Remote Activation of H-H Bonds by Platinum in Dilute Alloy Catalysts.

With heterogeneous catalysts, chemical promotion takes place at their surfaces. Even in the case of single-atom alloys, where small quantities of a reactive metal are dispersed within the main host, it is assumed that both elements are exposed and available to bond with the reactants. Here, we show, on the basis of in situ X-ray absorption spectroscopy data, that in alloy catalysts made from Pt highly diluted in Cu the Pt atoms are located at the inner interface between the metal nanoparticles and the silica support instead. Kinetic experiments indicated that these catalysts still display better selectivity for the hydrogenation of unsaturated aldehydes to unsaturated alcohols than the pure metals. Density functional theory calculations corroborated the stability of Pt at the metal-support interface and explained the catalytic performance as being due to a remote lowering of the activation barrier for the dissociation of H2 at Cu sites by the internal Pt atoms.

Atomic Design of Alkyne Semihydrogenation Catalysts via Active Learning.

Alkyne hydrogenation on palladium-based catalysts modified with silver is currently used in industry to eliminate trace amounts of alkynes in alkenes produced from steam cracking and alkane dehydrogenation processes. Intensive efforts have been devoted to designing an alternative catalyst for improvement, especially in terms of selectivity and catalyst cost, which is still far away from that as expected. Here, we describe an atomic design of a high-performance Ni-based intermetallic catalyst aided by active machine learning combined with density functional theory calculations. The engineered NiIn catalyst exhibits >97% selectivity to ethylene and propylene at the full conversion of acetylene and propyne at mild temperature, outperforming the reported Ni-based catalysts and even noble Pd-based ones. Detailed mechanistic studies using theoretical calculations and advanced characterizations elucidate that the atomic-level defined coordination environment of Ni sites and well-designed hybridization of Ni 3d with In 5p orbital determine the semihydrogenation pathway.

Synthesis of piperidines and pyridine from furfural over a surface single-atom alloy Ru1CoNP catalyst.

The sustainable production of value-added N-heterocycles from available biomass allows to reduce the reliance on fossil resources and creates possibilities for economically and ecologically improved synthesis of fine and bulk chemicals. Herein, we present a unique Ru1CoNP/HAP surface single-atom alloy (SSAA) catalyst, which enables a new type of transformation from the bio-based platform chemical furfural to give N-heterocyclic piperidine. In the presence of NH3 and H2, the desired product is formed under mild conditions with a yield up to 93%. Kinetic studies show that the formation of piperidine proceeds via a series of reaction steps. Initially, in this cascade process, furfural amination to furfurylamine takes place, followed by hydrogenation to tetrahydrofurfurylamine (THFAM) and then ring rearrangement to piperidine. DFT calculations suggest that the Ru1CoNP SSAA structure facilitates the direct ring opening of THFAM resulting in 5-amino-1-pentanol which is quickly converted to piperidine. The value of the presented catalytic strategy is highlighted by the synthesis of an actual drug, alkylated piperidines, and pyridine.

Catalyzing Generation and Stabilization of Oxygen Vacancies on CeO2-x Nanorods by Pt Nanoclusters as Nanozymes for Catalytic Therapy.

Although CeO2 nanomaterials have been widely explored as nanozymes for catalytic therapy, they still suffer from relatively low activities. Herein, the catalyzing generation and stabilization of oxygen vacancies on CeO2 nanorods by Pt nanoclusters via H2 gas reduction under mild temperature (350 °C) to obtain Pt/CeO2- x , which can serve as a highly efficient nanozyme for catalytic cancer therapy, is reported. The deposited Pt on CeO2 by the atomic layer deposition technique not only can serve as the catalyst to generate oxygen vacancies under mild temperature reduction through the hydrogen spillover effect, but also can stabilize the generated oxygen vacancies. Meanwhile, the oxygen vacancies also provide anchoring sites for Pt forming strong metal-support interactions and thus preventing their agglomerations. Importantly, the Pt/CeO2- x reduced at 350 °C (Pt/CeO2- x -350R) exhibits excellent enzyme-mimicking catalytic activity for generation of reactive oxygen species (e.g., ·OH) as compared to other control samples, including CeO2 , Pt/CeO2 , and Pt/CeO2- x reduced at other temperatures, thus achieving excellent performance for tumor-specific catalytic therapy to efficiently eliminate cancer cells in vitro and ablate tumors in vivo. The excellent enzyme-mimicking catalytic activity of Pt/CeO2- x -350R originates from the good catalytic activities of oxygen vacancy-rich CeO2- x and Pt nanoclusters.

Thermal management of natural gas production from coke oven gas by optimizing catalyst distribution and operation conditions.

In this work, 3D particle-resolved CFD simulations have been performed to investigate the thermal effects of natural gas production from coke oven gas. The catalyst packing structures with uniform, gradient rise and gradient descent distribution and the operating conditions of pressure, wall temperature, inlet temperature and feed velocity are optimized for reduced hot spot temperature. The simulation results show that compared with packing structures with uniform distribution and gradient descent distribution, the gradient rise distribution could effectively reduce the hot spot temperature without affecting the reactor performance in the reactor with upflow reactants feeding, of which the reactor bed temperature rise is 37 K. Under the conditions with the pressure of 20 bar, wall temperature of 500 K, inlet temperature of 593 K, inlet flow rate of 0.04 m/s, the packing structure with gradient rise distribution exhibits the minimum reactor bed temperature rise of 19 K. By optimizing the catalyst distribution and operation conditions, the hot spot temperature of CO methanation process could be dramatically reduced by 49 K at the sacrifice of slightly reduced CO conversion.

Ruthenium/TiO2 -Catalyzed Hydrogenolysis of Polyethylene Terephthalate: Reaction Pathways Dominated by Coordination Environment.

Polyethylene terephthalate (PET) hydrogenolysis can produce benzene, toluene, and xylene (BTX), where the selectivity control is challenging. We report a reaction pathway dictated by the Ru coordination environment by examining the binding geometries of adsorbates on differently coordinated Ru centers and their evolution during PET hydrogenolysis. A BTX yield of 77 % was obtained using a Ru/TiO2 with a Ru coordination number of ca. 5.0 where edge/corner sites are dominant, while more gas and saturated products were formed for Ru/TiO2 containing primarily terrace sites. Density functional theory and isotopic labelling revealed that under-coordinated Ru edge sites favor "upright" adsorption of aromatic adsorbates while well-coordinated Ru sites favor "flat-lying" adsorption, where the former mitigates ring hydrogenation and opening. This study demonstrates that reaction pathways can be directed through controlled reactant/intermediate binding via tuning of the Ru coordination environment for efficient conversion of PET to BTX.

In situ identification of surface sites in Cu-Pt bimetallic catalysts: Gas-induced metal segregation.

The effect of gases on the surface composition of Cu-Pt bimetallic catalysts has been tested by in situ infrared (IR) and x-ray absorption spectroscopies. Diffusion of Pt atoms within the Cu-Pt nanoparticles was observed both in vacuum and under gaseous atmospheres. Vacuum IR spectra of CO adsorbed on CuPtx/SBA-15 catalysts (x = 0-∞) at 125 K showed no bonding on Pt regardless of Pt content, but reversible Pt segregation to the surface was seen with the high-Pt-content (x ≥ 0.2) samples upon heating to 225 K. In situ IR spectra in CO atmospheres also highlighted the reversible segregation of Pt to the surface and its diffusion back into the bulk when cycling the temperature from 295 to 495 K and back, most evidently for diluted single-atom alloy catalysts (x ≤ 0.01). Similar behavior was possibly observed under H2 using small amounts of CO as a probe molecule. In situ x-ray absorption near-edge structure data obtained for CuPt0.2/SBA-15 under both CO and He pointed to the metallic nature of the Pt atoms irrespective of gas or temperature, but analysis of the extended x-ray absorption fine structure identified a change in coordination environment around the Pt atoms, from a (Pt-Cu):(Pt-Pt) coordination number ratio of ∼6:6 at or below 445 K to 8:4 at 495 K. The main conclusion is that Cu-Pt bimetallic catalysts are dynamic, with the composition of their surfaces being dependent on temperature in gaseous environments.

Increasing the Distance of Adjacent Palladium Atoms for Configuration Matching in Selective Hydrogenation.

Precisely tailoring the distance between adjacent metal sites to match adsorption configurations of key species for the targeted reaction pathway is a great challenge in heterogeneous catalysis. Here, we report a proof-of-concept study on the atomically sites-tailored pathway in Pd-catalyzed acetylene hydrogenation, i.e., increasing the distance of adjacent Pd atoms (dPd-a-Pd ) for configuration matching in acetylene semi-hydrogenation against coupling. dPd-a-Pd is identified as a structural descriptor for describing the competitiveness for reaction pathways, and the increased dPd-a-Pd prefers the semi-hydrogenation pathway due to simultaneously promoted C2 H4 desorption and the destabilized transition state of the C2 H3 * coupling. Spectroscopic, kinetics and electronic structure studies reveal that increasing dPd-a-Pd to 3.31 Šdelivers superior selectivity and stability due to energy matching and appropriate hybridization of Pd 4d with In 2s and, especially, 2p orbitals.

Mechanism driven design of trimer Ni1Sb2 site delivering superior hydrogenation selectivity to ethylene.

Mechanism driven catalyst design with atomically uniform ensemble sites is an important yet challenging issue in heterogeneous catalysis associated with breaking the activity-selectivity trade-off. Herein, a trimer Ni1Sb2 site in NiSb intermetallic featuring superior selectivity is elaborated for acetylene semi-hydrogenation via a theoretical guidance with a precise synthesis strategy. The trimer Ni1Sb2 site in NiSb intermetallic is predicted to endow acetylene reactant with an adequately but not excessively strong σ-adsorption mode while ethylene product with a weak π-adsorption one, where such compromise delivers higher ethylene formation rate. An in-situ trapping of molten Sb by Ni strategy is developed to realize the construction of Ni1Sb2 site in the intermetallic P63/mmc NiSb catalysts. Such catalyst exhibits ethylene selectivity up to 93.2% at 100% of acetylene conversion, significantly prevailing over the referred Ni catalyst. These insights shed new lights on rational catalyst design by taming active sites to energetically match targeted reaction pathway.

Mechanistic insights into acid-affected hydrogenolysis of glycerol to 1,3-propanediol over an Ir-Re/SiO2 catalyst.

Glycerol hydrogenolysis to 1,3-propanediol is identified to follow the dehydration-hydrogenation pathway with the rate-determining step (RDS) of H* + OH* → H2O* over an IrRe catalyst. The positive effects of solid acids are elucidated to originate from the reduced energy barrier of the RDS by H protons, while the negative ones of liquid acids are from excessively strong adsorption of anions.

A flexible and disposable electrochemical sensor for the evaluation of arsenic levels: A new and efficient method for the batch fabrication of chemically modified electrodes.

In this study, a novel flexible and disposable electrochemical sensor was fabricated through the straightforward laser-induced synthesis of catalytic Au nanoparticles (AuNPs)@LIG composite for the square wave stripping voltammetry (SWASV) determination of arsenic in soil. In this process, polyimide and a metal precursor (PI-MP) were transformed to three-dimensional porous LIG and AuNPs through the graphitization, photoreduction and thermal reduction of laser ablation. To our knowledge, this is the first time that laser-induced PI-MP was employed to fabricate chemically modified electrodes on a large scale for arsenic determination. X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectrometer (EDX), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and N2 adsorption isotherm were used to characterize the morphological and physical properties of the materials, which demonstrated the successful synthesis of AuNPs@LIG nanocomposite. Additionally, the mechanism of AuNPs@LIG synthesis by laser induction was also investigated, and the deposition potential and the deposition time for the SWASV determination of arsenic were also optimized. The electrochemical sensor fabricated using the proposed method shows satisfactory sensitivity, stability and reliability and exhibits a good linear relationship over concentrations ranging from 0 to 40 µg/L, with a low determination limit of 0.18 µg/L. Furthermore, the obtained AuNPs@LIG surface exhibited good conductivity with a charge transfer resistance (Rct) of 73.85 Ω and a large real surface area of 807.28 mm2. Finally, several real soil samples were analyzed using the prepared sensor with a satisfactory result, which verified the feasibility of this sensor. The results show that the method for chemically modified electrode fabrication proposed in this paper has good commercial potential for the batch manufacturing of electrochemical sensors.

Interfacial-confined coordination to single-atom nanotherapeutics.

Pursuing and developing effective methodologies to construct highly active catalytic sites to maximize the atomic and energy efficiency by material engineering are attractive. Relative to the tremendous researches of carbon-based single atom systems, the construction of bio-applicable single atom materials is still in its infancy. Herein, we propose a facile and general interfacial-confined coordination strategy to construct high-quality single-atom nanotherapeutic agent with Fe single atoms being anchored on defective carbon dots confined in a biocompatible mesoporous silica nanoreactor. Furthermore, the efficient energy conversion capability of silica-based Fe single atoms system has been demonstrated on the basis of the exogenous physical photo irradiation and endogenous biochemical reactive oxygen species stimulus in the confined mesoporous network. More importantly, the highest photothermal conversion efficiency with the mechanism of increased electron density and narrow bandgap of this single atom structure in defective carbon was proposed by the theoretical DFT calculations. The present methodology provides a scientific paradigm to design and develop versatile single atom nanotherapeutics with adjustable metal components and tune the corresponding reactions for safe and efficient tumor therapeutic strategy.

Molecular-level insights into the electronic effects in platinum-catalyzed carbon monoxide oxidation.

A molecular-level understanding of how the electronic structure of metal center tunes the catalytic behaviors remains a grand challenge in heterogeneous catalysis. Herein, we report an unconventional kinetics strategy for bridging the microscopic metal electronic structure and the macroscopic steady-state rate for CO oxidation over Pt catalysts. X-ray absorption and photoelectron spectroscopy as well as electron paramagnetic resonance investigations unambiguously reveal the tunable Pt electronic structures with well-designed carbon support surface chemistry. Diminishing the electron density of Pt consolidates the CO-assisted O2 dissociation pathway via the O*-O-C*-O intermediate directly observed by isotopic labeling studies and rationalized by density-functional theory calculations. A combined steady-state isotopic transient kinetic and in situ electronic analyses identifies Pt charge as the kinetics indicators by being closely related to the frequency factor, site coverage, and activation energy. Further incorporation of catalyst structural parameters yields a novel model for quantifying the electronic effects and predicting the catalytic performance. These could serve as a benchmark of catalyst design by a comprehensive kinetics study at the molecular level.

Unleash electron transfer in C-H functionalization by mesoporous carbon-supported palladium interstitial catalysts.

The functionalization of otherwise unreactive C-H bonds adds a new dimension to synthetic chemistry, yielding useful molecules for a range of applications. Arylation has emerged as an increasingly viable strategy for functionalization of heteroarenes which constitute an important class of structural moieties for organic materials. However, direct bisarylation of heteroarenes to enable aryl-heteroaryl-aryl bond formation remains a formidable challenge, due to the strong coordination between heteroatom of N or S and transitional metals. Here we report Pd interstitial nanocatalysts supported on ordered mesoporous carbon as catalysts for a direct and highly efficient bisarylation method for five-membered heteroarenes that allows for green and mild reaction conditions. Notably, in the absence of any base, ligands and phase transfer agents, high activity (turn-over frequency, TOF, up to 107 h-1) and selectivity (>99%) for the 2,5-bisarylation of five-membered heteroarenes are achieved in water. A combination of characterization reveals that the remarkable catalytic reactivity here is attributable to the parallel adsorption of heteroarene over Pd clusters, which breaks the barrier to electron transfer in traditional homogenous catalysis and creates dual electrophilic sites for aryl radicals and adsorbate at C2 and C5 positions. The d-band filling at Pd sites shows a linear relationship with activation entropy and catalytic activity. The ordered mesopores facilitate the absence of a mass transfer effect. These findings suggest alternative synthesis pathways for the design, synthesis and understanding of a large number of organic chemicals by ordered mesoporous carbon supported palladium catalysts.

Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries.

Critical barriers to layered Ni-rich cathode commercialisation include their rapid capacity fading and thermal runaway from crystal disintegration and their interfacial instability. Structure combines surface modification is the ultimate choice to overcome these. Here, a synchronous gradient Al-doped and LiAlO2-coated LiNi0.9Co0.1O2 cathode is designed and prepared by using an oxalate-assisted deposition and subsequent thermally driven diffusion method. Theoretical calculations, in situ X-ray diffraction results and finite-element simulation verify that Al3+ moves to the tetrahedral interstices prior to Ni2+ that eliminates the Li/Ni disorder and internal structure stress. The Li+-conductive LiAlO2 skin prevents electrolyte penetration of the boundaries and reduces side reactions. These help the Ni-rich cathode maintain a 97.4% cycle performance after 100 cycles, and a rapid charging ability of 127.7 mAh g-1 at 20 C. A 3.5-Ah pouch cell with the cathode and graphite anode showed more than a 500-long cycle life with only a 5.6% capacity loss.

Role of C-Defective Sites in CO Adsorption over ϵ-Fe2 C and η-Fe2 C Fischer-Tropsch Catalysts.

Herein, we report the crucial importance of C-defective sites on the CO adsorption over ϵ-Fe2 C and η-Fe2 C Fischer-Tropsch catalysts via systematic DFT calculations. The simulated XRD and Wulff construction show the significant differences in their equilibrium shapes and most exposed surfaces. It is observed that the ϵ-Fe2 C exposes a high proportion (89 %) of facets (1 2 ‾ 1) with similar structure to that of η-Fe2 C (011) which has been proved to be the active surface of CO activation.

Gold catalysts containing interstitial carbon atoms boost hydrogenation activity.

Supported gold nanoparticles are emerging catalysts for heterogeneous catalytic reactions, including selective hydrogenation. The traditionally used supports such as silica do not favor the heterolytic dissociation of hydrogen on the surface of gold, thus limiting its hydrogenation activity. Here we use gold catalyst particles partially embedded in the pore walls of mesoporous carbon with carbon atoms occupying interstitial sites in the gold lattice. This catalyst allows improved electron transfer from carbon to gold and, when used for the chemoselective hydrogenation of 3-nitrostyrene, gives a three times higher turn-over frequency (TOF) than that for the well-established Au/TiO2 system. The d electron gain of Au is linearly related to the activation entropy and TOF. The catalyst is stable, and can be recycled ten times with negligible loss of both reaction rate and overall conversion. This strategy paves the way for optimizing noble metal catalysts to give an enhanced hydrogenation catalytic performance.

Adsorption Site Regulation to Guide Atomic Design of Ni-Ga Catalysts for Acetylene Semi-Hydrogenation.

Atomic regulation of metal catalysts has emerged as an intriguing yet challenging strategy to boost product selectivity. Here, we report a density functional theory-guided atomic design strategy for the fabrication of a NiGa intermetallic catalyst with completely isolated Ni sites to optimize acetylene semi-hydrogenation processes. Such Ni sites show not only preferential acetylene π-adsorption, but also enhanced ethylene desorption. The characteristics of the Ni sites are confirmed by multiple characterization techniques, including aberration-corrected high-resolution scanning transmission electron microscopy and X-ray absorption spectrometry measurements. The superior performance is also confirmed experimentally against a Ni5 Ga3 intermetallic catalyst with partially isolated Ni sites and against a Ni catalyst with multi-atomic ensemble Ni sites. Accordingly, the NiGa intermetallic catalyst with the completely isolated Ni sites shows significantly enhanced selectivity to ethylene and suppressed coke formation.

Construction of highly accessible single Co site catalyst for glucose detection.

The development of high-performance glucose sensors is an urgent need, especially for diabetes mellitus diagnosis. However, the glucose monitoring is conventionally operated in an invasive finger-prick manner and their noninvasive alternatives largely suffered from the relatively poor sensitivity, selectivity, and stability, resulted from the lack of robust and efficient catalysts. In this paper, we design a concave shaped nitrogen-doped carbon framework embellished with single Co site catalyst (Co SSC) by selectively controlling the etching rate on different facet of carbon substrate, which is beneficial to the diffusion and contact of analyte. The Co SSC prompts a significant improvement in the sensitivity of the solution-gated graphene transistor (SGGT) devices, with three orders of magnitude better than those of SGGT devices without catalysts. Our findings expand the field of single site catalyst in the application of biosensors, diabetes diagnostics and personalized health-care monitoring.

Eye-Readable Detection and Oxidation of CO with a Platinum-Based Catalyst and a Binuclear Rhodium Complex.

Toxic gases that are colorless and odorless, such as CO, are a major environmental concern and require early detection to prevent serious toxicological effects. In this study, a unique system (Pt/HMSs-BRC) was fabricated by combining a catalyst (Pt/hollow mesoporous silica spheres, Pt/HMSs) with a silica gel containing an adsorbed chromogenic probe (binuclear rhodium complex, BRC). The process is a simple method to prepare well-dispersed and uniform Pt nanoparticles. The Pt/HMSs-BRC materials demonstrated early CO detection and excellent catalytic performance for CO oxidation. The probe exhibited remarkable color modulation from gray-violet to light-yellow when exposed to CO concentration levels above 50 ppm, and the color of the chromogenic probe was fully recoverable. By a kinetics-assisted discrimination method and DFT calculations, it was found that the corner Pt sites are the dominant active sites for CO oxidation.