RESUMO
Programmed DNA structures and assemblies are readily accessible, but site-specific functionalization is critical to realize applications in various fields such as nanoelectronics, nanomaterials and biomedicine. Besides pre- and post-DNA synthesis conjugation strategies, on-solid support reactions offer advantages in certain circumstances. We describe on-solid support internucleotide coupling reactions, often considered undesirable, and a workaround strategy to overcome them. Palladium coupling reactions enabled on-solid support intra- and interstrand coupling between single-stranded DNAs (ss-DNAs). Dilution with a capping agent suppressed interstrand coupling, maximizing intrastrand coupling. Alternatively, interstrand coupling actually proved advantageous to provide dimeric organic/DNA conjugates that could be conveniently separated from higher oligomers, and was more favorable with longer terphenyl coupling partners.
RESUMO
Metal-mediated DNA (mmDNA) presents a pathway toward engineering bioinorganic and electronic behavior into DNA devices. Many chemical and biophysical forces drive the programmable chelation of metals between pyrimidine base pairs. Here, we developed a crystallographic method using the three-dimensional (3D) DNA tensegrity triangle motif to capture single- and multi-metal binding modes across granular changes to environmental pH using anomalous scattering. Leveraging this programmable crystal, we determined 28 biomolecular structures to capture mmDNA reactions. We found that silver(I) binds with increasing occupancy in T-T and U-U pairs at elevated pH levels, and we exploited this to capture silver(I) and mercury(II) within the same base pair and to isolate the titration points for homo- and heterometal base pair modes. We additionally determined the structure of a C-C pair with both silver(I) and mercury(II). Finally, we extend our paradigm to capture cadmium(II) in T-T pairs together with mercury(II) at high pH. The precision self-assembly of heterobimetallic DNA chemistry at the sub-nanometer scale will enable atomistic design frameworks for more elaborate mmDNA-based nanodevices and nanotechnologies.
Assuntos
Mercúrio , Prata , Pareamento de Bases , Prata/química , DNA/química , Mercúrio/químicaRESUMO
DNA double helices containing metal-mediated DNA (mmDNA) base pairs are constructed from Ag+ and Hg2+ ions between pyrimidine:pyrimidine pairs with the promise of nanoelectronics. Rational design of mmDNA nanomaterials is impractical without a complete lexical and structural description. Here, the programmability of structural DNA nanotechnology toward its founding mission of self-assembling a diffraction platform for biomolecular structure determination is explored. The tensegrity triangle is employed to build a comprehensive structural library of mmDNA pairs via X-ray diffraction and generalized design rules for mmDNA construction are elucidated. Two binding modes are uncovered: N3-dominant, centrosymmetric pairs and major groove binders driven by 5-position ring modifications. Energy gap calculations show additional levels in the lowest unoccupied molecular orbitals (LUMO) of mmDNA structures, rendering them attractive molecular electronic candidates.
Assuntos
DNA , Metais , Metais/química , DNA/química , Pareamento de Bases , Pirimidinas/química , Nanotecnologia , Conformação de Ácido NucleicoRESUMO
DNA double helices containing metal-mediated DNA (mmDNA) base pairs have been constructed from Ag+ and Hg2+ ions between pyrimidine:pyrimidine pairs with the promise of nanoelectronics. Rational design of mmDNA nanomaterials has been impractical without a complete lexical and structural description. Here, we explore the programmability of structural DNA nanotechnology toward its founding mission of self-assembling a diffraction platform for biomolecular structure determination. We employed the tensegrity triangle to build a comprehensive structural library of mmDNA pairs via X-ray diffraction and elucidated generalized design rules for mmDNA construction. We uncovered two binding modes: N3-dominant, centrosymmetric pairs and major groove binders driven by 5-position ring modifications. Energy gap calculations showed additional levels in the lowest unoccupied molecular orbitals (LUMO) of mmDNA structures, rendering them attractive molecular electronic candidates. This article is protected by copyright. All rights reserved.
RESUMO
The rational design of nanoscopic DNA tiles has yielded highly ordered crystalline matter in 2D and 3D. The most well-studied 3D tile is the DNA tensegrity triangle, which is known to self-assemble into macroscopic crystals. However, contemporary rational design parameters for 3D DNA crystals nearly universally invoke integer numbers of DNA helical turns and Watson-Crick (WC) base pairs. In this study, 24-bp edges are substituted into a previously 21-bp (two helical turns of DNA) tensegrity triangle motif to explore whether such unconventional motif can self-assemble into 3D crystals. The use of noncanonical base pairs in the sticky ends results in a cubic arrangement of tensegrity triangles with exceedingly high symmetry, assembling a lattice from winding helical axes and diamond-like tessellation patterns. Reverting this motif to sticky ends with Watson-Crick pairs results in a trigonal hexagonal arrangement, replicating this diamond arrangement in a hexagonal context. These results showcase that the authors can generate unexpected, highly complex, pathways for materials design by testing modifications to 3D tiles without prior knowledge of the ensuing symmetry. This study expands the rational design toolbox for DNA nanotechnology; and it further illustrates the existence of yet-unexplored arrangements of crystalline soft matter.
Assuntos
DNA , Nanotecnologia , Conformação de Ácido Nucleico , DNA/química , Pareamento de BasesRESUMO
In this perspective, we provide a summary of recent developments in self-assembling three-dimensional (3D) DNA crystals. Starting from the inception of this subfield, we describe the various advancements in structure that have led to an increase in the diversity of macromolecular crystal motifs formed through self-assembly, and we further comment on the future directions of the field, which exploit noncanonical base pairing interactions beyond Watson-Crick. We then survey the current applications of self-assembling 3D DNA crystals in reversibly active nanodevices and materials engineering and provide an outlook on the direction researchers are taking these structures. Finally, we compare 3D DNA crystals with DNA origami and suggest how these distinct subfields might work together to enhance biomolecule structure solution, nanotechnological motifs, and their applications.
Assuntos
DNA , Nanotecnologia , Conformação de Ácido Nucleico , DNA/química , Pareamento de BasesRESUMO
Nuclear spin singlet states are often found to allow long-lived storage of nuclear magnetization, which can form the basis of novel applications in spectroscopy, imaging, and in studies of dynamic processes. Precisely how long such polarization remains intact, and which factors affect its lifetime is often difficult to determine and predict. We present a combined experimental/computational study to demonstrate that molecular dynamics simulations and ab initio calculations can be used to fully account for the experimentally observed proton singlet lifetimes in ethyl-d5-propyl-d7-maleate in deuterated chloroform as solvent. The correspondence between experiment and simulations is achieved without adjustable parameters. These studies highlight the importance of considering unusual and difficult-to-control mechanisms, such as dipolar couplings to low-gamma solvent nuclei, and to residual paramagnetic species, which often can represent lifetime limiting factors. These results also point to the power of molecular dynamics simulations to provide insights into little-known NMR relaxation mechanisms.
RESUMO
A chiral dimer of an organic semiconductor was assembled from octaniline (octamer of polyaniline) conjugated to DNA. Facile reconfiguration between the monomer and dimer of octaniline-DNA was achieved. The geometry of the dimer and the exciton coupling between octaniline molecules in the assembly was studied both experimentally and theoretically. The octaniline dimer was readily switched between different electronic states by protonic doping and exhibited a Davydov splitting comparable to those previously reported for DNA-dye systems employing dyes with strong transition dipoles. This approach provides a possible platform for studying the fundamental properties of organic semiconductors with DNA-templated assemblies, which serve as candidates for artificial light-harvesting systems and excitonic devices.
Assuntos
Corantes , DNA , SemicondutoresRESUMO
A quasi-one-dimensional organic semiconductor, hepta(p-phenylene vinylene) (HPV), was incorporated into a DNA tensegrity triangle motif using a covalent strategy. 3D arrays were self-assembled from an HPV-DNA pseudo-rhombohedron edge by rational design and characterized by X-ray diffraction. Templated by the DNA motif, HPV molecules exist as single-molecule fluorescence emitters at the concentration of 8â mM within the crystal lattice. The anisotropic fluorescence emission from HPV-DNA crystals indicates HPV molecules are well aligned in the macroscopic 3D DNA lattices. Sophisticated nanodevices and functional materials constructed from DNA can be developed from this strategy by addressing functional components with molecular accuracy.
RESUMO
Peroxynitrite, a transient reactive oxygen species (ROS), is believed to play a deleterious role in physiological processes. Herein, we report a two-photon ratiometric fluorescent probe that selectively reacts with peroxynitrite yielding a >200-fold change upon reaction. The probe effectively visualized fluctuations in peroxynitrite generation by arginase 1 in vivo and in vitro. This provides evidence that arginase 1 is a critical regulator of peroxynitrite.
Assuntos
Corantes Fluorescentes , Ácido Peroxinitroso , Arginase , Fótons , Espécies Reativas de OxigênioRESUMO
BACKGROUND: Platelets are increasingly recognized as immune cells. As such, they are commonly seen to induce and perpetuate inflammation; however, anti-inflammatory activities are increasingly attributed to them. Atherosclerosis is a chronic inflammatory condition. Similar to other inflammatory conditions, the resolution of atherosclerosis requires a shift in macrophages to an M2 phenotype, enhancing their efferocytosis and cholesterol efflux capabilities. OBJECTIVES: To assess the effect of platelets on macrophage phenotype. METHODS: In several in vitro models employing murine (RAW264.7 and bone marrow-derived macrophages) and human (THP-1 and monocyte-derived macrophages) cells, we exposed macrophages to media in which non-agonized human platelets were cultured for 60 minutes (platelet-conditioned media [PCM]) and assessed the impact on macrophage phenotype and function. RESULTS: Across models, we demonstrated that PCM from healthy humans induced a pro-resolving phenotype in macrophages. This was independent of signal transducer and activator of transcription 6 (STAT6), the prototypical pathway for M2 macrophage polarization. Stimulation of the EP4 receptor on macrophages by prostaglandin E2 present in PCM, is at least partially responsible for altered gene expression and associated function of the macrophages-specifically reduced peroxynitrite production, increased efferocytosis and cholesterol efflux capacity, and increased production of pro-resolving lipid mediators (ie, 15R-LXA4 ). CONCLUSIONS: Platelet-conditioned media induces an anti-inflammatory, pro-resolving phenotype in macrophages. Our findings suggest that therapies targeting hemostatic properties of platelets, while not influencing pro-resolving, immune-related activities, could be beneficial for the treatment of atherothrombotic disease.
Assuntos
Plaquetas , Macrófagos , Animais , Anti-Inflamatórios , Meios de Cultivo Condicionados , Humanos , Camundongos , FenótipoRESUMO
Single-wall carbon nanotubes (SWCNTs) are known to embody many desirable features for nanoelectronic and photonic applications, including excellent electronic and optical properties and mechanical robustness. To utilize these species in a bottom-up nanotechnological approach, it is necessary to be able to place them in precise absolute positions within a larger framework, without disturbing the conduction surface. Although it is well-known how to orient one or two nanotubes on a DNA origami, precise placement has eluded investigators previously. Here, we report a method of attaching a strand of DNA on the reactive end of a SWCNT, and then of using that DNA strand to place the nanotube at a specific site on a 2D DNA origami raft. We demonstrate that it is possible to place one or two nanotubes on such a DNA origami raft.
Assuntos
DNA/química , Nanotecnologia , Nanotubos de Carbono/químicaRESUMO
The examination and optimized preparation of nuclear spin singlet order has enabled the development of new types of applications that rely on potentially long-term polarization storage. Lifetimes several orders of magnitude longer than T1 have been observed. The efficient creation of such states relies on special pulse sequences. The extreme cases of very large and very small magnetic equivalence received primary attention, while relatively little effort has been directed towards studying singlet relaxation in the intermediate regime. The intermediate case is of interest as it is relevant for many spin systems, and would also apply to heteronuclear systems in very low magnetic fields. Experimental evidence for singlet-triplet leakage in the intermediate regime is sparse. Here we describe a pulse sequence for efficiently creating singlets in the intermediate regime in a broad-band fashion. Singlet lifetimes are studied with a specially synthesized molecule over a wide range of magnetic fields using a home-built sample-lift apparatus. The experimental results are supplemented with spin simulations using parameters obtained from ab initio calculations. This work indicates that the chemical shift anisotropy (CSA) mechanism is relatively weak compared to singlet-triplet leakage for the proton system observed over a large magnetic field range. These experiments provide a mechanism for expanding the scope of singlet NMR to a larger class of molecules, and provide new insights into singlet lifetime limiting factors.
RESUMO
An electro-optical modulator was constructed using a DNA nanostructure scaffold with oligomers of poly(phenylenevinylene) and polyaniline. A molecular device containing one each of the functional molecules was assembled in a DNA origami. The constructs formed an "X" shape and were visualized by atomic force microscopy. In response to redox reconfiguration, the device reversibly altered fluorescence signal output. This molecular self-assembly strategy provides opportunities to make unique material composites that are difficult to achieve by blending. The strategy offers a "plug and play" format that may lead to many new functions.
Assuntos
Compostos de Anilina/química , DNA/química , Nanoestruturas/química , Polivinil/química , Semicondutores , Condutividade Elétrica , Desenho de Equipamento , Nanoestruturas/ultraestrutura , Dispositivos ÓpticosRESUMO
A 3D array of organic semiconductors was assembled using a DNA scaffold. An octameric aniline molecule ("octaniline") was incorporated into a DNA building block based on a dimeric tensegrity triangle. The construct self-assembled to form a 3D crystal. Reversible redox conversion between the pernigraniline and leucoemeraldine states of the octaniline is retained in the crystal. Protonic doping gave emeraldine salt at pHâ 5, corresponding to the conductive form of polyaniline. Redox cycling within the crystal was visualized by color changes and Raman microscopy. The ease of conversion between the octaniline states suggests that it is a viable electronic switch within a unique 3D structure.
RESUMO
The synthesis of a hyperpolarized molecule was developed, where the polarization and the singlet state were preserved over two controlled chemical steps. Nuclear singlet-state lifetimes close to 6â min for protons are reported in dimethyl fumarate. Owing to the high symmetry (AA'X3 X3 ' and A2 systems), the singlet-state readout requires either a chemical desymmetrization or a long and repeated spin lock. Using DFT calculations and relaxation models, we further determine nuclear spin singlet lifetime limiting factors, which include the intramolecular dipolar coupling mechanism (proton-proton and proton-deuterium), the chemical shift anisotropy mechanism (symmetric and antisymmetric), and the intermolecular dipolar coupling mechanism (to oxygen and deuterium). If the limit of paramagnetic relaxation caused by residual oxygen could be lifted, the intramolecular dipolar coupling to deuterium would become the limiting relaxation mechanism and proton lifetimes upwards of 26â min could become available in the molecules considered here (dimethyl maleate and dimethyl fumarate).
RESUMO
PX-DNA is a four-stranded DNA structure that has been implicated in the recognition of homology, either continuously, or in an every-other-half-turn fashion. Some of the structural features of the molecule have been noted previously, but the structure requires further characterization. Here, we report atomic force microscopic characterization of PX molecules that contain periodically placed biotin groups, enabling the molecule to be labeled by streptavidin molecules at these sites. In comparison with conventional double stranded DNA and with antiparallel DNA double crossover molecules, it is clear that PX-DNA is a more dynamic structure. Furthermore, the spacing between the nucleotide pairs along the helix axis is shorter, suggesting a mixed B/A structure. Circular dichroism spectroscopy indicates unusual features in the PX molecule that are absent in both the molecules to which it is compared.
Assuntos
DNA/química , Dicroísmo Circular , DNA/ultraestrutura , DNA de Forma B/química , Microscopia de Força Atômica , Modelos Moleculares , Conformação de Ácido NucleicoRESUMO
A ligand capable of adopting two pseudo-enantiomeric helically chiral states when bound to copper has been applied as an asymmetric catalyst in the Michael addition of malonate substrates to nitrostyrenes. The absolute configuration of the helically chiral ligand is inverted upon oxidation/reduction of the copper center. In this way, the handedness of the Michael addition product (R/S) can be selected based on the handedness of the catalyst (Λ/Δ). Exciton coupled circular dichroism (ECCD) was used to identify which of the two pseudo-enantiomeric forms the catalyst adopted after reduction/oxidation, with additional support from X-ray crystallographic data. The synthesis of the ligand was achieved in five steps with an overall 61% yield. Enantiomeric excesses of the Michael addition products of up to 72% (S) and 70% (R) were obtained in acetonitrile. The ability to choose the handedness of the product based on the chiral state of the catalyst has been demonstrated with several different solvents, bases, nitrostyrene/malonate substrates, and prochiral malonate substrates. A combination of molecular modelling, crystal structure and kinetic data suggest that one urea moiety of the catalyst ligand likely binds the nitrostyrene substrate while blocking the Re face of the nitrostyrene in the transition state.
RESUMO
We describe two DNA-templated ligation strategies: native chemical ligation (NCL), and thiol-disulfide exchange. Both systems result in successful ligation in the presence of a DNA template. The stability of the product from the NCL reaction relies on exogenous thiol, while the thiol-disulfide reaction proceeds in a catalyst-free manner.