Enhanced solute transport and steady mechanical stimulation in a novel dynamic perifusion bioreactor increase the efficiency of the in vitro culture of ovarian cortical tissue strips.

Introduction: We report the development and preliminary evaluation of a novel dynamic bioreactor to culture ovarian cortical tissue strips that leverages tissue response to enhanced oxygen transport and adequate mechanical stimulation. In vitro multistep ovarian tissue static culture followed by mature oocyte generation, fertilization, and embryo transfer promises to use the reserve of dormant follicles. Unfortunately, static in vitro culture of ovarian tissue does not promote development of primordial to secondary follicles or sustain follicle viability and thereby limits the number of obtainable mature oocytes. Enhancing oxygen transport to and exerting mechanical stimulation on ovarian tissue in a dynamic bioreactor may more closely mimic the physiological microenvironment and thus promote follicle activation, development, and viability. Materials and Methods: The most transport-effective dynamic bioreactor design was modified using 3D models of medium and oxygen transport to maximize strip perifusion and apply tissue fluid dynamic shear stresses and direct compressive strains to elicit tissue response. Prototypes of the final bioreactor design were manufactured with materials of varying cytocompatibility and assessed by testing the effect of leachables on sperm motility. Effectiveness of the bioreactor culture was characterized against static controls by culturing fresh bovine ovarian tissue strips for 7 days at 4.8 × 10-5 m/s medium filtration flux in air at -15% maximal total compressive strain and by assessing follicle development, health, and viability. Results and Conclusions: Culture in dynamic bioreactors promoted effective oxygen transport to tissues and stimulated tissues with strains and fluid dynamic shear stresses that, although non-uniform, significantly influenced tissue metabolism. Tissue strip culture in bioreactors made of cytocompatible polypropylene preserved follicle viability and promoted follicle development better than static culture, less so in bioreactors made of cytotoxic ABS-like resin.

Dynamic in vitro culture of bovine and human ovarian tissue enhances follicle progression and health.

In vitro ovarian cortical tissue culture, followed by culture of isolated secondary follicles, is a promising future option for production of mature oocytes. Although efforts have been made to improve the culture outcome by changing the medium composition, so far, most studies used static culture systems. Here we describe the outcome of 7 days cultures of bovine and human ovarian cortical tissue in a dynamic system using a novel perifusion bioreactor in comparison to static culture in conventional and/or gas permeable dishes. Findings show that dynamic culture significantly improves follicle quality and viability, percentage and health of secondary follicles, overall tissue health, and steroid secretion in both species. Model predictions suggest that such amelioration can be mediated by an enhanced oxygen availability and/or by fluid-mechanical shear stresses and solid compressive strains exerted on the tissue.

Kinetic Analysis of Lidocaine Elimination by Pig Liver Cells Cultured in 3D Multi-Compartment Hollow Fiber Membrane Network Perfusion Bioreactors.

Liver cells cultured in 3D bioreactors is an interesting option for temporary extracorporeal liver support in the treatment of acute liver failure and for animal models for preclinical drug screening. Bioreactor capacity to eliminate drugs is generally used for assessing cell metabolic competence in different bioreactors or to scale-up bioreactor design and performance for clinical or preclinical applications. However, drug adsorption and physical transport often disguise the intrinsic drug biotransformation kinetics and cell metabolic state. In this study, we characterized the intrinsic kinetics of lidocaine elimination and adsorption by porcine liver cells cultured in 3D four-compartment hollow fiber membrane network perfusion bioreactors. Models of lidocaine transport and biotransformation were used to extract intrinsic kinetic information from response to lidocaine bolus of bioreactor versus adhesion cultures. Different from 2D adhesion cultures, cells in the bioreactors are organized in liver-like aggregates. Adsorption on bioreactor constituents significantly affected lidocaine elimination and was effectively accounted for in kinetic analysis. Lidocaine elimination and cellular monoethylglicinexylidide biotransformation featured first-order kinetics with near-to-in vivo cell-specific capacity that was retained for times suitable for clinical assist and drug screening. Different from 2D cultures, cells in the 3D bioreactors challenged with lidocaine were exposed to close-to-physiological lidocaine and monoethylglicinexylidide concentration profiles. Kinetic analysis suggests bioreactor technology feasibility for preclinical drug screening and patient assist and that drug adsorption should be accounted for to assess cell state in different cultures and when laboratory bioreactor design and performance is scaled-up to clinical use or toxicological drug screening.

Dynamic Characterization of the Biomechanical Behaviour of Bovine Ovarian Cortical Tissue and Its Short-Term Effect on Ovarian Tissue and Follicles.

The ovary is a dynamic mechanoresponsive organ. In vitro, tissue biomechanics was reported to affect follicle activation mainly through the Hippo pathway. Only recently, ovary responsiveness to mechanical signals was exploited for reproductive purposes. Unfortunately, poor characterization of ovarian cortex biomechanics and of the mechanical challenge hampers reproducible and effective treatments, and prevention of tissue damages. In this study the biomechanical response of ovarian cortical tissue from abattoir bovines was characterized for the first time. Ovarian cortical tissue fragments were subjected to uniaxial dynamic testing at frequencies up to 30 Hz, and at increasing average stresses. Tissue structure prior to and after testing was characterized by histology, with established fixation and staining protocols, to assess follicle quality and stage. Tissue properties largely varied with the donor. Bovine ovarian cortical tissue consistently exhibited a nonlinear viscoelastic behavior, with dominant elastic characteristics, in the low range of other reproductive tissues, and significant creep. Strain rate was independent of the applied stress. Histological analysis prior to and after mechanical tests showed that the short-term dynamic mechanical test used for the study did not cause significant tissue tear, nor follicle expulsion or cell damage.

Validation of a novel 3D flow model for the optimization of construct perfusion in radial-flow packed-bed bioreactors (rPBBs) for long-bone tissue engineering.

Osteogenic cell culture in three-dimensional (3D) hollow cylindrical porous scaffolds in radial-flow packed-bed bioreactors (rPBBs) may overcome the transport limitations of static and axial perfusion bioreactors in the engineering of long-bone substitutes. Flow models of rPBBs help optimize radial flux distribution of medium and tissue maturation in vitro. Only a 2D model is available for steady flow transport in rPBBs with axisymmetric inlet and outlet accounting for the fluid dynamics of void spaces, assessed against literature information. Here, a novel 3D model is proposed for steady flow transport in the three compartments of rPBBs with a more practical lateral outlet. A 3D model of transient tracer transport was developed based on the flow model to predict bioreactor residence time distribution (RTD). Model-predicted flow patterns were validated in terms of RTD against tracer experiments performed with bioreactor prototypes equipped with commercial scaffolds for bone tissue engineering. Bioreactors were challenged with a step change in entering tracer concentration in an optimized set-up under conditions promoting uniform radial flux distribution and typical shunt flows. Model-predicted RTDs agreed well with those experimentally determined. In conclusion, tracer experiments validate the use of the 3D flow model for optimizing construct perfusion in rPBBs to engineer long-bone substitutes.

The Maximal Pore Size of Hydrophobic Microporous Membranes Does Not Fully Characterize the Resistance to Plasma Breakthrough of Membrane Devices for Extracorporeal Blood Oxygenation.

Extracorporeal membrane oxygenation (ECMO) in blood-outside devices equipped with hydrophobic membranes has become routine treatment of respiratory or cardiac failure. In spite of membrane hydrophobicity, significant amounts of plasma water may form in the gas compartment during treatment, an event termed plasma water breakthrough. When this occurs, plasma water occludes some gas pathways and ultimately cripples the oxygenator gas exchange capacity requiring its substitution. This causes patient hemodilution and increases the activation of the patient's immune system. On these grounds, the resistance to plasma water breakthrough is regarded as an important feature of ECMO devices. Many possible events may explain the occurrence of plasma breakthrough. In spite of this, the resistance to plasma breakthrough of ECMO devices is commercially characterized only with respect to the membrane maximal pore size, evaluated by the bubble pressure method or by SEM analysis of membrane surfaces. The discrepancy between the complexity of the events causing plasma breakthrough in ECMO devices (hence determining their resistance to plasma breakthrough), and that claimed commercially has caused legal suits on the occasion of the purchase of large stocks of ECMO devices by large hospitals or regional institutions. The main aim of this study was to identify some factors that contribute to determining the resistance to plasma breakthrough of ECMO devices, as a means to minimize litigations triggered by an improper definition of the requirements of a clinically efficient ECMO device. The results obtained show that: membrane resistance to breakthrough should be related to the size of the pores inside the membrane wall rather than at its surface; membranes with similar nominal maximal pore size may exhibit pores with significantly different size distribution; membrane pore size distribution rather than the maximal pore size determines membrane resistance to breakthrough; the presence of surfactants in the patient's blood (e.g., lipids, alcohol, etc.) may significantly modify the intrinsic membrane resistance to breakthrough, more so the higher the surfactant concentration. We conclude that the requirements of ECMO devices in terms of resistance to plasma breakthrough ought to account for all these factors and not rely only on membrane maximal pore size.

Slush nitrogen vitrification of human ovarian tissue does not alter gene expression and improves follicle health and progression in long-term in vitro culture.

OBJECTIVE: To study whether slush nitrogen (SN) vs. liquid nitrogen (LN) vitrification affects human ovarian tissue gene expression and preserves follicle health during extended in vitro culture. DESIGN: Randomized experimental study. SETTING: University research laboratory. PATIENT(S): Ovarian biopsies collected by laparoscopic surgery from patients with benign gynaecologic conditions. INTERVENTION(S): None. MAIN OUTCOME MEASURE(S): Ovarian strips were vitrified with LN or SN, warmed, and analyzed before or after culture for 9 days (d9) in gas-permeable dishes. Expression of genes involved in stress and toxicity pathways was analyzed in fresh and warmed strips by polymerase chain reaction (PCR) array and quantitative real-time-PCR. Fresh and vitrified/warmed strips were analyzed for follicle quality, progression, and viability before or after culture. RESULT(S): The SN vitrification preserved follicle quality better than LN (% grade 1 follicles: fresh control, 54.2; LN, 29.3; SN, 48.8). Quantitative reverse transcription-PCR demonstrated a noticeable up-regulation of 13 genes in LN samples (range, 10-35) and a markedly lower up-regulation of only 5 genes (range, 3.6-7.8) in SN samples. Long-term in vitro culture evidenced worse follicle quality and viability in LN samples than in both fresh and SN samples (% grade 1 follicle: fresh d0, 51.5; fresh d9, 41; LN d9, 16.4; SN d9, 55) and a highly significant reduction of primordial follicles and a concomitant increase of primary and secondary follicles in all samples. Follicle growth to the secondary stage was significantly higher in vitrified tissue than in fresh tissue, being better in SN than in LN vitrified tissue. CONCLUSION(S): Follicle quality, gene expression, viability, and progression are better preserved after SN vitrification.

Development of a Device-Assisted Nerve-Regeneration Procedure in Disruptive Lesions of the Brachial Plexus.

BACKGROUND: We describe the development of a new surgical procedure to be used in the treatment of disruptive brachial plexus (BP) lesions. It is centered on an artificial device designed to assist nerve regeneration by providing a confined and protected environment. Nerve fibers can repair inside the device, while the adverse massive scar-tissue formation is limited to the outside of the device. METHODS: Steps in the development of the procedure were (1) definition of the rationale, (2) design of the device, (3) choice of an in vivo translational model, (4)refinement of the surgical procedure, and (5) performance of an in vivo pilot study as a proof of concept. An interdisciplinary team from several laboratories was involved in this work over a period of 6 years. RESULTS: Results showed the absence of significant scar tissue in the regenerate and the presence of myelinated fibers aligned proximodistally between the stumps. This surgical approach can be seen not only as a definitive treatment but also as an early examination and stabilization before some different surgery will be later performed. It may also be used as additional protection for traditional surgery like end-to-end coaptation. CONCLUSIONS: We conclude that the availability of a suitable device-assisted early treatment, even if not to be considered definitive, could help in addressing the BP lesions at an earlier stage and this may improve the final outcome. Our evidence justifies further experimentation on this approach.

Is oxygen availability a limiting factor for in vitro folliculogenesis?

Transplantation of ovarian tissue for the preservation of fertility in oncological patients is becoming an accepted clinical practice. However, the risk of re-introducing tumour cells at transplantation has stirred an increased interest for complete in vitro folliculogenesis. This has not yet been achieved in humans possibly for the lack of knowledge on the environmental milieu that orchestrates folliculogenesis in vivo. The main aim of this study was to investigate the effect of oxygen availability on follicle health and growth during in vitro culture of ovarian tissue strips. To this end, a model was developed to predict the dissolved oxygen concentration in tissue under varying culture conditions. Ovarian cortical strips of bovine, adopted as an animal model, and human tissue were cultured in conventional (CD) and gas permeable (PD) dishes under different media column heights and gaseous oxygen tensions for 3, 6 and 9 days. Follicle quality, activation of primordial follicles to the primary stage, and progression to the secondary stage were analysed through histology. Follicle viability was assessed through a live-dead assay at the confocal scanning laser microscope. Findings showed a higher follicle quality and viability after culture of bovine ovarian strips in PD in adequate medium height and oxygen tensions. The best culture conditions found in the bovine were adopted for human ovarian strip culture and promoted a higher follicle quality, viability and progression. Overall, data demonstrated that modulation of oxygen availability in tissue plays a key role in maintaining follicles' health and their ability to survive and progress to the secondary stage during ovarian tissue in vitro culture. Such culture conditions could increase the yield of healthy secondary follicles for subsequent dissection and individual culture to obtain competent oocytes.

Renal function replacement by hemodialysis: forty-year anniversary and a glimpse into the future at hand.

From its introduction in 1943 and until the late 1970s, hemodialysis (HD) has been a lengthy and cumbersome treatment administered by a few skilled physicians and technicians to a very limited number of terminal kidney patients. The technological innovations introduced over the years made HD a treatment administered and supervised by nursing personnel to a very large numbers of kidney patients, hopefully until recovery of kidney functions or kidney transplantation. In 2013, it is estimated that 2.250.00 kidney patients were treated worldwide, and their number is steadily increasing. Shortage of transplant kidneys and quality of current treatments has contributed to increasing the survival of HD patients. Today, it is not unusual to find patients who have been on HD for longer than twenty years. All this generated the feeling that performance of membranes and dialysis technology has reached its limit. Recently, the increasing economic burden of healthcare caused by people ageing and the increasing incidence of degenerative diseases (e.g. diabetes and cardiovascular diseases), and the economic crisis has pushed many governments and health insurances to cut resources for healthcare. The main consequence is that investments in research and development in HD have been significantly reduced. The question is whether there is indeed no need for innovation in HD.In this paper, it is discussed how the paradigm of HD has changed and what possibly are now the drivers for innovation in HD. A few ideas are proposed that could be developed by adapting existing technologies to the future needs of HD.

Bone structural similarity score: a multiparametric tool to match properties of biomimetic bone substitutes with their target tissues.

BACKGROUND: One of the hardest tasks in developing or selecting grafts for bone substitution surgery or tissue engineering is to match the structural and mechanical properties of tissue at the recipient site, because of the large variability of tissue properties with anatomical site, sex, age and health conditions of the patient undergoing implantation. We investigated the feasibility of defining a quantitative bone structural similarity score based on differences in the structural properties of synthetic grafts and bone tissue. METHODS: Two biocompatible hydroxyapatite porous scaffolds with different nominal pore sizes were compared with trabecular bone tissues from equine humerus and femur. Images of samples' structures were acquired by high-resolution micro-computed tomography and analyzed to estimate porosity, pore size distribution and interconnectivity, specific surface area, connectivity density and degree of anisotropy. Young's modulus and stress at break were measured by compression tests. Structural similarity distances between sample pairs were defined based on scaled and weighted differences of the measured properties. Their feasibility was investigated for scoring structural similarity between considered scaffolds or bone tissues. RESULTS: Manhattan distances and Quadrance generally showed sound and consistent similarities between sample pairs, more clearly than simple statistical comparison and with discriminating capacity similar to image-based scores to assess progression of pathologies affecting bone structure. CONCLUSIONS: The results suggest that a quantitative and objective bone structural similarity score may be defined to help biomaterials scientists fabricate, and surgeons select, the graft or scaffold best mimicking the structure of a given bone tissue.

Science versus design; comparable, contrastive or conducive?

Science and design are two completely separated areas of expertise with their own specialists. Science analyses the existing world to create new knowledge, design uses existing knowledge to create a new world. This tunnel-vision mentality and narrow-minded approach is dangerous for problem solving, where a broad view on potential solutions is required to realise a high-quality answer on the defined problem. We state that design benefits from scientific methods, resulting in a more effective design process and in better products, while science benefits from a design approach, resulting in more efficient and effective results. Our philosophy is illustrated using examples from the field of biomedical engineering. Both methods can benefit tremendously from each other. By applying scientific methods, superior choices will be made in the design process. With design, more accurate, effective and efficient science will be performed.

Perfusion enhances solute transfer into the shell of hollow fiber membrane bioreactors for bone tissue engineering.

Preparation of tissue engineered (TE) 3D constructs to repair large bone defects is limited by the difficult supply of nutrients and oxygen to cells in the innermost regions of constructs cultured in bioreactors. Poor oxygenation negatively affects cell viability and function. Bioreactor design optimization may help relieve these limitations. Bioreactors in which cells are cultured outside bundles of hollow fiber membranes (HFMBs) are structurally similar to natural bone. HFMB operation in pure diffusion has been reported to suffice for fibroblasts, but is deemed insufficient for bone cells. In this paper, the effect of perfusion flows in the cell compartment on solute transfer was investigated in HFMBs differing in design and operating conditions. HFMBs were designed and operated using values of non-dimensional groups that ensured solutes transfer towards the cell compartment mainly by diffusion; in the presence of low to high Starling flows; in the presence of pulsatile radial flows obtained by periodically stopping the solution flow leaving the bioreactor using a pinch valve. Distribution of matter in cell-free HFMBs was evaluated with tracer experiments in an optimized apparatus. Effectiveness of solute transfer to cell compartment was assessed based on the bioreactor response in terms of the shell volume actively involved in mass transfer (V(MTA)) according to transport models developed specifically for the purpose. V(MTA) increased with increasing Starling flows. In the pulsatile radial flow mode, tracer concentration in the shell increased 3 times faster than at high Starling flows. This suggests that controlled perfusion flows in HFMBs might enable the engineering of large TE bone constructs.

Feasibility of using sodium chloride as a tracer for the characterization of the distribution of matter in complex multi-compartment 3D bioreactors for stem cell culture.

The experimental characterization of the distribution of matter in complex multi-compartment three-dimensional membrane bioreactors for human cell culture is complicated by tracer interactions with the membranes and other bioreactor constituents. This is due to the fact that membranes with a high specific surface area often feature a hydrophobic chemical backbone that may adsorb tracers often used to this purpose, such as proteins and dyes. Membrane selectivity, and its worsening caused by protein adsorption, may also hinder tracer transfer across neighboring compartments, thus preventing effective characterization of the distribution of matter in the whole bioreactor. Tracer experiments with sodium chloride (NaCl) may overcome some of these limitations and be effectively used to characterize the distribution of matter in complex 3D multi-compartments membrane bioreactors for stem cell culture. NaCl freely permeates most used membranes, it does not adsorb on uncharged membranes, and its concentration may be accurately measured in terms of solution conductivity. In this preliminary study, the feasibility of complex multi-compartment membrane bioreactors was investigated with a NaCl concentration pulse challenge to characterize how their distribution of matter changes when they are operated under different conditions. In particular, bioreactors consisting of three different membrane types stacked on top of one another to form a 3D network were characterized under different feed conditions.