Potential of Nanocellulose as a Dietary Fiber Isolated from Brewer's Spent Grain.

Steady growth in beer production is increasing the number of by-products named brewers' spent grain. Such by-products are a source of several components, where cellulose is usually present in high amounts. The aim of this study was to develop a protocol to obtain a mix of cellulose microfibers with an average diameter of 8-12 µm and cellulose nanoplatelets with an average thickness of 100 nm, which has several applications in the food industry. The process comprised one alkaline treatment followed by acid hydrolysis, giving a new mix of micro and nanocellulose. This mix was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and laser scanning microscopy corroborating the presence and measurements of the cellulose nanostructure, showing an aspect ratio of up to 500. Finally, we demonstrated that the administration of this new type of nanocellulose allowed us to control the weight of mice (feed intake), showing a significant percentage of weight reduction (4.96%) after 15 days compared with their initial weight, indicating the possibility of using this material as a dietary fiber.

Enzymatic hydrolysis of cellulose nanoplatelets as a source of sugars with the concomitant production of cellulose nanofibrils.

Cellulose, the most abundant biopolymer on earth, is produced at different ratios by all land plants. Since the morphology and crystallinity of cellulose are key factors involved in its enzymatic hydrolysis, in the present work, we tackled the study of the effects of such variables on the nanocellulose conversion into glucose. Cellulase from Trichoderma sp at 37 °C was used to produce glucose, the best results were found for the cellulose nanoplatelets (S-CNP) after 60 h of hydrolysis, which afforded a conversion of 47% to glucose, in contrast to 15% for the non-purified sample (W-CP) and 22% for microcrystalline cellulose (MCC20) used as control. The X-ray diffractogram recorded on the samples showed an initial crystallinity index of 45%, 54% and 72% for W-CNP, S-CNP and MCC20, respectively. Also, we showed that after 24 h of hydrolysis, long cellulose nanofibrils (∅ ≈ 30 nm) were found as a residue.

Removal and accumulation of cadmium and lead by Typha latifolia exposed to single and mixed metal solutions.

We investigated the effect of Cd and Pb on the growth of the aquatic macrophyte Typha latifolia; the removal from the solution and the accumulation of these elements by the plant were also studied. Thus, small plants of T. latifolia, collected from a noncontaminated site, were exposed for 10 days to Cd and Pb, in a single solution or in mixture solutions, at two concentrations of the metals (5 and 7.5 mg/L). Our results showed that T. latifolia removed effectively Cd and Pb from solutions and was able to accumulate these metals in the roots and, to a lesser extent, in the leaves. Our findings suggested a synergistic effect of Cd and Pb with respect to the toxicity to T. latifolia. Additionally, Cd diminished the Pb absorption by T. latifolia. Our results confirmed, using scanning electron microscopy, the internalization of Cd and Pb in T. latifolia.

Production and detailed characterization of bean husk-based carbon: efficient cadmium (II) removal from aqueous solutions.

We report the production of a modified carbon by heat treating bean husk (Phaseolus vulgaris) at 270 degrees C in Ar, followed by chemical activation using HNO(3). The material was studied using thermogravimetric analysis (TGA), infrared spectroscopy (IRS), high-resolution transmission electron microscopy (HRTEM), elemental mapping, energy dispersive X-ray spectroscopy (EDX), X-ray powder diffraction and scanning electron microscopy (SEM). Cd(2+) sorption studies with this material were carried out at different concentrations. It was found that cadmium (II) is effectively removed by the modified material obtained from bean husk (180 mg/g). The sorption mechanism is discussed in terms of the activated surface properties. A relationship between the oxygen content and sorption was found in this novel material. Commercial activated carbon (AC) (F400) was used for comparison.