RESUMO
The European methodology for plastics, as a feature of the EU's circular economy activity plan, ought to support the decrease in plastic waste. The improvement of recycled plastics' economics and quality is one important part of this action plan. Additionally, achieving the requirement that all plastic packaging sold in the EU by 2030 be recyclable or reusable is an important objective. This means that food packaging materials should be recycled in a closed loop at the end. One of the most significant engineering polymers is polyethylene terephthalate (PET), which is widely used. Due to its numerous crucial qualities, it has a wide variety of applications, from packaging to fibers. The thermoplastic polyolefin, primarily polyethylene and polypropylene (PP), is a popular choice utilized globally in a wide range of applications. In the first phase of the current experiment, the materials were obtained by hot pressing with the press machine. The reinforcer is made of Al nanopowder 800 nm and Fe nanopowder 790 nm and the quality of the recycled polymer was examined using Fourier transform infrared spectroscopy (FTIR), a scanning electron microscope (SEM), and differential scanning calorimetry (DSC). From DSC variation curves as a function of temperature, the values from the transformation processes (glass transition, crystallization, and melting) are obtained. SEM measurements revealed that the polymer composites with Al have smooth spherical particles while the ones with Fe have bigger rough spherical particles.
RESUMO
In this paper, the obtaining and characterization of five experimental models of novel polymer composite materials with ferrite nano-powder are presented. The composites were obtained by mechanically mixing two components and pressing the obtained mixture on a hot plate press. The ferrite powders were obtained by an innovative economic co-precipitation route. The characterization of these composites consisted of physical and thermal properties: hydrostatic density, scanning electron microscopy (SEM), and TG DSC thermal analyses, along with functional electromagnetic tests in order to demonstrate the functionality of these materials as electromagnetic shields (magnetic permeability, dielectric characteristics, and shielding effectiveness). The purpose of this work was to obtain a flexible composite material, applicable to any type of architecture for the electrical and automotive industry, necessary for protection against electromagnetic interference. The results demonstrated the efficiency of such materials at lower frequencies, but also in the microwave domain, with higher thermal stability and lifetime.
RESUMO
The purpose of this work was to obtain an elastic composite material from polymer powders (polyurethane and polypropylene) with the addition of BaTiO3 until 35% with tailored dielectric and piezoelectric features. The filament extruded from the composite material was very elastic but had good features to be used for 3D printing applications. It was technically demonstrated that the 3D thermal deposition of composite filament with 35% BaTiO3 was a convenient process for achieving tailored architectures to be used as devices with functionality as piezoelectric sensors. Finally, the functionality of such 3D printable flexible piezoelectric devices with energy harvesting features was demonstrated, which can be used in various biomedical devices (as wearable electronics or intelligent prosthesis), generating enough energy to make such devices completely autonomous only by exploiting body movements at variable low frequencies.
