Impact of bone density and integrated screw configuration on standalone anterior lumbar interbody construct strength.

Background: In anterior lumbar interbody fusion (ALIF), the use of integrated screws is attractive to surgeons because of the ease of implantation and no additional profile. However, the number and length of screws necessary for safe and stable implantation in various bone densities is not yet fully understood. The current study aims to determine how important both length and number of screws are for stability of ALIFs. Methods: Three bone models with densities of 10, 15, and 20 pounds per cubic foot (PCF) were chosen as surrogates. These were instrumented using the Z-Link lumbar interbody system with either 2, 3, or 4 integrated 4.5 × 20 mm screws or 4.5 × 25 mm screws (Zavation, LLC, Flowood, MS). The bone surrogates were tested with loading conditions resulting in spine extension to measure construct stiffness and peak force. Results: The failure load of the construct was influenced by the length of screws (p=.01) and density of the bone surrogate (p<.01). There was no difference in failure load between using 2 screws and 3 screws (p=.32) or when using four 20 mm screws versus three 25 mm screws (p=.295). Conclusion: In our study, both bone density and length of screws significantly affected the construct's load to failure. In certain cases where a greater number of screws are unable to be implanted, the same stability can potentially be conferred with use of longer screws. Future clinical studies should be performed to test these biomechanical results.

Patient Characteristics, Injury Types, and Costs Associated with Secondary Over-Triage of Isolated Cervical Spine Fractures.

STUDY DESIGN: Retrospective cohort. OBJECTIVE: To aim of this study was to identify patient variables, injury characteristics, and costs associated with operative and non-operative treatment following inter-facility transfer of patients with isolated cervical spine fractures. SUMMARY OF BACKGROUND DATA: Patients with isolated cervical spine fractures are subject to inter-facility transfer for surgical assessment, yet are often treated nonoperatively. The American College of Surgeons' benchmark rate of "secondary over-triage" is <50%. Identifying patient and injury characteristics as well as costs associated with treatment following transfer of patients with isolated cervical spine fractures may help reduce rates of secondary over-triage and healthcare expenditures. METHODS: Patients transferred to a Level-1 trauma center with isolated cervical spine fractures between January 2015 and September 2020 were identified. Patient demographics, comorbidities, insurance data, injury characteristics, imaging workup, treatment, and financial data were collected for all patients. Multivariable logistic regression models were constructed to identify patient and injury characteristics associated with surgical treatment. RESULTS: Nearly 75% of patients were treated non-operatively. Over 97% of transfers were accepted by the general surgery trauma service. Multivariable modeling found that higher BMI, presence of any neurologic deficit including spinal cord or isolated spinal nerve root injuries, present smoking status, or cervical spine magnetic resonance imaging obtained post-transfer, were associated with surgical treatment for isolated cervical spine fractures. Among patients with type II dens fractures, increased fracture displacement was associated with surgical treatment. Median charges to patients treated operatively and nonoperatively were $380,890 and $90,734, respectively. Median hospital expenditures for patients treated operatively and nonoperatively were $55,115 and $12,131, respectively. CONCLUSION: A large proportion of patients with isolated cervical spine fractures are subject to over-triage. Injury characteristics are important for determining need for surgical treatment, and therefore interfacility transfer. Improving communication with spine surgeons when deciding to transfer patients may significantly reduce health care costs and resource use.Level of Evidence: 4.

Correction to: Ultrasound localization of lacerated flexor tendon ends in the hand: a cadaveric study.

In the results section of the abstract, it states "99.0% (n = 05/96 tendons)" when it should state "99.0% (n = 95/96 tendons)".

Ultrasound localization of lacerated flexor tendon ends in the hand: a cadaveric study.

OBJECTIVE: Flexor tendon repair currently requires extensive exposure to locate and repair tendons. Ultrasound (US) has been used to identify lacerated tendon ends with little information on accuracy. This study was designed to measure the accuracy of US to localize tendon ends in zone II flexor tendon lacerations in a cadaveric model. MATERIALS AND METHODS: US was used to locate tendon ends in zone II lacerations of fingers of six cadaveric hands (96 tendon ends) by a musculoskeletal radiologist. The distance of each tendon end relative to the laceration was recorded. Specimens were dissected and tendon position was compared to US position. RESULTS: The radiologist correctly identified full-thickness lacerations of both superficial and deep tendons 99.0% (n = 05/96 tendons) of the time. The average difference between mean US predicted retraction and anatomic confirmed retraction for all digits all tendons was 3.5 mm of underestimation. US correctly identified the position of all tendon stumps to within 10 mm 92.7% (n = 89/96 tendons) of the time and 69.8% (n = 67/96 tendons) of the time to within 5 mm. Error tended to underestimate (61.5%; 59/96 tendons) rather than overestimate retraction (29.2%; 28/96 tendons). CONCLUSIONS: This fresh cadaveric study has demonstrated that with an experienced radiologist, there was 99.0% accuracy identifying a completed tendon tear and locating the tendon ends with US to within 1 cm was 92.7% accurate.

Cost and Complications of Percutaneous Fixation of Hand Fractures in a Procedure Room Versus the Operating Room.

BACKGROUND: The purpose of this study was to compare closed reduction and percutaneous pinning of metacarpal and phalanx fractures performed in the operating room (OR) versus the procedure room of the emergency department with primary outcomes being infection rate, radiographic union, and monetary cost. METHODS: From January 2006 to December 2010, all closed reduction and percutaneous pinnings of metacarpal and phalanx fractures (CPT codes: 26608; 26727) by a single board-certified hand surgeon (A.M.H.) were retrospectively reviewed. Patients were placed into 2 groups: Group 1 was patients treated in the OR, and group 2 was patients in an emergency department procedure room. Infection, malunion, and nonunion rates were compared using a chi-square test. Charges were compared using a t-test, and cost of supplies and labor was evaluated. RESULTS: A total of 189 patients met final inclusion criteria for this study: 130 in group 1 and 59 in group 2. There was no statistically significant difference in infection rates ( P = .13), nonunion ( P = .40), malunion rates ( P = .89), and hardware failure with revision ( P = .94) between the 2 groups. The procedure room patients had an average hospital charge of $1358.55 compared with $3691.85 for OR-treated patients (P = .001). The total cost of supplies and nonphysician labor was $432.31 per OR case and $179.59 per procedure room case. CONCLUSIONS: Metacarpal and phalanx fractures of the hand amendable to closed reduction and percutaneous pinning can be treated in the procedure room with no increase in risk of infection, malunion, or nonunion rates. In addition, these surgeries can be performed in a procedure room with lower cost and less charges to patients than in the operating room.

The association between medial malleolar fracture geometry, injury mechanism, and syndesmotic disruption.

BACKGROUND: Precise correlations between medial malleolar fracture geometry and fracture mechanism have not been thoroughly described. This study sought to determine the prevalence of different medial malleolar fracture types and to elucidate the association between fracture geometry and fracture mechanism. METHODS: The records of 112 medial malleolar ankle fractures were reviewed. For each fracture, the direction of the fracture line in the medial malleolus (transverse, oblique, vertical, or comminuted), the Lauge-Hansen classification, and the presence or absence of syndesmotic injury was recorded. Bivariate correlation analysis was performed to determine if correlations existed. RESULTS: Transverse fractures were the most prevalent type of medial malleolar fracture [n=64 (57%)], and they correlated with supination-external rotation injuries. These were followed by oblique fractures [29 (26)], which correlated with pronation-external rotation injuries [29 (26)], and vertical fractures [7 (6)], which correlated with supination-adduction injuries [9 (8)]. Comminuted fractures [12 (11)] and pronation-abduction injuries [22 (20)] did not correlate with any other categories. Syndesmotic injuries were correlated with transverse fractures, bimalleolar fractures, and pronation-external rotation injuries. CONCLUSION: Medial malleolar fractures can be divided into four fracture types: transverse fractures, which correlated with supination-external rotation injuries; oblique fractures, which correlated with pronation-external rotation injuries; vertical fractures, which correlated with supination-adduction injuries; and comminuted fractures, which did not correlate with a particular type of injury. Syndesmotic injury was positively correlated with transverse fractures of the medial malleolus, bimalleolar fractures, and pronation-external rotation injuries. These findings suggest that medial malleolar fracture geometry can provide valuable information for the clinician when classifying and managing ankle fractures.

Challenge of managing distal femur fractures with long-stemmed total knee implants.

OBJECTIVE: Treatment of distal femur fractures by long-stemmed total knee arthroplasty (TKA) is challenging, because of poor bone stock, decreased blood supply, history of multiple knee surgeries and an absence of standard treatment. Few published studies are available concerning this. The purpose of this study was to share surgical technique and better describe our patients' comorbidities, which add to the challenge of managing individuals with these fractures. METHODS: Between August 2008 and September 2013, seven patients presented to our level I trauma center with distal femoral fractures associated with long-stemmed TKA implants. Their average age was 68.71 years (range, 52-81 years).The most common mechanism of injury was fall (five patients), followed by a traumatic fracture of the femur while walking (one patient), and being lifted out of bed (the one nonambulatory patient). This retrospective study reports a treatment protocol, including surgical technique, and short-term outcome in seven patients in whom locking compression plates (LCP) were used. RESULTS: Six fractures were classified as Rorabeck type II, and one as type III. The average time to full-weight-bearing was 5.5 months. At this institution, good short-term results have been achieved by using an LCP with screws placed proximal to the long-stem and distal to the fracture. The six patients all achieved full-weight-bearing,taking an average of 5.5 months (range, 3-7 months). CONCLUSIONS: LCP is an effective form of management of distal femur fractures around long stem TKAs. An individualized operative approach possibly incorporating bone-graft substitutes, cerclage wire and a post-operative bone stimulator is recommended.

Interprosthetic femoral fractures treated with locking plate.

PURPOSE: Interprosthetic fractures are challenging to manage. Although treatment of femoral fractures around a single implant has been described, there is little literature for treatment of interprosthetic femoral fractures. This study analyses the management and outcomes of 15 patients with interprosthetic femoral fractures treated with locking plates. METHODS: A retrospective chart review was conducted of 17 patients with interprosthetic femur fracture treated with locking plates from 2002 to 2013. Patient demographics and comorbidities were collected. Preoperatively, patients were classified with the Vancouver or Su classification system. Intraoperative use of bone graft and/or cerclage cables was also examined. Clinical and radiographic outcomes were evaluated for union, time to full weight bearing, return to preinjury level of activity, and pain assessed with visual analog scale (VAS). RESULTS: There were 15 patients with interprosthetic fractures meeting criteria for this study. Average patient age was 80.53 (range, 61-92) years. Bone grafting was used in 23.5% (four of 17) and cerclage cables in 29.4% (five of 17). Patients achieved complete union and return to full weight bearing an average of 4.02 (range, two to six) months later. Average VAS pain score was 1.00 (range, zero to six). All patients returned to their preoperative ambulatory status. CONCLUSION: Locking plates could achieve satisfactory results for interprosthetic fractures. Considering an individual's fracture type, bone quality and protheses to determine the appropriate plate length and optional use of cerclage and/or bone graft was essential. In this limited sample size, interprosthetic fractures occurred at similar rates at the supracondylar region and diaphysis.

Staged treatment of proximal tibial fracture using external locking compression plate.

OBJECTIVE: To share our preliminary clinical success and failure with using an external locking compression plate (LCP) for proximal tibial fractures, further refine the indications for this procedure and review relevant published reports. METHODS: The current study reports two cases of proximal tibial fracture treated with external LCP as the second stage of a two-stage treatment. One patient was a 59-year-old man with a closed proximal tibial/fibular fracture caused by falling on ice while getting out of his car, and another patient was a 42-year-old male smoker with right comminuted proximal tibia, tibial plateau and proximal fibular fractures. The outcomes were evaluated by radiographs and weight bearing status. RESULTS: In the first case, the fracture healed uneventfully whereas the second case required further open-reduction with internal fixation because correct alignment could not be achieved with an external LCP. CONCLUSION: Correct alignment of proximal tibial fractures followed by use of an external LCP can achieve favorable outcomes.

Comparison of surgical techniques of 111 medial malleolar fractures classified by fracture geometry.

BACKGROUND: Evaluation of operative techniques used for medial malleolar fractures by classifying fracture geometry has not been well documented. METHODS: One hundred eleven patients with medial malleolar fractures (transverse n = 63, oblique n = 29, vertical n = 7, comminuted n = 12) were included in this study. Seventy-two patients had complicating comorbidities. All patients were treated with buttress plate, lag screw, tension band, or K-wire fixation. Treatment outcomes were evaluated on the basis of radiological outcome (union, malunion, delayed union, or nonunion), need for operative revision, presence of postoperative complications, and AOFAS Ankle-Hindfoot score. RESULTS: For transverse fractures, tension band fixation showed the highest rate of union (79%), highest average AOFAS score (86), lowest revision rate (5%), and lowest complication rate (16%). For oblique fractures, lag screws showed the highest rate of union (71%), highest average AOFAS score (80), lowest revision rate (19%), and lowest complication rate (33%) of the commonly used fixation techniques. For vertical fractures, buttress plating was used in every case but 1, achieving union (whether normal or delayed) in all cases with an average AOFAS score of 84, no revisions, and a 17% complication rate. Comminuted fractures had relatively poor outcomes regardless of fixation method. CONCLUSIONS: The results of this study suggest that both tension bands and lag screws result in similar rates of union for transverse fractures of the medial malleolus, but that tension band constructs are associated with less need for revision surgery and fewer complications. In addition, our data demonstrate that oblique fractures were most effectively treated with lag screws and that vertical fractures attained superior outcomes with buttress plating. LEVEL OF EVIDENCE: Level III, retrospective comparative series.