Package-Less Liquid Phase Sensing Using Surface Acoustic Waves on Lithium Tantalate Oxide.

Surface acoustic wave (SAW) transducers propagating shear waves are compatible with sensing chemical compounds in a liquid phase. However, if the liquid surrounding the sensor possesses a higher permittivity than the piezoelectric substrate, then the interdigitated electrodes for converting the incoming electromagnetic wave to acoustic waves are susceptible to capacitive short-circuiting, leading to excessive insertion losses. By using high-permittivity lithium tantalate oxide (LTO), we demonstrate chemical sensing in water without the need for dedicated microfluidic packaging. Nevertheless, the gravimetric sensitivity of these package-less transmission Love-mode delay lines remains comparable to that of low-permittivity quartz when appropriately tuning the guiding layer of thin film to confine energy to the surface in a Love mode. We extend the transmission line gravimetric sensitivity measurement to a reflective delay line geometry for passive transducers that can be wirelessly probed. For instance, ground-penetrating radar (GPR) can be used for subsurface sensing, here targeting water pollution detection, operating in the 100-500-MHz range. This center frequency was selected as a tradeoff between penetration depth (lower frequency) and antenna size (smaller at higher frequency). Nonspecific binding of proteins detection is shown in the context of biosensing applications.

Toward conformational identification of molecules in 2D and 3D self-assemblies on surfaces.

The design of supramolecular networks based on organic molecules deposited on surfaces, is highly attractive for various applications. One of the remaining challenges is the expansion of monolayers to well-ordered multilayers in order to enhance the functionality and complexity of self-assemblies. In this study, we present an assessment of molecular conformation from 2D to 3D supramolecular networks adsorbed onto a HOPG surface under ambient conditions utilizing a combination of scanning probe microscopies and atomic force microscopy- infrared (AFM-IR). We have observed that the infrared (IR) spectra of the designed molecules vary from layer to layer due to the modifications in the dihedral angle between the C=O group and the neighboring phenyl ring, especially in the case of a 3D supramolecular network consisting of multiple layers of molecules.

Dissociation of N2 on a Si(111)-7x7 Surface at Room Temperature.

We demonstrate that the strong N2 bond can be efficiently dissociated at low pressure and ambient temperature on a Si(111)-7x7 surface. The reaction was experimentally investigated by scanning tunnelling microscopy and X-ray photoemission spectroscopy. Experimental and density functional theory results suggest that relatively low thermal energy collision of N2 with the surface can facilitate electron transfer from the Si(111)-7x7 surface to the π*-antibonding orbitals of N2 that significantly weaken the N2 bond. This activated N2 triple bond dissociation on the surface leads to the formation of a Si3 N interface.

[2+2] Cyclo-Addition Reactions for Efficient Polymerization on a HOPG Surface at Ambient Conditions.

Polymers obtained by on-surface chemistry have emerged as a class of promising materials. Here, we propose a new strategy to obtain self-assembled 1D polymers by using photochemical [2+2] cyclo-addition or by using a mild thermal annealing. All nanostructures are fully characterized by using scanning tunneling microscopy at ambient conditions on a graphite surface. We demonstrated that nature of the stimulus strongly alters the overall quality of the resulting polymers in terms of length and number of defects. This new way is an efficient method to elaborate on-surface self-assembled 1D polymers.

Degradation of Sub-Micrometer Sensitive Polymer Layers of Acoustic Sensors Exposed to Chlorpyrifos Water-Solution.

The detection of organophosphates, a wide class of pesticides, in water-solution has a huge impact in environmental monitoring. Acoustic transducers are used to design passive wireless sensors for the direct detection of pesticides in water-solution by using tailored polymers as sensitive layers. We demonstrate by combining analytical chemistry tools that organophosphate molecules strongly alter polymer layers widely used in acoustic sensors in the presence of water. This chemical degradation can limit the use of these polymers in detection of organophosphates in water-solution.

On-Surface Synthesis of Ligands to Elaborate Coordination Polymers on an Au(111) Surface.

On-surface metal-organic polymers have emerged as a class of promising 2D materials. Here, we propose a new strategy to obtain coordination polymers by transforming supramolecular networks into coordination polymers by surface-assisted cyclo-dehydrogenation of organic building blocks. All nanostructures are fully characterized by using scanning tunneling microscopy under ultra-high vacuum on a gold surface. We demonstrated that the balance between molecule-molecule interaction and molecule-substrate interaction can be drastically modified by a strong modification of the geometry of the molecules thanks to a thermal annealing. This new way is an efficient method to elaborate on-surface coordination polymers.

Unravelling the growth mechanism of (3,1) graphene nanoribbons on a Cu(111) surface.

The growth of graphene nanoribbons has been widely investigated on metal surfaces in an ultrahigh vacuum. Here, we re-investigate the growth of graphene nanoribbons obtained by thermal annealing of 9,9'-bianthryl derivatives on a Cu(111) surface by using scanning tunnelling microscopy. On the basis of our results, we propose to complete the reaction mechanism commonly accepted in the literature by adding an intramolecular hydrogen atom transfer from the 2,2'-positions to the 10,10'-positions as a key-step in the formation of (3,1)-graphene nanoribbons on a Cu(111) surface.

Nano-sheets of two-dimensional polymers with dinuclear (arene)ruthenium nodes, synthesised at a liquid/liquid interface.

We developed a new class of mono- or few-layered two-dimensional polymers based on dinuclear (arene)ruthenium nodes, obtained by combining the imine condensation with an interfacial chemistry process, and use a modified Langmuir-Schaefer method to transfer them onto solid surfaces. Robust nano-sheets of two-dimensional polymers including dinuclear complexes of heavy ruthenium atoms as nodes were synthesised. These nano-sheets, whose thickness is of a few tens of nanometers, were suspended onto solid porous membranes. Then, they were thoroughly characterised with a combination of local probes, including Raman spectroscopy, Fourier transform infrared spectroscopy and transmission electron microscopy in imaging and diffraction mode.

Energy funnelling within multichromophore architectures monitored with subnanometre resolution.

The funnelling of energy within multichromophoric assemblies is at the heart of the efficient conversion of solar energy by plants. The detailed mechanisms of this process are still actively debated as they rely on complex interactions between a large number of chromophores and their environment. Here we used luminescence induced by scanning tunnelling microscopy to probe model multichromophoric structures assembled on a surface. Mimicking strategies developed by photosynthetic systems, individual molecules were used as ancillary, passive or blocking elements to promote and direct resonant energy transfer between distant donor and acceptor units. As it relies on organic chromophores as the elementary components, this approach constitutes a powerful model to address fundamental physical processes at play in natural light-harvesting complexes.

Collective radical oligomerisation induced by an STM tip on a silicon surface.

Over the past decade, on-surface fabrication of organic nanostructures has been widely investigated for the development of molecular electronic components, catalysts, and new materials. Here, we introduce a new strategy to obtain alkyl oligomers in a controlled manner using on-surface radical oligomerisations that are triggered by electrons between the tip of a scanning tunnelling microscope and the Si(111)√3 ×√3 R30°-B surface. This electron transfer event only occurs when the bias voltage is below -4.5 V and allows access to reactive radical species under exceptionally mild conditions. This transfer can effectively 'switch on' a sequence leading to the formation of oligomers of defined size distribution thanks to the on-surface confinement of the reactive species. Our approach enables new ways to initiate and control radical oligomerisations with tunnelling electrons, leading to molecularly precise nanofabrication.

Large-extended 2D supramolecular network of dipoles with parallel arrangement on a Si(111)-B surface.

We have investigated the self-assembly of a strong dipolar molecule (LDipCC) on the semiconducting Si(111)-B surface with scanning tunneling microscopy (STM), density functional theory (DFT) calculations and STM simulations. Although the formation of an extended two-dimensional network was clearly revealed by STM under ultra-high vacuum, the assignment of a specific STM signature to the different terminal groups from the LDipCC molecular unit required a complete analysis by numerical simulations. The overall observed assembly is explained in terms of STM contrasts associated with the molecular structure of LDipCC and the molecule-surface interactions. To distinguish the relative arrangement of the dipolar molecules within the assembly, a rational combination of experimental results and electronic structure calculations allows us to identify a single adsorbed LDipCC phase in which the molecular dipoles are homogeneously arranged into a parallel fashion on the Si(111)-B surface.

Subsurface H2S Detection by a Surface Acoustic Wave Passive Wireless Sensor Interrogated with a Ground Penetrating Radar.

Long-term monitoring of organic pollutants in the soil is a major environmental challenge. We propose to meet this issue by the development of a polymer dedicated to selectively react with H2S, coating surface acoustic wave transducers designed as passive cooperative targets with the compound, and probing their response using Ground Penetrating RADAR, thus providing the capability to monitor the presence of H2S in the subsurface environment. The selectivity is brought by including lead(II) cation in a reticulated polymer matrix which can be deposited as a thin layer on a surface acoustic wave sensor. We demonstrate a signal enhancement mechanism in which water absorption magnifies the signal detection, making the sensor most sensitive to H2S in an underground environment saturated with moisture.

Copper-assisted oxidation of catechols into quinone derivatives.

Catechols are ubiquitous substances often acting as antioxidants, thus of importance in a variety of biological processes. The Fenton and Haber-Weiss processes are thought to transform these molecules into aggressive reactive oxygen species (ROS), a source of oxidative stress and possibly inducing degenerative diseases. Here, using model conditions (ultrahigh vacuum and single crystals), we unveil another process capable of converting catechols into ROSs, namely an intramolecular redox reaction catalysed by a Cu surface. We focus on a tri-catechol, the hexahydroxytriphenylene molecule, and show that this antioxidant is thereby transformed into a semiquinone, as an intermediate product, and then into an even stronger oxidant, a quinone, as final product. We argue that the transformations occur via two intramolecular redox reactions: since the Cu surface cannot oxidise the molecules, the starting catechol and the semiquinone forms each are, at the same time, self-oxidised and self-reduced. Thanks to these reactions, the quinone and semiquinone are able to interact with the substrate by readily accepting electrons donated by the substrate. Our combined experimental surface science and ab initio analysis highlights the key role played by metal nanoparticles in the development of degenerative diseases.

Stable self-assembly of dipolar molecules on an Au(111) surface under UHV and an inert-atmosphere.

The growth of an extended supramolecular network using dipolar molecules as the building blocks is of great technological interest. We investigated the self-assembly of a dipolar molecule on an Au(111) surface. The formation of an extended two-dimensional network was demonstrated by scanning tunnelling microscopy under ultra-high vacuum and explained in terms of molecule-molecule interactions. This 2D-network is still stable under the pressure of one atmosphere of nitrogen, which demonstrated its interest for the development of submolecular-precisely polyfunctional smart surfaces.

Micrometre-long covalent organic fibres by photoinitiated chain-growth radical polymerization on an alkali-halide surface.

On-surface polymerization is a promising technique to prepare organic functional nanomaterials that are challenging to synthesize in solution, but it is typically used on metal substrates, which play a catalytic role. Previous examples on insulating surfaces have involved intermediate self-assembled structures, which face high barriers to diffusion, or annealing to higher temperatures, which generally causes rapid dewetting and desorption of the monomers. Here we report the photoinitiated radical polymerization, initiated from a two-dimensional gas phase, of a dimaleimide monomer on an insulating KCl surface. Polymer fibres up to 1 µm long are formed through chain-like rather than step-like growth. Interactions between potassium cations and the dimaleimide's oxygen atoms facilitate the propagation of the polymer fibres along a preferred axis of the substrate over long distances. Density functional theory calculations, non-contact atomic force microscopy imaging and manipulations at room temperature were used to explore the initiation and propagation processes, as well as the structure and stability of the resulting one-dimensional polymer fibres.

Tuning the Kondo resonance in two-dimensional lattices of cerium molecular complexes.

Cerium intermetallics have raised a lot of interest for the past forty years thanks to their very unusual and interesting electronic and magnetic properties. This can be explained by the peculiar electronic configuration of Ce (4f1) that allows different oxidation states leading to singular behavior such as quantum phase transitions, heavy-fermion behavior and the Kondo effect. In this work, we used a mixed-valence molecular analogue to study the Kondo effect down to the atomic scale by means of scanning tunneling microscopy/spectroscopy (STM/STS) for which new many-body effects are expected to emerge due to reduced dimensionality and specific chemical environment of the 4f-ion. For that purpose, double-decker molecular complexes hosting a Ce ion were synthesized and adsorbed onto Ag and Cu (111) surfaces forming two-dimensional lattices. As a result, we observed a zero-bias conductance resonance on Ag only indicative of a Kondo effect arising from the coupling between a molecular spin and the conducting electrons of the metallic surface. The emergence of the Kondo effect is discussed in terms of intermolecular and molecule/substrate interactions. This work expands the little knowledge to date on the structural and related electronic properties of Ce-based molecular systems on surfaces. In particular, it shows that Ce-based double deckers are good platforms to obtain insight into 4f-induced many-body effects down to the nanometer scale and in two-dimensional lattices. Moreover, this outcome has a strong impact for future applications of molecular devices in which both metals are commonly used as electrical contacts.

Soluble Two-Dimensional Covalent Organometallic Polymers by (Arene)Ruthenium-Sulfur Chemistry.

A class of two-dimensional (2D) covalent organometallic polymers, with nanometer-scale crosslinking, was obtained by arene(ruthenium) sulfur chemistry. Their ambivalent nature, with positively charged crosslinks and lypophylic branches is the key to the often sought-for and usually hard-to-achieve solubility of 2D polymers in various kinds of solvents. Solubility is here controlled by the planarity of the polymer, which in turn controls Coulomb interactions between the polymer layers. High planarity is achieved for high symmetry crosslinks and short, rigid branches. Owing to their solubility, the polymers are easily processable, and can be handled as powder, deposited on surfaces by mere spin-coating, or suspended across membranes by drop-casting. The novel 2D materials are potential candidates as flexible membranes for catalysis, cancer therapy, and electronics.

Towards 1D nanolines on a monolayered supramolecular network adsorbed on a silicon surface.

The growth of 3D extended periodic networks made up of π-conjugated molecules on semi-conductor surfaces is of interest for the integration of nano-components in the future generations of smart devices. In the work presented in this article, we successfully achieved the formation of bilayered networks on a silicon surface including 1D-isolated nanolines in the second layer. Firstly, we observed the formation of a 2D large-scale supramolecular network in the plane of a silicon surface through the deposition of tailored molecules. Then using the same molecules, a second-layer, based on 1D nanolines, grew above the first layer, thanks to a template effect. Mono- or bi-layered networks were found to be stable from 100 K up to room temperature. These networks were investigated by scanning tunnel microscopy imaging under an ultra-high vacuum (UHV-STM).

Controlled Directional Motions of Molecular Vehicles, Rotors, and Motors: From Metallic to Silicon Surfaces, a Strategy to Operate at Higher Temperatures.

In the last decade, many nanomachines with controlled molecular motions have been studied, mainly on metallic surfaces, which are easy to obtain very clean, and are stable over months. However, the studies of mechanical properties of nanomachines are mainly performed at very low temperatures, usually between 5 and 80 K, which prevents any kind of applications. In this Minireview, we will present our strategy to operate at higher temperatures, in particular through the use of semiconducting silicon surfaces. We also review our best achievements in the field through some examples of rotating molecular machines that have been designed, synthesized, and studied in our groups. On metallic surfaces, the nanovehicles are molecules with two or four triptycenes as wheels and the molecular motor is built around a ruthenium organometallic center with a piano-stool geometry and peripheric ferrocenyl groups. On semiconducting silicon surfaces, vehicles are also made from triptycene fragments and the rotor is a pentaphenylbenzene molecule.

Surface-induced optimal packing of two-dimensional molecular networks.

High-density packing in organic crystals is usually associated with an increase of the coordination between molecules. Such a concept is not necessarily extended to two-dimensional molecular networks self-assembled on a solid surface, for which we demonstrate the key role of the surface in inducing the optimal packing. By a combination of scanning tunneling microscopy experiments and multiscale computer simulations, we study the phase transition between two polymorphs. We find that, contrary to intuition, the structure with the lowest packing fraction corresponds to the highest molecular coordination number, due to the competition between surface and intermolecular forces. Having the lowest free energy, this structure spreads out as the most stable polymorph over a wide range of molecular concentrations.