Green synthesis of MIL53(Al)-modified paper-based analytical device for efficient extraction of neonicotinoid insecticides from environmental water samples.

BACKGROUND: There is a need to develop low-cost, reliable and portable devices to enhance the efficiency of microextraction techniques in complex samples. Metal-organic frameworks (MOFs) have proven to be promising sorbents due to their well-documented properties. However, their green preparation and combination with paper-based substrates have not been satisfactorily explored to fabricate sustainable sorptive phases. RESULTS: In this work, the hybridization of a paper substrate (as a sustainable support) with MOFs (as a sorptive phase) was carried out by one-pot approach. Concretely, the selected MOF, MIL-53(Al), was in-situ growth onto the paper surface in aqueous solution without the need for high temperature or pressure, thereby aligning with the Green Analytical Chemistry principles. The optimized composite (MIL-53(Al)@cellulose paper) was characterized and evaluated as extraction sorbent for five neonicotinoids (NEOs) (thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid). Furthermore, its feasibility was demonstrated by isolating these pollutants from environmental water samples, followed their determination by HPLC coupled to diode array detection. The whole method showed satisfactory analytical performance with recoveries between 86 and 114 %, suitable precision (with RSD lower than 14 %), and limits of detection ranged from 1.0 to 1.6 µg L-1. Besides, the greenness of the method was assessed by application of different existing metrics. The developed extraction device was affordable (<0.08 €/device) and mechanical and chemically stable, being possible its reuse more than 11 cycles, thus demonstrating its suitability for rapid screening of pesticides in environmental samples. SIGNIFICANCE: This report presents, for the first time, the green synthesis of MIL-53(Al)cellulose paper composite and its application as a sorptive phase for the extraction of NEOs from environmental water samples. We believe that the proposed strategy for fabricating these sustainable paper-based sorptive phases paves the way for further hybridizations with other MOFs or materials. Additionally, it opens up large possibilities for their application in extraction of pollutants or other hazardous compounds in aquatic environments.

Aptamer-functionalized stir bar sorptive extraction for selective isolation, identification, and determination of concanavalin A in food by MALDI-TOF-MS.

An aptamer-functionalized stir bar sorptive extraction (SBSE) coating is described for the first time devoted to selective isolation and preconcentration of an allergenic food protein, concavanalin A (Con A), followed by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF-MS) determination. For this purpose, the polytetrafluoroethylene surface of commercial magnetic stir bars was properly modified and vinylized to immobilize a thiol-modified aptamer against Con A via straightforward "thiol-ene" click chemistry. The aptamer-functionalized stir bar was employed as SBSE sorbent to isolate Con A, and several parameters that can affect the extraction efficiency were investigated. Under the optimized conditions, Con A was extracted and desorbed during 30 and 45 min, respectively, at 25 °C and 600 rpm. The SBSE MALDI-TOF-MS method provided limits of detection of 0.5 µg mL-1 for Con A. Furthermore, the SBSE coating was highly selective to Con A compared to other lectins. The developed method was successfully applied to the determination of low levels of Con A in several food matrices (i.e., white beans as well as chickpea, lentils, and wheat flours). Recoveries ranged from 81 to 97% with relative standard deviations below 7%. The aptamer-based stir bars presented suitable physical and chemical long-term stability (1 month) and a reusability of 10 and 5 extraction cycles with standards and food extracts, respectively. The developed aptamer-affinity extraction devices open up the possibility of developing novel highly selective SBSE coatings for the extraction of proteins and peptides from complex samples.

Weak anion-exchange mixed-mode materials to selectively extract acidic compounds by stir bar sorptive extraction from environmental waters.

In this study, the first example of a polytetrafluoroethylene (PTFE)-based magnet coated with weak anion exchange (WAX) monolith as novel support for stir bar sorptive extraction (SBSE) is presented. Firstly, the PTFE magnets were properly modified and vinylized in order to immobilize polymer monoliths onto its surface. Then, a glycidyl methacrylate monolith was prepared and modified with ethylenediamine (EDA) to create weak anion exchanger via ring opening reaction of epoxy groups. The prepared covalently immobilized EDA-modified monoliths onto PTFE magnet exhibited good stability and reusability. Application of resulting material as stir bar for SBSE was investigated for a series of acidic compounds that includes acesulfame, saccharin, diclofenac or ibuprofen, among others as target compounds. Firstly, the SBSE conditions were optimized to promote the WAX interactions with the target compounds achieving recoveries from 37 to 75% and enable the selective extraction of these compounds as it provided values of% matrix effect from 17 to -13% when they were determined by SBSE followed by liquid chromatography - tandem mass spectrometry. The analytical methodology, was then validated and applied for the determination of the target solutes in environmental water samples, which were found at concentration up to 2500 ng L-1 in river waters.

Preparation of monolithic polymer-magnetite nanoparticle composites into poly(ethylene-co-tetrafluoroethylene) tubes for uses in micro-bore HPLC separation and extraction of phosphorylated compounds.

This paper describes the fabrication of a novel microbore monolithic column modified with magnetite nanoparticles (MNPs) prepared in a poly(ethylene-co-tetrafluoroethylene) (EFTE) tubing, and its application as stationary phase for the chromatographic separation of phosphorylated compounds. In order to obtain the composite column, a two-step procedure was performed. The formation of a glycidyl methacrylate-based monolith inside the activated ETFE tube was firstly carried out. Then, two incorporation approaches of MNPs in monoliths were investigated. The generic polymer was modified with 3-aminopropyltrimethoxysilane (APTMS) to be subsequently attached to MNP surfaces. Alternatively, APTMS-coated MNPs were firstly prepared and subsequently used for attachment onto the monolith surface through reaction of epoxy groups present in the generic monolith. This last strategy gave a reproducible layer of MNPs coated onto the polymer monolith as well as robust and permeable chromatographic columns. The retention behaviour of this MNP-based composite monolithic column was studied by using small phosphorylated compounds (adenosine phosphates). It was found that the retention of model analytes was ruled by partitioning and adsorption HILIC mechanisms. The columns also exhibited satisfactory performance in the separation of these target compounds, showing good chromatographic behaviour after two months of continued use. These composite monolithic columns were also successfully applied to the extraction of a tryptic digest of ß-casein.

Determination of benzomercaptans in environmental complex samples by combining zeolitic imidazolate framework-8-based solid-phase extraction and high-performance liquid chromatography with UV detection.

In this work, the synthesis of zeolitic imidazolate framework-8 (ZIF-8) crystals and their subsequent application as effective sorbents for extraction and preconcentration of several benzomercaptans from environmental complex samples is described. These materials were prepared by solvothermal approach varying the concentration of n-butylamine modulator to modify the surface of the metal-organic framework. The resulting materials were characterized by scanning and transmission electron microscopy, powder X-ray diffraction and Fourier transform infrared spectroscopy. The ZIF-8 material that gave the best features was selected as extractive phase and the influence of various parameters (sample pH and elution solvent composition, among others) on the extraction efficiency of target compounds were investigated. Under the optimal conditions of the method, the tested analytes (2-mercaptobenzothiazole, 2-mercaptobenzoxazole and 2-mercapto-6-nitrobenzothiazole) were retained and eluted quantitatively with alkaline 50:50 (v:v) methanol-water mixture. Using the proposed method, low limits of detection, in the range of 16-21 ng L-1 for aqueous samples and 0.4-0.5 µg kg-1 for soil samples, were achieved whereas the precision (expressed as relative standard deviation) was lower than 7%. The resulting solid-phase extraction protocol, using the zeolitic material as sorbent, was combined with liquid chromatography and ultraviolet-vis detector and successfully applied to determine traces of these organic pollutants in environmental samples.

Extraction and preconcentration of organophosphorus pesticides in water by using a polymethacrylate-based sorbent modified with magnetic nanoparticles.

A polymethacrylate-based sorbent modified with magnetic nanoparticles (MNPs) has been synthesized and used as sorbent for solid-phase extraction (SPE) and magnetic solid-phase extraction (MSPE) of three organophosphorus pesticides (phosmet, pirimiphos-methyl, and chlorpyrifos) in water samples followed by high-performance liquid chromatography-diode array detection. The sorbent was prepared from a glycidyl methacrylate-based polymer, modified with a silanizing agent, followed by immobilization of MNPs on the surface of the material. The sorbent was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Comparative studies of this support were done both in conventional SPE cartridge and MSPE approach. Several extraction parameters (loading pH, elution solvent, eluting volume, and loading flow rate) were investigated in detail. Under optimal conditions, the proposed sorbent gave an excellent enrichment efficiency of analytes and detection limits between 0.01 and 0.25 µg L-1. The recoveries of organophosphorus pesticides in spiked water samples were in the range of 71-98%, and the developed sorbent showed a high reusability (up to 50 uses without losses in recovery). The proposed method was satisfactorily applied to the analysis of these pesticides in water samples from different sources.

Determination of azoxystrobin and chlorothalonil using a methacrylate-based polymer modified with gold nanoparticles as solid-phase extraction sorbent.

This paper describes a novel and sensitive method for extraction, preconcentration, and determination of two important widely used fungicides, azoxystrobin, and chlorothalonil. The developed methodology is based on solid-phase extraction (SPE) using a polymeric material functionalized with gold nanoparticles (AuNPs) as sorbent followed by high-performance liquid chromatography (HPLC) with diode array detector (DAD). Several experimental variables that affect the extraction efficiency such as the eluent volume, sample flow rate, and salt addition were optimized. Under the optimal conditions, the sorbent provided satisfactory enrichment efficiency for both fungicides, high selectivity and excellent reusability (>120 re-uses). The proposed method allowed the detection of 0.05 µg L-1 of the fungicides and gave satisfactory recoveries (75-95 %) when it was applied to drinking and environmental water samples (river, well, tap, irrigation, spring, and sea waters).

Selective and Sensitive Chemiluminescence Determination of MCPB: Flow Injection and Liquid Chromatography.

Two new chemiluminescence (CL) methods are described for the determination of the herbicide 4-(4-chloro-o-tolyloxy) butyric acid (MCPB). First, a flow injection chemiluminescence (FI-CL) method is proposed. In this method, MCPB is photodegraded with an ultraviolet (UV) lamp and the photoproducts formed provide a great CL signal when they react with ferricyanide in basic medium. Second, a high-performance liquid chromatography chemiluminescence (HPLC-CL) method is proposed. In this method, before the photodegradation and CL reaction, the MCPB and other phenoxyacid herbicides are separated in a C18 column. The experimental conditions for the FI-CL and HPLC-CL methods are optimized. Both methods present good sensitivity, the detection limits being 0.12 µg L(-1) and 0.1 µg L(-1) (for FI-CL and HPLC-CL, respectively) when solid phase extraction (SPE) is applied. Intra- and interday relative standard deviations are below 9.9%. The methods have been satisfactorily applied to the analysis of natural water samples. FI-CL method can be employed for the determination of MCPB in simple water samples and for the screening of complex water samples in a fast, economic, and simple way. The HPLC-CL method is more selective, and allows samples that have not been resolved with the FI-CL method to be solved.

Development of a Photoinduced Chemiluminescent Method for the Determination of the Herbicide Quinmerac in Water.

A new, simple, and sensitive method, based on photoinduced chemiluminescence, was developed for the determination of quinmerac. The photoproduct, obtained after ultraviolet irradiation in basic medium, was mixed with sodium sulfite (sensitizer), and Ce(IV) (oxidant) in acid medium. A wide linear dynamic range (2-600 ng mL(-1)) and a limit of detection of 0.6 ng mL(-1) were obtained without any pretreatment (0.08 ng mL(-1) after solid-phase extraction). The determination was performed using a flow-injection manifold, which allowed a high throughput (144 h(-1)). The interday reproducibility was 5.6% (n = 5), and the intraday repeatability was 3.9 and 2.9% for 20 and 200 ng mL(-1) of quinmerac, respectively (n = 21). Finally, the method was applied to surface water and groundwater, with recoveries ranging from 78.1 to 94.5%.

Fast determination of thiacloprid by photoinduced chemiluminescence.

A new and sensitive application of chemiluminescence detection has been developed for the determination of the pesticide thiacloprid in water. It was based on the on-line photoreaction of thiacloprid in a basic medium, with quinine acting as the sensitizer of the chemiluminescent response; cerium (IV) in sulfuric acid medium was used as the oxidant. High degrees of automation and reproducibility were achieved using a flow-injection analysis (FIA) manifold. The validation of the method was performed in terms of selectivity, linearity, limit of detection (LOD), precision, and accuracy. Liquid chromatography with ultraviolet (UV) detection was used as reference for mineral, tap, ground, and spring water samples. The proposed method is fast (with a throughput of 130 h(-1)), sensitive (LOD of 0.8 ng mL(-1) without preconcentration steps and of 0.08 ng mL(-1) with solid-phase extraction [SPE]), low cost, and possible to couple with separation methods for the simultaneous determination of other pesticides. The enhanced chemiluminescence intensity was linear with the thiacloprid concentration above the 2-80 and 80-800 ng mL(-1) ranges. A possible reaction mechanism is also discussed.

Determination of organothiophosphorus pesticides in water by liquid chromatography and post-column chemiluminescence with cerium(IV).

A new, fast, selective and sensitive method has been developed for the simultaneous determination of nine organothiophosphorus (OTP) pesticides, namely omethoate, dimethoate, disulfoton-sulfoxide, methidathion, phosmet, malathion, diazinon, pirimiphos-methyl and chlorpyrifos. The pesticides were separated on a Kinetex C18 column by gradient elution with acetonitrile:water. A post-column basic hydrolysis of the pesticides and later a chemiluminescence (CL) reaction with cerium (IV) in acid medium was carried out. Hexadecylpyridinium chloride highly enhanced the CL emission. Under optimized conditions, linearity, precision, limits of detection and quantification, and accuracy were determined. Both selectivity and sensitivity were compared with those obtained with UV detection. In combination with SPE, limits of detection in the range 15-80ng/L and 5-30ng/L were obtained when 250mL and 1000mL of solution were treated, respectively. When applied to 250mL of sample the inter-day precision of the method was between 3.5% and 7.3% and the intra-day precision between 2.9% and 6.0%. The method was applied to determine OTP pesticides in spiked water samples from different origins: irrigation, river, sea, ground, spring, mineral and tap waters, being the percentage of recovery of added amounts near 100% form most of the pesticides.

FI-photoinduced chemiluminescence method for diuron determination in water samples.

A new method for the determination of the herbicide diuron, using a flow injection manifold and photoinduced chemiluminescence detection, is presented. The pesticide, in basic medium, was irradiated on-line with UV light (254 nm) for 53 s. A short discussion about the possible irradiation products is included. The chemiluminescent response of the photoproducts was induced by oxidation with potassium ferricyanide in phosphate buffer at pH 11.5. The method permitted the quantification of diuron over the 0.1-4.0 mg L(-1) range, with a detection limit (S/N = 3) of 20 µg L(-1) when the method was applied directly. However, the use of solid phase extraction (SPE) performed with C(18) cartridges allowed us to achieve a limit of detection of 0.4 µg L(-1) and a 1.5-30 µg L(-1) dynamic range. The method was successfully applied to the diuron determination in samples of water from different sources (spring, ground, mineral, irrigation, sea and tap waters) with a low consumption of reagents.