecke biomass development. Results demonstrated that the household slow sand filter performance was not affected by the 2µgL-1 of PPCPs in the water. There was no significant difference between filters for total coliforms and E. coli removal, but there was considerable difference between sampling times. Biomass considerably increased with the number of filtrations in both filters and there was no significant difference between filter biomass. However, it was found that more bacterial species were present in the period with no contamination than during the contamination period. Bacillus anthracis and Exiguobacterium sp. showed to be resistant to the effects of the PPCPs. These suggest there are effects of PPCPs on bacterial species within the filter. However, the effect of the PPCPs on biomass was not conclusive in this study and needs to be further investigated.

Estudo da descoloração do corante FD&C azul no 2 Indigotina pelo tratamento combinado do fungo Trametes versicolor e processo de filtração lenta / Study of decolorization of FD&C blue # 2 indigotine by fungus Trametes versicolor combined with slow sand filtration

O uso de fungos na descoloração de corantes com métodos economicamente viáveis de produção de água bacteriologicamente segura há muito vem sendo descrito por diversos autores. Este trabalho teve por objetivo investigar a eficiência da remoção de corante artificial FD&C azul no 2 Indigotina, com uso do fungo de degradação branca Trametes versicolor em combinação com a filtração lenta. Para a realização dos trabalhos, foram instalados dois protótipos de filtros lentos denominados FL-A e FL-B - no sobrenadante do filtro FL-A foi inoculado o referido fungo, e o filtro FL-B foi utilizado como controle (sem inoculação do microrganismo). O melhor percentual de remoção do corante pelo fungo Trametes versicolor em combinação com a filtração lenta foi de 44,74% 24 horas após a atividade máxima registrada de lacase. Os resultados mostraram que a filtração lenta combinada com o tratamento com o fungo T. versicolor não apresenta grande potencial para remoção de cor em 21 dias de tratamento, visto que os produtos microbianos gerados interferem no processo de filtração, diminuindo a eficiência do processo físico. Entretanto, restringindo o tempo de tratamento a 24 horas após a atividade enzimática máxima, o tratamento combinado apresentou boa eficiência.

The use of fungi in the decolorization of dyes with economically viable methods of producing bacteriologically safe water has long been described by several authors. This study aimed to investigate the removal efficiency of artificial coloring FD&C Blue no 2 Indigo, using the degradation white fungus Trametes versicolor in combination with slow sand filtration. Two prototype filters slowly termed FL-A and FL-B were installed - the supernatant water of filter FL-A was inoculated with the fungus, while filter FL-B was used as control. The best percentage of dye removal by the fungus Trametes versicolor in combination with the slow sand filtration was 44.74% achieved 24 hours after the maximum laccase activity. The results show that the combination of the fungus T. versicolor with slow sand filtration treatment presents no great potential for color removal at 21 days of treatment, whereas microbial products generated interfere with the filtration process, lowering the efficiency of the physical process. However, with the restriction of the handling time into 24 hours after the maximum enzymatic activity, combined treatment showed good efficiency.

Malignant transformation in melanocytes is associated with increased production of procoagulant microvesicles.

Shedding of microvesicles (MVs) by cancer cells is implicated in a variety of biological effects, including the establishment of cancer-associated hypercoagulable states. However, the mechanisms underlying malignant transformation and the acquisition of procoagulant properties by tumour-derived MVs are poorly understood. Here we investigated the procoagulant and prothrombotic properties of MVs produced by a melanocyte-derived cell line (melan-a) as compared to its tumourigenic melanoma counterpart Tm1. Tumour cells exhibit a two-fold higher rate of MVs production as compared to melan-a. Melanoma MVs display greater procoagulant activity and elevated levels of the clotting initiator protein tissue factor (TF). On the other hand, tumour- and melanocyte-derived MVs expose similar levels of the procoagulant lipid phosphatidylserine, displaying identical abilities to support thrombin generation by the prothrombinase complex. By using an arterial thrombosis model, we observed that melanoma- but not melanocyte-derived MVs strongly accelerate thrombus formation in a TF-dependent manner, and accumulate at the site of vascular injury. Analysis of plasma obtained from melanoma-bearing mice showed the presence of MVs with a similar procoagulant pattern as compared to Tm1 MVs produced in vitro. Remarkably, flow-cytometric analysis demonstrated that 60% of ex vivo MVs are TF-positive and carry the melanoma-associated antigen, demonstrating its tumour origin. Altogether our data suggest that malignant transformation in melanocytes increases the production of procoagulant MVs, which may contribute for a variety of coagulation-related protumoural responses.