3D bioprinting of stromal cells-laden artificial cornea based on visible light-crosslinkable bioinks forming multilength networks.

3D bioprinting has the potential for the rapid and precise engineering of hydrogel constructs that can mimic the structural and optical complexity of a healthy cornea. However, the use of existing light-activated bioinks for corneal printing is limited by their poor cytocompatibility, use of cytotoxic photoinitiators (PIs), low photo-crosslinking efficiency, and opaque/colored surface of the printed material. Herein, we report a fast-curable, non-cytotoxic, optically transparent bioprinting system using a new water-soluble benzoyl phosphinate-based PI and photocrosslinkable methacrylated hyaluronic acid (HAMA). Compared with commercially available PIs, the newly developed PI, lithium benzoyl (phenyl) phosphinate (BP), demonstrated increased photoinitiation efficiency under visible light and low cytotoxicity. Using a catalytic amount of BP, the HA-based bioinks quickly formed 3D hydrogel constructs under low-energy visible-light irradiation (405 nm, <1 J cm-2). The mechanical properties and printability of photocurable bioinks were further improved by blending low (10 kDa) and high (100 kDa) molecular weight (MW) HAMA by forming multilength networks. For potential applications as corneal scaffolds, stromal cell-laden dome-shaped constructs were fabricated using MW-blended HAMA/BP bioink and a digital light processing printer. The HA-based photocurable bioinks exhibited good cytocompatibility (80%-95%), fast curing kinetics (<5 s), and excellent optical transparency (>90% in the visible range), potentially making them suitable for corneal tissue engineering.

Nanoporous electroporation needle for localized intracellular delivery in deep tissues.

The exogenous control of intracellular drug delivery has been shown to improve the overall efficacy of therapies by reducing nonspecific off-target toxicity. However, achieving a precise on-demand dosage of a drug in deep tissues with minimal damage is still a challenge. In this study, we report an electric-pulse-driven nanopore-electroporation (nEP) system for the localized intracellular delivery of a model agent in deep tissues. Compared with conventional bulk electroporation, in vitro nEP achieved better transfection efficiency (>60%) with a high cell recovery rate (>95%) under a nontoxic low electroporation condition (40 V). Furthermore, in vivo nEP using a nanopore needle electrode with a side drug-releasing compartment offered better control over the dosage release, time, and location of propidium iodide, which was used as a model agent for intracellular delivery. In a pilot study using experimental animals, the nEP system exhibited two times higher transfection efficiency of propidium iodide in the thigh muscle tissue, while minimizing tissue damage (<20%) compared to that of bulk electroporation. This tissue-penetrating nEP platform can provide localized, safe, and effective intracellular delivery of diverse therapeutics into deep tissues in a controlled manner.

User-demand fast-curable ocular glues enforced by multilength tunable networks.

Achieving fast and secure wound closure without ocular foreign body sensation is highly desired in ophthalmologic surgery. Sutureless approaches using tissue adhesives are gaining popularity, but their practical use is limited by the difficulty in controlling adhesion time and satisfying safety standards without compromising adhesive performance. Herein, we report user-demand hydrogel-forming ocular glues based on multilength photo-crosslinkable hyaluronic acid (HA), achieving firm tissue adhesion under wet and dynamic conditions and possessing cornea-like optical transparency. The HA-based photocurable glue (HA photoglue) quickly seals wounds upon nontoxic low-energy light exposure (320-500 nm, < 5 s, < 1 J cm-2), and its mechanical and adhesive properties are improved by introducing short and long crosslinkable moieties into HA through one-step synthesis, forming multilength networks. Furthermore, the HA photoglue provides stable sealing in wet environments like ocular mucous surface, a clear vision with a light transmittance of more than 95% over the entire visible range, and a lubricating surface with minimal ocular sensation (generating less than 10% frictional force than suture groups). In a rabbit corneal incision model, the HA photoglue showed improved wound healing efficacy based on histological evaluation compared to control groups.

Injectable Self-Crosslinkable Thiolated Hyaluronic Acid for Stem Cell Therapy of Atopic Dermatitis.

Stem cell therapies offer great promise in regenerative medicine to reinstate the normal function of diseased tissue, thereby avoiding the need for replacement. In stem cell therapies, damaged cells are replaced or restored by regulating inflammation and the immune system. However, the low survival rate and local retention of transplanted cells pose a significant challenge. In this study, injectable self-crosslinkable hydrogels using thiol-functionalized hyaluronic acid (HA-SH) were developed to improve the efficacy of mesenchymal stem cells (MSCs) for treating atopic dermatitis (AD)-related inflammatory lesions. The gelation kinetics and mechanical properties of HA-SH hydrogels were easily tuned by varying the concentration of the polymer in the precursor solution before injection. The MSC-laden HA-SH hydrogels exhibited high cell viability (>80%) for 1 week and good in vivo biocompatibility after implantation beneath the mouse skin. Moreover, the MSC-laden HA-SH hydrogel showed increased expression of anti-inflammatory cytokines, which can alleviate the immune response. In an AD animal model, a reduction in epidermal thickness and mast cell infiltration was achieved by applying a self-crosslinkable HA-SH solution including MSCs. This HA-based injectable hydrogel represents a potential carrier of stem cells, and its strong immunomodulation capabilities can be utilized for treating inflammation-related diseases.

On-site fabrication of injectable 131I-labeled microgels for local radiotherapy.

Nuclear medicine is a routine but essential clinical option for diagnostic imaging and disease treatment. Encapsulating radioisotopes in injectable biodegradable hydrogels is ideal for localizing radiation sources to target tissues or organs to achieve long-term, low-dose radiotherapy. However, difficulties in the on-site production of radioactive gels upon treatment and the unpredictable radiation level at the target region are major obstacles to their clinical use. In this study, we bypassed these limitations by developing locally injectable hydrogel microparticles based on 131I-labeled photo-crosslinkable hyaluronic acid (HA) and a microfluidic high-throughput droplet generator. This approach enabled rapid on-site production of injectable, radioactive, biodegradable (IRB) HA microgels, thus allowing their immediate therapeutic application with improved local retention and predictable radioactivity. We demonstrated the clinical utility of this comprehensive approach by preparing IRB HA microgels within 15 min and localizing them to the target tissue (rat muscle) with minimal off-target biodistribution and in vivo radioactivity that extended beyond 3 weeks.

Acid-Treated Water-Soluble Chitosan Suitable for Microneedle-Assisted Intracutaneous Drug Delivery.

Chitosan has been widely used as a nature-derived polymeric biomaterial due to its high biocompatibility and abundance. However, poor solubility in aqueous solutions of neutral pH and multiple fabrication steps for the molding process limit its application to microneedle technology as a drug delivery carrier. Here, we present a facile method to prepare water-soluble chitosan and its application for sustained transdermal drug delivery. The water-soluble chitosan was prepared by acid hydrolysis using trifluoroacetic acid followed by dialysis in 0.1 M NaCl solutions. We successfully fabricated bullet-shaped microneedle (MN) arrays by the single molding process with neutral aqueous chitosan solutions (pH 6.0). The chitosan MN showed sufficient mechanical properties for skin insertion and, interestingly, exhibited slow dissolving behavior in wet conditions, possibly resulting from a physical crosslinking of chitosan chains. Chitosan MN patches loading rhodamine B, a model hydrophilic drug, showed prolonged release kinetics in the course of the dissolving process for more than 72 h and they were found to be biocompatible to use. Since the water-soluble chitosan can be used for MN fabrication in the mild conditions (neutral pH and 25 °C) required for the loading of bioactive agents such as proteins and achieve a prolonged release, this biocompatible chitosan MN would be suitable for sustained transdermal drug delivery of a diverse range of drugs.