Biosafety assessments of hexafluoropropylene trimer derivative as a fluorinated cooling fluid for electronics.

The Internet Data Center (IDC) is one of the most important infrastructures in the field of information technology. The cooling system for heat dissipation of IDC is indispensable due to it generates a large amount of heat during its calculation process, which may potentially harm its normal operation. Electronic fluorinated fluids have been widely used in cooling systems of IDC with stable physical and chemical properties. However, the biological toxicity of electronic fluorinated fluids has not been fully evaluated and there is a lack of unified safety standards, which may pose potential risks to the environment and human health. Here, hexafluoropropylene terpolymer (HFPT) as an example has been systematically studied, fully considering the application scenarios of data centers. Also, the emergency effects of fluorinated coolants in mammalian models from the perspectives of inhalation, skin contact, accidental entry into eyes, accidental ingestion, and chronic toxicity, are evaluated. Multiple in vivo experiments have proven that HFPT not only has stable physical and chemical properties, that can maintain the safe operation of IDC, but also has low physiological toxicity to mammals and can provide health benefits to data center staff and the assurance of surrounding environment. This study proves the good biological safety of electronic fluorinated fluids and provides a reference for environmental assessment and risk management of liquid cooling technology in IDC. Supplementary Information: The online version contains supplementary material available at 10.1007/s43188-024-00234-3.

Recent progress of nano-drugs in neutron capture therapy.

As a developing radiation treatment for tumors, neutron capture therapy (NCT) has less side effects and a higher efficacy than conventional radiation therapy. Drugs with specific isotopes are indispensable counterparts of NCT, as they are the indespensable part of the neutron capture reaction. Since the creation of the first and second generations of boron-containing reagents, NCT has significantly advanced. Notwithstanding, the extant NCT medications, predominantly comprised of small molecule boron medicines, have encountered challenges such monofunctionality, inadequate targeting of tumors, and hypermetabolism. There is an urgent need to promote the research and development of new types of NCT drugs. Bio-nanomaterials can be introduced into the realm of NCT, and nanotechnology can give conventional medications richer functionality and significant adaptability. This can complement the advantages of each other and is expected to develop more new drugs with less toxicity, low side effects, better tumor targeting, and high biocompatibility. In this review, we summarized the research progress of nano-drugs in NCT based on the different types and sources of isotopes used, and introduced the attempts and efforts made by relevant researchers in combining nanomaterials with NCT, hoping to provide pivotal references for promoting the development of the field of tumor radiotherapy.

Study on the process of harmless treatment of residual electrolyte in battery disassembly.

Residual electrolyte is the main pollution source in the lithium ion battery disassembly process. A practical detoxified approach is studied using the lithium hexafluorophosphate in the decommissioned power battery with dimethyl carbonate as a solvent. The pH measurement, Fourier transform infrared spectroscopy, micromorphology and phase structure characterization techniques showed that the process in this study is capable of removing lithium hexafluorophosphate from decommissioned power batteries, while controlling the proper ratio of NaOH can also completely precipitate F- into CaF2 crystal and allows recycling of the organic solvents. This process scheme of residual electrolyte treatment effectively reduces environmental pollution during the decommissioned power batteries recycling process, and has the benefit of resource reuse for valuable elements.

Polypyrrole Encapsulated Nickel Nanorods for Conductivity Improvement by Magnetic Alignment.

Polypyrrole encapsulated nickel nanorods (PPy@Ni) have been prepared by electro-polymerization using Ni nanorods as template. PPy@Ni were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectrometer, Fourier transform infrared (FTIR) spectra and vibrating sample magnetometry (VSM). The maximum saturation magnetization of PPy@Ni was up to 44.6 emu g-1. Further, PPy@Ni was used as the additive for the conductivity improvement in polymer matrix. Experimental results showed that the electric conductivity reached 1.8×10-3 S m-1 when 5% PPy@Ni was added in the poly(urethane acrylate) matrix by applying a magnetic field. Further tests showed that when the additive concentration increased from 0.1% to 5%, the correspondence saturation magnetization increased from 15.1 emug-1 to 31.3 emug-1. This work provides new light on controllable fabrication of conducting polymer by adding magnetic alignment conductive additives.

Improving the cyclability and capacity of Li-O2 batteries via low rate pre-activation.

Simple low rate pre-activation effectively prolonged the cycle life of Li-O2 batteries with MWNT cathodes in a 1 M LiClO4/DMSO electrolyte from 55 to 290 cycles, and the ultimate capacity and rate performance were also significantly enhanced, attributed to reconstructed homogeneous and compact SEI layers on the Li anodes by pre-activation.

High quantum yield and well-dispersed quantum dots luminescent composite through sodium carboxymethyl starch.

It is a challenging task to prepare well-dispersed and highly luminescent quantum dots (QDs) powder and a new strategy is reported in this article. Sodium carboxymethyl starch (CMS-Na) was employed in this work to prepare the QDs-starch composite. Ultraviolet (UV) light shows that the blank starches had no fluorescence, while the QDs-starches were highly luminescent. Scanning electron microscopy (SEM) observation shows that the QDs-starch composite has the typical particle morphology with the diameter around 200 nm. Energy dispersive X-ray spectroscopy (EDX) results show that there are intensive tellurium (Te) and cadmium (Cd) element signals. Combined fluorescent lifetime and steady-state spectrometer show that the QDs-starch quantum yields (QYs) increase when the QDs loading increases from 1 × 10-6 mol/g to 2 × 10-6 mol/g, but when the loadings further increase, the QYs decrease slightly. For the red colour (λem  = 660 nm) QDs, the QYs can reach to as high as 28.2%, and for the other colour QDs they can also have the QYs above 22%. Time-resolved photobleaching experiments show that the fluorescent QDs-starch composite has a half-decay time of 40.23 s. These results indicate that the CMS-Na is a promising QDs dispersant to obtain high QY QD composites.

In-Situ Template Formation Strategy for the Preparation of Nitrogen Doped Carbon Nanocage with Graphitic Shell as Electrode Material for Supercapacitor.

Nitrogen doped carbon nanocage with graphitic shell (NGCS) was fabricated through in-situ solid reaction between calcium acetate and dicyandiamide in an inert atmosphere followed by acid etching. The role played by the calcium acetate (Ca(Ac)2) and dicyandiamide (DCD) during the synthesis process is one-stone-two-birds. Calcium acetate plays multiple functions: template agent, graphitization catalyst, and carbon source. Dicyandiamide can be considered as the nitrogen sources and the chemical reaction agent that can be reacted with calcium acetate to form it into CaCN2. The NGCS obtained at 800 °C has a specific surface area of 420 m2/g and nitrogen content of 8.87 at%. The excellent electrochemical performance can be attributed to the combination effects of porous structure, nitrogen doping and graphitized nanocage shell of NGCS electrode. The hollow structure serves as the reservoir for fast electrolyte ion supplement. Nitrogen groups not only improve the wettability of interfaces between carbon surface and electrolyte, but also generate extra pseudocapacitance through redox reaction. The graphitic carbon nanocage shell can enhance the conductivity and facilitates the fast charge transfer. At a current density of 0.5 A/g, the specific capacitance of the NGCS-800 electrode is 215 F/g. Furthermore, the NGCS-800 electrode exhibits excellent rate capability (80% capacitance retention at 10 A/g) and outstanding cycling stability (96.89% capacitance retention after 5000 cycles). These intriguing results demonstrate that nitrogen doped carbon with graphitic shell will be highly promising as electrode materials for supercapacitors and other energy storage and conversation applications.

A multifunctional targeting probe with dual-mode imaging and photothermal therapy used in vivo.

BACKGROUND: Ag2S has the characteristics of conventional quantum dot such as broad excitation spectrum, narrow emission spectrum, long fluorescence lifetime, strong anti-bleaching ability, and other optical properties. Moreover, since its fluorescence emission is located in the NIR-II region, has stronger penetrating ability for tissue. Ag2S quantum dot has strong absorption during the visible and NIR regions, it has good photothermal and photoacoustic response under certain wavelength excitation. RESULTS: 200 nm aqueous probe Ag2S@DSPE-PEG2000-FA (Ag2S@DP-FA) with good dispersibility and stability was prepared by coating hydrophobic Ag2S with the mixture of folic acid (FA) modified DSPE-PEG2000 (DP) and other polymers, it was found the probe had good fluorescent, photoacoustic and photothermal responses, and a low cell cytotoxicity at 50 µg/mL Ag concentration. Blood biochemical analysis, liver enzyme and tissue histopathological test showed that no significant influence was observed on blood and organs within 15 days after injection of the probe. In vivo and in vitro fluorescence and photoacoustic imaging of the probe further demonstrated that the Ag2S@DP-FA probe had good active targeting ability for tumor. In vivo and in vitro photothermal therapy experiments confirmed that the probe also had good ability of killing tumor by photothermal. CONCLUSIONS: Ag2S@DP-FA was a safe, integrated diagnosis and treatment probe with multi-mode imaging, photothermal therapy and active targeting ability, which had a great application prospect in the early diagnosis and treatment of tumor.

Nitrogen-doped graphene quantum dot for direct fluorescence detection of Al3+ in aqueous media and living cells.

Graphene quantum dot (GQD) has been attractive in analytical science field due to its low toxicity, stable photoluminescence. Herein, nitrogen-doped GQD (N-GQD) was prepared by a facile solvothermal treatment of GO using dimethylformamide, and exhibited a green emission with 23.1% quantum yield. The N-GQD probe showed a selective and sensitive fluorescence enhancement response to Al3+, the mechanism might be the formation of a complex between Al3+ and N-GQD constrained the photo-induced electron transfer (PET) process of N-GQD itself. With Benesi-Hildebrand equation, the binding constant and molar ratio between N-GQD and Al3+ was calculated to be 4.6 × 104Lmol-1 and 1:1 respectively. The pKa value of N-GQD was also determined to be 4.4 by capillary electrophoresis. In pH 4.0 PBS solution, there was a good linear relation between the fluorescence intensity and the logarithm of concentration of Al3+ in the range of 2.5-75µmolL-1, the limit of detection (3σ) was 1.3µmolL-1. This "Off - On" fluorescence method had been applied to accurate quantification of aluminum in hydrotalcite tablets. What's more, the fluorescence switch property of N-GQD was explored by alternate addition of Al3+ and EDTA. The probe was also utilized for detection Al3+ in living cells due to its excellent biocompatibility.

In vivo tumor active cancer targeting and CT-fluorescence dual-modal imaging with nanoprobe based on gold nanorods and InP/ZnS quantum dots.

In this paper, gold nanorods and InP/ZnS quantum dots were encapsulated together in a silica medium, and the targeting molecular peptide c(RGDfC) was further connected after surface modification with PEG and PEG derivatives to prepare a multifunctional Au@QD@SiO2/PEG-c(RGDfC) probe. Dynamic Light Scattering showed that the probe size was about 215.01 ± 2.72 nm, and its dispersibility was good. In in vitro experiments when the concentration was as high as 200 µg mL-1, the activity of the cells was still 85% due to low toxicity. In vivo experiments showed that the probe had excellent tumor targeting, X-ray computed tomography (CT) imaging and fluorescence imaging capabilities. The experiments revealed that the probe had a long blood circulation time (T1/2 = 7.78 h) in mice. Biochemical analysis, liver enzyme analysis and histomorphological analysis after probe injection showed that the probe had no obvious side effects on the normal functions of the main organs, indicating good biosafety. In vivo imaging experiments showed that 6 d after intravenous injection, the tumor sites of a HeLa tumor-bearing nude mice positive group presented obvious fluorescence and CT signals, indicating that the prepared nanoprobe had good tumor targeting dual-mode imaging capabilities and therefore showed great potential in biomedical imaging applications, especially the diagnosis of cancer.

Visual detection of trace lead ion based on aptamer and silver staining nano-metal composite.

In this paper, visual detection of trace lead ion was established by aptamer and silver staining. The basic strategy was that aminated PS2.M aptamer was immobilized onto slide and formed stable G-quadruplex structure. PbS was generated by adding S2-, and it catalyzed subsequent silver staining reaction, through the silver staining amplification effect, the slide presented visible ash black. The gray value of slide after silver staining was analyzed and the semi-quantitative detection of Pb2+ in solution was realized. The results showed that optical darkness ratio (ODR) and logarithmic value of Pb2+ concentration had a good linear relationship (R2 = 0.951) over the range of 0.5-10 µM. In addition, there was no obvious interference of other common metal ions for the detection, indicating that this method presented outstanding selectivity. And it was also used for qualitative and semi-quantitative determination of Pb2+ in soil sample successfully.

Quaternary Ammonium Polyamidoamine Dendrimer Modified Quantum Dots as Fluorescent Probes for p-Fluorophenoxyacetic Acid Detection in Aqueous Solution.

The wide use of pesticide p-fluorophenoxyacetic acid has caused the serious environmental contaminant. A novel fluorescent probe for sensitive detection of p-fluorophenoxyacetic acid in aqueous solutions based on 3.0G quaternary ammonium polyamidoamine (PAMAM) dendrimer modified quantum dots (QDs) (PAMAM@QDs) was reported. Through the solvent-evaporation method, quaternary ammonium PAMAM was employed to modify the QDs. Poloxamer 188 was used to improve the solubility and stability. The resultant PAMAM@QDs dispersed well in water. Fluorescence (FL) spectroscopic study showed that the FL intensity of the PAMAM@QDs was enhanced in the presence of p-fluorophenoxyacetic acid. Under optimal conditions, the enhanced FL intensity as a function of concentration matched very well in the range of 1 ~ 200 µg/mL of p-fluorophenoxyacetic acid, while the lower limits of detection were found to be 0.16 µg/mL. These results show that PAMAM@QDs is a promising luminescent probe for the detection of pesticides.

Graphite oxide-dispersed CdTe quantum dots nanocomposite for flexible display luminescent membranes.

A quantum dot (QD) dispersant material was prepared using graphite oxide (GO). Luminescent films were prepared using polyvinyl alcohol as the polymer matrix. First, water-soluble CdTe QDs were prepared by wet chemistry and GO was synthesized using a modified Hummers method. X-Ray diffraction tests showed that the GO reflection peak [001] was 11.9°, which indicates that the d-spacing is 0.7431 nm; atomic force microscopy showed a GO thickness of 200 nm. Fourier transform infrared spectra showed vibrations at 1624 cm-1 for the carbonyl groups, and 3260 cm-1 for the GO samples; the -C-O vibration was at 1320 cm-1 and -COOH, -OH vibrations were at 950 cm-1 . Fluorescent tests showed that pH had an impact on the QD colloidal stability. GO was neutralized before use as the host media for the GO/QDs nanocomposite. The results proved that the resultant nanocomposite is promising for use in brightness enhancement films in flexible displays.

Preparation of carbon quantum dots based high photostability luminescent membranes.

Urethane acrylate (UA) was used to prepare carbon quantum dots (C-dots) luminescent membranes and the resultants were examined with FT-IR, mechanical strength, scanning electron microscope (SEM) and quantum yields (QYs). FT-IR results showed the polyurethane acrylate (PUA) prepolymer -C = C-vibration at 1101 cm-1 disappeared but there was strong vibration at1687cm-1 which was contributed from the-C = O groups in cross-linking PUA. Mechanical strength results showed that the different quantity of C-dots loadings and UV-curing time affect the strength. SEM observations on the cross-sections of the membranes are uniform and have no structural defects, which prove that the C-dots are compatible with the water-soluble PUA resin. The C-dot loading was increased from 0 to 1 g, the maximum tensile stress was nearly 2.67 MPa, but the tensile strain was decreased from 23.4% to 15.1% and 7.2% respectively. QYs results showed that the C-dots in the membrane were stable after 120 h continuous irradiation. Therefore, the C-dots photoluminescent film is the promising material for the flexible devices in the future applications.

Quantum yield and lifetime data analysis for the UV curable quantum dot nanocomposites.

The quantum yield (QY) and lifetime are the important parameters for the photoluminescent materials. The data here report the changes of the QY and lifetime for the quantum dot (QD) nanocomposite after the UV curing of the urethane acrylate prepolymer. The data were collected based on the water soluble CdTe QDs and urethane acrylate prepolymer. Colloidal QDs were in various concentration from 0.5×10(-3) molL(-1) to 10×10(-3) molL(-1), and 1% (wt%) 1173 was the photoinitiator. The QY before the curing was 56.3%, 57.8% and 58.6% for the QDs 510 nm, 540 nm and 620 nm, respectively. The QY after the curing was changed to 8.9%, 9.6% and 13.4% for the QDs 510 nm, 540 nm and 620 nm, respectively. Lifetime data showed that the lifetime was changed from 23.71 ns, 24.55 ns, 23.52 ns to 1.29 ns, 2.74 ns, 2.45 ns for the QDs 510 nm, 540 nm and 620 nm, respectively.

Do the cations in clay and the polymer matrix affect quantum dot fluorescent properties?

This paper studied the effects of cations and polymer matrix on the fluorescent properties of quantum dots (QDs). The results indicated that temperature has a greater impact on fluorescence intensity than clay cations (mainly K(+) and Na(+) ). Combined fluorescence lifetime and steady-state spectrometer tests showed that QD lifetimes all decreased when the cation concentration was increased, but the quantum yields were steady at various cation concentrations of 0, 0.05, 0.5 and 1 M. Poly(ethylene oxide) (PEO), poly(vinyl alcohol) (PVA) and diepoxy resin were used to study the effects of polymers on QD lifetime and quantum yield. The results showed that the lifetime for QDs 550 nm in PEO and PVA was 17.33 and 17.12 ns, respectively; for the epoxy resin, the lifetime was 0.74 ns, a sharp decrease from 24.47 ns. The quantum yield for QDs 550 nm changed from 34.22% to 7.45% and 7.81% in PEO and PVA, respectively; for the epoxy resin the quantum yield was 2.25%. QDs 580 nm and 620 nm showed the same results as QDs 550 nm. This study provides useful information on the design, synthesis and application of QDs-polymer luminescent materials. Copyright © 2015 John Wiley & Sons, Ltd.

Quantum dots encoded Au coated polystyrene bead arranged micro-channel for multiplex arrays.

This paper describes a promising micro-channel multiplex immunoassay method based on the quantum dots encoded beads which requires micro-volume sample. Briefly, Au nanoparticles coated polystyrene (PS) beads were prepared and Quantum dots (QDs) were employed to encode 4 types of the PS beads by different emission wavelength QDs and various intensities. Different coding types of the beads were immobilized with different antibodies on the surface and BSA was used to block the unsatisfied sites. The antibody linked beads were then arranged in the 150 µm diameter optical capillary where the specific reactions took place before the detections. Results showed that the antibody on the Au coated surface maintains the bioactivity for the immunoreactions. Using this system, the fluorescent intensity was linear with analyte concentration in the range of 1×10(-7)-1×10(-5) mg/mL (RSD<5%, 4 repeats) and the lower detection limit reached 5×10(-8) mg/mL. It was proved to be a promising approach for the future miniaturization analytical devices.

High Sensitivity Bacillus thuringiensis Cry1Ac Protein Detections Using Fluorescein Diacetate Nanoparticles.

A highly sensitive transgenic protein analysis method was proposed here based on fluorescein diacetate (FDA). First, FDA was prepared by the ball mill to harvest the nano-sized organic particles. Further examines showed that the FDA size can be controlled by the speed of centrifugation which can obtain FDA in well-distributed size. Cy3 antibody immobilization tests showed that the proteins can attach onto the FDA particles while keep bioactivities. FDA and Cry1Ac antibody immunoassay tests showed that when the FDA particle was in 150 nm, the linear range was 0.01 ng/L-30 µg/mL. And it has the lower detection limitation of 0.01 ng/L, which is 100 times more sensitive than the ELISA methods. These results indicate that the FDA related immunoassays are the promising approach in the transgenic analysis.

A capillary based chemiluminscent multi-target immunoassay.

Renewed interest in capillary format immunoassays has lead to increasingly costly and complex approaches to preparation and readout. This study describes a simple multi-target method based on a capillary platform using horseradish peroxidase (HRP) labelled IgG to visualize an antibody antigen complex. When goat-anti-human IgG was employed as the probe and human IgG as target, the system allowed detection of target to less than 1 ng/mL using a standard detection approach. The capillaries were read visually or with a commercial grade CCD camera. Multi-target detection was demonstrated using a model system of rat-anti-mouse, goat-anti-human and mouse-anti-rat IgG. These probes were encoded to different locations in the capillary, providing a simple inexpensive approach to achieve multi-target assays.

Preparation of thermally stable well-dispersed water-soluble CdTe quantum dots in montmorillonite clay host media.

In this work, a method to prepare a thermally stable QDs/clay powder is reported. First, several water soluble CdTe QDs characterised by different size-dependent emission wavelengths were synthesised through wet chemistry. Montmorillonite-Na(+) clay in water was dispersed into a muddy suspension by sonication. Then, the clay-water suspension was used as the host media for CdTe QDs to prepare the QDs/clay powder by freeze drying. The experiments showed that QDs/clay powder could be re-dispersed in water without changing the luminescent property of the QDs; this process was reversible. EDX showed that Cd and Te elements existed in the QDs/clay powder and the XRD tests showed that the clay [001] reflection peaks for raw clay, QDs (λ(em)=514 nm)/clay and QDs (λ(em)=560 nm)/clay were the same, namely 2θ=7.4°. Finally, QDs/clay powder was applied to the HDPE polymer extrusion process at 200 °C to produce thin films; the resultant QDs-polymer nanocomposite film exhibited strong fluorescence.