Exploring the influence of focused ion beam processing and scanning electron microscopy imaging on solid-state electrolytes.

Performing reliable preparation of transmission electron microscopy (TEM) samples is the necessary basis for a meaningful investigation by ex situ and even more so by in situ TEM techniques, but it is challenging using materials that are sensitive to electron beam irradiation. Focused ion beam is currently the most commonly employed technique for a targeted preparation, but the structural modifications induced during focused ion beam preparation are not fully understood for a number of materials. Here, we have investigated the impact of both the electron and the Ga+ ion beam on insulating solid-state electrolytes (lithium phosphorus oxynitride, Na-ß"-alumina solid electrolyte and Na3.4Si2.4Zr2P0.6O12 (NaSICON)) and observed significant lithium/sodium whisker growth induced by both the electron and ion beam already at fairly low dose, leading to a significant change in the chemical composition. The metal whisker growth is presumably mainly due to surface charging, which can be reduced by coating with a gold layer or preparation under cryogenic conditions as efficient approaches to stabilize the solid electrolyte for scanning electron microscopy imaging and TEM sample preparation. Details on the different preparation approaches, the acceleration voltage dependence and the induced chemical and morphological changes are reported.

Nanocrystalline graphene at high temperatures: insight into nanoscale processes.

During high temperature pyrolysis of polymer thin films, nanocrystalline graphene with a high defect density, active edges and various nanostructures is formed. The catalyst-free synthesis is based on the temperature assisted transformation of a polymer precursor. The processing conditions have a strong influence on the final thin film properties. However, the precise elemental processes that govern the polymer pyrolysis at high temperatures are unknown. By means of time resolved in situ transmission electron microscopy investigations we reveal that the reactivity of defects and unsaturated edges plays an integral role in the structural dynamics. Both mobile and stationary structures with varying size, shape and dynamics have been observed. During high temperature experiments, small graphene fragments (nanoflakes) are highly unstable and tend to lose atoms or small groups of atoms, while adjacent larger domains grow by addition of atoms, indicating an Ostwald-like ripening in these 2D materials, besides the mechanism of lateral merging of nanoflakes with edges. These processes are also observed in low-dose experiments with negligible electron beam influence. Based on energy barrier calculations, we propose several inherent temperature-driven mechanisms of atom rearrangement, partially involving catalyzing unsaturated sites. Our results show that the fundamentally different high temperature behavior and stability of nanocrystalline graphene in contrast to pristine graphene is caused by its reactive nature. The detailed analysis of the observed dynamics provides a pioneering overview of the relevant processes during ncg heating.

Anion Doping of Ferromagnetic Thin Films of La0.74Sr0.26MnO3-δ via Topochemical Fluorination.

Chemical doping via insertion of ions into the lattice of a host material is a key strategy to flexibly manipulate functionalities of materials. In this work, we present a novel case study on the topotactic insertion of fluoride ions into oxygen-deficient ferromagnetic thin films of La0.74Sr0.26MnO3-δ (LSMO) epitaxially grown onto single-crystal SrTiO3 (STO) substrates. The effect of fluorination on the film structure, composition, and magnetic properties is compared with the case of oxygen-deficient and fully-oxidized LSMO films. Although incorporation of F- anions does not significantly alter the volume of the LSMO unit cell, a strong impact on the magnetic characteristics, including a remarkable suppression of Curie temperature and saturation magnetization accompanied by an increase in magnetic coercivity, was found. The change in magnetic properties can be ascribed to the disruption of the ferromagnetic exchange interactions along Mn-anion-Mn chains driven by F- doping into the LSMO lattice. Our results indicate that F- doping is a powerful means to effectively modify the magnetic functional properties of perovskite manganites.

High-Performance All-Printed Amorphous Oxide FETs and Logics with Electronically Compatible Electrode/Channel Interface.

Oxide semiconductors typically show superior device performance compared to amorphous silicon or organic counterparts, especially when they are physical vapor deposited. However, it is not easy to reproduce identical device characteristics when the oxide field-effect transistors (FETs) are solution-processed/printed; the level of complexity further intensifies with the need to print the passive elements as well. Here, we developed a protocol for designing the most electronically compatible electrode/channel interface based on the judicious material selection. Exploiting this newly developed fabrication schemes, we are now able to demonstrate high-performance all-printed FETs and logic circuits using amorphous indium-gallium-zinc oxide (a-IGZO) semiconductor, indium tin oxide (ITO) as electrodes, and composite solid polymer electrolyte as the gate insulator. Interestingly, all-printed FETs demonstrate an optimal electrical performance in terms of threshold voltages and device mobility and may very well be compared with devices fabricated using sputtered ITO electrodes. This observation originates from the selection of electrode/channel materials from the same transparent semiconductor oxide family, resulting in the formation of In-Sn-Zn-O (ITZO)-based-diffused a-IGZO-ITO interface that controls doping density while ensuring high electrical performance. Compressive spectroscopic studies reveal that Sn doping-mediated excellent band alignment of IGZO with ITO electrodes is responsible for the excellent device performance observed. All-printed n-MOS-based logic circuits have also been demonstrated toward new-generation portable electronics.

Inner- and outer-wall sorting of double-walled carbon nanotubes.

Double-walled carbon nanotubes (DWCNTs) consist of two coaxially aligned single-walled carbon nanotubes (SWCNTs), and previous sorting methods only achieved outer-wall electronic-type selectivity. Here, a separation technique capable of sorting DWCNTs by semiconducting (S) or metallic (M) inner- and outer-wall electronic type is presented. Electronic coupling between the inner and outer wall is used to alter the surfactant coating around each of the DWCNT types, and aqueous gel permeation is used to separate them. Aqueous methods are used to remove SWCNT species from the raw material and prepare enriched DWCNT fractions. The enriched DWCNT fractions are then transferred into either chlorobenzene or toluene using the copolymer PFO-BPy to yield the four inner@outer combinations of M@M, M@S, S@M and S@S. The high purity of the resulting fractions is verified by absorption measurements, transmission electron microscopy, atomic force microscopy, resonance Raman mapping and high-density field-effect transistor devices.

Understanding the graphitization and growth of free-standing nanocrystalline graphene using in situ transmission electron microscopy.

Graphitization of polymers is an effective way to synthesize nanocrystalline graphene on different substrates with tunable shape, thickness and properties. The catalyst free synthesis results in crystallite sizes on the order of a few nanometers, significantly smaller than commonly prepared polycrystalline graphene. Even though this method provides the flexibility of graphitizing polymer films on different substrates, substrate free graphitization of freestanding polymer layers has not been studied yet. We report for the first time the thermally induced graphitization and domain growth of free-standing nanocrystalline graphene thin films using in situ TEM techniques. High resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and electron energy loss spectroscopy (EELS) techniques were used to analyze the graphitization and the evolution of nanocrystalline domains at different temperatures by characterizing the crystallinity and domain size, further supported by ex situ Raman spectroscopy. The graphitization was comparable to the substrate supported heating and the temperature dependence of graphitization was analyzed. In addition, the in situ analysis of the graphitization enabled direct imaging of some of the growth processes taking place at different temperatures.

In situ TEM studies of micron-sized all-solid-state fluoride ion batteries: Preparation, prospects, and challenges.

Trustworthy preparation and contacting of micron-sized batteries is an essential task to enable reliable in situ TEM studies during electrochemical biasing. Some of the challenges and solutions for the preparation of all-solid-state batteries for in situ TEM electrochemical studies are discussed using an optimized focused ion beam (FIB) approach. In particular redeposition, resistivity, porosity of the electrodes/electrolyte and leakage current are addressed. Overcoming these challenges, an all-solid-state fluoride ion battery has been prepared as a model system for in situ TEM electrochemical biasing studies and first results on a Bi/La0.9 Ba0.1 F2.9 half-cell are presented. Microsc. Res. Tech. 79:615-624, 2016. © 2016 Wiley Periodicals, Inc.

Vanadium Oxyfluoride/Few-Layer Graphene Composite as a High-Performance Cathode Material for Lithium Batteries.

Metal oxyfluoride compounds are gathering significant interest as cathode materials for lithium ion batteries at the moment because of their high theoretical capacity and resulting high energy density. In this regard, a new and direct approach is presented to synthesize phase-pure vanadium oxyfluoride (VO2F). The structure of VO2F was identified by Rietveld refinement of the powder X-ray diffraction (XRD) pattern. It crystallizes in a perovskite-type structure with disorder of the oxide and fluoride ions. The as-synthesized VO2F was tested as a cathode material for lithium ion batteries after being surface-coated with few-layer graphene. The VO2F delivered a first discharge capacity of 254 mA h g(-1) and a reversible capacity of 208 mA h g(-1) at a rate of C/20 for the first 20 cycles with an average discharge voltage of 2.84 V, yielding an energy density of 591 W h kg(-1). Improved rate capability that outperforms the previous report has been achieved, showing a discharge capacity of 150 mA h g(-1) for 1 C. The structural changes during lithium insertion and extraction were monitored by ex-situ XRD analysis of the electrodes discharged and charged to various stages. Lithium insertion results in an irreversible structural change of the anion lattice from (3)/4 cubic close packing to hexagonal close packing to accommodate the inserted lithium ions while keeping the overall space-group symmetry. For the first time we have revealed a structural change for the ReO3-type structure of as-prepared VO2F to the RhF3 structure after lithiation/delithiation, with structural changes that have not been observed in previous reports. Furthermore, the new synthetic approach described here would be a platform for the synthesis of new oxyfluoride compounds.

Boosting the power performance of multilayer graphene as lithium-ion battery anode via unconventional doping with in-situ formed Fe nanoparticles.

Graphene is extensively investigated and promoted as a viable replacement for graphite, the state-of-the-art material for lithium-ion battery (LIB) anodes, although no clear evidence is available about improvements in terms of cycling stability, delithiation voltage and volumetric capacity. Here we report the microwave-assisted synthesis of a novel graphene-based material in ionic liquid (i.e., carved multilayer graphene with nested Fe3O4 nanoparticles), together with its extensive characterization via several physical and chemical techniques. When such a composite material is used as LIB anode, the carved paths traced by the Fe3O4 nanoparticles, and the unconverted metallic iron formed in-situ upon the 1(st) lithiation, result in enhanced rate capability and, especially at high specific currents (i.e., 5 A g(-1)), remarkable cycling stability (99% of specific capacity retention after 180 cycles), low average delithiation voltage (0.244 V) and a substantially increased volumetric capacity with respect to commercial graphite (58.8 Ah L(-1) vs. 9.6 Ah L(-1)).

VOCl as a Cathode for Rechargeable Chloride Ion Batteries.

A novel room temperature rechargeable battery with VOCl cathode, lithium anode, and chloride ion transporting liquid electrolyte is described. The cell is based on the reversible transfer of chloride ions between the two electrodes. The VOCl cathode delivered an initial discharge capacity of 189 mAh g(-1) . A reversible capacity of 113 mAh g(-1) was retained even after 100 cycles when cycled at a high current density of 522 mA g(-1) . Such high cycling stability was achieved in chloride ion batteries for the first time, demonstrating the practicality of the system beyond a proof of concept model. The electrochemical reaction mechanism of the VOCl electrode in the chloride ion cell was investigated in detail by ex situ X-ray diffraction (XRD), infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The results confirm reversible deintercalation-intercalation of chloride ions in the VOCl electrode.

Solvent-surface interactions control the phase structure in laser-generated iron-gold core-shell nanoparticles.

This work highlights a strategy for the one-step synthesis of FeAu nanoparticles by the pulsed laser ablation of alloy targets in the presence of different solvents. This method allows particle generation without the use of additional chemicals; hence, solvent-metal interactions could be studied without cross effects from organic surface ligands. A detailed analysis of generated particles via transmission electron microscopy in combination with EDX elemental mapping could conclusively verify that the nature of the used solvent governs the internal phase structure of the formed nanoparticles. In the presence of acetone or methyl methacrylate, a gold shell covering a non-oxidized iron core was formed, whereas in aqueous media, an Au core with an Fe3O4 shell was generated. This core-shell morphology was the predominant species found in >90% of the examined nanoparticles. These findings indicate that fundamental chemical interactions between the nanoparticle surface and the solvent significantly contribute to phase segregation and elemental distribution in FeAu nanoparticles. A consecutive analysis of resulting Fe@Au core-shell nanoparticles revealed outstanding oxidation resistance and fair magnetic and optical properties. In particular, the combination of these features with high stability magnetism and plasmonics may create new opportunities for this hybrid material in imaging applications.

Performance study of magnesium-sulfur battery using a graphene based sulfur composite cathode electrode and a non-nucleophilic Mg electrolyte.

Here we report for the first time the development of a Mg rechargeable battery using a graphene-sulfur nanocomposite as the cathode, a Mg-carbon composite as the anode and a non-nucleophilic Mg based complex in tetraglyme solvent as the electrolyte. The graphene-sulfur nanocomposites are prepared through a new pathway by the combination of thermal and chemical precipitation methods. The Mg/S cell delivers a higher reversible capacity (448 mA h g(-1)), a longer cyclability (236 mA h g(-1) at the end of the 50(th) cycle) and a better rate capability than previously described cells. The dissolution of Mg polysulfides to the anode side was studied by X-ray photoelectron spectroscopy. The use of a graphene-sulfur composite cathode electrode, with the properties of a high surface area, a porous morphology, a very good electronic conductivity and the presence of oxygen functional groups, along with a non-nucleophilic Mg electrolyte gives an improved battery performance.

Mechanical Milling Assisted Synthesis and Electrochemical Performance of High Capacity LiFeBO3 for Lithium Batteries.

Borate chemistry offers attractive features for iron based polyanionic compounds. For battery applications, lithium iron borate has been proposed as cathode material because it has the lightest polyanionic framework that offers a high theoretical capacity. Moreover, it shows promising characteristics with an element combination that is favorable in terms of sustainability, toxicity, and costs. However, the system is also associated with a challenging chemistry, which is the major reason for the slow progress in its further development as a battery material. The two major challenges in the synthesis of LiFeBO3 are in obtaining phase purity and high electrochemical activity. Herein, we report a facile and scalable synthesis strategy for highly pure and electrochemically active LiFeBO3 by circumventing stability issues related to Fe(2+) oxidation state by the right choice of the precursor and experimental conditions. Additionally, we carried out a Mössbauer spectroscopic study of electrochemical charged and charged-discharged LiFeBO3 and reported a lithium diffusion coefficient of 5.56 × 10(-14) cm(2) s(-1) for the first time.

Ink-Jet Printed CMOS Electronics from Oxide Semiconductors.

Complementary metal oxide semiconductor (CMOS) technology with high transconductance and signal gain is mandatory for practicable digital/analog logic electronics. However, high performance all-oxide CMOS logics are scarcely reported in the literature; specifically, not at all for solution-processed/printed transistors. As a major step toward solution-processed all-oxide electronics, here it is shown that using a highly efficient electrolyte-gating approach one can obtain printed and low-voltage operated oxide CMOS logics with high signal gain (≈21 at a supply voltage of only 1.5 V) and low static power dissipation.

On the self-assembly of TiOx into 1D NP network nanostructures.

Here, we report for the first time a 'ligand free' method of designing 1D TiOx supramolecular network materials, which starts from Ti bare metal powder. Each TiOx oxidation step has been carefully investigated with different analytical techniques, including high resolution transmission electron microscopy/high resolution scanning electron microscopy (HRTEM/HRSEM), x-ray photoelectron spectroscopy (XPS), Raman spectroscopy and superconducting quantum interference device (SQUID) measurements. The self-assembly of TiOx nanoparticles (NPs) into 1D supramolecular nanoparticle networks is induced by the formation of mixed valent Ti(II,III) species. The synthesis starts with etching a bare Ti surface, followed by a continuous oxidation of TiOx clusters and NPs, and it finally ends with the self-assembly into rigid 1D NPs chains. Today, such self-assembled 1D NP TiOx network materials are bridging the gap between the nanoscale and the macroscopic material world and will further provide interesting research opportunities.

Microstructural and plasmonic modifications in Ag-TiO2 and Au-TiO2 nanocomposites through ion beam irradiation.

The development of new fabrication techniques of plasmonic nanocomposites with specific properties is an ongoing issue in the plasmonic and nanophotonics community. In this paper we report detailed investigations on the modifications of the microstructural and plasmonic properties of metal-titania nanocomposite films induced by swift heavy ions. Au-TiO2 and Ag-TiO2 nanocomposite thin films with varying metal volume fractions were deposited by co-sputtering and were subsequently irradiated by 100 MeV Ag(8+) ions at various ion fluences. The morphology of these nanocomposite thin films before and after ion beam irradiation has been investigated in detail by transmission electron microscopy studies, which showed interesting changes in the titania matrix. Additionally, interesting modifications in the plasmonic absorption behavior for both Au-TiO2 and Ag-TiO2 nanocomposites were observed, which have been discussed in terms of ion beam induced growth of nanoparticles and structural modifications in the titania matrix.

Influence of particle size and fluorination ratio of CF x precursor compounds on the electrochemical performance of C-FeF2 nanocomposites for reversible lithium storage.

Systematical studies of the electrochemical performance of CF x -derived carbon-FeF2 nanocomposites for reversible lithium storage are presented. The conversion cathode materials were synthesized by a simple one-pot synthesis, which enables a reactive intercalation of nanoscale Fe particles in a CF x matrix, and the reaction of these components to an electrically conductive C-FeF2 compound. The pretreatment and the structure of the utilized CF x precursors play a crucial role in the synthesis and influence the electrochemical behavior of the conversion cathode material. The particle size of the CF x precursor particles was varied by ball milling as well as by choosing different C/F ratios. The investigations led to optimized C-FeF2 conversion cathode materials that showed specific capacities of 436 mAh/g at 40 °C after 25 cycles. The composites were characterized by Raman spectroscopy, X-Ray diffraction measurements, electron energy loss spectroscopy and TEM measurements. The electrochemical performances of the materials were tested by galvanostatic measurements.

Green chemistry and nanofabrication in a levitated Leidenfrost drop.

Green nanotechnology focuses on the development of new and sustainable methods of creating nanoparticles, their localized assembly and integration into useful systems and devices in a cost-effective, simple and eco-friendly manner. Here we present our experimental findings on the use of the Leidenfrost drop as an overheated and charged green chemical reactor. Employing a droplet of aqueous solution on hot substrates, this method is capable of fabricating nanoparticles, creating nanoscale coatings on complex objects and designing porous metal in suspension and foam form, all in a levitated Leidenfrost drop. As examples of the potential applications of the Leidenfrost drop, fabrication of nanoporous black gold as a plasmonic wideband superabsorber, and synthesis of superhydrophilic and thermal resistive metal-polymer hybrid foams are demonstrated. We believe that the presented nanofabrication method may be a promising strategy towards the sustainable production of functional nanomaterials.

Morphology, microstructure, and magnetic properties of ordered large-pore mesoporous cadmium ferrite thin film spin glasses.

Herein, we report the synthesis, microstructure, and magnetic properties of cadmium ferrite (CdFe2O4) thin films with both an ordered cubic network of 18 nm diameter pores and single-phase spinel grains averaging 13 nm in diameter. These mesoporous materials were produced through facile polymer templating of hydrated nitrate salt precursors. Both the morphology and the microstructure, including cation site occupancy and electronic bonding configuration, were analyzed in detail by electron microscopy, grazing incidence small-angle X-ray scattering, Raman and X-ray photoelectron spectroscopy, and N2-physisorption. The obtained data demonstrate that the network of pores is retained up to annealing temperatures as high as 650 °C--the onset of crystallization is at ϑ = (590 ± 10) °C. Furthermore, they show that the polymer-templated samples exhibit a "partially" inverted spinel structure with inversion parameter λ = 0.40 ± 0.02. This differs from microcrystalline CdFe2O4 which shows virtually no inversion. Magnetic susceptibility studies reveal ferrimagnetic spin coupling below 147 K and further point to the likelihood of glassy behavior at low temperature (T(f) ≈ 60 K). In addition, analysis of room temperature magnetization data indicates the presence of sub-10 nm diameter superparamagnetic clusters in an otherwise paramagnetic environment.

Surface segregation in TiO2-based nanocomposite thin films.

The morphology of nanocomposites plays a pivotal role in understanding their functionality and determines their capabilities for applications. The use of nanocomposite coatings requires a study of the size effects on their functional properties. Noble metal nanoparticles are promising candidates for nanocomposite thin film applications due to their antibacterial, plasmonic and photocatalytic properties. In this contribution, the morphology of Ag-TiO(2) and Au-TiO(2) nanocomposite thin films has been investigated experimentally using electron tomography in transmission electron microscopy in combination with UV/vis spectroscopy. Based on the additional 3D information obtained from tomography, we propose a two-step model towards the observed bimodal particle size in these nanocomposite thin films prepared by co-sputtering from two different sources. Furthermore, we show that the optical properties exhibit a well-defined relation with the morphology of the nanocomposite thin films. The present investigations demonstrate the potential of electron tomography for revealing the complex structure and formation processes of functional nanocomposites.