RESUMO
In this work, the passivation and localized corrosion of selective laser melted (SLM) stainless steel 316 L when exposed to high pressures of CO2 with the presence of H2S and Cl- at 25 °C and 125 °C were studied. Depletion of Cr/Mo was observed at the cell interiors and melt-pool boundaries (MPBs) compared to the cell boundaries. Volta potential differences obtained from scanning Kelvin probe force microscopy (SKPFM) showed that the MPBs were 8-20 mV lower than the matrix, while the cell interiors were 20-50 mV lower than the cell boundaries. Electrochemical impedance spectroscopy (EIS) and Mott-Schottky tests indicated a more defective passive film at 125 °C, and X-ray photoelectron spectroscopy (XPS) confirmed the formation of a less protective film with an increased S/O ratio at 125 °C than 25 °C. Initiation of localized corrosion was observed at the MPBs and pits formed after a week of immersion were wider by an order of magnitude at 125 °C than 25 °C, with evidence of cell-interior dissolution. While passivity was observed even at elevated temperatures, local chemical heterogeneities compromised the stability of the film and contributed to localized corrosion in SLM SS316L.
RESUMO
Currently, permanent vascular stents are fabricated using titanium and stainless steel implants that are nondegradable and offer high stability, but they have certain disadvantages. For example, the prolonged exposition of aggressive ions in the physiological media and the existence of defects in the oxide film create conditions for corrosion to occur, thus triggering unwanted biological events and compromising the mechanical integrity of the implants. Moreover, when the implant does not need to be permanent, there is the need to submit the patient for a second surgery for implant removal. As a solution for nonpermanent implants, biodegradable magnesium alloys have been deemed a promising substitute, for example, for cardiovascular-related applications and the construction of orthopedic devices. A biodegradable magnesium alloy (Mg-2.5Zn) reinforced by zinc and eggshell was employed in this study as an environment-conscious magnesium (eco) composite (Mg-2.5Zn-xES). Disintegrated melt deposition (DMD) was used to fabricate the composite. Experimental studies were conducted to investigate the biodegradation performance of Mg-Zn alloys containing 3 and 7 wt % eggshell (ES) in simulated body fluid (SBF) at 37 °C. Different corrosion techniques were used to study the corrosion behavior of the Mg-2.5Zn-xES composites, including weight loss measurements, hydrogen evolution, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and scanning vibrating electrode technique (SVET). Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) were employed to scrutinize the corroded surfaces' morphology and composition. The outcomes indicated that Mg-2.5Zn-3ES possesses the lowest degradation activity.
