Translatability of In Vitro Stress for Predicting Deamidation and Oxidation Biotransformation on Biotherapeutics.

Biotransformation leading to single residue modifications (e.g., deamidation, oxidation) can contribute to decreased efficacy/potency, poor pharmacokinetics, and/or toxicity/immunogenicity for protein therapeutics. Identifying and characterizing such liabilities in vivo are emerging needs for biologics drug discovery. In vitro stress assays involving PBS for deamidation or AAPH for oxidation are commonly used for predicting liabilities in manufacturing and storage and are sometimes considered a predictive tool for in vivo liabilities. However, reports discussing their in vivo translatability are limited. Herein, we introduce a mass spectrometry workflow that characterizes in vivo oxidation and deamidation in pharmacokinetically relevant compartments for diverse protein therapeutic modalities. The workflow has low bias of <10% in quantitating degradation in the relevant pharmacokinetic concentration range for monkey and rabbit serum/plasma (1-100 µg/mL) and allows for high sequence coverage (∼85%) for discovery/monitoring of amino acid modifications. For oxidation and deamidation, the assay was precise, with percent coefficient of variation of <8% at 1-100 µg/mL and ≤6% method-induced artifacts. A high degree of in vitro and in vivo correlation was observed for deamidation on the six diverse protein therapeutics (seven liability sites) tested. In vivo translatability for oxidation liabilities were not observed for the 11 molecules tested using in vitro AAPH stress. One of the molecules dosed in eyes resulted in a false positive and a false negative prediction for in vivo oxidation following AAPH stress. Finally, peroxide stress was also tested but resulted in limited success (1 out of 4 molecules) in predicting oxidation liabilities.

Mass spectrometry-based multi-attribute method in protein therapeutics product quality monitoring and quality control.

The multi-attribute method (MAM), a liquid chromatography-mass spectrometry (LC-MS)-based peptide mapping method, has gained increased interest and applications in the biopharmaceutical industry. MAM can, in one method, provide targeted quantitation of multiple site-specific product quality attributes, as well as new peak detection. In this review, we focus on the scientific and regulatory considerations of using MAM in product quality attribute monitoring and quality control (QC) of therapeutic proteins. We highlight MAM implementation challenges and solutions with several case studies, and provide our perspective on the opportunities to use MS in QC for applications other than standard peptide mapping-based MAM.

Physicochemical and biological impact of metal-catalyzed oxidation of IgG1 monoclonal antibodies and antibody-drug conjugates via reactive oxygen species.

Biotherapeutics are exposed to common transition metal ions such as Cu(II) and Fe(II) during manufacturing processes and storage. IgG1 biotherapeutics are vulnerable to reactive oxygen species (ROS) generated via the metal-catalyzed oxidation reactions. Exposure to these metal ions can lead to potential changes to structure and function, ultimately influencing efficacy, potency, and potential immunogenicity of the molecules. Here, we stress four biotherapeutics of the IgG1 subclass (trastuzumab, trastuzumab emtansine, anti-NaPi2b, and anti-NaPi2b-vc-MMAE) with two common pharmaceutically relevant metal-induced oxidizing systems, Cu(II)/ ascorbic acid and Fe(II)/ H2O2, and evaluated oxidation, size distribution, carbonylation, Fc effector functions, antibody-dependent cellular cytotoxicity (ADCC) activity, cell anti-proliferation and autophaghic flux. Our study demonstrates that the extent of oxidation was metal ion-dependent and site-specific, leading to decreased FcγRIIIa and FcRn receptor binding and subsequently potentially reduced bioactivity, though antigen binding was not affected to a great extent. In general, the monoclonal antibody (mAb) and corresponding antibody-drug conjugate (ADC) showed similar impacts to product quality when exposed to the same metal ion, either Cu(II) or Fe(II). Our study clearly demonstrates that transition metal ion binding to therapeutic IgG1 mAbs and ADCs is not random and that oxidation products show unique structural and functional ramifications. A critical outcome from this study is our highlighting of key process parameters, route of degradation, especially oxidation (metal catalyzed or via ROS), on the CH1 and Fc region of full-length mAbs and ADCs.Abbreviations: DNPH 2,4-dinitrophenylhydrazine; ADC Antibody drug conjugate; ADCC Antibody-dependent cellular cytotoxicity; CDR Complementary determining region; DTT Dithiothreitol; HMWF high molecular weight form; LC-MS Liquid chromatography-mass spectrometry; LMWF low molecular weight forms; MOA Mechanism of action; MCO Metal-catalyzed oxidation; MetO Methionine sulfoxide; mAbs Monoclonal antibodies; MyBPC Myosin binding protein C; ROS Reactive oxygen species; SEC Size exclusion chromatography.

A Comprehensive Assessment of All-Oleate Polysorbate 80: Free Fatty Acid Particle Formation, Interfacial Protection and Oxidative Degradation.

PURPOSE: Enzymatic polysorbate (PS) degradation and resulting free fatty acid (FFA) particles are detrimental to biopharmaceutical drug product (DP) stability. Different types and grades of polysorbate have varying propensity to form FFA particles. This work evaluates the homogenous all-oleate (AO) PS80 alongside heterogeneous PS20 and PS80 grades in terms its propensity to form FFA particles and other important attributes like interfacial protection and oxidation susceptibility. METHODS: FFA particle formation rates were compared by degrading PS using non-immobilized hydrolases and fast degrading DP formulations. Interfacial protection of monoclonal antibodies (mAbs) was assessed by agitation studies in saline using non-degraded and degraded PS. Several antioxidants were assessed for their ability to mitigate AO PS80 oxidation and subsequent mAb oxidation by a 40°C placebo stability study and a 2, 2'-Azobis (2-amidinopropane) dihydrochloride stress model, respectively. RESULTS: Visible and subvisible particles were significantly delayed in AO PS80 formulations compared with heterogeneous PS20 and PS80 formulations. Non-degraded AO PS80 was less protective of mAbs against the air-water interface compared with heterogeneous PS20. Interfacial protection by AO PS80 improved upon degradation owing to high surface activity of FFAs. Diethylenetriaminepentaacetic acid (DTPA) completely mitigated AO PS80 oxidation unlike L-methionine and N-Acetyl-DL-Tryptophan. However, DTPA did not mitigate radical mediated mAb oxidation. CONCLUSION: AO PS80 is a promising alternative to reduce FFA particle formation compared with other PS types and grades. However, limitations observed here---such as lower protection against interfacial stresses and higher propensity for oxidation---need to be considered in assessing the risk/benefit ratio in using AO PS80.

The Use of a 2,2'-Azobis (2-Amidinopropane) Dihydrochloride Stress Model as an Indicator of Oxidation Susceptibility for Monoclonal Antibodies.

Protein oxidation is a major pathway for degradation of biologic drug products. Past literature reports have suggested that 2,2-azobis (2-amidinopropane) dihydrochloride (AAPH), a free radical generator that produces alkoxyl and alkyl peroxyl radicals, is a useful model reagent stress for assessing the oxidative susceptibility of proteins. Here, we expand the applications of the AAPH model by pairing it with a rapid peptide map method to enable site-specific studies of oxidative susceptibility of monoclonal antibodies and their derivatives for comparison between formats, the evaluation of formulation components, and comparisons across the stress models. Comparing the free radical-induced oxidation model by AAPH with a light-induced oxidation model suggests that light-sensitive residues represent a subset of AAPH-sensitive residues and therefore AAPH can be used as a preliminary screen to highlight molecules that need further assessment by light models. In sum, these studies demonstrate that AAPH stress can be used in multiple ways to evaluate labile residues and oxidation sensitivity as it pertains to developability and manufacturability.

Selective and brain-permeable polo-like kinase-2 (Plk-2) inhibitors that reduce α-synuclein phosphorylation in rat brain.

Polo-like kinase-2 (Plk-2) has been implicated as the dominant kinase involved in the phosphorylation of α-synuclein in Lewy bodies, which are one of the hallmarks of Parkinson's disease neuropathology. Potent, selective, brain-penetrant inhibitors of Plk-2 were obtained from a structure-guided drug discovery approach driven by the first reported Plk-2-inhibitor complexes. The best of these compounds showed excellent isoform and kinome-wide selectivity, with physicochemical properties sufficient to interrogate the role of Plk-2 inhibition in vivo. One such compound significantly decreased phosphorylation of α-synuclein in rat brain upon oral administration and represents a useful probe for future studies of this therapeutic avenue toward the potential treatment of Parkinson's disease.

Design and synthesis of thiophene dihydroisoquinolines as novel BACE1 inhibitors.

Utilizing a structure based design approach, combined with extensive medicinal chemistry execution, highly selective, potent and novel BACE1 inhibitor 8 (BACE1 Alpha assay IC50=8nM) was made from a weak µM potency hit in an extremely efficient way. The detailed SAR and general design approaches will be discussed.

Structure-based design of novel dihydroisoquinoline BACE-1 inhibitors that do not engage the catalytic aspartates.

The structure-activity relationship of a series of dihydroisoquinoline BACE-1 inhibitors is described. Application of structure-based design to screening hit 1 yielded sub-micromolar inhibitors. Replacement of the carboxylic acid of 1 was guided by X-ray crystallography, which allowed the replacement of a key water-mediated hydrogen bond. This work culminated in compounds such as 31, which possess good BACE-1 potency, excellent permeability and a low P-gp efflux ratio.

Design and synthesis of highly selective, orally active Polo-like kinase-2 (Plk-2) inhibitors.

Polo-like kinase-2 (Plk-2) is a potential therapeutic target for Parkinson's disease and this Letter describes the SAR of a series of dihydropteridinone based Plk-2 inhibitors. By optimizing both the N-8 substituent and the biaryl region of the inhibitors we obtained single digit nanomolar compounds such as 37 with excellent selectivity for Plk-2 over Plk-1. When dosed orally in rats, compound 37 demonstrated a 41-45% reduction of pS129-α-synuclein levels in the cerebral cortex.

Design and synthesis of brain penetrant selective JNK inhibitors with improved pharmacokinetic properties for the prevention of neurodegeneration.

The SAR of a series of brain penetrant, trisubstituted thiophene based JNK inhibitors with improved pharmacokinetic properties is described. These compounds were designed based on information derived from metabolite identification studies which led to compounds such as 42 with lower clearance, greater brain exposure and longer half life compared to earlier analogs.