Characterization and Programming Algorithm of Phase Change Memory Cells for Analog In-Memory Computing.

In this paper, a thorough characterization of phase-change memory (PCM) cells was carried out, aimed at evaluating and optimizing their performance as enabling devices for analog in-memory computing (AIMC) applications. Exploiting the features of programming pulses, we discuss strategies to reduce undesired phenomena that afflict PCM cells and are particularly harmful in analog computations, such as low-frequency noise, time drift, and cell-to-cell variability of the conductance. The test vehicle is an embedded PCM (ePCM) provided by STMicroelectronics and designed in 90-nm smart power BCD technology with a Ge-rich Ge-Sb-Te (GST) alloy for automotive applications. On the basis of the results of the characterization of a large number of cells, we propose an iterative algorithm to allow multi-level cell conductance programming, and its performances for AIMC applications are discussed. Results for a group of 512 cells programmed with four different conductance levels are presented, showing an initial conductance spread under 6%, relative current noise less than 9% in most cases, and a relative conductance drift of 15% in the worst case after 14 h from the application of the programming sequence.

A Long-Distance RF-Powered Sensor Node with Adaptive Power Management for IoT Applications.

We present a self-sustained battery-less multi-sensor platform with RF harvesting capability down to -17 dBm and implementing a standard DASH7 wireless communication interface. The node operates at distances up to 17 m from a 2 W UHF carrier. RF power transfer allows operation when common energy scavenging sources (e.g., sun, heat, etc.) are not available, while the DASH7 communication protocol makes it fully compatible with a standard IoT infrastructure. An optimized energy-harvesting module has been designed, including a rectifying antenna (rectenna) and an integrated nano-power DC/DC converter performing maximum-power-point-tracking (MPPT). A nonlinear/electromagnetic co-design procedure is adopted to design the rectenna, which is optimized to operate at ultra-low power levels. An ultra-low power microcontroller controls on-board sensors and wireless protocol, to adapt the power consumption to the available detected power by changing wake-up policies. As a result, adaptive behavior can be observed in the designed platform, to the extent that the transmission data rate is dynamically determined by RF power. Among the novel features of the system, we highlight the use of nano-power energy harvesting, the implementation of specific hardware/software wake-up policies, optimized algorithms for best sampling rate implementation, and adaptive behavior by the node based on the power received.