Start-up of an aerobic granular sludge system from stored granules: Evaluating the impact of storage period on biomass activity and stability and the effect of temperature on nitrification and phosphorus removal rates.

Aerobic granular sludge (AGS) has been considered a breakthrough within the wastewater treatment sector. However, the long reactor start-up for the formation of granules is challenging and may hinder the spread of this technology. To circumvent this obstacle, inoculation of the reactors with pre-formed granules from existing plants is an interesting approach. In this context, issues related to biomass storage becomes very relevant. In this study, reactivation of aerobic granular biomass after storage was evaluated in a sequencing batch reactor (SBR) designed for achieving simultaneous organic matter, nitrogen and phosphorus removal. Two different scenarios, short (40 days) and long (180 days) storage periods, were assessed, and their influence on the granules physical properties and bioactivity was addressed. The results revealed that the granules stored for a shorter period showed higher resistance to breakage and underwent smooth color changes. On the other hand, the biomass stored for a longer period acquired a dark color and was more susceptible to disruption during reactivation. The granules stored for 6 months become swollen and exhibited an irregular morphology and fluffy structure within the first days of reactivation. Consequently, their settling properties were adversely affected, and some parameters such as the food-to-microorganism ratio had to be adjusted to prevent granules disintegration. Regarding the bioactivity of important microbial functional groups, COD removal was rapidly restored within a few days of SBR operation with the biomass stored for a shorter period. However, it took longer for the biomass stored for 180 days to reach the same performance observed for the granules stored for 40 days. A similar trend is valid for nitrification. In the experiments with sludge stored for a longer time, it took almost twice as long to reach effluent ammonium concentrations lower than 1 mg NH4+-N L-1 compared to the test using biomass stored for 40 days. Phosphate removal was strongly affected by biomass storage, especially after 180 days of inactivity, a condition found to be detrimental for polyphosphate-accumulating organisms. Finally, cycle tests were also conducted to assess substrate conversion rates for comparison between different trials and evaluate the influence of temperature (10-35 °C) on nitrification and phosphate removal rates.

Synthesis of hydroxypropyl methacrylate/polysaccharide graft copolymers as matrices for controlled release tablets.

Hydrophilic matrices are an interesting option when developing drug delivery systems. With this aim, hydroxypropyl methacrylate was grafted onto hydroxypropyl starch and hydroxypropyl cellulose substrates by following the Ce(IV) redox initiation method. Different amounts of ethyleneglycol' dimethacrylate, 7 and 34 mol%, as the crosslinking monomer, were also added. The drying of grafted products was carried out by lyophilization, obtaining white powders. Reaction yields (percent grafting, grafting efficiency, etc.) and some physical characteristics of the powders (particle size, moisture uptake, density, morphology, etc.) were determined. These parameters indicate how useful these products may be as potential matrices for direct compressed tablets. In this light, the powder flowability and the binding properties of each copolymer were determined. The graft copolymers can be considered of great interest as direct compression excipients. Due to their different chemical structure and composition, they showed differences in viscoelastic properties that revealed an interesting range of possibilities for use in drug delivery formulations. Tablets formulated with conventional excipients were also tested. Dissolution tests of various tablets were carried out. In 12 hr, 60-80% of the model drugs was released.

A comparison of the X-ray single-crystal structure of Li3SbO4 with the Rietveld refinement.

The X-ray single-crystal structure of trilithium antimony tetraoxide, Li(3)SbO(4), is compared with the Rietveld refinement previously reported for the same material. An analysis of the geometric parameters and s.u.'s extracted from both refinements shows that, as expected, powder data yield a less accurate structure. Nevertheless, both refinements give correct geometric parameters within s.u.'s characteristic of each technique.

Identification of phosphotyrosine in yeast proteins and of a protein tyrosine kinase associated with the plasma membrane.

[32P]Phosphotyrosine was detected in a hydrolysate of yeast proteins after in vivo labeling with [32P]phosphoric acid. The phosphoamino acid was present in cells exponentially growing on glucose as well as in cells that had reached the stationary phase of growth. Also, a plasma membrane preparation was shown to phosphorylate casein on tyrosine residues.