n-type Ge/Si antennas for THz sensing.

Ge-on-Si plasmonics holds the promise for compact and low-cost solutions in the manipulation of THz radiation. We discuss here the plasmonic properties of doped Ge bow-tie antennas made with a low-point cost CMOS mainstream technology. These antennas display resonances between 500 and 700 GHz, probed by THz time domain spectroscopy. We show surface functionalization of the antennas with a thin layer of α-lipoic acid that red-shifts the antenna resonances by about 20 GHz. Moreover, we show that antennas protected with a silicon nitride cap layer exhibit a comparable red-shift when covered with the biolayer. This suggests that the electromagnetic fields at the hotspot extend well beyond the cap layer, enabling the possibility to use the antennas with an improved protection of the plasmonic material in conjunction with microfluidics.

Design and simulation of losses in Ge/SiGe terahertz quantum cascade laser waveguides.

The waveguide losses from a range of surface plasmon and double metal waveguides for Ge/Si1-xGex THz quantum cascade laser gain media are investigated at 4.79 THz (62.6 µm wavelength). Double metal waveguides demonstrate lower losses than surface plasmonic guiding with minimum losses for a 10 µm thick active gain region with silver metal of 21 cm-1 at 300 K reducing to 14.5 cm-1 at 10 K. Losses for silicon foundry compatible metals including Al and Cu are also provided for comparison and to provide a guide for gain requirements to enable lasers to be fabricated in commercial silicon foundries. To allow these losses to be calculated for a range of designs, the complex refractive index of a range of nominally undoped Si1-xGex with x = 0.7, 0.8 and 0.9 and doped Ge heterolayers were extracted from Fourier transform infrared spectroscopy measurements between 0.1 and 10 THz and from 300 K down to 10 K. The results demonstrate losses comparable to similar designs of GaAs/AlGaAs quantum cascade laser plasmon waveguides indicating that a gain threshold of 15.1 cm-1 and 23.8 cm-1 are required to produce a 4.79 THz Ge/SiGe THz laser at 10 K and 300 K, respectively, for 2 mm long double metal waveguide quantum cascade lasers with facet coatings.

Gate-controlled quantum dots and superconductivity in planar germanium.

Superconductors and semiconductors are crucial platforms in the field of quantum computing. They can be combined to hybrids, bringing together physical properties that enable the discovery of new emergent phenomena and provide novel strategies for quantum control. The involved semiconductor materials, however, suffer from disorder, hyperfine interactions or lack of planar technology. Here we realise an approach that overcomes these issues altogether and integrate gate-defined quantum dots and superconductivity into germanium heterostructures. In our system, heavy holes with mobilities exceeding 500,000 cm2 (Vs)-1 are confined in shallow quantum wells that are directly contacted by annealed aluminium leads. We observe proximity-induced superconductivity in the quantum well and demonstrate electric gate-control of the supercurrent. Germanium therefore has great promise for fast and coherent quantum hardware and, being compatible with standard manufacturing, could become a leading material for quantum information processing.

Growth and evolution of nickel germanide nanostructures on Ge(001).

Nickel germanide is deemed an excellent material system for low resistance contact formation for future Ge device modules integrated into mainstream, Si-based integrated circuit technologies. In this study, we present a multi-technique experimental study on the formation processes of nickel germanides on Ge(001). We demonstrate that room temperature deposition of ∼1 nm of Ni on Ge(001) is realized in the Volmer-Weber growth mode. Subsequent thermal annealing results first in the formation of a continuous NixGey wetting layer featuring well-defined terrace morphology. Upon increasing the annealing temperature to 300 °C, we observed the onset of a de-wetting process, characterized by the appearance of voids on the NixGey terraces. Annealing above 300 °C enhances this de-wetting process and the surface evolves gradually towards the formation of well-ordered, rectangular NixGey 3D nanostructures. Annealing up to 500 °C induces an Ostwald ripening phenomenon, with smaller nanoislands disappearing and larger ones increasing their size. Subsequent annealing to higher temperatures drives the Ni-germanide diffusion into the bulk and the consequent formation of highly ordered, {111} faceted Ni-Ge nanocrystals featuring an epitaxial relationship with the substrate Ni-Ge (101); (010) || Ge(001); (110).

Tailoring the strain in Si nano-structures for defect-free epitaxial Ge over growth.

We investigate the structural properties and strain state of Ge nano-structures selectively grown on Si pillars of about 60 nm diameter with different SiGe buffer layers. A matrix of TEOS SiO2 surrounding the Si nano-pillars causes a tensile strain in the top part at the growth temperature of the buffer that reduces the misfit and supports defect-free initial growth. Elastic relaxation plays the dominant role in the further increase of the buffer thickness and subsequent Ge deposition. This method leads to Ge nanostructures on Si that are free from misfit dislocations and other structural defects, which is not the case for direct Ge deposition on these pillar structures. The Ge content of the SiGe buffer is thereby not a critical parameter; it may vary over a relatively wide range.

Ba termination of Ge(001) studied with STM.

We use controlled annealing to tune the interfacial properties of a sub-monolayer and monolayer coverages of Ba atoms deposited on Ge(001), enabling the generation of either of two fundamentally distinct interfacial phases, as revealed by scanning tunneling microscopy. Firstly we identify the two key structural phases associated with this adsorption system, namely on-top adsorption and surface alloy formation, by performing a deposition and annealing experiment at a coverage low enough (∼0.15 ML) that isolated Ba-related features can be individually resolved. Subsequently we investigate the monolayer coverage case, of interest for passivation schemes of future Ge based devices, for which we find that the thermal evaporation of Ba onto a Ge(001) surface at room temperature results in on-top adsorption. This separation (lack of intermixing) between Ba and Ge layers is retained through successive annealing steps to temperatures of 470, 570, 670 and 770 K although a gradual ordering of the Ba layer is observed at 570 K and above, accompanied by a decrease in Ba layer density. Annealing above 770 K produces the 2D surface alloy phase accompanied by strain relief through monolayer height trench formation. An annealing temperature of 1070 K sees a further change in surface morphology but retention of the 2D surface alloy characteristic. These results are discussed in view of their possible implications for future semiconductor integrated circuit technology.

Tensile Ge microstructures for lasing fabricated by means of a silicon complementary metal-oxide-semiconductor process.

In this work we study, using experiments and theoretical modeling, the mechanical and optical properties of tensile strained Ge microstructures directly fabricated in a state-of-the art complementary metal-oxide-semiconductor fabrication line, using fully qualified materials and methods. We show that these microstructures can be used as active lasing materials in mm-long Fabry-Perot cavities, taking advantage of strain-enhanced direct band gap recombination. The results of our study can be realistically applied to the fabrication of a prototype platform for monolithic integration of near infrared laser sources for silicon photonics.

Narrow intersubband transitions in n-type Ge/SiGe multi-quantum wells: control of the terahertz absorption energy trough the temperature dependent depolarization shift.

In this paper we present a detailed study of the intersubband absorption occurring between electron states confined in strained Ge multi-quantum wells as a function of the temperature. The high structural quality of the samples is reflected by the very narrow absorption line-shape constant with temperature. We observe a temperature driven charge transfer occurring between the ground and the first excited subband which, in turn, induces a change in the depolarization shift and consequently in the energy of the absorbance peak. The experimental observations are well accounted for by a multi-valley k·p model.

Stacking of 2D electron gases in Ge probed at the atomic level and its correlation to low-temperature magnetotransport.

Stacking of two-dimensional electron gases (2DEGs) obtained by δ-doping of Ge and patterned by scanning probe lithography is a promising approach to realize ultrascaled 3D epitaxial circuits, where multiple layers of active electronic components are integrated both vertically and horizontally. We use atom probe tomography and magnetotransport to correlate the real space 3D atomic distribution of dopants in the crystal with the quantum correction to the conductivity observed at low temperatures, probing if closely stacked δ-layers in Ge behave as independent 2DEGs. We find that at a separation of 9 nm the stacked-2DEGs, while interacting, still maintain their individuality in terms of electron transport and show long phase coherence lengths (∼220 nm). Strong vertical electron confinement is crucial to this finding, resulting in an interlayer scattering time much longer (∼1000 × ) than the scattering time within the dopant plane.

n-type doping of germanium from phosphine: early stages resolved at the atomic level.

To understand the atomistic doping process of phosphorus in germanium, we present a combined scanning tunneling microscopy, temperature programed desorption, and density functional theory study of the reactions of phosphine with the Ge(001) surface. Combining experimental and theoretical results, we demonstrate that PH(2) + H with a footprint of one Ge dimer is the only product of room temperature chemisorption. Further dissociation requires thermal activation. At saturation coverage, PH(2) + H species self-assemble into ordered patterns leading to phosphorus coverages of up to 0.5 monolayers.

Phosphorus atomic layer doping of germanium by the stacking of multiple δ layers.

In this paper we demonstrate the fabrication of multiple, narrow, and closely spaced δ-doped P layers in Ge. The P profiles are obtained by repeated phosphine adsorption onto atomically flat Ge(001) surfaces and subsequent thermal incorporation of P into the lattice. A dual-temperature epitaxial Ge overgrowth separates the layers, minimizing dopant redistribution and guaranteeing an atomically flat starting surface for each doping cycle. This technique allows P atomic layer doping in Ge and can be scaled up to an arbitrary number of doped layers maintaining atomic level control of the interface. Low sheet resistivities (280 Ω/ [symbol see text ) and high carrier densities (2 × 10(14) cm( - 2), corresponding to 7.4 × 10(19) cm( - 3)) are demonstrated at 4.2 K.

A complete fabrication route for atomic-scale, donor-based devices in single-crystal germanium.

Despite the rapidly growing interest in Ge for ultrascaled classical transistors and innovative quantum devices, the field of Ge nanoelectronics is still in its infancy. One major hurdle has been electron confinement since fast dopant diffusion occurs when traditional Si CMOS fabrication processes are applied to Ge. We demonstrate a complete fabrication route for atomic-scale, donor-based devices in single-crystal Ge using a combination of scanning tunneling microscope lithography and high-quality crystal growth. The cornerstone of this fabrication process is an innovative lithographic procedure based on direct laser patterning of the semiconductor surface, allowing the gap between atomic-scale STM-patterned structures and the outside world to be bridged. Using this fabrication process, we show electron confinement in a 5 nm wide phosphorus-doped nanowire in single-crystal Ge. At cryogenic temperatures, Ohmic behavior is observed and a low planar resistivity of 8.3 kΩ/□ is measured.

Preparation of the Ge(001) surface towards fabrication of atomic-scale germanium devices.

We demonstrate the preparation of a clean Ge(001) surface with minimal roughness (RMS ~0.6 Å), low defect densities (~0.2% ML) and wide mono-atomic terraces (~80-100 nm). We use an ex situ wet chemical process combined with an in situ anneal treatment followed by a homoepitaxial buffer layer grown by molecular beam epitaxy and a subsequent final thermal anneal. Using scanning tunneling microscopy, we investigate the effect on the surface morphology of using different chemical reagents, concentrations as well as substrate temperature during growth. Such a high quality Ge(001) surface enables the formation of defect-free H-terminated Ge surfaces for subsequent patterning of atomic-scale devices by scanning tunneling lithography. We have achieved atomic-scale dangling bond wire structures 1.6 nm wide and 40 nm long as well as large, micron-size patterns with clear contrast of lithography in STM images.

Atomic-scale patterning of hydrogen terminated Ge(001) by scanning tunneling microscopy.

In this paper we demonstrate atomic-scale lithography on hydrogen terminated Ge(001). The lithographic patterns were obtained by selectively desorbing hydrogen atoms from a H resist layer adsorbed on a clean, atomically flat Ge(001) surface with a scanning tunneling microscope tip operating in ultra-high vacuum. The influence of the tip-to-sample bias on the lithographic process have been investigated. Lithographic patterns with feature-sizes from 200 to 1.8 nm have been achieved by varying the tip-to-sample bias. These results open up the possibility of a scanning-probe lithography approach to the fabrication of future atomic-scale devices in germanium.

Self-ordering of a Ge island single layer induced by Si overgrowth.

We provide a direct experimental proof and the related modeling of the role played by Si overgrowth in promoting the lateral ordering of Ge islands grown by chemical vapor deposition on Si(001). The deposition of silicon induces a shape transformation, from domes to truncated pyramids with a larger base, generating an array of closely spaced interacting islands. By modeling, we show that the resulting gradient in the chemical potential across the island should be the driving force for a selective flow of both Ge and Si atoms at the surface and, in turn, to a real motion of the dots, favoring the lateral order.

[Clinico-laboratory evaluation a new sustained-release preparation of anhydrous theophylline]. / Valutazione clinico-laboratoristica di una nuova teofillina anidra a lento rilascio.

The clinical effectiveness and the pharmacokinetic parameters of a once-a-day sustained release preparation of anhydrous theophylline were studied in a trial carried out on 10 adult patients affected by bronchial asthma or chronic obstructive lung disease. Treatment with this new theophylline preparation allowed us to obtain mean serum concentrations within the therapeutic range (5-20 mcg/ml) which remained quite constant during 24 hours. All patients evidenced improvement of dyspnea and of the signs of bronchospasm. Tolerability was very good.