Striatin knock out induces a gain of function of INa and impaired Ca2+ handling in mESC-derived cardiomyocytes.

AIM: Striatin (Strn) is a scaffold protein expressed in cardiomyocytes (CMs) and alteration of its expression are described in various cardiac diseases. However, the alteration underlying its pathogenicity have been poorly investigated. METHODS: We studied the role(s) of cardiac Strn gene (STRN) by comparing the functional properties of CMs, generated from Strn-KO and isogenic WT mouse embryonic stem cell lines. RESULTS: The spontaneous beating rate of Strn-KO CMs was faster than WT cells, and this correlated with a larger fast INa conductance and no changes in If. Paced (2-8 Hz) Strn-KO CMs showed prolonged action potential (AP) duration in comparison with WT CMs and this was not associated with changes in ICaL and IKr. Motion video tracking analysis highlighted an altered contraction in Strn-KO CMs; this was associated with a global increase in intracellular Ca2+, caused by an enhanced late Na+ current density (INaL) and a reduced Na+/Ca2+ exchanger (NCX) activity and expression. Immunofluorescence analysis confirmed the higher Na+ channel expression and a more dynamic microtubule network in Strn-KO CMs than in WT. Indeed, incubation of Strn-KO CMs with the microtubule stabilizer taxol, induced a rescue (downregulation) of INa conductance toward WT levels. CONCLUSION: Loss of STRN alters CMs electrical and contractile profiles and affects cell functionality by a disarrangement of Strn-related multi-protein complexes. This leads to impaired microtubules dynamics and Na+ channels trafficking to the plasma membrane, causing a global Na+ and Ca2+ enhancement.

Evaluation of in vitro SARS-CoV-2 inactivation by a new quaternary ammonium compound: Bromiphen bromide.

The pneumonia (COVID-19) outbreak caused by the novel coronavirus named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which unpredictably exploded in late December of 2019 has stressed the importance of being able to control potential pathogens with the aim of limiting their spread. Although vaccines are well known as a powerful tool for ensuring public health and controlling the pandemic, disinfection and hygiene habits remain crucial to prevent infection from spreading and maintain the barrier, especially when the microorganism can persist and survive on textiles, surfaces, and medical devices. During the coronavirus disease pandemic, around half of the disinfectants authorized by the US Environmental Protection Agency contained quaternary ammonium compounds (QACs); their effectiveness had not been proven. Herein, the in vitro SARS-CoV-2 inactivation by p-bromodomiphen bromide, namely bromiphen (BRO), a new, potent, and fast-acting QAC is reported. This study demonstrates that BRO, with a dose as low as 0.02%, can completely inhibit SARS-CoV-2 replication in just 30 s. Its virucidal activity was 10- and 100-fold more robust compared to other commercially available QACs, namely domiphen bromide and benzalkonium chloride. The critical micellar concentration and the molecular lipophilicity potential surface area support the relevance of the lipophilic nature of these molecules for their activity.

SARS-CoV-2 hampers dopamine production in iPSC-derived dopaminergic neurons.

An increasing number of patients experiences prolonged symptoms, whose profile and timeline remain uncertain, a condition that has been defined as post COVID. The majority of recovered hospitalized patients manifests at least one persistent symptom even sixty days after the first clinical manifestation's onset. Particularly, in light of the COVID-19-related symptomatology, it has been hypothesized that SARS-CoV-2 might affect the dopamine pathway. However, no scientific evidence has been produced so far. To this end, human iPSC-derived dopaminergic neurons were infected with EU, Delta and Omicron SARS-CoV-2 variants. The infection with EU and Delta variants, but not with Omicron, results in a reduced intracellular content and extracellular release of dopamine. Indeed, the tyrosine hydroxylase was found to be significantly upregulated at the mRNA level, while being greatly reduced at the protein level. The major downstream synthetic enzyme DOPA-decarboxylase and the dopamine transporter were significantly downregulated both at the mRNA and protein level. Notably, in vitro SARS-CoV-2 infection was also associated with an altered MAP2 and TAU expression and with an increased presence of neuronal stress markers. These preliminary observations suggest that the dopamine metabolism and production are affected by SARS-CoV-2, partially explaining some of the neurological symptoms manifested.

Wine putrescine abatement by bentonites: From ideal case to practice.

Herein, we demonstrated that bentonites can be incisively used to reduce wine BAs content, especially putrescine molecules. Pioneering kinetic and thermodynamic studies of putrescine adsorption onto two commercially available bentonites (optimal concentration of 0.40 g dm-3) were performed resulting in ca. 60% removal by physisorption mechanism. Both bentonites showed also promising results in more complex systems, resulting in a lower putrescine adsorption due to the competition with other molecules (as proteins, polyphenols), typically present in wines. Nonetheless, we managed to reduce the putrescine content below 10 ppm both in red and white wines.

A comprehensive study on the effect of bentonite fining on wine charged model molecules.

In bottled wines, haze and turbidity are phenomena to be avoided. Since bentonite fining is a common process to clarify wines removing heat unstable proteins, a theoretical study on the adsorption of three Charged Model Molecules (CMMs, egg albumin, polyphenols and riboflavin) was carried out to deep comprehend this chemical phenomenon. Four bentonites were adopted and finely characterized together with the potential release of Na+ and Ca2+ cations, revealing suitable for RT albumin removal within 120 min. Better results in terms of adsorbed quantity were achieved by adopting 12%v/v EtOH/H2O solvent and by swelling bentonites for 24 h before use. With the most performing sample (Na/Ca_0.27), a comprehensive study on simultaneous adsorption of the three CMMs was performed, resulting in polyphenols adsorption increase due to their interactions with albumin. Notwithstanding the majority of albumin and riboflavin was successfully removed, ca. 40-50% of tested polyphenols was preserved.

Zn- vs Bi-based oxides for o-toluidine photocatalytic treatment under solar light.

The photodegradation of the highly toxic o-toluidine pollutant was deeply investigated both under UV and solar irradiations by using three different semiconductors: pure ZnO, Bi-impregnated ZnO, and Bi2O3 nanopowders (synthesized by precipitating method). All the samples were deeply characterized on structural, morphological, surface, and optical points of view. The disappearance and the relative mineralization of o-toluidine molecules were followed by linear sweep voltammetry (LSV) and total organic carbon (TOC) determinations, respectively. Hence, correlations between their physico-chemical properties and the photocatalytic performances, passing from UV to solar light, were drawn and a hypothesis on the photodegradation mechanism has been proposed, on the basis of the HPLC/MS results. Bare Bi2O3 samples, due to the exploitation of both their visible light absorption and the negligible intermediates formation, resulted to be higher performing under solar irradiation than either pure or Bi-doped ZnO nanopowders. Graphical abstract.

Advanced mortar coatings for cultural heritage protection. Durability towards prolonged UV and outdoor exposure.

In the present work, two kinds of hybrid polymeric-inorganic coatings containing TiO2 or SiO2 particles and prepared starting from two commercial resins (Alpha®SI30 and Bluesil®BP9710) were developed and applied to two kinds of mortars (an air-hardening calcic lime mortar [ALM] and a natural hydraulic lime mortar [HLM]) to achieve better performances in terms of water repellence and consequently damage resistance. The two pure commercial resins were also applied for comparison purposes. Properties of the coated materials and their performance were studied using different techniques such as contact angle measurements, capillary absorption test, mercury intrusion porosimetry, surface free energy, colorimetric measurements and water vapour permeability tests. Tests were also performed to determine the weathering effects on both the commercial and the hybrid coatings in order to study their durability. Thus, exposures to UV radiation, to UV radiation/condensed water cycles and to a real polluted atmospheric environment have been performed. The effectiveness of the hybrid SiO2 based coating was demonstrated, especially in the case of the HLM mortar.

Microtubule Destabilization Paves the Way to Parkinson's Disease.

Microtubules are dynamic structures normally associated to the cell division, during which they form the mitotic spindle, as well as to the initial phases of specification and polarization of various cell types, including neurons. Although microtubules could have a role in the death of many cells and tissues, the microtubule-based degenerative mechanisms have been poorly investigated; nevertheless, during the last two decades, many clues have been accumulated suggesting the importance of the microtubule system during neurodegeneration. Thus, the aim of this review is to analyse how the changes of the microtubule cytoskeleton, in terms of organization and dynamics, as well as the failure of the microtubule-dependent neuronal processes, as axonal transport, may play a pivotal role in the chain of events leading to Parkinson's disease. Last but not least, since disease-modifying or neuroprotective strategies are a clinical priority in Parkinson's disease, we will also present the hints about the concrete possibility of a microtubule-targeted therapy, which would have the potentiality to block the running degenerative events and to prompt the regeneration of the lost tissues.

3D Mass Spectrometry Imaging Reveals a Very Heterogeneous Drug Distribution in Tumors.

Mass Spectrometry Imaging (MSI) is a widespread technique used to qualitatively describe in two dimensions the distribution of endogenous or exogenous compounds within tissue sections. Absolute quantification of drugs using MSI is a recent challenge that just in the last years has started to be addressed. Starting from a two dimensional MSI protocol, we developed a three-dimensional pipeline to study drug penetration in tumors and to develop a new drug quantification method by MALDI MSI. Paclitaxel distribution and concentration in different tumors were measured in a 3D model of Malignant Pleural Mesothelioma (MPM), which is known to be a very heterogeneous neoplasm, highly resistant to different drugs. The 3D computational reconstruction allows an accurate description of tumor PTX penetration, adding information about the heterogeneity of tumor drug distribution due to the complex microenvironment. The use of an internal standard, homogenously sprayed on tissue slices, ensures quantitative results that are similar to those obtained using HPLC. The 3D model gives important information about the drug concentration in different tumor sub-volumes and shows that the great part of each tumor is not reached by the drug, suggesting the concept of pseudo-resistance as a further explanation for ineffective therapies and tumors relapse.

On the role of hydrophobic Si-based protective coatings in limiting mortar deterioration.

In order to avoid both natural and artificial stone decay, mainly due to the interaction with atmospheric pollutants (both gases such as NOx and SO2 and particulate matter), polymeric materials have been widely studied as protective coatings enable to limit the penetration of fluids into the bulk material. In the current work, an air hardening calcic lime mortar (ALM) and a natural hydraulic lime mortar (HLM) were used as substrates, and commercially available Si-based resins (Alpha®SI30 and Silres®BS16) were adopted as protective agents to give hydrophobicity features to the artificial stones. Surface properties of coatings and their performance as hydrophobic agents were studied using different techniques such as contact angle measurements, capillary absorption test, mercury intrusion porosimetry, surface free energy, colorimetric measurements and water vapour permeability tests. Finally, some exposure tests to UV radiation and to real polluted atmospheric environments (a city centre and an urban background site) were carried out during a wintertime period (when the concentrations of the main atmospheric pollutants are higher) in order to study the durability of the coating systems applied. The effectiveness of the two commercial resins in reducing salt formation (sulphate and nitrate), induced by the interaction of the mortars with the atmospheric pollutants, was demonstrated in the case of the HLM mortar. Graphical Abstract ᅟ.

Hazardous o-toluidine mineralization by photocatalytic bismuth doped ZnO slurries.

Photocatalytic mineralization of o-toluidine in aqueous media under UV/solar irradiation was achieved by bare and bismuth doped zinc oxide nanoparticles. By adopting different analytical approaches a reaction mechanism is proposed, explaining the differences in photodetoxification performances.

Wettability of bare and fluorinated silanes: a combined approach based on surface free energy evaluations and dipole moment calculations.

The assessment of the surface free energy (SFE) of a material permits to control and predict a large number of physicochemical properties of a solid surface and its reactivity. Here, the surface energies of a series of bare and fluorinated silanes are determined by means of different semi-empirical models on the grounds of contact angle determinations for different solvents. Literature data are also considered in order to produce a series of films with increasing SFE. Wetting envelopes (WE) are obtained for the various surfaces in order to predict the wettability of the films by numerous commonly employed solvents. The polar and disperse components of the surface energies are obtained by the Owens-Wendt-Rabel-Kaelbe (OWRK) method; the values of the polar components are compared with gas-phase dipole moments obtained by theoretical calculations employing semi-empirical Hamiltonians. The sequences of the polar components of the SFE and of the calculated dipole moments for the different molecules are strictly the same. The interplay between theoretical and experimental approaches proves efficient in predicting the behavior of different systems and it could be employed in tuning the SFE of a solid surface with respect to its final applications.

Tailored TiO2 layers for the photocatalytic ozonation of cumylphenol, a refractory pollutant exerting hormonal activity.

Photocatalytic ozonation by Al-supported TiO(2) films is successfully applied to the mineralization of 4-cumylphenol, a recalcitrant endocrine disrupting compound. A possible reaction mechanism implying the intermediate formation of bisphenols is proposed on the grounds of HPLC-MS and FTIR analyses.

Photocatalytic degradation of toluene in the gas phase: relationship between surface species and catalyst features.

Photocatalytic activity of both commercial and homemade samples was tested for the degradation of toluene in the gas phase by using two different irradiation sources, UV and solar. The role played by humidity in affecting the final toluene degradation was discussed. Catalyst deactivation (due to the high toluene level, 1000 ppm) and subsequent regeneration, by washing with water, were analyzed. Highest degradations and corresponding kinetic constants were achieved in the case of the anatase/brookite composite samples, while the commercial ones (including P25 Degussa) showed lower efficiency. Various adsorbed aromatic species (benzoic acid, the major surface product hydroquinone, benzylic alcohol, benzaldehyde, and cresols) obtained by washing the exhaust catalysts were analyzed by HPLC. Parallel results were achieved by Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy. The presence of different photodegradation surface species for the various photocatalysts suggests the occurrence of different reaction pathways, depending on the fine physicochemical features of the specific TiO2 adopted in the reaction.

Microtubule assembly is directly affected by MPP(+)in vitro.

The microtubular system is emerging as a cell target in neurodegeneration evoked by the Parkinsonism-inducing neurotoxin N-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) and its toxic metabolite N-methyl-4-phenylpyridinium (MPP(+)). Looking for a direct effect of the neurotoxin on microtubules, we have undertaken an in vitro study by using microtubule protein purified from bovine brain. We show that MPP(+), but not MPTP, modifies the initial rate and the critical concentration of assembly without affecting microtubule ultrastructure. These findings strengthen the hypothesis for the role of microtubules in the transduction of MPP(+)neurotoxic effect and, probably, in neuronal cell death.

Influence of MPP+ on the state of tubulin polymerisation in NGF-differentiated PC12 cells.

Cytoskeletal proteins have been reported as constituents of cytoplasmic inclusions typical of degenerated neurones in Parkinson's disease and, in addition, the involvement of cytoskeleton in the mechanism of action of the parkinsonism-producing neurotoxin MPP+ is emerging. Here we investigate the influence of MPP+ on the dynamic behaviour of microtubules. Neurone-like cells derived from a rat pheochromocytoma cell line (PC12) and differentiated with nerve growth factor are used as a model system. We found that sublethal doses of the neurotoxin markedly affect the state of tubulin polymerisation: polymerised tubulins significantly decreased, whereas an increase of unpolymerised alpha-tubulin was observed. Since the concentration of unassembled tubulin directly regulates tubulin synthesis by a feedback mechanism, we studied alpha- and beta-tubulin synthesis by metabolic labelling of PC12 cells with [35S] methionine and following immunoprecipitations. The results showed the significant decrease of labelling in both the microtubule subunits in cells exposed to the neurotoxin. We suggest that the MPP+-induced imbalance of tubulin polymerisation and synthesis represents a novel early step in the mechanism of action of the neurotoxin.

Randomized, crossover, controlled comparison of oral loading versus intravenous infusion of propafenone in recent-onset atrial fibrillation.

A population of 123 patients with recent-onset (< 72 hours) atrial fibrillation (AF) without heart failure was randomly treated with propafenone (PFN) intravenously (i.v.) (2 mg/kg bolus followed by 0.0078 mg/kg/min infusion) or in a single oral dose (o.s.) (600 mg), or with placebo (PLA) (phase 1). If AF persisted 8 hours later, patients on active drugs received the alternative formulation (crossover), and patients receiving PLA remained on PLA (phase 2). A 24-hour Holter monitoring was performed and conversion to sinus rhythm (SR) at 1, 4, and 8 hours of each phase was used as the criterion of efficacy. Conversion to SR occurred within 1 hour in 48% of patients with i.v.-PFN, 15% with o.s.-PFN, and in 17% with PLA (both P < 0.05 vs i.v.-PFN). Oral PFN was superior to PLA at 4 hours (71% vs 33%, P = 0.001) and 8 hours (78% vs 48%, P < 0.01), and 1 at 8 hours also superior to i.v.-PFN (53%, P < 0.03). The mean conversion time within 4 hours was shorter with i.v.-PFN (25 +/- 15') than with o.s.-PFN (167 +/- 166', P < 0.001) or with PLA (156 +/- 107', P < 0.001). The rates of conversion to SR with i.v.-PFN after o.s.-PFN failure were comparable to PLA at any observation time, whereas nonresponders to i.v.-PFN who received o.s.-PFN had significantly higher conversion rates than with placebo at both 4 hours (65% vs 19%) and 8 hours (76% vs 24%; both P < 0.045). Neither serious adverse effects nor episodes of regular tachycardia with 1:1 AV conduction were noted. PFN administered intravenously or in a single oral loading dose was safe and efficacious in converting recent-onset AF to SR. The rates of conversion were different with different routes of administration: i.v.-PFN was superior to o.s.-PFN over a short observation period, while the overall efficacy of o.s.-PFN was superior at 8 hours.

The dipyridyls paraquat and diquat attenuate the interaction of G-actin with thymosin beta4.

Beta-thymosins sequester G-actin and preserve a pool of monomers of actin which constitute an important prerequisite for cellular function of the microfilament system. To study the influence of paraquat binding to G-actin on the interaction of G-actin with thymosin beta4 we determined the apparent dissociation constant of the G-actin-thymosin beta4 complex in the absence or presence of paraquat using an ultrafiltration assay. Paraquat (1,1'-dimethyl-4,4'-dipyridylium dichloride) attenuates this interaction in a concentration- and time-dependent manner. When exposed to 10 mM paraquat, the apparent dissociation constant increased 10-85-fold within 15 min to 24 h. After incubation for 24 h even a paraquat concentration as low as 100 microM increased the dissociation constant of the G-actin-thymosin beta4 complex from 0.66 microM to 0.82 microM (P < 0.05). Diquat (1,1'-ethylene-2,2'-dipyridylium dibromide) similarly weakens the interaction of G-actin and beta-thymosins. In none of the experiments was oxidation of the methionine residue or any other modification of thymosin beta4 detected. Therefore we conclude that the dipyridyls paraquat and diquat directly interact with G-actin and thereby impede the interaction between G-actin and thymosin beta4.