On-Chip Fabrication of Colloidal Suprastructures by Assembly and Supramolecular Interlinking of Microgels.

In this report, a versatile method is demonstrated to create colloidal suprastructures by assembly and supramolecular interlinking of microgels using droplet-based microfluidics. The behavior of the microgels is systematically investigated to evaluate the influence of their concentration on their distribution between the continuous, the droplet phase, and the interface. At low concentrations, microgels are mainly localized at the water-oil interface whereas an excess of microgels results, following the complete coverage of the water-oil interface, in their distribution in the continuous phase. To stabilize the colloidal suprastructure, on-chip gelation is introduced by adding natural polyphenol tannic acid (TA) in the water phase. TA forms interparticle linking between the poly(N-vinylcaprolactam) (PVCL) microgels by supramolecular interactions. The combination of supramolecular interlinking with the variation of the microgel concentration in microfluidic droplets enables on-chip fabrication of defined colloidal suprastructures with morphologies ranging from colloidosomes to colloidal supraballs. The obtained supracolloidal structures exhibit a pH-responsive behavior with a disintegration at alkaline conditions within a scale of seconds. The destabilization process results from the deprotonation of phenolic groups and destruction of hydrogen bonds with PVCL chains at higher pH.

Varying the Stiffness and Diffusivity of Rod-Shaped Microgels Independently through Their Molecular Building Blocks.

Microgels are water-swollen, crosslinked polymers that are widely used as colloidal building blocks in scaffold materials for tissue engineering and regenerative medicine. Microgels can be controlled in their stiffness, degree of swelling, and mesh size depending on their polymer architecture, crosslink density, and fabrication method-all of which influence their function and interaction with the environment. Currently, there is a lack of understanding of how the polymer composition influences the internal structure of soft microgels and how this morphology affects specific biomedical applications. In this report, we systematically vary the architecture and molar mass of polyethylene glycol-acrylate (PEG-Ac) precursors, as well as their concentration and combination, to gain insight in the different parameters that affect the internal structure of rod-shaped microgels. We characterize the mechanical properties and diffusivity, as well as the conversion of acrylate groups during photopolymerization, in both bulk hydrogels and microgels produced from the PEG-Ac precursors. Furthermore, we investigate cell-microgel interaction, and we observe improved cell spreading on microgels with more accessible RGD peptide and with a stiffness in a range of 20 kPa to 50 kPa lead to better cell growth.

Microgels as Platforms for Antibody-Mediated Cytokine Scavenging.

Therapeutic antibodies are the key treatment option for various cytokine-mediated diseases, such as rheumatoid arthritis, psoriasis, and inflammatory bowel disease. However, systemic injection of these antibodies can cause side effects and suppress the immune system. Moreover, clearance of therapeutic antibodies from the blood is limiting their efficacy. Here, water-swollen microgels are produced with a size of 25 µm using droplet-based microfluidics. The microgels are functionalized with TNFα antibodies to locally scavenge the pro-inflammatory cytokine TNFα. Homogeneous distribution of TNFα-antibodies is shown throughout the microgel network and demonstrates specific antibody-antigen binding using confocal microscopy and FLIM-FRET measurements. Due to the large internal accessibility of the microgel network, its capacity to bind TNFα is extremely high. At a TNFα concentration of 2.5 µg mL-1 , the microgels are able to scavenge 88% of the cytokine. Cell culture experiments reveal the therapeutic potential of these microgels by protecting HT29 colorectal adenocarcinoma cells from TNFα toxicity and resulting in a significant reduction of COX II and IL8 production of the cells. When the microgels are incubated with stimulated human macrophages, to mimic the in vivo situation of inflammatory bowel disease, the microgels scavenge almost all TNFα that is produced by the cells.

Fracture Detection in Bio-Glues with Fluorescent-Protein-Based Optical Force Probes.

Glues are being used to bond, seal, and repair in industry and biomedicine. The improvement of gluing performance is hence important for the development of new glues with better and balanced property spaces, which in turn necessitates a mechanistic understanding of their mechanical failure. Optical force probes (OFPs) allow the observation of mechanical material damage in polymers from the macro- down to the microscale, yet have never been employed in glues. Here, the development of a series of ratiometric OFPs based on fluorescent-protein-dye and protein-protein conjugates and their incorporation into genetically engineered bio-glues is reported. The OFPs are designed to efficiently modulate Förster resonance energy transfer upon force application thereby reporting on force-induced molecular alterations independent of concentration and fluorescence intensity both spectrally and through their fluorescence lifetime. By fluorescence spectroscopy in solution and in the solid state and by fluorescence lifetime imaging microscopy, stress concentrations are visualized and adhesive and cohesive failure in the fracture zone is differentiated.

Hollow, pH-Sensitive Microgels as Nanocontainers for the Encapsulation of Proteins.

Depending on their architectural and chemical design, microgels can selectively take up and release small molecules by changing the environmental properties, or capture and protect their cargo from the surrounding conditions. These outstanding properties make them promising candidates for use in biomedical applications as delivery or carrier systems. In this study, hollow anionic p(N-isopropylacrylamid-e-co-itaconic acid) microgels are synthesized and analyzed regarding their size, charge, and charge distribution. Furthermore, interactions between these microgels and the model protein cytochrome c are investigated as a function of pH. In this system, pH serves as a switch for the electrostatic interactions to alternate between no interaction, attraction, and repulsion. UV-vis spectroscopy is used to quantitatively study the encapsulation of cytochrome c and possible leakage. Additionally, fluorescence-lifetime images unravel the spatial distribution of the protein within the hollow microgels as a function of pH. These analyses show that cytochrome c mainly remains entrapped in the microgel, with pH controlling the localization of the protein - either in the microgel's cavity or in its network. This significantly differentiates these hollow microgels from microgels with similar chemical composition but without a solvent filled cavity.

Tailoring the Properties of Optical Force Probes for Polymer Mechanochemistry.

Invited for the cover of this issue are Robert Göstl and co-workers at DWI-Leibniz Institute for Interactive Materials, RWTH Aachen University and Heidelberg University. The image depicts the tailoring of optical force probes for analyzing polymer materials. Read the full text of the article at 10.1002/chem.202102938.

Tailoring the Properties of Optical Force Probes for Polymer Mechanochemistry.

The correlation of mechanical properties of polymer materials with those of their molecular constituents is the foundation for their holistic comprehension and eventually for improved material designs and syntheses. Over the last decade, optical force probes (OFPs) were developed, shedding light on various unique mechanical behaviors of materials. The properties of polymers are diverse, ranging from soft hydrogels to ultra-tough composites, from purely elastic rubbers to viscous colloidal solutions, and from transparent glasses to super black dyed coatings. Only very recently, researchers started to develop tailored OFP solutions that account for such material requirements in energy (both light and force), in time, and in their spatially detectable resolution. We here highlight notable recent examples and identify future challenges in this emergent field.

Multicolor Mechanofluorophores for the Quantitative Detection of Covalent Bond Scission in Polymers.

The fracture of polymer materials is a multiscale process starting with the scission of a single molecular bond advancing to a site of failure within the bulk. Quantifying the bonds broken during this process remains a big challenge yet would help to understand the distribution and dissipation of macroscopic mechanical energy. We here show the design and synthesis of fluorogenic molecular optical force probes (mechanofluorophores) covering the entire visible spectrum in both absorption and emission. Their dual fluorescent character allows to track non-broken and broken bonds in dissolved and bulk polymers by fluorescence spectroscopy and microscopy. Importantly, we develop an approach to determine the absolute number and relative fraction of intact and cleaved bonds with high local resolution. We anticipate that our mechanofluorophores in combination with our quantification methodology will allow to quantitatively describe fracture processes in materials ranging from soft hydrogels to high-performance polymers.

Microgel PAINT - nanoscopic polarity imaging of adaptive microgels without covalent labelling.

Polymer nanostructures have enormous potential for various applications in materials and life sciences. In order to exploit and understand their full capabilities, a detailed analysis of their structures and the environmental conditions in them is essential on the nanoscopic scale. With a super-resolution fluorescence microscopy technique known as PAINT (Points Accumulation for Imaging in Nanoscale Topography), we imaged colloidal hydrogel networks, so-called microgels, having a hydrodynamic radius smaller than the diffraction limit, gaining unprecedented insight into their full 3D structure which is not accessible in this much detail with any other experimental method. In addition to imaging of the microgel structure, the use of Nile Red as the solvatochromic fluorophore allowed us to resolve the polarity conditions within the investigated microgels, thus providing nanoscopic information on the x,y,z-position of labels including their polarity without the need of covalent labelling. With this imaging approach, we give a detailed insight into adapting structural and polarity properties of temperature-responsive microgels when changing the temperature beyond the volume phase transition.

Droplet-Assisted Microfluidic Fabrication and Characterization of Multifunctional Polysaccharide Microgels Formed by Multicomponent Reactions.

Polysaccharide-based microgels have broad applications in multi-parametric cell cultures, cell-free biotechnology, and drug delivery. Multicomponent reactions like the Passerini three-component and the Ugi four-component reaction are shown in here to be versatile platforms for fabricating these polysaccharide microgels by droplet microfluidics with a narrow size distribution. While conventional microgel formation requires pre-modification of hydrogel building blocks to introduce certain functionality, in multicomponent reactions one building block can be simply exchanged by another to introduce and extend functionality in a library-like fashion. Beyond synthesizing a range of polysaccharide-based microgels utilizing hyaluronic acid, alginate and chitosan, exemplary in-depth analysis of hyaluronic acid-based Ugi four-component gels is conducted by colloidal probe atomic force microscopy, confocal Brillouin microscopy, quantitative phase imaging, and fluorescence correlation spectroscopy to elucidate the capability of microfluidic multicomponent reactions for forming defined polysaccharide microgel networks. Particularly, the impact of crosslinker amount and length is studied. A higher network density leads to higher Young's moduli accompanied by smaller pore sizes with lower diffusion coefficients of tracer molecules in the highly homogeneous network, and vice versa. Moreover, tailored building blocks allow for crosslinking the microgels and incorporating functional groups at the same time as demonstrated for biotin-functionalized, chitosan-based microgels formed by Ugi four-component reaction. To these microgels, streptavidin-labeled enzymes are easily conjugated as shown for horseradish peroxidase (HRP), which retains its activity inside the microgels.

Mapping of surface-enhanced fluorescence on metal nanoparticles using super-resolution photoactivation localization microscopy.

Photoactivation localization microscopy (PALM) was applied to study surface-enhanced fluorescence (SEF) on metal nanostructures (SEF-PALM). The detection of fluorescence from individual single molecules can be used to image the point-spread-function and spatial distribution of the fluorescence emitted in the vicinity of a metal surface. Due to the strong scattering effect, the angular distribution of the fluorescence is altered by metals, resulting in a spatial shift of fluorescence spots with respect to the metal nanostructures, and has to be taken into account in the analysis. SEF-PALM can be used to discriminate effects of labelling density when estimating the enhancement factor in SEF. Furthermore, nanostructures with sizes below the diffraction limit can be resolved using this technique. SEF-PALM is established as a powerful tool to study plasmon-mediated phenomena on metal nanostructures.

Subdiffraction limited, remote excitation of surface enhanced Raman scattering.

We demonstrate that focused laser excitation at the end of silver nanowires of 50-150 nm diameter excites SERS hot-spots at points of nanoparticle adsorption many micrometers along the wire due to the plasmon waveguide effect. The total SERS intensity detected at the hot-spots following wire-end excitation correlates with the known wavelength, polarization, and distance dependences of surface plasmon polariton (SPP) propagation in nanowires. The SERS spectra obtained at the hot-spots following wire-end excitation show very little background compared to when excitation occurs directly at the hot-spot, suggesting that a much smaller SERS excitation volume is achieved by remote, waveguide excitation. The ability to transfer SERS excitation over several micrometers, through a structure with a subdiffraction limit diameter, is discussed with respect to potential high-resolution SERS imaging applications.

Control of surface plasmon localization via self-assembly of silver nanoparticles along silver nanowires.

A simple and low-cost method to create metal-metal hybrid nanostructures possessing fairly regularly spaced "hot-spots" of surface plasmon resonances is proposed. The nanohybrid structure was prepared via self-assembly during a simple drop-casting procedure, using chemically synthesized silver nanowires and silver nanoparticles prepared in a single batch of a polyol process. Wide field illumination of these nanohybrids produced hot-spots with spacings of around 500 nm to 1 microm. The intensity of the emission/scattering from the hot-spots fluctuates over time. The proposed structure can be useful for the development of molecular-sensors or as a substrate for surface enhanced Raman/fluorescence spectroscopy.

Selection rules of the charge transfer mechanism of surface-enhanced Raman scattering: The effect of the adsorption on the relative intensities of pyrimidine bonded to silver nanoclusters.

Surface-enhanced Raman spectra (SERS) of pyrimidine recorded on a silver electrode have been analyzed on the basis of a resonant Raman (RR) process involving photoexcited charge transfer (CT) states of the metal-adsorbate surface complex. The main feature of the SERS of benzene and azine derivatives is the enhancement of the totally symmetric ring stretching mode 8a due to Franck-Condon contributions related to the CT transition. Although this behavior is observed in the SERS of pyrimidine, its spectrum is also characterized by the strong enhancement of the nontotally symmetric mode 8b. This peculiar feature can be explained only by the redistribution of the Franck-Condon factors between the 8ab pair of vibrations originated by the descent in symmetry occurring when pyrimidine is bonded to silver nanoclusters. This conclusion is a new evidence of the main role of the RR-CT enhancement mechanism in the SERS of aromatic molecules and shows once again the usefulness of the methodology developed by our group in order to analyze these complex spectra.