Institutional health communication and social media: Exploring Italian hospitals' use of social media pages.

Introduction: Hospitals play a potentially crucial role in public health, and social media can be powerful tools to reach their target audiences but are hospitals exploiting them to their full potential? Methods: We retrieved the institutional webpages and the social media profiles (Facebook, Instagram, X (Twitter), YouTube, LinkedIn, WhatsApp and Telegram) of all Italian public hospitals located in regional capitals (N = 194). From 1 March to 30 April 2022, we analysed these profiles, noting the number of followers and of posts published, the date of the last post, and the availability of a social media policy. We selected the most active 53 social media profiles (belonging to 33 hospital facilities) for a closer content analysis. Engagement was measured through numbers of reactions, comments and shares to posts published from 1 to 30 April 2022. Results: About 36.6% of hospitals had a social media profile, and 18.3% had a social media policy. Most (87%) used Facebook as their main platform. They posted most frequently about hospital events and activities (48.3% of the socially active set). Overall, engagement was modest, as on average 0.62% of potential users reacted to a post. The same post often appeared without modifications across different platforms (82.3% of cases for Instagram, 37.8% for X (Twitter) compared to Facebook). Conclusions: Italian public hospitals did not seem to have a clear social media policy nor strategy, and social media remained underused. Italian hospitals, therefore, appeared to be missing valuable opportunities to reach out to their patients and communities.

Covid-19 vaccination during pregnancy: A mixed-methods study of attitudes in a sample of Italian women and the role of health professionals' communication.

OBJECTIVES: We examined Italian pregnant women's attitudes about the diphtheria, tetanus, and pertussis (DTP) vaccine, seasonal influenza, and Covid-19 vaccines, healthcare professionals' (HP) communication, reasons and potential predictors for non-adherence. METHODS: From August 2021 to January 2022, we carried out a cross-sectional study in Italy using an online self-administered questionnaire addressed to women of age and pregnant, designed using LimeSurvey and disseminated through social media. Questions explored vaccination attitude/perceptions, satisfaction, and trust in HPs' information. Thematic analysis of free-text responses was performed using MaxQDA 2022. Statistical analyses were performed using STATA. RESULTS: 1594 responses were obtained. 52% of women hesitated to be vaccinated against Covid-19 while pregnant. Information received by HPs was deemed incomplete by 56% of participants, unclear by 52%, and untrustworthy by 46%; 49% felt unsupported in their decision-making process. This variable was one predictor of vaccine hesitancy together with concern about vaccine safety in the multivariate model. The analysis of open-ended questions revealed a pervasive feeling of dissatisfaction. CONCLUSION: The perceived lack of adequate communication and support by HPs affected pregnant women's decision-making process on Covid-19 vaccination. PRACTICE IMPLICATIONS: HPs need to understand and communicate the importance of vaccination during pregnancy, learning to better tailor their messages.

Efficacy of a Short-Term Lifestyle Change Intervention in Healthy Young Men: The FASt Randomized Controlled Trial.

The aim of this study was to investigate the impact of dietary habits and physical activity intervention on lifestyle behavior as a prevention tool supported also by personalized motivational counseling. A two-arm randomized controlled trial was carried out. A sample of 18-22-year-old students was randomly assigned to a four-month intervention based on the Mediterranean diet and moderate physical activity program (N = 66) or to a control group (N = 63). The outcomes were adherence to the Mediterranean diet, physical activity level, and nutrients intake, assessed at enrollment (t0), end of intervention (t4, 4 months after the start), and end of follow-up (t8, 8 months after the start). Adherence to the Mediterranean diet increased from t0 to t4 and t8, more in the intervention (6.83, 9.85, and 9.12, respectively) than in the control group (6.73, 7.00, 7.69, respectively) (p < 0.001). Physical activity showed a moderate increase from t0 to t4 and t8 in both groups, without significant differences between them. Significant differences were seen between the two groups in food intake changes, from t0 to t4 and t8. This randomized controlled trial showed that a moderate short-term intervention based on the Mediterranean diet and regular physical activity determined a positive change in the lifestyle of healthy, normal-weight, young men.

Polychlorinated Biphenyls and Semen Quality in Healthy Young Men Living in a Contaminated Area.

Polychlorinated biphenyls (PCBs) are persistent organic pollutants and endocrine disruptors that have been implicated in potential damage to human semen. However, the studies conducted so far provide contrasting results. Our study aimed to investigate the associations between PCB serum and semen levels and semen quality in high school and university students living in a highly PCB-polluted area of Italy. Subjects with a normal body mass index who did not make daily use of tobacco, alcohol, drugs, or medication were selected. All participants provided a fasting blood and a semen sample. Gas chromatography-mass spectrometry was used to determine the concentrations of 26 PCB congeners. The concentrations of PCB functional groups and total PCBs were also computed. A total of 143 subjects (median age 20, range 18-22 years) were enrolled. The median total PCB concentrations were 3.85 ng/mL (range 3.43-4.56 ng/mL) and 0.29 ng/mL (range 0.26-0.32 ng/mL) in serum and semen, respectively. The analysis of the associations between sperm PCB concentration and semen parameters showed (a) negative associations between some PCB congeners, functional groups and total PCBs and sperm total motility; (b) negative associations of total PCBs with sperm normal morphology; and (c) no association of PCBs with sperm concentration. Subjects at the highest quartile of semen total PCB concentration had 19% and 23% mean reductions in total motility and normal morphology, respectively, compared to those at the lowest quartile. The analysis of the associations of serum PCB levels with sperm parameters yielded null or mixed (some positive, other negative) results. In conclusion, the present study provides evidence of a negative effect of some PCB congeners and total PCBs in semen on sperm motility and normal morphology. However, the associations between the concentration of serum and semen PCB congeners and functional groups and sperm quality parameters were inconsistent.

Comparison between Macro and Trace Element Concentrations in Human Semen and Blood Serum in Highly Polluted Areas in Italy.

Macro and trace elements are important regulators of biological processes, including those ones linked to reproduction. Among them, Ca, Cu, Fe, K, Mg, Mn, Na, Se, and Zn ensure normal spermatic functions. Hence, the aim of this study was to evaluate the concentrations of 26 macro and trace elements (Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Sb, Se, Sn, Sr, U, V, and Zn) in blood serum and also in semen of healthy young men, homogeneous for age, anthropometric characteristics, and lifestyle, living in three highly polluted areas in Italy. Furthermore, a comparison among three geographical areas was performed to highlight any difference in the investigated parameters and, overall, to speculate any correlations between chemical elements and semen quality. Statistically significant differences (p < 0.05) among the three areas were found for each investigated element, in both semen and serum samples, where inter-area differences were more evident in semen than in blood serum, suggesting human semen as an early environmental marker. Considering the homogeneity of three cohorts, these differences could be due more to environmental conditions in the recruiting areas, suggesting that variations in those involved in reproductive-associated pathways can have an impact on male fertility. Nevertheless, more research is needed to evaluate threshold values for sperm dysfunction and male infertility. Actually, the role of different dietary intake and environmental exposure underlying the observed differences in the recruiting areas is under further investigation for the same cohort.

Evaluating the Effectiveness of Internet-Based Communication for Public Health: Systematic Review.

BACKGROUND: Communicating strategically is a key issue for health organizations. Over the past decade, health care communication via social media and websites has generated a great deal of studies examining different realities of communication strategies. However, when it comes to systematic reviews, there is fragmentary evidence on this type of communication. OBJECTIVE: The aim of this systematic review was to summarize the evidence on web institutional health communication for public health authorities to evaluate possible aim-specific key points based on these existing studies. METHODS: Guided by the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement, we conducted a comprehensive review across 2 electronic databases (PubMed and Web of Science) from January 1, 2011, to October 7, 2021, searching for studies investigating institutional health communication. In total, 2 independent researchers (AN and SS) reviewed the articles for inclusion, and the assessment of methodological quality was based on the Kmet appraisal checklist. RESULTS: A total of 78 articles were selected. Most studies (35/78, 45%) targeted health promotion and disease prevention, followed by crisis communication (24/78, 31%), general health (13/78, 17%), and misinformation correction and health promotion (6/78, 8%). Engagement and message framing were the most analyzed aspects. Few studies (14/78, 18%) focused on campaign effectiveness. Only 23% (18/78) of the studies had an experimental design. The Kmet evaluation was used to distinguish studies presenting a solid structure from lacking studies. In particular, considering the 0.75-point threshold, 36% (28/78) of the studies were excluded. Studies above this threshold were used to identify a series of aim-specific and medium-specific suggestions as the communication strategies used differed greatly. CONCLUSIONS: Overall, the findings suggest that no single strategy works best in the case of web-based health care communication. The extreme variability of outcomes and the lack of a unitary measure for assessing the end points of a specific campaign or study lead us to reconsider the tools we use to evaluate the efficacy of web-based health communication.

Wastewater toxicity removal: Integrated chemical and effect-based monitoring of full-scale conventional activated sludge and membrane bioreactor plants.

The literature is currently lacking effect-based monitoring studies targeted at evaluating the performance of full-scale membrane bioreactor plants. In this research, a monitoring campaign was performed at a full-scale wastewater treatment facility with two parallel lines (traditional activated sludge and membrane bioreactor). Beside the standard parameters (COD, nitrogen, phosphorus, and metals), 6 polynuclear aromatic hydrocarbons, 29 insecticides, 2 herbicides, and 3 endocrine disrupting compounds were measured. A multi-tiered battery of bioassays complemented the investigation, targeting different toxic modes of action and employing various biological systems (uni/multicellular, prokaryotes/eukaryotes, trophic level occupation). A traffic light scoring approach was proposed to quickly visualize the impact of treatment on overall toxicity that occurred after the exposure to raw and concentrated wastewater. Analysis of the effluents of the CAS and MBR lines show very good performance of the two systems for removal of organic micropollutants and metals. The most noticeable differences between CAS and MBR occurred in the concentration of suspended solids; chemical analyses did not show major differences. On the other hand, bioassays demonstrated better performance for the MBR. Both treatment lines complied with the Italian law's "ecotoxicity standard for effluent discharge in surface water". Yet, residual biological activity was still detected, demonstrating the adequacy and sensitivity of the toxicological tools, which, by their inherent nature, allow the overall effects of complex mixtures to be taken into account.

Aerosol Jet® Printing of Poly(3,4-Ethylenedioxythiophene): Poly(Styrenesulfonate) onto Micropatterned Substrates for Neural Cells In Vitro Stimulation.

In neural tissue engineering (NTE), topographical, electrical, mechanical and/or biochemical stimulations are established methods to regulate neural cell activities in in vitro cultures. Aerosol Jet® Printing is here proposed as enabling technology to develop NTE integrated devices for electrically combined stimulations. The printability of a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT: PSS) commercial ink onto a reference substrate was firstly investigated and the effect of the process parameters on the quality of printed lines was analyzed. The study was then extended for printing thick electrodes and interconnects; the print strategy was finally transferred to a silicon-based wafer with patterned microchannels of proven cellular adhesion and topographical guidance. The results showed values of electrical resistance equal to ~16 Ω for printed electrodes which are ~33 µm thick and ~2 mm wide. The electrical impedance of the final circuit in saline solution was detected in the range of 1 - 2 kΩ at 1 kHz, which is in line with the expectations for bioelectronic neural interfaces. However, cells viability assays on the commercial PEDOT: PSS ink demonstrated a dose dependent cytotoxic behavior. The potential cause is associated with the presence of a cytotoxic co-solvent in the ink's formulation, which is released in the medium culture, even after a post-sintering process on the printed electrodes. This work is a first step to develop innovative in vitro NTE devices via a printed electronic approach. It also sheds new insights the transfer of AJ® print strategies across different substrates, and biocompatibility of commercial PEDOT: PSS inks.

Effects of a Lifestyle Change Intervention on Semen Quality in Healthy Young Men Living in Highly Polluted Areas in Italy: The FASt Randomized Controlled Trial.

BACKGROUND: Human semen quality is affected by lifestyle and environmental factors. OBJECTIVE: To evaluate the short-term effects of a diet and physical activity intervention on semen quality of healthy young men living in highly polluted areas of Italy. DESIGN, SETTING, AND PARTICIPANTS: A randomized controlled trial was conducted. Healthy young men were assigned to an intervention or a control group. INTERVENTION: A 4-mo Mediterranean diet and moderate physical activity program. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: The primary outcomes were sperm concentration, motility and morphology, concentration of round cells, and semen total antioxidant capacity. Secondary outcomes were adherence to Mediterranean diet and physical activity. All outcomes were measured twice, at the enrollment (t0) and at the end of the intervention (t4). RESULTS AND LIMITATIONS: A total of 263 individuals attended all visits, and underwent examinations and laboratory analyses: 137 in the intervention group and 126 in the control group. The adherence to Mediterranean diet and physical activity level increased more in the intervention group than in the control group from t0 to t4. Sperm concentration, total and progressive motility, and proportion of normal morphology cells increased in the intervention group but decreased in the control group, with statistically significant differences between the two groups at t4. The total antioxidant capacity increased in the intervention group but decreased in the control group, from t0 to t4. CONCLUSIONS: Study results showed that an intervention based on Mediterranean diet and regular physical activity can determine an improvement of semen quality in healthy young men. PATIENT SUMMARY: Our study aimed to evaluate the effect of a lifestyle intervention on semen quality of healthy young men. We assigned the 263 enrolled individuals to an intervention or a control group. The intervention group followed a 4-mo Mediterranean diet and moderate physical activity program, at the end of which the participants showed an improvement of semen quality parameters.

Nd:YVO4 Laser Irradiation on Cr3C2-25(Ni20Cr) Coating Realized with High Velocity Oxy-Fuel Technology-Analysis of Surface Modification.

The high-velocity oxy-fuel (HVOF) technique has been extensively used for the deposition of hard metal coatings. The main advantage of HVOF, compared to other thermal spray techniques, is its ability to accelerate the melted powder particles of the feedstock material to a relatively high velocity, leading to good adhesion and low porosity. To further improve the surface properties, a mechanical machining process is often needed; however, a key problem is that the high hardness of the coating makes the polishing process expensive (in terms of time and tool wear). Another approach to achieving surface modification is through interaction with a thermal source, such as a laser beam. In this research, the effects of laser scanning rate, scanning strategy, and number of loop cycles were investigated on an HVOF-coated surface. Cr3C2-25(Ni20Cr) was selected as the coating and Nd:YVO4 as the laser source. The results demonstrate the significance of the starting coating morphology and how the laser process parameters can be tuned to generate different types of modifications, ranging from polishing to texturing.

Additive Manufacturing for Personalized Skull Base Reconstruction in Endoscopic Transclival Surgery: A Proof-of-Concept Study.

BACKGROUND: Endoscopic transnasal transclival intradural surgery is limited by a high postoperative cerebrospinal fluid leak rate. The aim of this study was to investigate the role of three-dimensional printing to create a personalized, rigid scaffold for clival reconstruction. METHODS: Two different types of clivectomy were performed in 5 specimens with the aid of neuronavigation, and 11 clival reconstructions were simulated. They were repaired with polylactide, three-dimensional-printed scaffolds that were manually designed in a computer-aided environment based either on the real or on the predicted defect. Scaffolds were printed with a fused filament fabrication technique and different offsets. They were positioned and fixed either following the gasket seal technique or with screws. Postdissection radiological evaluation of scaffold position was performed in all cases. In 3 specimens, the cerebrospinal fluid leak pressure point was measured immediately after reconstruction. RESULTS: The production process took approximately 30 hours. The designed scaffolds were satisfactory when no offset was added. Wings were added during the design to allow for screw positioning, but broke in 30% of cases. Radiological assessment documented maximal accuracy of scaffold positioning when the scaffold was created on the real defect; accuracy was satisfactory when the predicted clivectomy was performed under neuronavigation guidance. The cerebrospinal fluid leak pressure point was significantly higher when the scaffold was fixed with screws compared with the gasket technique. CONCLUSIONS: In this preclinical setting, additive manufacturing allows the creation of customized scaffolds that are effective in reconstructing even large and geometrically complex clival defects.

Environmental Footprint of Wastewater Treatment: A Step Forward in the Use of Toxicological Tools.

The assessment of the actual impact of discharged wastewater on the whole ecosystem and, in turn, on human health requires the execution of bioassays. In effect, based on the chemical characterization alone, the synergistic/antagonistic effect of mixtures of pollutants is hardly estimable. The aim of this work was to evaluate the applicability of a battery of bioassays and to suggest a smart procedure for results representation. Two real wastewater treatment plants were submitted to analytical campaigns. Several baseline toxicity assays were conducted, together with tests for the determination of endocrine activity, genetic toxicity and carcinogenicity of wastewater. A "traffic light" model was adopted for an easy-to-understand visualization of the results. Although the legal prescriptions of chemical parameters are fully complied with, bioassays show that a certain biological activity still residues in the treated effluents. Moreover, influent and effluent responses are not always appreciably different. Some tests employing human cells were revealed to be only partially adequate for environmental applications. An interesting and helpful development of the present approach would consist in the estimation of biological equivalents of toxicity, as shown for the estrogenic compound 17-ß-estradiol.

Cancer Cell Direct Bioprinting: A Focused Review.

Three-dimensional printing technologies allow for the fabrication of complex parts with accurate geometry and less production time. When applied to biomedical applications, two different approaches, known as direct or indirect bioprinting, may be performed. The classical way is to print a support structure, the scaffold, and then culture the cells. Due to the low efficiency of this method, direct bioprinting has been proposed, with or without the use of scaffolds. Scaffolds are the most common technology to culture cells, but bioassembly of cells may be an interesting methodology to mimic the native microenvironment, the extracellular matrix, where the cells interact between themselves. The purpose of this review is to give an updated report about the materials, the bioprinting technologies, and the cells used in cancer research for breast, brain, lung, liver, reproductive, gastric, skin, and bladder associated cancers, to help the development of possible treatments to lower the mortality rates, increasing the effectiveness of guided therapies. This work introduces direct bioprinting to be considered as a key factor above the main tissue engineering technologies.

Genotoxic Activity of Particulate Matter and In Vivo Tests in Children Exposed to Air Pollution.

The aim of this paper was to investigate the relationship between micronuclei and DNA damage in children's buccal mucosa cells and the genotoxicity and mutagenicity of the different sized fractions of particulate matter as well as the concentration of PAHs (polycyclic aromatic hydrocarbons) and metals in particulate matter. Air particulate matter was collected by high volume samplers located near the schools attended by the children on the same days of biological samplings. The mutagenic activity was assessed in different cells in in vitro tests (Ames test on bacteria and comet test on leukocytes). Our study showed weak positive correlations between (a) the mutagenicity of the PM0.5 fraction and PAHs and (b) the micronuclei test of children's buccal cells and PAHs detected in PM0.5 and PM0.5-3 fractions. A positive correlation was also found between in vitro comet test on leukocytes and PAHs in the PM3-10 fraction. No correlation was observed for metal concentrations in each PM fraction.

Parents and Mobile Devices, from Theory to Practice: Comparison between Perception and Attitudes to 0-5 Year Old Children's Use.

Pediatrics associations recommend avoiding the use of mobile devices (MDs) in children aged 0-2 years and limiting them to one hour per day for children aged 3-5 years. This study aimed to explore public risk perception on MDs use by children aged 0-5 years and attitudes of parents to children's use. Participants were recruited on a voluntary basis by social media using a self-administered survey. The study included 3115 participants, most of whom were parents of children aged under 5 years (n = 1901; 61%). Most of the respondents (74%) considered that MDs use could be harmful for children's health. The awareness on a correct use did not always translate into avoiding MDs use as recommended, especially in parents of children aged 0-2 years. Half of the sample (54%) received or sought information on risks related to MDs use. The most consulted information sources were the web (78%), and pediatricians in only 22% of cases. Understanding the determinants of parents' risk perception and behavior is necessary to design effective family-based interventions in order to guide parents to a moderate and more careful use of MDs by their children. To do so, public health actions must aim to strengthen awareness about conscious use of MDs.

Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction.

The 3D printing process offers several advantages to the medical industry by producing complex and bespoke devices that accurately reproduce customized patient geometries. Despite the recent developments that strongly enhanced the dominance of additive manufacturing (AM) techniques over conventional methods, processes need to be continually optimized and controlled to obtain implants that can fulfill all the requirements of the surgical procedure and the anatomical district of interest. The best outcomes of an implant derive from optimal compromise and balance between a good interaction with the surrounding tissue through cell attachment and reduced inflammatory response mainly caused by a weak interface with the native tissue or bacteria colonization of the implant surface. For these reasons, the chemical, morphological, and mechanical properties of a device need to be designed in order to assure the best performances considering the in vivo environment components. In particular, complex 3D geometries can be produced with high dimensional accuracy but inadequate surface properties due to the layer manufacturing process that always entails the use of post-processing techniques to improve the surface quality, increasing the lead times of the whole process despite the reduction of the supply chain. The goal of this work was to provide a comparison between Ti6Al4V samples fabricated by selective laser melting (SLM) and electron beam melting (EBM) with different building directions in relation to the building plate. The results highlighted the influence of the process technique on osteoblast attachment and mineralization compared with the building orientation that showed a limited effect in promoting a proper osseointegration over a long-term period.

Comet Test in Saliva Leukocytes of Pre-School Children Exposed to Air Pollution in North Italy: The Respira Study.

Air pollution is a well-known problem for human health, especially for children living in highly polluted urban areas. This study aimed to assess the relationship between airborne pollutants concentration and biomarkers of DNA damage in the buccal mucosa cells of pre-school children. DNA damage was investigated with comet test in saliva leukocytes taken from sputum of 3- to 6-year-old children living in Brescia, Northern Italy, collected during two consecutive winter seasons (2012-2013). The daily levels of PM10, PM2.5, NO2, CO, SO2, benzene and O3 in urban air were collected for the whole period. A questionnaire filled in by the children's parents was used to evaluate indoor and outdoor exposure. DNA damage in saliva leukocytes was evaluated in 152 children and the means of tail intensity and visual score as DNA damage were 6.2 ± 4.3 and 182.1 ± 30.9, respectively. No demographic and indoor or outdoor exposure variable was associated with the two measures of DNA damage. No significant association between air pollution and DNA damage in children's buccal leukocytes was found. In this study, the comet assay does not appear to be a valuable biomarker to detect DNA damage in children exposed to high levels of air pollutants, such as PM10, PM2.5 and NO2.

Genotoxicity of source, treated and distributed water from four drinking water treatment plants supplied by surface water in Sardinia, Italy.

High levels of disinfection by-products (DBPs) are constantly found in drinking water distributed in Sardinia, an Italian island with a tourist vocation and critical issues related to the drinking water supply. To reduce the concentration of trihalomethanes the disinfectant in use was changed - chlorine dioxide was adopted instead of hypochlorite. However, this caused the appearance of other DBPs (e.g., chlorites) in water distributed to the population. Thus, the use of monochloramine as a secondary disinfectant (associated with chlorine dioxide as the primary disinfectant) was evaluated in four drinking water treatment plants supplied by artificial basins located in the central-northern part of Sardinia. Raw, disinfected and distributed waters were studied for genotoxicity using a battery of in vitro tests on different cells (bacteria, plant and mammalian cells) to detect different genetic endpoints (i.e., point and chromosome mutations and DNA damage). Moreover, a chemical and microbiological characterisation of water samples was performed. All samples of water distributed to the people showed mutagenic or genotoxic effects in different cells/organisms. In particular, chromosome aberrations in plant cells and DNA damage in human cells were observed. In this study, the use of chloramines associated with other disinfectants did not eliminate the mutagenicity present in the raw water and when the raw water was not mutagenic it introduced mutagenic/genotoxic substances. A careful management of drinking water is needed to reduce health hazards associated with the mutagenicity of drinking water.

Numerical Optimization of the Blank Dimensions in Tube Hydroforming Using Line-Search and Bisection Methods.

The change from a consolidated manufacturing practice to a new solution is often a complex problem because of the operative limits of technologies and the strict constraints of industrial parts. Moreover, the new process must reflect or enhance the characteristics of the product and, overall, it must be more competitive in performances and costs. Accordingly, the development of a new process is a multilevel and multivariate problem that requires a systematic and hierarchical approach. The present paper focuses on the development of a Tube Hydroforming process capable to replace the current practice for production of T-Joint parts made of AISI 316L for the water pipes market. In particular, the problem must withstand many process and product constraints. Therefore, it was split in three steps focused on specific aspects of the process: identification of process parameters and configuration, numerical optimization of the blank tube dimensions (length and thickness), experimental tests and final improvements. In particular, two numerical methods were implemented in the optimization step: the line-search method to approach to the optimum point and Bisection method to refine the search. These approaches allowed us to identify the optimum process configuration and, in particular, the optimal dimensions of the blank tube that allows one to achieve the product requirements with the minimum cost of material.

Nebulized jet-based printing of bio-electrical scaffolds for neural tissue engineering: a feasibility study.

In this paper we investigate the application of a direct writing technique for printing conductive patterns onto a biocompatible electrospun-pyrolysed carbon-fibre-based substrate. The result is a first study towards the production of bio-electrical scaffolds that could be used to enhance the promotion of efficient connections among neurons for in vitro studies in the field of neural tissue engineering. An electrospinning process is employed for production of the materials derived from the precursor polyacrylonitrile, in which the embedding of carbon nanotubes (CNTs) is also investigated. Subsequently, the methodology of research into suitable parameters for the printed electronics, using a commercial silver nanoparticle (Øavg,particle size âˆ¼ 100 nm) ink, is described. The results show values of 2 Ω cm for the resistivity of the carbon-fibre materials and conductive printed lines of resistance ∼50 Ω on glass and less than ∼140 Ω on carbon-fibre samples. Biocompatibility results demonstrate the possibility of using electrospun-pyrolysed mats, also with embedded CNTs, as potential neural substrates for spatially localized electrical stimulation across a tissue. In addition, the data concerning the potential toxicity of silver suspensions are in accordance with the literature, showing a dose-dependent behaviour. This work is a pioneering feasibility study of the use of the flexible and versatile printed electronic approach, combined with engineered biocompatible substrates, to realize integrated bio-electrical scaffolds for in vitro neural tissue engineering applications.